Automatically invisible from my desktop netweaver installation wizard

Dear all ,
automatically invisible installation wizard from my monitor while sapinst.exe runing in taskmanager.
thx
ashish

Hi Chandrish Meganathan,
I have restarted the system but i got nothing result.
Thx
ashish

Similar Messages

Error Installing Adobe Air from Story Desktop Application Installer

This is truly driving me nuts already.
Every time I try to install the Desktop Application from the Story website, it says I must install Adobe Air. So I click Install, it shows the progress bar to 100%, then errors out with a window. The window header reads "Adobe AIR Installer" and the main section of the window reads "Couldn't write the application to the hard disk. Please verify the hard disk is available and try again." - There is a Retry and Cancel. Retry does it all again with same results.
No, I had no previous versions of Adobe Air. So I tried installing AIR direct from the Adobe website, and it installs fine. So I go back to the Story webpage and try installing the Desktop Application again and the exact same set of events as described above happens. I uninstalled the AIR install, tried again, same result.
I had Production Premium CS3 previously, and installed Production Premium CS5 UPGRADE. All the programs in the suite work like a charm!
I'm running Windows 7 64 bit with 208 Gig free on my C drive, as well as over 500 gig free spread out over two other drives. 8 Gig memory, and two Nvidia Qadro FX 3500 video cards (If that matters at all). Full admin rights to the PC, not limited in any way.
A quick Google search shows plenty of other people having the same problem, just no known fixes I've found!
HELP!!!
PS- I have a picture of the error message, but the insert picture link is greyed out and won't let me add anything to this post.

Here is the installer log entries as requested:
9/3/10 11:34:54 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] Starting app install of file:///Users/Shared/Downloads/AdobeStory.air
9/3/10 11:34:54 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] UI SWF load is complete
9/3/10 11:34:55 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] UI initialized
9/3/10 11:34:55 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] beginning UI styling
9/3/10 11:34:55 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] UI styling complete
9/3/10 11:34:55 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] Unpackaging to /private/var/folders/dJ/dJl0jNt6GK4MiC2esOh-GU+++TM/TemporaryItems/FlashTmp0
9/3/10 11:34:58 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] unpackaging/validation is complete
9/3/10 11:34:58 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] application is bound to this version of the runtime
9/3/10 11:34:58 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] app id com.adobe.AdobeStory
9/3/10 11:34:58 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] pub id 4875E02D9FB21EE389F73B8D1702B320485DF8CE.1
9/3/10 11:34:58 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] Application located at /Applications
9/3/10 11:34:58 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] The certificate of the installed app fails to match either the signature or migration signature of the AIR file
9/3/10 11:35:01 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] starting cleanup of temporary files
9/3/10 11:35:02 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] application installer exiting
9/3/10 11:35:02 AM /Applications/Utilities/Adobe AIR Application Installer.app/Contents/MacOS/Adobe AIR Application Installer[344] application installer exiting
9/3/10 11:35:02 AM com.apple.launchd[223] ([0x0-0x40040].com.adobe.air.ApplicationInstaller[344]) Exited with exit code: 9
Thank you for your help.

Internet connectivity possibly lost after running installation wizard from Linksys CD

I have home network system that contains:
Windows Vista Ultimate 64 bit SP2 laptop
MAC computer
Both computers connected to D-Link Router and thus to the Internet.
When I attempted to replace D_Link router with WRT160N the following happen:
At first the laptop was able to connect to the Internet. Then I ran installation wizard from the CD that came with WRT160N. When the installation crashed I tried again and eventually the installation succeeded. After the installation the laptop was no longer able to connect to the Internet.
The MAC computer was still able to connect to the Internet.
I switched back to D_Link router. Both, the MAC and the laptop are now able to access the Internet.
Please help!
Thank you.

It might be the case that your Mac computer is connected to some other network.
Are you able to see your network name on your Windows computer ?
Try to readjust the wireless settings manually on the router and reconnect both the computer to your network
Note** Do all the settings from the wired computer(computer connected to the router via cable).
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Will icloud automatically pull the songs from my desktop so I can sync on my laptop?

Will icloud automatically download the songs from my desktop that I put in my itunes account?

No.
Take a look at iTunes Match service:
http://www.apple.com/itunes/itunes-match/

Installation wizard is going to the background when opened automatically

Hi,
I am using Safari to download a dmg file. The size of the dmg file is only 2 MB.The dmg file is proper and it contains a valid software installation.
In safari, the setting for opening the downloaded file is set.
Problem:
When i download the dmg file, the dmg is mounted and the .pkg file is launched to open the software installation wizard. But the installation wizard is always going behind the web browser and the user cannot see the installation wizard. This behaviour is observed only in Mac OS 10.6 and 10.6.2. This behaviour is not observed in Mac OS 10.5.6.
Please let me know why the installation wizard losing focus and going behind the browser when the dmg is downloaded and mounted.
Thanks,
Ramadevi.

Dear Pat,
We have internet explorer 9.0 (and we tried it with 10) and when we want to proceed with it, it opens for a second an goes to the background.
So it opens in the External Adobe Reader. But i know we can alt-tab it but it needs to be automatically and that worked just with Reader 8.
So do you have any idea of how we can fix this or is there a workaround available for this problem.
Kind regards,
Tariku Bartels

How to create unistaller through B1DE installer wizard

Dear User,
I have developed an add-on through B1DE code generator wizard and installer wizard, it successfully installs in SAP business one but when i want to uninstall it, i have to remove it manually by deleting *.sbo files and deleting it from SARI table and also from business one add-on folder. Is there any way to automatically create its uninstaller through wizard? like i created installer through installer wizard.
Any help is appreciated,
Thanks,
Farhan

Thanks Trinidad,
Problem is almost solved but just to confirm one thing so that i can mark this post as "Solved problem"
In the ard file generation window (found in SAP business one sdk tools > AddOnRegDataGen.exe), i want to confirm the parameter for install and uninstall. the command line argument for install is /z and for uninstall is /x ? am i right??
Your reply is ver much appreciated.
Thanks n regards,
Farhan

NetWeaver Installation SAPgui 7.30 problem

Hi,
we are not able to installa SAPgui from NetWeaver Installation... with manual installation works fine.
Have you got any idea?
Logic error: BaseVersion=2114 > Version=901 in component $SAPWUS Configurations ({41D37BB1-B482-41BC-A1A4-B3662A55A021})
09:35:54 NwSapsAtlC 1E Server Path C:\Program Files (x86)\SAP\SAPsetup\Setup could not be found: Error message: Impossibile trovare il file specificato. Error code 0x00000002 (2).
09:35:54 NwSapsAtlC 1   Reboot Manager: Evaluated the position of SAPSetup's OnReboot Installation Service as:
                          Folder 'C:\Program Files (x86)\SAP\SapSetup\OnRebootSvc'
                          Service File Path: 'C:\Program Files (x86)\SAP\SapSetup\OnRebootSvc\NWSAPSetupOnRebootInstSvc.exe'
09:35:55 NwSapsEngn 1E Component '{5C4D15BE-7199-4927-9E63-7A0E0CA207D4}' required on server has definition missing Error message: Dati non validi. Error code 0x0000000d (13).
09:35:55 NwSapSetup 1   Engine execution failure.
12:26:38 NwSapsAtlC 1E Server Path C:\Program Files (x86)\SAP\SAPsetup\Setup could not be found: Error message: Impossibile trovare il file specificato. Error code 0x00000002 (2).
12:26:38 NwSapsAtlC 1   Reboot Manager: Evaluated the position of SAPSetup's OnReboot Installation Service as:
                          Folder 'C:\Program Files (x86)\SAP\SapSetup\OnRebootSvc'
                          Service File Path: 'C:\Program Files (x86)\SAP\SapSetup\OnRebootSvc\NWSAPSetupOnRebootInstSvc.exe'
12:26:38 NwSapsAtlC 1   Reading OnReboot Install Service Configuration from 'C:\Program Files (x86)\SAP\SapSetup\OnRebootSvc'
12:26:40 NwSapsAtlC 1   Collected 1 components from '\\server\SAPISVR\Setup\SapWUSSetup.xml'
12:26:40 NwSapsAtlC 1E Logic error: BaseVersion=2114 > Version=901 in component $SAPWUS Configurations ({41D37BB1-B482-41BC-A1A4-B3662A55A021})
12:26:40 NwSapsAtlC 1E DM: Component Creation in Error
12:26:40 NwSapsAtlC 1   Collected 1 components from '\\server\SAPISVR\Setup\SapWUSShared.xml'
12:26:40 NwSapsAtlC 1
12:26:40 NwSapsAtlC 1   '\\server\SAPISVR\Setup\SapPackageSetup.xml' contains a package named 'FULL-730' that consists of:
12:26:40 NwSapsAtlC 1   FULL-730 (Version 9)
12:26:40 NwSapsEngn 1E Component '{5C4D15BE-7199-4927-9E63-7A0E0CA207D4}' required on server has definition missing Error message: Dati non validi. Error code 0x0000000d (13).

Hi Ganimede,
SAP Setup is complaining about the "SAP Automatic Workstation Update" component because
of the BaseVersion difference between the component $SAPWUS being collected in file SapWusShared.xml and the version of the baseversion of the patch version you used to create your frontend package mismatch. (BaseVersion=2114 > Version=901) This does only work if the original version is not too old.
Please try downloading the NW 7.0 Presentation 7.30 Compilation 3 and migrate your existing server according to note 1266552 (Migrating an Installationserver to a new Compilation)
Compilation DVD 3 is available at [service.sap.com/installations]
-> Entry by Application Group
-> SAP Frontend Components
-> SAP GUI FOR WINDOWS
Then recreate your package.
Kind regards,
Eric

Upload from Palm Desktop 4.1 to Palm Centro

My old Palm Pilot M515 broke some two years ago. I am maintaining the Contacts ("Address" on Palm Desktop under Widows XP Pro) on Palm Desktop version 4.1 and extensively using the "Note" tab to enter free form information.
a. Can I upload the Addresses from Palm Desktop 4.1 to Palm Centro which I am considering to purchase?
b. Will the free form information from "Note" upload fully to Palm Centro and where to?
Thanks.
Post relates to: Palm m515

Hi, and welcome to the Palm Community Forums.
Your existing data including the notes from your existing contacts database should migrate without difficulty to the new Palm Desktop which ships with the Centro. When you install the new version, it recognizes the existing installation and will automatically migrate the data.
On the device itself, if there is a Note attached to a particular contact, the contents of the Note actually display as part of the contact, at the end of the listing. You can add or delete a note for a contact directly on the device as well.
Post relates to: None
Message Edited by smkranz on 11-26-2008 06:36 AM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Invisible icons on DESKTOP

although i know for a fact that a certain file is on my desktop, since its listed in my Finder, i cannot drag/drop/copy/erase ANYTHING onto/from my desktop because it either goes back to its original folder or ends up in smoke "the poof cloud"... even a simple "screen capture" image which always go to the Desktop by default is INVISIBLE to the naked eye but exists on the Finder!
i think i made a keyboard shortcut action while trying to remember the screen capture and maybe ended up activating "invisibility" to my desktop, or something! its frustrating because i use a lot of my desktop area to copy/paste files, or eject a dvd, or install DMG programs so i googled and read a lot about possible "invisibility" function within a TERMINAL command but all i can manage to do is list my HD directories with the command "ls -a ~/Desktop" but i wont adventure further because a n00b like me is to afraid of recking my new mac!
HELP!!!

Maybe I can clarify since im having the same issue. Whe I save a pdf or any other file to my desktop from safari the file does not show up visible on the desktop...... the file is there in the desktop folder but cant be seen. I can do a search for it in spotlight and it is there I can even drag it from the spotlight window to the desktop and it shows up. Have you tried a spotlight search. I would like to know if there is a fix for this as it becomes very tiresome to save the file somewhere else and then move it

How to transfer adobe acrobat XI registration from one desktop to another (bought new PC).

how do you transfer adobe acrobat XI registration from one desktop to another (bought new PC). Need to use ASAP!

Hi jaanders2,
The licensing agreement allows you to activate Acrobat on up to two computers. So, if you've only activated in your old computer, you simply need to install and activate Acrobat on the second computer. If you no longer have the installer file or installation media, you can download Acrobat from here: Download Acrobat products | Standard, Pro | XI, X - Adobe
If you need your serial number, this document will help you track it down: Find your serial number quickly - Adobe
And this document, will walk you through the activation process: Activation & Deactivation Help
Please let us know if you need additional help.
Best,
Sara

Cannot Delete .fpbf File from my Desktop

I tried burning photos onto a CD a few weeks ago and the burn failed. I now have a .fpbf file on my desktop, that shows all the pic files, but appears to be empty. When I click on the pic files, I get the following message: "The alias “Beautiful LuLu.JPG” can’t be opened because the original item can’t be found."
When I try to delete the .fpbf file, or drag it into the Trash folder, I get asked to input my password, and nothing happens.
How can I delete this unused folder from my Desktop?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Then do a Get Info on both your Desktop folder & that file, what rights does it show for them? Are they locked?
Might try Trash it...
http://download.cnet.com/Trash-It/3000-2094_4-25829.html

I keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get it when I either try to open it from the Start menu or from the desktop icon.

I've just installed Firefox on my laptop and keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get this message whenever I either try to open it from the Start menu or from the desktop icon. I've never gotten it to work and even uninstalled it and then redownloaded it and still cannot get it to open. Any help would be greatly appreciated!!!!

Are you installing from the official site? http://www.mozilla.com/firefox
If you use Windows Explorer (My Computer) to check that path, is the Mozilla Firefox folder there? That is the normal installation location, but I think it's worth checking.
If the folder isn't there or firefox.exe is not in it, I wonder whether some other software might be interfering. You might want to run some supplemental security scans. These two tools are highly regarded:
Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware : http://www.superantispyware.com/

I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working.

I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working. Any ideas?

You need to install Office on the computer from the installer DVD or disc image you purchased.

I changed permission setting on main disk...took forever now when I bootup I get the chime...apple icon...fan noise...thats it...internal drive is broken...no Mac install disk..I have a windows XP desktop with installation disk..if I was to get external d

I changed permission setting on main disk...took forever now when I bootup I get the chime...apple icon...fan noise...thats it...internal drive is broken...no Mac install disk..I have a windows XP desktop with installation disk..if I was to get external drive ...could I use windows XP styartup disk just to boot the "17"Powerbook-G4...have no intention of downloading XP on the Mac...just want to boot it up...or is there a way to boot the Mac from the XP desktop...cables...etc?

Hi Romko23, just pasted info from manual...PowerBook G4 "17" 5.3
Your PowerBook comes with a minimum of 512 megabytes (MB) of 533
MHz Double Data Rate (DDR2) Synchronous Dynamic Random-Access Memory
(SDRAM) installed. Both memory slots can accept an SDRAM module that meets the
following specifications:
Â Double Data Rate Small Outline Dual Inline Memory Module (DDR SO-DIMM) format
Â 1.25 inch or smaller
Â 512 MB or 1 gigabyte (GB)
Â 200-pin
Â PC2-4200 DDR2 533 MHz Type RAM
PS my keyboad is loose...I tighten the tiny screws...only...once ...tried all the key-strokes...Comand-option..P-R.....safe-mode... etc...Mac only reacted ...once...right after.. I tightend K-board >>C-OpT- P-R...mac chimed twice...the Apple icon in grey screen got smaller....now after trying ...keyboard .boot short cuts 10 times..nothing...it chimes ...grey screen....apple in window...fan noice ....thats it...do you think I need to tighten screws...again,
I actually think when I was changing permissions...on entire it was taking so ong...20 min...I just hit power,,shut it down...when it wasn't done...no patience.,...just thought of something ...sounds important...whern I resgisted on this site..I tried to use my Powrbook login name ..got message.... .. blocked...Secury problem....that has to be the problem..blocked..how do I unblock?
Message was edited by: CMK1

Creative Cloud Desktop App installer crash (Mac OSX)

I wanted to update my existing CC Desktop App, but that didn't work out, so I uninstalled it, and tried to reinstall. But that brought me into a whole other world of pain and tears.
Basically, when I finally worked out where I could download the .dmg (hint: if you try to download the desktop app installer through chrome on mac, you'll get the .exe), and I ran the installer, and just says this: "Downloading Creative Cloud Desktop App" and then promptly crashes, leaving no trails behind. I cleaned my mac from old logs and whatnot, did not work. I ran Creative Cloud Cleaner Tool, that just deleted all my existing CC programs so I can't even work with those anymore, but the cleaner provided nothing to let the Desktop app installer actually work.
I have a Mid 2012 Macbook Pro "13, Mac OSX 10.9.5, 2.5 GHz i5, 8GB RAM. I've had virtually no problems with Creative Cloud, except After Effects 2014, which could never complete an update.
I suspect I need some kind of "offline" installer for the Desktop app.

SkyOtic if you are being offered an exe by Chrome then I would recommend reviewing your web browser settings and add-ons. It appears that Chrome is currently identifying your computer as utilizing a Windows operating system.
Please download and install the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop. I would strongly you recommend the use of a different web browser unless you have corrected the behavior occurring within Chrome.
If you continue to face difficulties then I would recommend reviewing Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html.

Automatically invisible from my desktop netweaver installation wizard

Similar Messages

Maybe you are looking for