Automatically start with numbers lock on

when i start up pc the numbers lock is always OFF, so, to enter my 4 digit pin i always need to push the numbers lock key, FIRST.
can't this numbers lock key be enabled (on boot) automatically, so all i need type is my 4 digit pin?
Can't seem to locate an option in the win7 control panel to set this up with auto caps lock ON.
Thanks,
tom

What happens when you try?

Similar Messages

When typing an email I need each new sentence to automaticaaly start with a capital letter. At present after a full stop the new sentence automatically starts with a lower case letternot an upper case one

When typing an email new sentences do not automatically start with a capital letter after a full stop.
Surely this should happen automatically without the need for me to touch the capital letter icon.
peter

peterlesliebabani wrote:
i called apple and the guy i spoke to said it is probably a VIRUS and it will be corrected on the next update!
Either you didn't actually call Apple, and got some tech support scammer instead (calling the first number that pops up on a Google search for "Apple support" can give you some bad numbers), or the Apple tech you spoke to didn't know what he's talking about. It's not a virus.
As for the problem, if you have enabled auto-capitalization and the problem continues, first try resetting your device. Press and hold both the home button and the sleep/wake button for about 10 seconds, until the screen turns off. Ignore the slider that will appear. Release the buttons, then press and hold the sleep/wake button until the Apple logo appears. This is the equivalent of a reboot, and should not affect your data or apps.
If that doesn't help, try restoring your device from backups, and if that doesn't help, restore it to factory settings (ie, do not restore a backup). See:
http://support.apple.com/kb/ht1414
If none of that helps, the issue is caused by some kind of hardware problem, and the device will need to be repaired or (more likely) replaced.

How do I format a document in Pages 5.2 so that each sentence automatically starts with capital letter?

How do I format a document in Pages 5.2 so that each sentence automatically starts with capital letter?

If you installed the Devon Technologies (Freeware) WordService Service package, there is an item that will enable you to fix selected content to show initial capitals in sentences. You may need to enable this feature in the System Preferences > Keyboard > Shortcuts > Services selections. This only works in Pages v5.2 (and maybe later releases).

How can i sort PDF's on IBook with the name that starting with numbers

i import a number of pdf's representing ameeting agenda as the files names (1xxx,1.1xxxx, 2.xxxx,10.xxxx) on ibook , however the files sorted on a diffrent way as file start with 10 on first . so how can i sor the files on the IBook with its name starting with numbers as1 &1.1 and so on.

You seem to want a numeric sort but are getting a character sort.
a number range would be 0,1,2,3, ... 9,10,11 ...
sorting like everything else with computers is an algorithm. Someone needs to define how it works. When you see a list of files, someone has defined how the list will be sorted. If you compare Windows file sorting to Mac files sorting you will find there are differences.
In the case of files sorting, the files are sorted on characters from left to right. In file sorting the sorting algorithm does not try to determine that files are numbers. All files beginning with a 1 will be sorted together becuase the file sorting althorithm doesn't look at the second character position before grouping all the 1's together.
For what it is worth, there are multple books written on sorting.
Robert

HelpPane.exe automatically starts with Windows 7 64bit.

HelpPane.exe automatically starts with Windows 7 64bit. I have to start task Manager and disable it or else it keeps popping up. I cant find where to disable this service from startup. Please Help.

Hello
I found a simple yet effective solution for this problem, my friend had the same issue so instinctively as a technician, I suspect this was a malware of somekind so I re-formatted and installed Win7 funny it's still there, so I did a Hard disk wipe using
Dalvik's and re-partitioned and formatted again, to my surprise it still have the same problem.
So I ask Mr. Goo' old Mr. Google for answer, but I've found more complications, sorry for the story, so without further a do, the solution.
Boot to safe mode. (may also work in "normal mode")
Go to Task Manager>
Click the Services Tab>
Right click "HelpPane.exe" or Help and support service>
Select Properties>
Click the Security tab>
Click the Advanced tab (for permissions options)
Then select the "permissions entries" one at a time>
Click Change Permissions>
Then click Edit>
CLEAR ALL THE CHECK BOX FOR ALL ENTRIES
This should prevent access to the HelpPane.exe to all users/programs.
This resolved my friends Windows 7 "Help and Support thingy" issue, hope it does yours too.
Message me for questions and/or clarifications/corrections.
Thank you

Automatic start with JWS/JNLP

Hi all,
Is it possible to use JWS/JNLP to automatically start my application when the computer start or when the Windows session is opened, and how ?
Thanks,
Xavier

You should be able to approach this just as you would with an applet. Just write an applet that interacts with your servlet and then you can write a JNLP file for the applet using the <applet-desc> tag.

How may i forbidden that movies automatically start with sound when the mouse run on images

Every thing is in the title

It's rather unintuitive, but start a video playing and click the "shrink" icon in the on-screen control bar (right end, the two facing arrows) to reduce the playback from full screen down to a window. Then go to the View menu, select "video playback", and set it to "in iTunes Window" or "in separate window" as you prefer.
Regards.

MacBook starts with caps lock and num lock ON

From time to time after upgrading to Leopard, my caps lock and num lock lamps are lit after startup. However, all other keys work normally, caps lock and num lock are not actually turned on. Is there a way to avoid this misbehaviour?

Do computers have child diseases? My computer's immune system now seems to have taken care of the caps lock/num lock problem. I haven't had any inverted startups in weeks now. Very strange!
In my experience, the treatment is to ignore the fact caps lock/num lock is lit, and to restart the computer. If you need to log in to restart, do it as if startup was normal, since caps lock/num lock is not actually turned on.
And hope for the natural healing.
Does anyone have different experiences?
/Joachim

Start with more rows/columns in Numbers?

How can I have the blank numbers template automatically start with more rows and columns? Currently for a new document, it defaults to 22 rows and 9 columns. I would like to start each document with more of each.

Hi reese,
Open the blank inbuilt template, add rows and columns to suit, then Save As Template. That will appear under My Templates in the Template Chooser. To automatically start with that custom template,
Numbers > Preferences > General > for New Documents
BTW, if you have that preference set, File > New (command n) will also open that custom template.
Also, New From Template Chooser will disappear from the File Menu. To use Template Chooser, hold down the option key when accessing the File Menu.
Regards,
Ian.

How to test if String starts with a Range of numbers

Hello,
I'm reading in a line from a text file and I want to see if that line starts with numbers.
I know there is
String temp = file.readline();
if (String temp.startsWith(?1-9?); // want to check if string starts with 1 thru 9
Thanks!

Try the following:
String temp = file.readline();
if (temp.equals("1") || temp.equals("2")....... || temp.equals("9") {
System.out.println("String is beetween 1 - 9");
else{
System.out.println("String is not beetween 1 - 9");
Replace the "....." by the other values... I know it's quite long, but it should work... must be an easier way though...
Pierre

How can I add header on printing with Numbers

How can I add header on printing with Numbers? The previous version use to have it and I cannot find it in the new one ...

Hi Tanya,
Glad to hear that you found how to edit page headers and footers in Numbers 3.2. I agree that Help in Numbers 3 is woeful. No searchable PDF to download and use offline. All is online (one page at a time) and we need to know the terms we are looking for before we look.
The first HelpDesk:
http://www.youtube.com/watch?v=pQHX-SjgQvQ
For printing to paper where layout is important, I use Numbers '09 (Numbers 2.3) with its Print View. But it is orphanware. As the name suggests, there has not been a major overhaul since 2009. With that in mind, it is a useful version to hang onto while we hope and wait (and provide feedback to Apple) for something in future versions of Numbers 3.x to provide better layout capability.
Indeed, each new update of Numbers 3.x has restored more of the old features while adding new features that are enhancements over Numbers '09. Many of the Numbers 3 enhancements reflect long-awaited wishes through this forum, and were passed on by Numbers Feedback to Apple. So it seems that Apple does take heed of feedback.
In the meantime, I enjoy the charm of Numbers '09 whilst exploring the new features of Numbers 3.
What has been GAINED in Numbers 3 is here:
https://discussions.apple.com/thread/5473882?start=75&tstart=0
(Very long thread because it started with Numbers 3.0, and enhancements have continued through Numbers 3.2).
Hints on workarounds in Numbers 3 is here:
https://discussions.apple.com/message/23622372#23622372
Some workarounds are no longer needed, but what amazes me is how many Numbers '09 features (the so-called "lost" features) were not lost; the settings have simply been moved. Moreover, many features such as margin settings carry over with a Numbers '09 document or template into Numbers 3.
Hints for layout on screen before printing to paper:
Try Alignment Guides and Rulers as suggested here:
Print View workarounds
Use a layout guide:
Layout Guide for Numbers
Regards,
Ian.

Select query with numbers

i have an index on my site, which select bands by the letter
that is clicked
<cfquery name="results"
datasource="#APPLICATION.DataSource#">
SELECT *
FROM artist_art
WHERE bandname_art like '#url.firstletter#%'
</cfquery>
http://www.musicexplained.co.uk/index.cfm
thing is, im trying to group all bands that begin with a
number together, and am unsure of the symbol which refers to "all
numbers" in coldfusion..
Have looked everywhere, but this place seems to be the only
place with the answers lately, so...
thanks

I only got the substring thing from dan, never heard of them
before....
anyway, on my site i have an index that works fine with
letters.....when you click on a letter on the index page, this
letter gets passed to the url, which then powers the query
SELECT *
FROM artist_art
WHERE bandname_art like '#url.(a-Z)#%'
i now need to cover numbers in this index as well, as some
musicians band names start with numbers.......this website achieves
what im referring to
http://songmeanings.net/ using
the # symbol in the index to select any artist whose name starts
with a number
thus what im looking for is a symbol that refers to all
numbers...so i can say
SELECT *
FROM artist_art
WHERE bandname_art like '#url.(anynumber)#%'

I'm trying to input phone numbers starting with 0, into Numbers spreadsheet. It keeps deleting the 0- any clues?

I'm trying to input phone numbers starting with 0 into Numbers Spreadsheets. It keeps deleting the 0. any clues anyone?

select the cells (or column) where you are entering the phone numbers and change the format to "Text":
Then "Natural" way to write numbers is to omit leading zeros.
Another ways is to leave the the cell format as "Automatic" and type a single quote BEFORE entering the phone number... like this:
'0408

What about numbers that start with Zero

When I enter numbers that start with Zero (EX: 08794) in a cell, Numbers automatically drops the zero. I WANT THE ZERO. How can I do that. I've tried changing the formula to numerals and automatic. Same thing.

Numbers starting with zeros are usually "labels" rather than "numbers" used in further calculations. If that's the case with yours, the easiest solution is to set the format of the cells where the 'numbers' will be inserted to Text.
An alternate, useful only if all of the 'numbers' are the same length (eg. five digit zip codes) is to set a Custom format for the cell(s).
Use the Cell Format Inspector ("42" button in the Inspector) to apply either of these settings.
Regards,
Barry

Tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery

tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery for two ouers. After the internet recovery the same problem with reinstalling OSX message

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

Automatically start with numbers lock on

Similar Messages

Maybe you are looking for