Automatically displaying customer details but with the customer selection by passed.

Clumsy title but it's hard to describe what I'm trying to do in a few words.
I want to have a Display customer function that when the button is clicked, the user is presented with the list of customer via the standard SAP match code, but when they select one, it script goes straight on and displays the detail, and the matchcode search confirmation screen is by-passed.
A few more words perhaps ..... I want the script to pause and allow the user to make a selection from the matchcode list, and then resume....
Anyone?
Regards.
Patrick.

Driving the standard F4 help dialogs via a script doesn't seem to work too well. I've tried to do something very similar to you and failed with the F4 help popups. Instead I use "list display" transactions (and where they don't exist, I write them - simple ALV reports aren't difficult). You can then drive them via a script as I describe in this blog - Transaction-free lookup with Personas.
In my case, I copy data back from the list display to the screen I came from. In your case, selecting a line from the ALV could go straight to the customer display transaction and skip the initial screen by pasting in the customer number from the selected line in the ALV.
Hope I understood you scenario properly! If not, get back to me
Steve.

Similar Messages

  • I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

  • My phone keeps displaying a white screen with the apple, then occasionally flicks to a blue screen, but won't turn on! HELP!!

    My phone keeps displaying a white screen with the apple, then occasionally flicks to a blue screen, but won't turn on! HELP!! I have had it on charge all day and have tried plugging it in to my computer to sync.

    Restore your software using iTunes.
    Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings.
    You should be able to restore your backup file after this procedure. If the problem comes back, you either have corruption in your backup file, or a serious hardware problem that should be looked at by a tech at the Genius Bar (make an appointment first).

  • How to use iMovie 08 with Drobo FS?  Drobo shows up in the Events Library but with the yellow triangle.

    I have an iMac and a Drobo FS.  The iMac can access the Drobo FS but iMovie does not allow me to select it as a storage location.  The Drobo shows up in the Events Library but with the yellow triangle.  I am running iMovie 08.  Any help would be appreciated.  Thanks!

    As far as I know you cannot use a Drobo FS with iMovie.
    For iMovie events the storage drive needs to be formatted as "Mac OSX Extended - Journaled" this is the HFS+ file system.
    The Drobo FS uses the EXT3 file system, and it cannot be changed.
    Very annoyingly this means that iMovie can only be used with a drive that is using the HFS+ file system.
    I have a Drobo FS that I use with both PC's and Macs - and I love it. Sadly I cannot use iMovie with it. So I purchased a seperate Hard Drive - A G-Tech 3 Tb - and this works fine with iMovie.
    As far as I know the FS Drobo's are the only ones that cannot be formatted to HFS+.
    I don't know why Apple designed iMovie like this, but I find it very frustrating.
    If you want extra storage for iMovie, you will need to purchase a drive that can be HFS+ formatted.
    Here is a link to the Drobo site with the various file systems that they support:
    http://support.drobo.com/app/answers/detail/a_id/29/kw/file%20system
    Good luck.

  • Ipad air display not charging message with the original 12w wall charger

    my ipad air display not charging message with the original12w wall adapter but when i use asus ai charger (program for pc to charge the ipad)it charge normaly without display not charging  any solution

    Most computer USB port do not supple enough current to charge the iPad.

  • I recently purchased FaceTime from the Application Store. After approx. ±10 meg, the application resets and starts downloading again. I have tried to download it at different times of the day but with the same results. I have been in contact with Apple su

    I recently purchased FaceTime from the Application Store. After approx. ±10 meg, the application resets and starts downloading again. I have tried to download it at different times of the day but with the same results. I have been in contact with Apple support and have tried different options with the same result. I cannot download a new Version because in my Purchased List the applicaiton (FaceTime) is still there, and because I have halted it it tells me to resume. I can’t, because the same thing is going to happen. I have tried all the various troubleshooting tips supplied by my ISP and also Apple Support with no luck. I am currently working on a IMac OS 10.6.7. Has anybody got any ideas? Any suggestion would help. Thanks

    Amol Soni wrote:
    As I said, I tried everything what the manual says, but hard luck. I have taken an appointment for today, lets see what happens.
    Also there is no activity on unit when I use the remote. The unit is stuck on the first page itself where we have to choose the language. The unit seems to be fine to me but the real problem is remote does'nt have activity. The IR is not responding while pressing any of the button.
    Good luck with your appointment.
    Not much consolation but even new products can have issues and might need a trip to a store to return/replace.
    The reason i asked about the LED on the AppleTV is that occasionally it thinks it's paired with a specific remote and ignores others - the unpair keypress I described is quick and free.
    AC

  • Just updated my iphone. Now I can se I have two? iCloud accounts? One of them appears on my phone, and I have forgotten the password. When I try to add the other account, I get the message that this account is already added, but with the name of the first

    Just updated my iphone. Now I can se I have two! iCloud accounts? One of them appears on my phone, and I have forgotten the password. When I try to add the other account, I get the message that this account is already added, but with the name of the first account where there is no available password. I have tried several times to reset the password, bun I don't get the information I need - I have no access to email. What can I do?

    Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
    Anything else I could try, or am I doomed!
    All of your help is much appreciated, thanks

  • My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery."  My question is: how to fix this?

    My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery."  My question is: Why is this happening and how do I fix it? (I'm losing battery power precipitously). Thanks in advance for any assistance with this question.

    Thanks Kilted Tim, you solved the problem. I'm mightily impressed at the simplicity of the solution!
    Jaded Kane

  • I am trying to install xcode on a macpro running OSX 10.6.8 .  It installs, but with the error that there is no unix support.Do I have to upgrade to Lion 10.7 to do this? And if so, is this a free upgrade if I have the extended 3 yr support?

    I am trying to install xcode on a macpro running OSX 10.6.8 .  It installs, but with the error that there is no unix support.   Do I have to upgrade to Lion 10.7 to do this? And if so, is this a free upgrade if I have the extended 3 yr support?
    thx,
    Pandabig

    Xcode 4.x cannot be installed on Snow Leopard.  You need a 3.x.  So if that is what you used then yes, you need to install lion.   If connect.apple.com still alows registration or logins using an existing appleid then you could download the last xcode 3.2.6 for free.

  • Droid Razr M, but with the new Kitkat update problems

    Droid Razr M, but with the new Kitkat update, my phone has had inumerable new problems...someone help, battery overheats phone and kills it in 4 or 5 hours on a full charge, screen wont unlock when its on standby, rebooting the phone takes a long time to warm up, and text messages taking longer and longer to send, now at 12 hours
    someone help!!!

    Yea I understand Kit Kat the OS has not been the Tasty treat to many of us cellphone users that the candy is.. and to me as before with problem OS's one's whom are in charge to fix the issue are not doing enough Quickly.. which make using the Device harder each Day..
    Hope soon Days are brighter for our phones.. Apart from that have a Great Weekend   for me I'm ready for some Football

  • Hi, I having trouble trying to connect to the wifi, I know the passwords and checked with others divises but with the mac os x 10.7.5  mac os x lino

    Hi, I having trouble trying to connect to the wifi, I know the passwords and checked with others divises but with the mac os x 10.7.5  mac os x lion is not working
    One of the wifi connections said "time out" or did not recongnise the password

    Hi andrea122,
    Thanks for visiting Apple Support Communities.
    If you're not able to connect to Wi-Fi on your iMac, the troubleshooting steps in this article can help:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Regards,
    Jeremy

  • Bought a albume on a diffrent computer but with the same account, but the album doesn't come up in the bought list on the other computer?

    So as I said I bought it on a diffrent computer but with the same account, and when I sign in on my other computer with the account, it doesn't show up in the bought list, help?

    What "bought list"?
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I use photoshop CS3. Shortly, when I try to use one of the tools, they react only with the eraser. So I cannot use the other tools. I tried to reset in general preferences all warnings. Then I can use the tools again, but with the next picture I get stuck

    I use photoshop CS3. Shortly, when I try to use one of the tools, they react only with the eraser. So I cannot use the other tools. I tried to reset in general preferences all warnings. Then I can use the tools again, but with the next picture I get stuck with the eraser again. What can I do? Joost van Santen

    Have you tried resetting all tools?

  • In deleting an i message  the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

    in deleting an i message  the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • I previously made an iMovie project, but with the new version of iMovie (10.0.1) it does not have the option to import. How do I retrieve my old iMovie project?

    I previously made an iMovie project, but with the new version of iMovie (10.0.1) I cannot import the project. How do I retrieve and import my old iMovie project?

    You have to upgrade your iMovie 9 projects from iMovie 10 before you can use them.  See:
    http://help.apple.com/imovie/mac/10.0/#mov902ad0c31
    Geoff.

Maybe you are looking for