Automatically logout during idle

My laptop has a problem that, when it is idle (with xscreensaver), after around half an hour, the laptop will be automatically logout to the login manager.
When the logout happened, it shows also the systemd services screen.
This is very troublesome if I am away and let my laptop to process something.
Does anyone know what is the cause and how to solve this?

This is the Xorg.0.log.old,
[ 15322.984]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 15322.984] X Protocol Version 11, Revision 0
[ 15322.984] Build Operating System: Linux 3.15.5-2-ARCH i686
[ 15322.984] Current Operating System: Linux my-arch 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:48:39 CEST 2014 i686
[ 15322.984] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7ac88b34-65ed-4bc3-b148-0d4812bc6bea rw init=/usr/lib/systemd/systemd rw resume=/dev/disk/by-uuid/96f8e264-703d-4668-a028-683201fc3b4e
[ 15322.984] Build Date: 31 July 2014 11:55:52AM
[ 15322.984]
[ 15322.984] Current version of pixman: 0.32.6
[ 15322.984] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15322.984] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15322.984] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 15 14:48:22 2014
[ 15322.984] (==) Using config file: "/etc/X11/xorg.conf"
[ 15322.984] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15322.984] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 15322.985] (==) No Layout section. Using the first Screen section.
[ 15322.985] (**) |-->Screen "Screen0" (0)
[ 15322.985] (**) | |-->Monitor "Monitor0"
[ 15322.985] (**) | |-->Device "Device0"
[ 15322.985] (==) Automatically adding devices
[ 15322.985] (==) Automatically enabling devices
[ 15322.985] (==) Automatically adding GPU devices
[ 15322.985] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15322.985] Entry deleted from font path.
[ 15322.985] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15322.985] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/
[ 15322.985] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15322.985] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15322.985] (II) Loader magic: 0x82a0700
[ 15322.985] (II) Module ABI versions:
[ 15322.985] X.Org ANSI C Emulation: 0.4
[ 15322.985] X.Org Video Driver: 18.0
[ 15322.985] X.Org XInput driver : 21.0
[ 15322.985] X.Org Server Extension : 8.0
[ 15322.988] (EE) systemd-logind: failed to get session: PID 13284 does not belong to any known session
[ 15322.988] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 15322.988] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 15322.991] (--) PCI:*(0:0:2:0) 8086:0166:1028:0584 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 15322.991] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15322.991] (II) LoadModule: "glx"
[ 15322.991] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15322.993] (II) Module glx: vendor="X.Org Foundation"
[ 15322.993] compiled for 1.16.0, module version = 1.0.0
[ 15322.993] ABI class: X.Org Server Extension, version 8.0
[ 15322.993] (==) AIGLX enabled
[ 15322.993] (II) LoadModule: "intel"
[ 15322.993] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 15322.993] (II) Module intel: vendor="X.Org Foundation"
[ 15322.993] compiled for 1.16.0, module version = 2.99.914
[ 15322.994] Module class: X.Org Video Driver
[ 15322.994] ABI class: X.Org Video Driver, version 18.0
[ 15322.994] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 15322.994] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 15322.994] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 15322.994] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 15322.994] (++) using VT number 1
[ 15322.994] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 15325.268] (EE) intel(0): [drm] failed to set drm interface version: Permission denied [13].
[ 15325.268] (EE) intel(0): Failed to claim DRM device.
[ 15325.269] (EE)
[ 15325.269] (EE) Backtrace:
[ 15325.269] (EE) 0: /usr/bin/Xorg.bin (xorg_backtrace+0x52) [0x81de282]
[ 15325.269] (EE) 1: /usr/bin/Xorg.bin (0x8048000+0x19a502) [0x81e2502]
[ 15325.269] (EE) 2: linux-gate.so.1 (__kernel_rt_sigreturn+0x0) [0xb77c4d34]
[ 15325.269] (EE) 3: /usr/lib/libc.so.6 (cfree+0x26) [0xb7392086]
[ 15325.269] (EE) 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb6aed000+0x63f8e) [0xb6b50f8e]
[ 15325.269] (EE) 5: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb6aed000+0x67541) [0xb6b54541]
[ 15325.270] (EE) 6: /usr/bin/Xorg.bin (xf86DeleteScreen+0x67) [0x80c4f47]
[ 15325.270] (EE) 7: /usr/bin/Xorg.bin (InitOutput+0xb5f) [0x80be31f]
[ 15325.270] (EE) 8: /usr/bin/Xorg.bin (0x8048000+0x3555a) [0x807d55a]
[ 15325.270] (EE) 9: /usr/bin/Xorg.bin (0x8048000+0x1f72a) [0x806772a]
[ 15325.270] (EE) 10: /usr/lib/libc.so.6 (__libc_start_main+0xde) [0xb7333e2e]
[ 15325.270] (EE) 11: /usr/bin/Xorg.bin (0x8048000+0x1f758) [0x8067758]
[ 15325.270] (EE)
[ 15325.271] (EE) Segmentation fault at address 0x870c0e3d
[ 15325.271] (EE)
Fatal server error:
[ 15325.271] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 15325.271] (EE)
[ 15325.271] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 15325.271] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 15325.271] (EE)
[ 15325.283] (EE) Server terminated with error (1). Closing log file.
Does anyone have any idea what is that segmentation fault?

Similar Messages

Servermgrd Exception during idle processing: couldn't spawn task

Hello,
we recieve every 2 seconds the following message in the system.log
Sep 15 11:17:13 xxxxx servermgrd[100]: Exception during idle processing: couldn't spawn task: path = /usr/bin/ftpcount, errno 24
bash-3.2# /usr/bin/ftpcount
Service class realusers - 0 users ( 50 maximum)
Service class anonusers - 0 users ( 50 maximum)
don't know why this error occurs, anybody out there who knows whats happend there?
thx+cheers./c

Hi,
We're running Server 10.5.4 on a G4 Xserve.
Typically, our "once a week" problem is a failure of the DirectoryService process. Occasionally, our bootpd.plist file will revert to defaults and we lose all our DHCP settings.
Today, I got to experience one part of your problem - the inability to access the server via the Server Admin GUI and the server admin web site (https://localhost:311). Typically, we have that problem when DirectoryService fails, since we can no longer authenticate as a user of those services.
This time, I was surprised to find that authentication wasn't the problem.
Although I don't have a real fix for you, I was able to get servermgrd running again by simply quitting it from Activity Monitor.app. Launchd just restarts the service for you automatically. You should be able to accomplish the same thing with +killall servermgrd+. At the very least, this could save you from having to reboot.
If you're a scripter, you could probably write one that automatically does the killall for you when servermgrd goes flakey.
Regards,
Lyle Millander

How to Automatically Logout Users

We recently created user accounts to enable parental controls for our teens. Very often, someone in the house will have used the mac, but forgets to logout from their account. Since there are different restrictions on different accounts, I would like to find a way to automatically log a user out after inactivity (especially if it is the admin user that has forgotten to log out, as we have NO parental controls!!). I have gone to system prefs and under security have set the automatic logout after 10 minutes of inactivity, but it did not log the user out. It seemed to put the computer to sleep, but NOT log the user out. Help?!?

Hmm ... I found this in the Help files:
+IMPORTANT: You should save any documents you’ve changed and close any applications that may present a dialog before closing. If any dialogs for unsaved documents or open applications appear during the log out, your computer will not finish logging you out.+
Is it possible that you hadn't saved all of your work or that one of your apps had a dialog box showing? Alternatively, Fast User Switching may work better for you. Here's what the Help says about that:
+When a user logs out of the computer, any open documents and applications close. If you want to allow multiple accounts to be running at the same time, you should allow “fast user switching.”+
+When fast user switching is turned on, the name of the current user is displayed in the upper-right corner of the menu bar. You can click the name to select another user to switch to.+
Fast User Switching would eliminate the need to log out when leaving the computer; simply go up to where it gives the name of the account on the top right corner of the screen and select Login Window. All users remain logged in, even when another user is working in a different account, until someone either logs out or the computer is restarted. To enable this, go to System Preferences > Accounts. Then click on Login Options at the bottom of the list of accounts. On the right, check the box that says Enable Fast User Switching and select the view you'd like to see in the menu bar.
I hope this helps!
Message was edited by: Sandra Foster
Message was edited by: Sandra Foster

DSC and security features: automatic logout

Hello,
I'm using the security features of LabVIEW 8.5.1 and the DSC module.
Does someone know how to enable the automatic logout feature (logout after a specified time without user interaction)?
Thanks in advance.
Tom
Solved!
Go to Solution.

Hello Ben,
meanwhile a NI-Support-Engineer provided an answer for that issue:
If you are using LabVIEW DSC 7.1 there should be an
option in the menu where you can set the minutes of inactivity
until the automatic logout.
In LabVIEW 8.x you will have to implement this on your
own. There is a VI that will do the logout itself but the
timing needs to be implemented by yourself.
So Ben, you are right: this functionality is simply not available anymore in LabVIEW 8.x!
There is an KnowledgeBase document targeting that problem:
http://digital.ni.com/public.nsf/allkb/0A8C5B624365A25E8625721100548970?OpenDocument
but the contained example VI doesn't make too much sense.
The problem is that the DSC_Lougout.vi ignores the "idle" in "Minutes idle until logout". It simply logs out the user after a specific time elapsed without considering if the user is still active.
Regards,
Thomas

Automatic logout on Macintosh computers

Hi there,
I have been asked to investigate how to automatically logout Macintosh computers from Bordermanager.
Currently, all of our copies of Firefox and Safari on those computers have a Bordermanager logout bookmark (pointing to proxy:1959/cmd/BM-Logout.htm). However frequently users fail to click this before leaving the computer, which means the next user can use up the previous user's entire data allocation.
My line of thinking is that the answer lies in Macintosh login/logout hooks, which are simply command line scripts that run on login and logout. So my theory is if we can load the Bordermanager logout page from the command line, then we should be able to force a disconnection from the server when a user logs in or out.
I was going to experiment with using 'wget' but I thought I had better run it past the Bordermanager community first to see if someone had done this before, and if so, how did they do it?
Thanks in advance,
Erik

In article <[email protected]>, Earok wrote:
> effectively a Macintosh equivalent of dwntrust.
>
I just realized something here, and thought it would be good to clarify
for anyone reading this. (Especially since I just had a call today on
this very subject).
Running dwntrust removes clntrust from the windows system tray/stops
running clntrust. This does NOT clear proxy authentication. Using the
url for the BMgr logout DOES clear proxy authentication.
Just because clntrust is running doesn't mean that the proxy isn't
still holding old proxy login information for your IP address.
The proxy uses proxy authentication to associate a browser's IP address
to an NDS user ID. In order to avoid authenticating a user for every
packet, the proxy must remember the association for some period of
time. In order to prevent associating the IP address to the same user
forever, there must be a mechanism to periodically clear the
association. So Novell engineered an idle timeout system. By default
(with clntrust - ssl login is configurable) the idle timeout is 3
minutes. After the idle time passed with the proxy seeing no
additional browse requests from the same IP address, it will clear the
authentication. Clntrust only ADDS the authentication, and dwntrust
does nothing about authentication - it just unloads clntrust.
There are 3 ways to clear proxy authentication:
1. Wait until the idle timeout expires
2. Use the clear authentication URL
3. Unload proxy.nlm
Just wanted to clarify there. I had a client of mine call me wondering
why her access rules weren't working. She changed a deny rule from Any
to just Students, and then she logged in as a student. She was still
allowed access. The reason was that the proxy was remembering her
previous login and still had her IP address associated to her
non-student user ID. So she had done everything right when changing
her access rule, but simply was not testing correctly. Had her very
confused for a bit.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

AUTOMATIC PO DURING GR

Hi,
I have done the customization for automatic PO during GR.
The system is creating a purchase order with the Info record price.
Now my question is: Since the cost of the item is totally fluctuating is it technically possible to enter the cost during GR ?
So that the system creates the PO with the cost entered during GR.
I think this is not possible with standard. But would like to have experts opinion.
Regards,
Shakthi.

Hi Shakthi,
Ideally GR is done with material master price....means with the internal valuation exclusive for a plant.
So I dont think the PO conditions will get generated with GR price....
BR,
Krishna

HT204380 My phone (iPhone 5S) getting green display after one second going to switch off then automatically ON during FaceTime

My iPhone (iPhone 5S) getting green display after one second going to switch off then automatically ON during FaceTime call. My OS version now 7.0.4. I think recent update actually to fix the above issue but still continues.

Similar issue Andrew. After installing 8.0, the IOS deleted 225 songs from one of my playlists, and I'm still "recalling" songs that are no longer in my Music Library. Fortunately, although the playlist of 235 had only 6 songs left on it ( on my Mac), the Playlist was not erased from my I -Phone. I was able to recreate the Playlist on my Mac, using the intact playlist on my phone. When I synched however, I was back to square one. I went to the Apple store, and I had to reset the phone . We also downloaded IOS 8.02. They saved my playlist in the Cloud, deleted it from my Mac, then synched it. Lo and behold, the playlist I recreated on my Mac, synched to my I Phone. After the reset, I had like 11GB of free space. (Its been 5 days since the "reset" and the number of GBs fluctuates from day to day !!)
When I got home from the Apple store I spent after hours reinstalling all the apps, synchng the phone to the Bluetooth in my car ( you know the rest of the saga) , I purchased a song from I Tunes. I "drag and dropped" it into a Playlist, and synched. Didn't work. Song shows in "Recently Added", but the drag and drop feature doesn't work. Bottom line, I'm not willing to "reset" my phone every time I add a song ! I've tried any number of fixes posted to this support community, but none have worked for me.
Furthermore, it took me 3 hours to get the phone re-synched to the Bluetooth system in my car. However every time I connect to "Bluetooth Audio", the system needs to "find" and "reconnect to" my phone. If you ( or anyone else ) finds something that might work for both the music synch and /or the Bluetooth, I'd appreciate your input.
Thanks, Lorenzo

PB17 sleeps due to automatic logout

Does anyone here know how to turn off automatic logout? My PB17 goes to Screen Saver after 15 min, but if I've been in class for an hour and come back to see if I have any messages, my computer is on a black screen and wont go back to the desktop. I have to force shut down-restart the whole thing. This is getting VERY old. Sometimes, depending on what programs are running, the automatic logout is cancelled due to a certain program. Is there a way to fight this so I can have my computer running more than it is now?
Aaron

You can disable automatic logout from the Security pane of System Preferences.
(9070)

Repetitive "Exception during idle processing" log message from servermgrd

Hello,
I'm at my wit's end trying to find the answer to this issue, and I don't have any clue where to begin. In /var/log/system.log, I'm receiving the following message approximately once per minute:
Apr 17 13:51:21 www servermgrd\[83317\]: Exception during idle processing: * -\[NSCFDictionary setObject:forKey:\]: attempt to insert nil value (key: FilePath)
There are usually no other messages in the log near these errors; when other messages are nearby, they are self-explanatory and appear unrelated. The message never changes except for the time stamp and the process ID for servermgrd.
Any suggestions on where to begin would be extremely valuable. Thanks!

check with this:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14</a>

Automatic logout in SAP System after Pressing Confirm button

Dear all,
We have Stock confirmation Transaction(ZTransaction) coming from SAP System through ITS. Our Issue is When user click on Confirm button in that transaction, background process will run. It is more like running Replenishment in ICH. Then user will be able to see the order pager after 45 min,after pressing Stock confirmation button. but the user is still alive in backend system, this will causing load on the backend system. So want to set automatic logout from that system after pressing confirm button in that transaction.
Can anyone help me or guide the logic to implement in ABAP Program.
Note: User will access this Transaction through Portal.
Rgds
PRadeep

Dear all,
There are two function modules are available...they are as follows.
TH_DELETE_MODE(Session will delete)
TH_DELETE_USER( Total login will delete)
Rgds
PRadeep

Automatic logout

I am looking for code which will automatically logout user whenever he refresh page or click on back button.
I am using JSp and Servlets

elOpalo
i checked your answer, but probably its not the answer i am looking for.
you used onLoad() which called at time loading the page
similarly, onUnload() called whenever page unloads or redirect to next page.
In your solution, even though user didn't press back/forword/refresh buttons of browser, and follows normal flow of execution, then also he will get error.
because even though its normal flow of execution whenever next servlet/jsp is called existing one went in state of unload.
and if i wrote code for logout on event of unload then its all making no sense.
i need to implement to make my application secure.
like most of us seem in banking application, whenever user hits back/forword/refresh button, or terminate program abnormaly; he automatically get logout.
please guys help me in this.
I am 2 steps away from my deployment, and still dont have any clue for this problem.
thanks in advance,
--subodh ahire

DT message on login and automatic logout

Hi,
a user booted the Solaris 9 (SunBlade 150) and proceeded a normal login.
The DT Message came saying to check /etc/hosts and other files, and
did automatic logout. The /var/adm/messages entry is this:
Jul 18 15:59:26 `hostname` dtsession[688]: [ID 684647 user.error] libtt[688]: libtt: startup_ttsession("ttsession -s -d :0") failed with code -1, see syslog
No Syslog entry. The ~/.dt/startlog looks like:
--- starting desktop on /dev/pts/2
/usr/dt/bin/ttsession[444]: ttsession: Tooltalk magic cookie authentication failed due to TT_AUTHFILE_ACCESS.
See system log file (/var/adm/messages) for details.
/usr/dt/bin/ttsession[444]: child ttsession exited with status 1
/usr/dt/bin/Xsession[757]: 425 Hangup
X connection to :0.0 broken (explicit kill or server shutdown).
X connection to :0.0 broken (explicit kill or server shutdown).
It is happening only to this user. Does anyone have any idea how
to correct that?
Thanks a lot for any help ...

In the user's directory, remove .TTauthority and .Xauthority. Check that .dtprofile is degault (may want to copy it from another user). I don't remember if you have to remove .ICEauthority as well. Then have the user log back in.

T61 CPU/GPU 90°C during load, 70°C during idle, normal?

Hi!
I have a Thinkpad T61 with the following specs:
Intel Core 2 Duo T7300 @ 2.0 Ghz
2 GB RAM (2 x 1GB) DDR2 667Mhz
nVidia Quadro NVS 140M 128 MB
120 GB 5400 RPM HDD, Windows XP Pro.
It's about 6 months old, and recently I installed a temperature monitoring program on it and noticed quite high temps on both CPU and GPU. About 90 degrees Celsius during load and about 70 degrees during idle. I've opened up the computer (palmrest + keyboard only) and use compressed air to try to blow out dust from the cooling assembly. But there was hardly any dust at all. And the temps are still the same.
Is this normal? Anybody else have these kind of temps?
Thanks in advance
Message Edited by Kervin on 08-24-2008 05:26 PM
Solved!
Go to Solution.

I got my thinkpad back today. They changed the fan for me. Now, the results.
The CPU now idles around 50 and during load about 60°C, I'm happy.
But the GPU is still the same, about 70°C idling, reaching around 80°C during load.
Is this still normal? Although I just mentioned the CPU overheating to Lenovo Support, I thought the cooling system covered both...
I might just buy a cooling pad.
Message Edited by Kervin on 09-09-2008 04:54 PM

Automatic logout of Forte clients

We would like to be able to detect if a user has not done anything for a
period of time - so that we can do automatic logouts after x minutes of
inactivity. Detecting inactivity sounds like the sort of job an agent
would do. Has anyone tried anything like this, or got any suggestions as
to how else we might do it - on a Forte client?
Thanks,
Graham Jenkins

Hi,
I would use BAT for that:
1. Create the services and the service profile, enable one user for IM&Presence using the service profile
2. Export all users using BAT in CUCM (Bulk Administration->users->Export Users, run immediately, then change to Bulk Administration->Job Scheduler, when your job is completed you can download the export file using Bulk Administration->Upload/Download Files)
3. Change the file extension from txt to csv and edit the file with your favorite CSV editor, so you enable all users for IM&Presence and add the service profile
4. Upload the file again with the last step in 2.
5. Use Bulk Administration->Users->update Users->custom file to update the user information.
Best regards,
Thomas.

HT5242 Are the older versions of Java automatically uninstalled during an update?

Are older versions of Java automatically uninstalled during an update?

If you open the /Applications/Utilities/Java Preferences.app then the available Java Virtual Machines will be listed. I have a newer mac with 10.6.8 that has latest Java 6 version installed on it and an older macbook pro with the lastest Java 6 Virtual Machine version and the previous Java 6 Virtual Machine version .

Automatically logout during idle

Similar Messages

Maybe you are looking for