Automatically move the needle to the start of the clip

I have several miniDVD's imported in separate events. Since the capture date is not being imported correctly, I am thinking of manually updating all the clip dates and times.
Is there a way to make each clip's "needle" to go to the start of the clip rather than be at some random point of the clip?
The reason I ask, is because I have DVD Player app open with the various "chapters" showing the date and time, and I would like to mechanically just go to each clip and adjust the date/time accordingly. Having the needle for each clip be at different points of the clips makes it hard because I cannot compare the image on the DVD chapter to the image I see in iMovie.
Any idea?

bump?

Similar Messages

I am trying to start a movie and it will not start. The message is "an error occurred in loading this content". Has anyone had this problem before?

I am trying to start a movie and it will not start. The message is, "an error occurred loading this content". Has anyone had this message before? Any solution?

Hi there TonyCashio,
You may find the troubleshooting steps in the article below helpful.
Apple TV (2nd and 3rd generation): Troubleshooting playback performance
http://support.apple.com/kb/TS3623
-Griff W.

How would I replace just the (imported) movie portion without having to start over the entire iDVD project from scratch?

I've just added a new ending and want to burn the new version of my iDVD project. How would I replace just the (imported FCE) movie portion without having to start over the entire iDVD project from scratch?

In an attempt to help clarify:
The FCE 3.5 project I first wrote about had 10 chapters and was a mix of stills and transcoded DSLR video clips that measured 58 min in length. After FCE converted it to a Quicktime movie, it exported from FCE to iDVD 7 flawlessly until I was asked to make a last minute change.
My older software wasn't endowed with the ability to "detect modifications". However, Deleting Assets was successful and a revised version of the original video could substituted saving me from starting iDVD over from scratch (thanks to Old Toad). Luckily, the ugly iDVD BUG did not awaken during these procedures. Thanks Bengt W.
I hope this helps the discussion.

UWL: The request cannot be started from the Business Workplace?

Hi All
Please assist I am currently trying to execute the standard leave request approval within the UWL.
This is the standard leave approval screen for workflow template WS12300111.
I get the below error in a SAP ECC easy web screen.
The request cannot be started from the Business Workplace
Message no. HRTIM_ABS_REQ066
Can anyone give me any insight to this as I have made multiple changes tothe UWL config.
Regards
Maahir

BY seeing the error message I think you might have not registered the task in the Portal, as you are have mentioned easy web screen
1. When ever you are trying to execute the workitem from the UWL and you are able to See the SBWP SAP inbox in the browser then it means that the task of the workflow is not registered in the portal.
2. Please ask your portal team to register the task in UWL with corresponding visualization parameters.
[check for the parameters that are to be configured|http://help.sap.com/saphelp_nw04/helpdata/en/20/f0c82c9f6748c58d9ea14b3bbed93a/frameset.htm]
You cannot execute a leave workitem from the Inbox. if you try to execute then it prompts the error message that you have mentioned.
Try to do check all the below points.
1. Check whether the task TS12300097 is registered in the SWFVISU txn it should be using a Java Application. with the parameters
APPLICATION     LeaveRequestApprover
DYNPARAM     wi_id=${item.externalId}
PACKAGE     sap.com/ess~lea
2. Second thing is make the task as General Task from the PFTC txn. so that the agent can approve
3. Ask the portal guys to register this task in the XML file where all the application specific task's are registred. and then try to execute the workitem, this time it will show you the leave request application.

I am suddenly having a problem printing 4x6 photos. The print as though starting in the middle of an 8x10 sheet. I've checked and double-checked the print settings. Anyone else have this problem?

I am suddenly having a problem printing 4x6 photos. The print as though starting in the middle of an 8x10 sheet. I've checked and double-checked the print settings. Anyone else have this problem?

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1"

I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1" How do I do this?

Hi H4S,
Click at the end of the Tile page.
Menu > Insert > Section Break.
Click in the second Section. Insert a page number in the Header or Footer.
Inspector > Layout > Section:
Regards,
Ian.

I listen to a lot of live performances (house sets that are from 1 hour to 3 hours long) when I start to listen to a set and then stop to do something else on the iPhone when I go back to start to listen to the track it has started from the beginning.

I listen to a lot of live performances (house sets that are from 1 hour to 3 hours long) when I start to listen to a set and then stop to do something else on the iPhone when I go back to start to listen to the track it has started from the beginning.

It sounds like either your hard drive or the SATA cable that connects it to the motherboard are failing. This could be heat related in your case, which is why you see it after it runs awhile. You can take it to the Genius Bar for a free evaluation. If you decide to test it yourself, I usually suggest moving the hard drive to an external enclosure. If it works there for awhile, the cable is probably the issue.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1397647657&sr=8-3&keywords=2.5+enclosure
http://www.ifixit.com/Device/MacBook_Pro_13%22_Unibody_Mid_2009

I cannot get the photoshop download to start from the order page - any ideas?

i cannot get the photoshop download to start from the order page - any ideas?

Brookie_g75093 I would recommend trying the steps listed in I can't download a purchased product from the Adobe.com Store.

Took apart Macbook pro 13 to remove broken headphone tip in the jack. Had to remove battery to get to the headphone jack. Now the laptop won't start. The power button is just not responding. Battery indicator showed charge of 3 dots initially but now only

Took apart Macbook pro 13 to remove broken headphone tip in the jack. Had to remove battery to get to the headphone jack. Now the laptop won't start. The power button is just not responding. Battery indicator showed charge of 3 dots initially but now only the last dot is blinking. The power cable used to light up green initially but now the green light is gone. I have tried SMC reset, which didn't work. What are my options?

Macbook Pro2067 wrote:
<snip>
What are my options?
Take it to an authorized service center.

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?

I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?
Also, can I use music as backround to some of the slides, not to all of them as I'd like to play videos on the others?

I have reinstalled the drivers. I watched it install the realtec and cirrus drivers. Hovering the mouse over the speaker icon says 'speakers: HP'. They are actually 'Creative'. 'Properties' indicates 'IDT High Definition CODEC' and 'This device is working correctly'.
Driver details gives 'c:\Windows\system32\drivers\dmk.sys'.
There is still no sound, although the little level meter on the control shows a green bar rising and falling.
Obviously, it thinks it's working, but there's no connection to the speakers. They're not muted, either. I checked that too.
Any other ideas?
Thanks.

HT1883 I am trying to run a hardware test. The Computer will not start with the "D" key held?

I am trying to run a hardware test. The Computer will not start with the "D" key held?

If you are using a Blutooth keyboard, don't hold the "D" key until the keyboard is recognised (green light)
Running AHT in Lion
http://support.apple.com/kb/PH4510

I'm just trying to update from 3.5.8 to the latest version. Started on the website and it downloaded a desktop image only, no application. Then tried on Firefox to update under "Help". It's been spinning for an hour! Help. I just want the latest version

I'm just trying to update from 3.5.8 to the latest version. Started on the website and it downloaded a desktop image only, no application. Then tried on Firefox to update under "Help". It's been spinning for an hour! Help. I just want the latest version

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

All my music and podcasts synced through iTunes are scrambled up. The songs and podcasts start in the middle and skip around. It happends on 3 diffrent Windows computers with 2 diffrent iPhone 4's.

All my music and podcasts synced through iTunes are scrambled up. The songs and podcasts start in the middle and skip around. It happends on 3 diffrent Windows computers with 2 diffrent iPhone 4's.

Anyone have any ideas or did my wife and myself just get defective phones?
Like I said all songs and podcasts start like 30 sec in them jump back to the intro then to the end then the middle. Its quite crazy.

How do I stop Safari from automatically loading a URL when I start typing the first few letters in the URL/search bar?

My question concerns a bug (or feature, I'm not sure which) that I've been seeing for some time on my Safari installations.
I'm running Lion (the latest patched version) with Safari (ditto). I've noticed that every so often, if I open a new tab and start typing something in the search/URL bar, Safari will not only suggest something based on my history, but will actually begin loading the page as though I had accepted that suggestion.
For example, today, I typed the letter "b" in the search/URL bar, paused for a few seconds while I was thinking of what to type next, and Safari went ahead and loaded "bugzilla.gnome.org" based on that being the last URL starting with "b" that I happened to have gone to. And the same thing has happened to me on earlier occasions with different web sites. In other words, it's not merely giving me a suggestion, it then proceeds as though I had accepted that suggestion. Sometimes it might happen to be right, but it's the principle of the thing.
Needless to say, I hadn't inadvertently bumped the Enter key.
Of course, ordinarily, Safari will just offer a list of suggestions based on my bookmarks and browsing history, maybe filling out the URL bar with the topmost suggestion (while giving me the option of overtyping it if I wish). And, of course, this happens without fail if I've just had Safari preempt me by loading a page and am trying to find out why. Like the best Heisenbugs, this "feature" goes away as soon as I make a concerted attempt to study it.
I have completely disabled AutoFill in the Preferences dialog. I would clear the cache and history, except that I kind of resent having to do that every time (or turn on private browsing, possibly another option) just to stop the computer from executing an instruction that I haven't even finished giving it yet (and in many cases intend to change).
Has anyone else seen or been able to disable this feature?

Why can't the Pan & Zoom Tool start with the whole frame using photos

I've used the pan and zoom animation in Microsoft Movie Maker - and want that same ease of use in any other program (I find it doesn't do a great job of soundtrack and text/image placement) see menu options below.... I Purchased Premiere Elements after watching a short video of the pan & zoom tool - however now that I am trying to use it it falls way short.
Is there a way to allow me to select the whole photo as the starting frame -- in the screenshot below the frame 1 will not extend to the whole photo so I start off with a cropped image. I want the full Frame of the photo and then be able to zoom and pan in toward faces - while I can still do this with the cropped frame I loose a good deal of my photo and the context it provides.
The Microsoft Movie Maker options - very easy | Limitation of Premiere Elements 13 to start with the full photo frame

Hi,
You might like to ask that question in the Premiere Elements forum
Premiere Elements
It looks to me as though the aspect ration of the photo and the video frame are different and therefore something has to be cropped off.
But I could be wrong
Brian

ITunes's not ignoring the word "the" when sorting artists starting with THE

Ive just bought my new mac, updated to the new iTunes version and transfered all of my songs to the iTunes library, but a problem appeared: iTunes is no longer ignoring the word "the" that comes before every band starting with the.
What can i do to put it back the way it was before?

That shouln't be happening. If should start an automatic restore process. You aren't holding down any keys when you click the restore button are you? You shouldn't be.
B-rock

Automatically move the needle to the start of the clip

Similar Messages

Maybe you are looking for