Automatically start Document Distribution

Hello all,
i have a requirement to start the SAP standard document distribution automatically for a specific document if the status of this document is set to a release status.
I stll have implemented the Note 824949 and therefore have activated the event type linkage for the following BUS objects:
BUS1082 INITIATED
BUS1082 RESEND
DRAW     CHANGED   DOKST
DRAW     CHANGED   DWNAM
DRAW     CHANGED   DISTRIBUTION
The manual distribution for documents is still working fine but (the distribution log and the SBWP say it)
But I don't get any log entry and not SBWP mails if a document of a distribution list is set to a release status!!!!!!!! So the automatic process is not working until now.
Do you have some more hints?
Thanks,
Christian

I would use a workflow, at the point when a document is released you create an event. Based on this you can send the information. This is potentially not the easiest way but allows you to do function as you need it.
Regards
Thomas

Similar Messages

Error in SAP standard workflow ddoStart - Start document distribution

Hi all,
I'm trying to use the document distribution but i'm failing completely. After doing what i think is the necessary config (setting all relevant tasks to general task should be all), i try to distribute. I create a list, selects people and click go.
When checking the log for the distribution later on, all workflows generated hang in the same place - namely the case branch before "check document distribution". Further on, the "check distribution order" task does have three potential outcomes after calling the business objects corresponding method. The problem is that the method "check" of bus1082 (doc. dist. order) does not return a check value as a parameter, even though it has a result internally.
I suspec i'm missing something here, but the wf still bombs out.
Tips and tricks guys?
Espen

HI all,
Problem is identified and a solution is found. THe businesss object's methods for distribution order did not have the flag for result parameter ticked. Opening up the standard SAP objects, tick the box and voila - it works.
Still puzzles me how SAP did release this. Didnt they test?
Espen

DMS-Document Distribution Setup

Hello ,
I would appreciate if any one can give me some idea's on config part of Document Distribution in Document management system.
I maintained recipeint list and in CVI8 i started document distribution which gave me back an internal order number later i went to CVI9 to execute the initial order number which took me to Distribution log screen .
There i get message like Not assigned to distr. order package,i selected the Box highlighted pertiaing to that document and i executed for document distribution i received a message like Only partial orders with status AS, MA, ER, WO, or WR are allowed.
Guys sorry i may be wrong with the approach on the above step i carried out but can u breif me up what i should have to config and acheive my document distribution succesfull.
Regards,
Murali.S
Points will be awarded for sure.

Hi Murali,
please implement the attached note 1008281 which should solve this
behaviour.
Further please go to the swdd transaction and enter the following worklow
templates (WS20000104 and WS20000137).Go to the edit mode and activate
them once again.
Best regards,
Christoph

How do I format a document in Pages 5.2 so that each sentence automatically starts with capital letter?

How do I format a document in Pages 5.2 so that each sentence automatically starts with capital letter?

If you installed the Devon Technologies (Freeware) WordService Service package, there is an item that will enable you to fix selected content to show initial capitals in sentences. You may need to enable this feature in the System Preferences > Keyboard > Shortcuts > Services selections. This only works in Pages v5.2 (and maybe later releases).

IDE: automatic start of workflow for switch document

Hello guys,
Please, can someone tell me how do you automatically start the distributor workflow (WS20500195) without using SWUD transaction?
I created the switch document ( switch view: distributor, switch type: end of supply), but the workflow won't start automatically, although is activated in SWE2 transaction.
Thanks,
Regards,
Eduard M.

Hello Anand,
The workflows (distributor, new supplier, former supplier) were activated in SWE2 transaction.
I also activated the triggering events from SWDD transaction for each workflow.
Object type: ISUSWITCHD
Event of the object: CREATED
The thing is that after creating the switch document, I thought the workflow will start automatically (i mean after having customized the workflows in SPRO + SWE2 + SWDD).
Anyway, thanks for your help.
Best regards,

TS1369 My computer (Win 7) recognises my ipod but when Itunes is automatically started the ipod is removed from "my Computer" and is not recognised in itunes, my device manager states he device is being "uninstalled by window" error 21, what is happpening

My computer (Win 7) recognises my ipod but when Itunes is automatically started the ipod is removed from "my Computer" and is not recognised in itunes, my device manager states he device is being "uninstalled by window" error 21, what is happpening.

Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Document Distribution in DMS

Hi Gurus,
Has any one implemented the Document Distribution in DMS?
Please share your experience and documents if any?
email id: [email protected]
Points would be awarded.
Thanks,
Paddy.

Hi paddy
I have done document distribution and it is working fine..
kindly check the following
Steps
1)Recipient Management
Show all entries for recipient management
User menu document management system Environment Document distribution Recipient Office User
Use the address info and communication type RML. Show all entries.
2) Customizing settings :
Under Document management → Document distribution→ Distribution type→ Define distribution types
Click on the distribution type which you want to activate and make it default.
3) Go to DIR, Environment ---> doc distribution ---> create recepient list and save the recipient list.
4) Start the distribution with your defined entries. T code CVI8
5) Look at the log entries. CVI9
6) Use the Workplace in the standard SAP menu. If you did everything in the right way, you will find an entry in your workplace ( t code SBWP).
7) Refer Note 824949-Document distribution: for Activating Event type linkage.
Thank you
Regards,
nitin
Award points if useful
Edited by: nitin bhagat on Mar 31, 2008 8:59 AM

Document Distribution Automation

SAP-DMS Expert
in Document Management System there is Document Distribution process
i know whole process of Document Distribution , but it is manual process
i want to Automated it , How can i ???
point rewarded

Hi Dave,
if you want to automate the distribution maybe SAP note 824949 might by usefull for you. Here the activation of the 'Event Type Linkage' is explained.
So please see this note and activate the event type linkage.
Best regards,
Christoph

Document Distribution with customized event.

Hi,
Is anyone familiar with the fenomenon "document distribution" in SAP? The following is the case:
When a document is changed and saved in SAP the event DRAW.CHANGED is triggered. In SWETYPV you can link this event to the receiver DISTRIBUTION. Here the document distribution is started and also with a function module is checked whether the status of the document is released. This works fine.
However at a customer, I need to define an event which is only triggered if the status chages from 02 to 03. Did this in SWEC and thew event is triggered at the right moment. I linked this event to the receiver DISTRIBUTION and also the receiver is started, but without any values. Result document isn't distributed.
I read something about the FM SWE_CD_TEMPLATE_CONTAINER_FB_2, but I don't know if this will help me. I also don't know in which direction I've to modify this FM. Could anybody suggest a solution if you ever encountered the same problem?
Kind regards,
Joost van Poppel

Hi Christoph
I have generated the profile and assigned to the correct user. In ST01, when I tested the autorization checks, all auth. objects checks are fine except C_DRAW_TCS.
For C_DRAW_TCS the auth. check is happening for only "03 Display" activity.It is not happening for the activity "59 Distribute". I have maintained the auth. object for both Display and Distribute. as follows
C_DRAW_TCS
ACTVT : Display, Distribute
DOKAR : DRW
DOKST : RL
But the auth. check is carried out for only display.
C_DRAW_TCS RC=0 DOKAR=DRW;DOKST=RL;ACTVT=03; and it displays Authorization check successful. For distribute the auth. check itself is not carried out.
Help me in sorting out the problem.
Regards
S.Sivakumar

Document Distribution order package status IW?

Hi
I am working on document distribution. the workflow is starting very well but fails to proceed at the status IW. On top of the order staus, there is a message "Not assigned to distr. order package". I am failing to troubleshoot it. Any ideas, transactions and assistance to resolve this will be highly appreciated.
Kind regards

Hi,
Can you make sure that checkbox for 'distribute immediately' indicator is ticked when you start distribution using Txn CVI8? If not, you will have to make appropriate settings in customizing.
Hope this resolves the issue.
Regards,
Pavana

Org Unit as Distribution Point for Document Distribution

Hello Experts,
I would like to maintain a distribution point for the document distribution. Therefore i still have maintained the distribution point (it is an org unit) in the available communication types (INT, RML,..) in SPRO...->Document Distribution->Define Communication Type.
But now every time when a distribution package will be started for distribution I get an error message: "Function <senden> not possible". The package should be send via distribution type INT to the distribution point.
Perhaps the communication type INT is not maintained for the org unit yet?Where can i do this?
Regards,
Christian

Hi Christian
The distribution point under Type of distribution point and Distribution point is used under the following conditions:
1. If distribution is initiated manually and the Distribution immediately indicator was set without entering an explicit distribution point.
2. If distribution is initiated manually and the
Distribution immediately indicator was not set.
3. If distribution is initiated by an event.
If the "Send to distribution point" indicator is set and no distribution point is entered explicitly, the current user becomes the distribution point if distribution is initiated manually. If distribution is initiated by an event, the user that triggered the event becomes the distribution point.
Follow this Procedure.Also Check all the setting in Define Distributio Types for Distribution type INT
where you mention distribution Point details.You will have to explore alittle bit.
With Regards
Mangesh Pande

Document Distribution in R/3 system

hi experts,
Is it possible to use functionality of Document Distribution in DMS without use of Content Server means only using R/3 database.
if yes, how to do it ..what are steps while configuration.
for useful answer points will be awarded. Be sure..
thx...

hi
i had done same things as mentioned below
For document distribution between SAP USERS in SAP DMS
1) I maintained communication type and address for RML.
2) Maintained distribution type activated it and makes it default
3) Also checked: Activating Event type linkage.
4) Maintained the value '2' as processing type for RML
5) Created recipient list and started distribution in Tr. Code CVI8
6) Initial Order is generated, got message document sent successfully.
what is missing, is it necessary a RFC connection & workflow for document distribution within SAP users in same client.
the problem is that in tr. code SBWP document is not received and in distribution log document is shown with yellow flag & "SY" status
thx..

Docked iPhone 3GS automatically starts or resumes playing/HOW TO STOP

Last year, I brought my iPhone 3GS to an Apple store and presented the problem of docking the iPhone and having the iPod on the iPhone resume or play from the beginning whatever song had last been played on the iPod. I needed to stop that behavior. One of the tech people showed me how to do that (something about hitting HOME button and power on/off button of phone simultaneously or one after the other or something). I've forgotten how to do this! There must be somebody on this forum who knows this secret formula.
It's highly annoying to dock the phone in my car and then have the iPod on the iPhone just automatically start playing whatever was last being played. I do not want it to automatically play anything when docked. Right now, the only way I can sort of do this is to switch to a podcast and force the podcast all the way to the end of the episode and then hit DONE. The way that tech showed me was much more efficient and elegant.
Anybody know how to do this?

The checkmark is used to include or exclude the checked item in the specified action. For example, only songs with a checkmark are imported when you click Import. Or only checked songs are considered by Genius, or synced to a device. However, checking songs does not exclude them from shuffling.
You might find this slightly outdated document useful: http://docs.info.apple.com/article.html?path=iTunesMac/8.0/en/symbols.html

How can I disable iPhoto from automatically starting when I connect my iPhone?

Whenever I connect my iPhone to my Mac it automatically starts iPhoto? How can I make this not happen?

Go into iPhoto's General preference pane and set the Connecting camera opens to No Application:
OT

How can i disable imessage from automatically starting up when i turn on macbook air?

how can i disable imessage from automatically starting up when i turn on macbook air? i dont know my imessages to pop up on my laptop when it turns on. But i dont want to disable imessage totally on my macbook.

Welcome to the Apple Support Communities
First of all, check that Messages is closed when you turn off your MacBook. This is so important because, by default, OS X will reopen all opened apps the next time you start your Mac.
Apart from that, when you go to  > Shut Down, or  > Restart, in the window you see to restart or turn off your MacBook, unmark "Reopen windows when logging back in". This will avoid that your Mac opens all opened apps the next time you start the MacBook, so Messages won't start automatically at startup

Automatically start Document Distribution

Similar Messages

Maybe you are looking for