Automatically reconnect to Mobile Network when coming out of Low Power mode

My Pearl 8130 automatically disables the Mobile Network when it goes into Low Power mode. Unfortunately, it does not automatically re-enable the network when it comes out of Low Power mode. It also doesn't allow me to re-enable the network immediately after I've plugged it in, only after I've plugged it in and the battery has recharged for some period of time.
This means that I frequently absent-mindedly leave my phone disconnected from the network for hours at a time, even after the battery has recharged and the phone is capable of reconnecting. This is really inconvenient and, in my opinion, a huge design flaw.
Is there some way to configure my phone so that it will automatically re-enable the network as soon as (or soon after) battery power has reached the necessary level?

Actually, newer models do behave differently and have a different threshhold for cutting off the radio.
But remember this, the 8100 is getting to be an old device... and batteries have been upgraded since it was first released, as well as technology and specs on the newer devices.
The goal of the BlackBerry in cutting off the radio is to allow reamining use of your device, and to not allow the entire battery 100% to be sucked dry. Leaving the device signal and data running at less than 15% will very quickly deplete.
So, with that said, I would still recommend topping off the battery from time to time, in your case at night, or first thing in the morning.
And look at this application, ForceRadioOn
http://www.blackberrynews.com/2009/06/09/free-forceradioon-app-for-when-your-battery-gets-low/
But remember, using that app will drain your battery pretty quickly, but allow you to make that one last emergency call.
I guess you just can't have it both ways, long-life battery AND leaving the radio on below 15%
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

IPhone reboots when coming out of low power mode

I have a consistent reboot coming out of sleep mode.
If I have wifi enabled and put the phone to sleep for a longer period of ( time > 10 min ) the phone will reboot when I wake it. This is with only waking it up and not going to any particular application.
If wifi is disabled the the phone doesn't reboot on wake.
If the sleep period is short the phone doesn't reboot

I had a similar issue. I would reboot when I tried just to wake it up. It would also power back up (with logo) if I received a text message or email, vibrate or ding, then when it went back to sleep it would power down after a few minutes. My wifi was always turned off at the time.
I took it to the Genius Bar on Saturday and they replaced it, but my service guy said he'd never seen that before.
What really irritates me is my replacement iPhone has the negative black issue on pics and video, so now I want to take THIS one back as well.
Message was edited by: Nanotyrnns (to remove a dirty word... teeheeheee)

Q10 won't automatically switch to mobile network when wifi becomes unavailable

Is there something in the settings I am missing to have continuous connectivity? It is quite frustrating to realize there is no mobile network connection being recognized when there is always one availabe. The cell must be powered off and on to re-establish mobile network connection. Please help

Hey Staats,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
What version of BlackBerry 10 software are you currently running? Go to Settings>About to find this information.
Also has this issue happened ever since you had the BlackBerry Q10?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Airport doesn't locate my network after coming out of sleep mode

Hi, seems that my imac has a hard time connecting with my network when coming out of sleep mode. Even when I choose the proper network, it still asks for my password (even thought it's populated in teh password field) and when I choose OK, it still times out quite often. Eventually if I turn it off and on or restart comp, it comes up OK.
I'm a little afraid to repair permissions as I have a HP C7280 all in one that the general school of thought is don't repair permissions as Leopard thinks they need repair, but in fact are OK and when "repaired" stop the machine from working properly. It took me a while to get it going in the first place, I dont want to break it again! Any ideas?? Thanks, Dan

Apple Store currently thinks it's a hardware problem

IMac hangs on spinning color wheel when coming out of screen saver

Since updating to the latest version 10.5.5 my iMac hangs when coming out of screen saver mode with the spinning color wheel and I have to do a hard reboot.
I did some searching and it looks like this was also a problem back with and earlier version of 10.5
I use the pictures screen saver.
Anyone else have this problem since the last update??

Medievalknight wrote:
I was so spoiled from not having to do anything with my iMac but enjoy it that it never occurred to me a little maintenance would be required.
Still compared to the Windows PC's I have around that I have to try and maintain once a day I think the Mac is a killer machine....
You should attend to your iMac. Even the best machines need periodic attention.
Like an iceberg, most of Leopard is "under the ocean" or as we say, "under the hood." There is an extremely powerful BSD OS down there and it is really that, not Leopard per se, that need an occasional "tweak."
Actually there are automatic routines that do much of the hidden maintenance but permissions repair is not one of them.
Again, you do not need to run permissions repair every day. Not even every month, but it's best to do it anytime you install new software - before and after installing the software.
Some, but not all of the issues you see here are the result of not maintaining the computer.

Is Firefox Mobile sandboxed on Android OS also when is FF Mobile version 11 coming out.

I know the stock Android browser is sanboxed but what about Firefox Mobile and one other question when is Firefox Mobile version 11 coming out?
FYI what I mean by sanboxing is it being virtualized in a bubble of that encapsulates the browser so that only data from the browser is allowed to save outside the sanndbox or something that you want to save outside the bubble lets say an image that you save/download is this type of sandbox that Firefox Mobile uses?

Hi,
Firefox Beta (available in Google Play) includes support for Flash, so you might give it a try, the Sync setup is improved and makes it easy to get all of your bookmarks. As far a sync data, none of that is available to any other part of your device, see the data encryption section of this article for more info: [[How does Firefox mobile for Android provide secure mobile browsing]]
Thanks!
Michelle

7.3.2.6 crashes when coming out of standby mode

Has anyone else seen this problem with iTunes 7.3.2.6?
It crashes when coming out of standby mode. There is an error report I can send to Microsoft, but since it's an Apple program, I never send it.
Using standby was OK with iTunes 7.2.

Okay. Let's try getting a fresh one through to Roy.
If the log has been "live" for a while, info about every crash of any description will have been being added to it (with my Morrowind crashing on a daily basis, i once found a DrWatson log on belladonna that was over a GB in size). So it'll be easier for him to work through a log with just one crash on it.
Will run through my standard instructions just so i don't forget anything. (Sorry, I know you're up to speed on this sort of thing, no offense meant.)
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and send it as an attachment to this email address: [email protected]
In the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

Recently having problem with flickering on monitor (viewsonic vg2436wm). When coming out of sleep mode. The screen goes gray, sometime out. Have to press power button to get screen on. Problem stops.

Recently having problem with flickering on monitor (viewsonic vg2436wm). When coming out of sleep mode. It will flicker, the screen goes gray, sometime out. Have to press power button to get screen on. Problem stops. Getting more frequent. After sometime problem stops. My system is a Mac Mini 2010, 2.4 intel core 2 duo, 2 GB, running OSX10.8.5

See if it's related to this...
The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

Why does my MAC sometimes crash when coming out of sleep mode?

My mac freezea sometimes when coming out of sleep mode, and occasionally the screen will go black. At other times I will be using the MAC and it will just freeze. The only way to get out of it is to kill power and reboot. It seems to be happening more frequently.
It was suggested that I fix permissions and start in sleep mode. This has helped in the past, and I am going to do it again now. I also recently upgraded to 10.6.8, and after that the crashes were fewer, but now they are increasing again.
I am including a log of the recent crash a few minutes ago.
12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:04 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:04 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:15 AM com.apple.launchd.peruser.501[94] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
12/23/11 11:41:23 AM com.apple.launchd.peruser.501[94] (com.apple.Kerberos.renew.plist[116]) Exited with exit code: 1
12/23/11 11:41:34 AM com.apple.WindowServer[71] Fri Dec 23 11:41:34 Macintosh.local WindowServer[71] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory

Okay thanks, but I am a newbie who is not a very tech kind of a person. The only periphals I have are a kodak camera dock, a Canon 310 copier/fax/scanner and a pair of altec speakers. How do I determine if they all have drivers for my MAC? They all seem to work okay, if that is a sign, though the Kodak camera Dock is a bit slow. How also do I determine if they are Apple energy compatible? With each of these peripherals, do I simply disconnect them from my MAC one at a time to see if there improvement?

Why does my Mac Pro open to a fuzzy screen when coming out of sleep mode?

Why does my Mac Pro open to a static-filled screen when coming out of sleep mode?

But does it then come fully awake? My MB Pro comes on with out of focus screen as if in a fog but once it comes awake it clears up, there is a progress bar at the bottom showing the progress from sleep

E9220y hangs when coming out of sleep mode

My new HP Elite e9220y hangs when coming out of sleep mode- When I 'touch a key' or move mouse, power switch on computer turns from yellow to blue, but monitor remains black. Have to force off, and restart. Adjusted power management to 'never' sleep but I was hoping for a more elegant solution.

Quote
Originally posted by southmike
but i would try the settings i used in my psu/sleep thread.
https://forum-en.msi.com/index.php?threadid=43603&sid=
it fixed my hang problems and even got my lights to sleep properly
Southmike, I'm glad I could help you out. When I tried using the settings you stated, it didn't help me resume from standby. However, I did finally get standby to work by first resetting the BIOS to default, and then setting the Power Management to:
ACPI Standby: S3
Call VGA BIOS (no idea what this is): Enable
USB Wakeup: Enable
Power Management/APM: Disable
And, I also disabled a few other things I dont use like onboard Audio and RAID and voila, now WinXP can go into standby and resume from it piece of cake.

Network Issues When Coming Out of Sleep

I purchased a 13-inch Macbook Pro about a month ago. I'm running OSX 10.6.4.
Last night I started experiencing issues. Whenever I close my laptop, it goes to sleep fine. However, when I open it to begin using it again, it's unable to find my wireless network. It searches for a while, and then tells me my Airport is off. When I go to turn it on, the button will either not do anything, or the laptop will lock up and I'll need to hold down power to get it off, back on, then working again.
Usually after a restart everything is fine again, however I have experienced a few random lock ups since this all began.
Thanks for your time! Any help would be awesome.

Welcome to Apple Discussions
Not sure if this is what's causing the issue but checking/adjusting this won't hurt.
Open System Preferences/Network and select your normal/home location
In the left hand column make sure Airport is at the top of the list and delete the other items listed that aren't used (you can drag items around to change order and use - to remove)
Then click the Advanced button and in the window that pops open click the Airport Tab
In Preferred Networks delete everything but your home network name
Click "Remember networks this computer has joined"
Uncheck "Disconnect when logging out"
Click OK to close that window
Click Apply bottom left then close the panel
Fingers crossed it should now see and join your home network on waking, sometimes it can take 30 seconds or so for me ...

System does not automatically reconnect to wifi network after sleep/restart

My iMac G4 (2GB RAM, 10.5.1, AirPort Extreme) does not automatically reconnect to my wife network after waking from sleep or restart. I just recently switched the iMac from a wired to wireless set-up though the machine has always had the AirPort card. In wired mode, it always automatically found the network.
Network preferences have the "Ask to join new networks" checkbox selected. Below the checkbox it reads "Known networks will be joined automatically."
My wireless router is Linksys WRT150N, security type is PSK and encryption method is AES key.
Anyone have any suggestions?
Thanks!
bk

I'm having the same problem, the only way i can connect to my wireless network is to restart the computer, and open safari immediately. Then once it goes to sleep or i shut the notebook, i have to restart it again to use the internet. It's driving me nuts, and nobody knows how to fix it. I've tried firefox (it didn't help) and my sisters macbook connects just fine to my network, so it has to be a network setting. I'm going to schedule an appointment with a mac store tomorrow. so I'll post again when they fix it for me. hopefully i will understand how they solve the problem so i can post it to you guys

Automatic reconnect to wifi network

there is a way to automatically reconnect to a wifi network after the router has been switched on-off?
that's because at home we have a wifi network and router automatically switches off for 1hr during the night, i leave my laptop online but when i wake up in the morning it's always offline cause when the router turns on again my mac won't connect automatically to the network and i have to do it manually!
what can i do??
thanks

I'm having the same problem, the only way i can connect to my wireless network is to restart the computer, and open safari immediately. Then once it goes to sleep or i shut the notebook, i have to restart it again to use the internet. It's driving me nuts, and nobody knows how to fix it. I've tried firefox (it didn't help) and my sisters macbook connects just fine to my network, so it has to be a network setting. I'm going to schedule an appointment with a mac store tomorrow. so I'll post again when they fix it for me. hopefully i will understand how they solve the problem so i can post it to you guys

Small delay when coming out of standby

I have noticed that when my iphone 4 goes into standby +on its own+, and I press the home button, there is a short delay of approximately 2 seconds for it to get out of standby. However, when I put it on standby (by pressing the power button), and then press the home button, it gets out of standby almost instantly.
Is this normal? Does the iphone just need time to "warm up" when coming from sleep mode, and that's what is causing the small delay?
By the way, my iphone is completely stock - not even one app. on it, and only a few minor settings changed.

I have the exact same issue. Exact same setup -- no additional apps.. nothing running in the background. My wife also got her iphone 4 at the same time and also has this "issue".. if in fact it is an issue at all...
Having searched online, it sounds like it is fairly common and more than likely something that can/will be resolved with a future software update...
That being said, I'll still feel better the more I hear of others experiencing the same thing...

Automatically reconnect to Mobile Network when coming out of Low Power mode

Similar Messages

Maybe you are looking for