Automatically start recording a meeting

Prompt and no other solution except autorecord pod to automatically start recording a meeting? via the AP can be done?

Well the great thing about Connect is if it doesn't do what you want/need, chances are it can be customized to meet that need. I would recommend you reach out to Refineddata about their auto record pod and the possibility of modifying it to auto record upon your conditions. You can reach them at [email protected]
Alternatively, should you want to do it yourself, you can use the Collaboration Builder SDK and build your own custom pod that does whatever you want. The SDK can be found here, Adobe Connect | Adobe Developer Connection.
No tool can meet the needs of everyone, but only Connect can be customized to best fit the needs outside of its factory functions.

Similar Messages

I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

QuickTime version 10 can only record the entire screen.
10.1, 10.2 and 10.3 offer part of the screen recording.

Just started using a brand new ICD-AX412. I have recorded a meeting and the playback is fine but I h

Just started using a brand new ICD-AX412. I have recorded a meeting and the playback is fine through the 412. 2 problems.
1. With the expansion M2 SanDisk, it takes the 412 about 10 minutes to "Access". Top line says "Accessing" for 10 mins. Then it becomes available to record.
2. 412 will not connect to a computer usb port. Just says "connecting" forever.

Hi pwmac2005! I'd like to verify further information. Does it happen on all USB ports? Does it also happen on another USB? Let me know. Thanks.

How to turn of "Automatic Start/Stop Detection for HDV Caputre

Hello,
I'm pulling my hair out trying to capture HDV 1080i-50 without getting separate clips created by the metadata at the start and stop of each shot. It's that feature called "Automatic Start/Stop Detection." I'm not talking about "Make new clip on timecode break."
How can I turn this Start/Stop thing off. I don't want all these **** clips everytime the cameraman hit the record button.
Anyone know how to turn it off so it stops making separate clips?
Thanks!
Kirk

Yeah, Andy. It helps to have the manual!! THANKS. It says... Select or deselect "+Create new clip on Start/Stop+ checkbox in the Clip Settings Tab of the Log and Capture window."
It's strange that I was looking for that kind of a box in all the various settings but not in the log/capture window.
Kirk out.

Can't stop applications automatically starting in user account

I created accounts for each kid.
Parental control is active, but no restrictions on which applications they can use; just website restrictions and time limits.
Allowed them to modify the dock.
Each time they log in various applications automatically start and removing them from the startup list does not seem to solve the problem, and one is not even on the list.
The "re-open windows" check box is NOT selected when they log out and I watched them quit the applications before logging out.
Example: for one account iTunes Helper always shows up on the startup list... I try to remove it in their account and it just pops back up... this appears to cause iTunes to autostart each time the log in... annoying.
Example: same account, the System Preferences always start up... fortunately it is locked so the kid can modify anything. But again, annoying.
I propagated read/write permissions through their account folders (thinking maybe some settings are not being recorded)... but no luck...
I may just try to re-create their accounts but was hoping to find the answer to this most perplexing issue.
Thanks,
mk

Aha! Even though they had permission to read/write their files, apparently the ownership was not theirs on all of the files, this must have restricted the mods to their account.
Thanks for the "jog".
Background:
This permission state stemmed from a full re-build/re-store I did about a year ago when the hard drive crashed (with encrypted files in the my account, no less)... The backups were out of date (long story) and it took about a week to recover and re-assemble the sparsebundle bands from the broken drive (I only lost 12 pictures!... Disk Warrior really helped with that one!)... anyway I managed to install a new drive and re-stored all of the accounts, but apparently some of the library states had me as the owner... If I think long enough I probably remember how that happened.
Again, thanks for "remembering" for me ;-)
mk

ITunes automatically starts & plays

iTunes automatically starts & plays every 5 minutes (without connecting any device). Is there a way to stop this without turning off iTunes Helper?

I agree with/have same problem as vinfromacton.
I know it's Flash causing the problem:iTunes had been functioning normally until this morning when I downloaded Flashto allow me to listen to archived radio programs on the internet.
Once I downloaded Flash, iTunes startedopening and playing automatically ~ every 2-3 minutes. Annoying as it playsover audio I am listening to &/or recording.
Only fix I've found is to turn iTunesvolume down to zero: does not stop iTunes from opening - it continues to do so- but I don't hear the iTunes audio.
I'm also going to try dr alexander'ssuggestion: Open a blank Playlist > leave iTunes focus there>quit iTunes.
It reopens but at least it'ssilenced....
Haven't tried it but I would imagine uninstallingFlash (need to download the uninstaller from the Adobe website) would solve theproblem. This however would lead me back to my original problem: no Flash >cannot listen to audio archived on the internet and other internet audio...
I'm also going to call Apple: I haveAppleCare. Will re-post after talking to them.

How can I disable iPhoto from automatically starting when I connect my iPhone?

Whenever I connect my iPhone to my Mac it automatically starts iPhoto? How can I make this not happen?

Go into iPhoto's General preference pane and set the Connecting camera opens to No Application:
OT

How can i disable imessage from automatically starting up when i turn on macbook air?

how can i disable imessage from automatically starting up when i turn on macbook air? i dont know my imessages to pop up on my laptop when it turns on. But i dont want to disable imessage totally on my macbook.

Welcome to the Apple Support Communities
First of all, check that Messages is closed when you turn off your MacBook. This is so important because, by default, OS X will reopen all opened apps the next time you start your Mac.
Apart from that, when you go to  > Shut Down, or  > Restart, in the window you see to restart or turn off your MacBook, unmark "Reopen windows when logging back in". This will avoid that your Mac opens all opened apps the next time you start the MacBook, so Messages won't start automatically at startup

SAP system doesn't automatically start after restart (but manual start ok)

Hi,
We've got a new production line of SAP EP 7.0 systems, which have CI on HP-UX and DIs on windows. The version is NW2004s SPS09.
What we see is that after a restart of the windows servers (usually because of windows patching), the SAP system doesn't automatically start up. It doesn't start up if I restart the SAP<SID>_<instance> service either.
However, I've got no problem starting the system with the MMC.
Any idea what I am missing here? is it as simple as a profile parameter ?
As far as I can see the profile used seem ok.
After a restart of the windows server the following files have log entries in the c:\usr\sap\<SID>\J<instance>\work folder
sapstartsrv.log
trc file: "sapstartsrv.log", trc level: 0, release: "700"
Fri Nov 17 15:51:26 2006
<<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
sapstart.log
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_97
Webservice thread started, listening on port 59713
sapstart.trc
Starting WebService thread
SapSSLInit failed => https support disabled
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_97
Webservice thread started, listening on port 59713
The windows event log have the application events
(first)SAP Service SAP<SID>_<instance> successfully started.
(at the same time)
Failed to update service environment from user (STATOIL-NET\<sid>adm) environment. [ntservmgr.cpp 201]
(note that this doesn't happen for all systems which have this problem, for other there is no entry like this)
I see no failed login attemps in the security event log, but see the that a login is performed for SAPService<SID>.
Since it also fails to automatically startup when I restart the service, I am able to use filemon to see what happens at a file level. Here I see that it can access the shared file system without any problems, and can read the profile and everything.
MOM is running on the server and gets some Access denied errors since it doesn't have access to the shared file system, but I don't think that matters.
Cheers
Dagfinn

hi we are using sap bw 3.5 . database is oracle 9i
i applied a kernel patch and when i tried to start the services . there was no problem with the oracle services and saposcol but the service sap<sid>_nr did not start .
when i went to check the error in work folder ..
it say " SapSSLinit failed => https support disabled .
then i tried to start sap from cmd pmt . din`t work .
is there a way to statrt this ...
thanks alot.
arjun

IPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds recorded. This happens randomly and often and sometimes has the delay but starts at zero. Solution Anyone?

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

After iOS 7 update, my iPhone 4s Voice Memo App has 5 second delay when the record button is pressed. When it starts recording, it goes from 0 seconds to 5 or so seconds that it shows has recorded. This happens randomly and often, sometimes it will have the 5+ second delay but starts recording at zero seconds. Besides the delay it has been working fine as far as saving and playback is concerned. I have plenty of storage on the phone itself and it NEVER had this problem before I updated to iOS 7. I've reset the phone a couple times by holding down the power and home buttons at the same time. The reason I have an issue with this is that I'm always recording song ideas, melodies, and scratch takes; what I'm saying is when I come up with an idea I need to be able to know that when I hit record it will start right then so I don't forget anything that has just popped in my mind.
Does anyone have a solution or suggestion?
Thanks

When I insert an audio CD into my iMac, it automatically starts playing

When I insert an audio CD into my iMac, it automatically starts playing, and I can't figure out why, nor how to stop this behavior. When I click in the upper right corner of my screen where it says "Finder", it shows the Finder as the only application running, and yet SOMETHING must be causing the CD to play. If it is an Extension that is being loaded, is it possible to terminate the Extensions one by one without restarting the computer to see which one is playing the CD?
Is the OS9.1 operating system supposed to automatically play audio CD's when they are inserted into the iMac? Or could it be an Extension that is doing it?And if so, why is no means provided to actually CONTROL the playing of the CD (such as a control panel with PLAY, STOP, SKIP, etc. buttons)?
On a PC, I can press Control/Alt/Delete to bring up the "Task List" that will show me ALL applications and processes currently running, and then terminate apps and processes one by one without having to restart the computer to see which one is playing the CD. Is there an equivalent way to display this information on an iMac that will show me which application or process or extension might be causing the audio CD to play, and allow me to terminate them one by one without restarting the computer until I can see which one is the "problem"?
Jerry

Hi, Jerry -
Welcome to Apple's Discussions.
Finder uses QuickTime in the background to do that, hence no specific app is shown in the Application menu (the far right item in the main menu bar) in addition to Finder.
To unset automatic playing of CDs (and DVDs) -
Open the QuickTime Settings control panel (Apple menu > Control Panels > QuickTime Settings).
In that control panel, select AutoPlay from the pulldown menu in the control panel. Uncheck both the items shown in the new window. Close the control panel.
No restart should be needed in order to make the change effective.
Doing this will also guard against the (now ancient) AutoPlay virus, which could still be lurking somewhere on the net.

Tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery

tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery for two ouers. After the internet recovery the same problem with reinstalling OSX message

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another

Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another cannot operate the ipad at all, tried switching off and back on again, also restored the ipad but of no use

try restart
http://support.apple.com/kb/HT1430

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

In Lion, running on an i MAC (late 2006), how can I stop certain programs from automatically starting up when I start my MAC?

In Lion, running on an I MAC, (late 2006), how can I stop certain programs (iTunes, Word) from automatically starting up when I start the computer?

Any application that is open when you shut down will re-open when you restart unless you deselect this when shutting down/restarting:
Also check System Preferences>Users & Groups>Login items tab and make sure there's nothing listed there that you don't want launched.

Automatically start recording a meeting

Similar Messages

Maybe you are looking for