Automatically switching between Visualization and Music Video modes

While playing back a mixture of both music (mp3s) and music videos is it possible to automatically have the video output switch between the visualizer for mp3s and the music videos themselves?
Any help would be appreciated.
Eric.

I see about 30-80 MB memory usage increase while switching to fullscreen and it is falling back while switching back to normal mode.
I think the "freeing" of the memory is to agressive and produces such "lags."
@Adobe: This should be optimized with the next versions.
Update:
With the Plash Player plugin (Firefox Nightly/Opera Next) it is worse and with Active-X (IE9) it seems to be ok.

Similar Messages

Automatic switch between personal and business mod...

Hello,
I appreciate particularly the personal / business home screen content differentiation on the E55. My wife uses E75 and appraises it as well. We have a problem though: it is quite boresome to have to switch manually when you leave or come home.
Does anyone know that can be done automatically, for example during business days and hours ?
Thanks
Daniel

Unfortunately no.
My suggestion is to try both and stick with the one that looks best on the most channels that you regularly watch. I have a 720p LCD but the 1080i setting in my DVR provides the best HD picture by just a little bit.
Also, you have an option you can set for the SD channels (SD Override). I prefer OFF, which means that the SD channels are sent to my TV also using 1080i. This results in a slightly worse SD picture than using 480i or 480p, but eliminates the extremely annoying 2-4 second delay (HDMI re-sync) when switching between HD and SD channels. Again, I suggest you try the various settings and pick the one that you like best (or hate less?)
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7C, Build 09.83
Keller, TX 76248

Automatic switch between 720p and 1080i

I just got FiOS installed today and as I was going through the menu, I noticed that for the video resolution, you are forced to pick a format. Is there a way to set it up so that the STB automatically picks the resolution that the broadcaster has chosen? I don't want to watch everything in 1080i or 720p. I'd like to watch it as the channel has chosen to send the signal
Solved!
Go to Solution.

Unfortunately no.
My suggestion is to try both and stick with the one that looks best on the most channels that you regularly watch. I have a 720p LCD but the 1080i setting in my DVR provides the best HD picture by just a little bit.
Also, you have an option you can set for the SD channels (SD Override). I prefer OFF, which means that the SD channels are sent to my TV also using 1080i. This results in a slightly worse SD picture than using 480i or 480p, but eliminates the extremely annoying 2-4 second delay (HDMI re-sync) when switching between HD and SD channels. Again, I suggest you try the various settings and pick the one that you like best (or hate less?)
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7C, Build 09.83
Keller, TX 76248

Two Second Skip Switching Between Windowed and Full Screen Modes During Playback YouTube videos

I am finding that every video I watch skips two seconds every time I switch back and forth from Full Screen mode. Happens mostly with 720p videos in YouTube.
Can be replicated by pausing the video (also possible during playback, pausing it was just to determine how long the skip is), switching to Full Screen and back, noticing the two second change on the timer.
Main operating environment is Opera browser on Windows 7 (x86), Flash ver. 11.1.102.55 and 12beta. I have also been able to replicate the problem on Internet Explorer ver. 9.0.8112.16421

I see about 30-80 MB memory usage increase while switching to fullscreen and it is falling back while switching back to normal mode.
I think the "freeing" of the memory is to agressive and produces such "lags."
@Adobe: This should be optimized with the next versions.
Update:
With the Plash Player plugin (Firefox Nightly/Opera Next) it is worse and with Active-X (IE9) it seems to be ok.

Using Automator or Applescript to switch between 32 and 64-bit modes

I'd like to use applescript or automator to create something that would switch logic in and out of 64-bit mode (yes, I'm lazy). I've been fooling around with automator to no avail...anyone have any solutions?
Thanks in advance.

As a Launchbar devotee, it's pretty easy for me - to run Logic I hit command-space (to activate Launchbar) then "l" (lower case L) to select Logic and return to run it.
If I wanted to change mode I do command-space (activate Launchbar) l (to select Logic) then command-I to do a get info, untick the box and go.
None of this tedious open finder windows and locate the application bundle etc... I do a huge amount via Launchbar, it's about the quickest most efficient way of doing many things.
Not sure about Applescripts, my guess is it would be quite clunky and slower than the way I do it...

Switching between 64 and 32 bit modes?

Are there any known issues with rebooting from 64 bit to 32 bit mode in 10.6.4 Server? Has anyone noticed broken services as a result of changing this?

The iSCSI initiator for Drobo products is very buggy under 64bit. Switching to the 32bit mode has drastically improved the speed.

7344 servo motion switching between open and closed loop operation

I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
Bob

Jochen,
Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
Bob

My phone automatically toggles between silent and ringer mode. How to fix ?

my phone automatically toggles between silent and ringer mode. How to fix ?

Hey there Sam1011,
It sounds like you are not flipping the side switch but the phone keeps muting and unmuting by itself.
I would start by toggling the side switch manually to mute, then unmute. Then evaluate it for a bit. If the issue persists, reset the phone with this article and test the issue.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears
If the issue persists I would next backup your phone to iTunes and then restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
All the best,
Sterling

MacBook Pro won't automatically switch between internal speakers and display audio

I have a MacBook Pro that connects to a LED Cinema display. It used to automatically switch between internal speakers and display audio when plugged in to the display but won't anymore. I have to manually change it in System Preferences --> Sound. Does anyone know how to make it do that again?
thanks,
Ben

I just want to add, I have the same problem, and just want to help raise awareness of it.
1st, the problem only started recently (have been using the Thunderbolt display since it was released), I did not have this problem, and noticed it beginning only in the last month. (since January)
2nd, My particular setup, includes a hard drive attached to the firewire port on the back of the Thunderbolt Display (so, I am wondering if anyone else experienced this problem with a firewire drive being connected).
     My full setup:
          Macbook Air (2011)
         Thunderbolt display
          Western Digital drive (attached to firewire of display)
3rd, If I go into settings, what I will see is the "Display Audio" is selected (but no sound coming out),
If I then select "Internal Speakers," a buffered "history" of all the sounds I did not hear is then played (pretty funny actually) - for example, if I sent mail, adjusted the volume, and started playing a song.... it immediately plays all those sounds when selecting "Internal Speakers"
4th, If i then select "Display Audio" - it does nothing
5th, what I have to do, to resolve this is: eject all my hard drives, disconnect the thunderbolt cable, then reconnect the thunderbolt cable, and everything works as normal.

Missing link between Itunes and Music Loaded from CDs

Somehow itunes no longer recognizes the link between itunes and music loaded from my Cds (error message in itunes indicates original file could not be found). I can establish this link manually one by one and the songs play but how can I establish this link other than manually one by one in itunes ?

    Hi again!
     I saved the last message by accident which caused the reply to be sent off and so I had not finished what I wanted to write. Aploogies.
     I didn't find the new iMac hybrid SSD/Disk system easy to understand when it arrived over a year ago. I eventually decided that the 256 SSD section would be best suited to having the Operatin System for greater speed and I must have decided to put the music files on the 1TB internal hard drive along with photos and raw video clips. I can't honestly remember. There was a lot to take in. I wasn't even aware until this failure that iTunes had a default location.
     In addition to having the iTunes folder on the internal 1TB hard drive, I used Time Machine to store the entire computer contents on a 1TB Western Digital external hard drive. I had done my last Time Machine back-up on the 13 February and so I was hoping that by opening one or two songs on the back-up, they might reactivate the 'old' interface with the original playlists on it. That didn't happen but I then realised, while I was still in the Tme Machine back-ups on the WD external hard drive, that in the iTunes Media folder contained within the iTunes folder on the default Users/Username/Music location there was only an Add automatically to iTunes folder which was empty. While still still looking through the Time Machine back-upsI saw that the music instead was stored on the 1TB of internal hard drive as outlined on the first post:
     'The music files are located in folders (name of artists), within a folder (iTunes Music), within a folder (iTunes), within a folder (Music), within a folder (username) on the 1TB of internal disk drive.'
   The iTunes.itl file was last modified on Monday at 21:52. Created on 17th February, 2012. Size 386KB
     Regards,
     DG.

Switch between speakers and headset on X-

I've got X-Fi Fatalty FPS edition and desperately need to find a way to switch between headset and speakers. Especially since I use teamspeak a lot in games and don't want my speakers to echo while I'm talking.
There is an option to mute speakers when the headphone jack is connected, but that requires me to reconnect the headphone plug each time I want to use them.
There must be a switch to turn only the speakers off manually as well?
With Soundblaster Li've! Digital, this problem was easily solved by switching between digital mode on and off, as my speakers were connected digitally and my headset on analog.
But with X-Fi, there's no way to turn off the digital speakers alone.
Please help.

Plug your speakers into the soundcard as usual.
use the front mounted headphone socket on the fromt of the X-Fi I/O unit to connect your headset and set the control panel to automatically mute your speakers when the headset is connected. Your speakers will mute when the headset is plugged in and all you have to do is plug or unplug the headset at the front to switch modes!...Now please do not ask about doing the same with your mike connector!! see other thread by me!! p.s creative do ship a /4" to 3.5mmm adapter with the card.
Hope I have understood your post
AndyMessage Edited by slef2003 on 0-4-2006 03:54 AM

Easy way to switch between Headphones and Surround in

I'm looking for some sort of utility that can make it easier to switch between headphones and surround speaker setu
ps.
As it is right now, I use my headphones for FPS gaming and such but when I listen to music, etc., I want to then have XP go back to settings for 5. surround. I keep both my headset and speakers hooked up and just power off the speakers when I used my headphones.
Is anyone aware of a utility that can automate this?
At the worst perhaps just a tray icon that I can quickly select the desired setup but better would be a utility that watches the current apps and lets me tell it what the right settings are for each and change it on the fly.Message Edited by Agrajag on 0-08-200804:57 PM

i don't know of any way to automate this process.... i have speakers and a surround sound system, but my computer is usually set to the surround sound setting. i just leave it like that when i use my headphones. the headphones work alright when the surround sound setting is on, as far as i can tell. hope this helps

Can't switch between HDMI and VGA displays

I have a new H430, with hdmi and vga ports. My HP zr2240w monitor permits switching between AVG and HDMI displays, which I would like to do. But when I plug in both cables (HDMI and VGA) only VGA will work. If I switch to HDMI or make it the default display, the screen freezes at the desktop background: no mouse, no taskbar etc. Is is possible that the D430 video card will not support switching between displays (on a single monitor)
thanks,
saintmaur

Dear Monika and Mylenium: I figured out part of the problem, but not the solution: The shape I had drawn -and coudn't switch between fil and stroke on-is one I had already done a gradient mesh on, too. I had later abandoned the gradient mesh by using the option key to delete mesh lines, but that didn't take the shape all the way back to its original flat state. So it wasn't a plain drawn shape any more. So how do I release the gradient mesh to get back to a flat shape? I'm also having trouble keeping the shapes in RGB or CMYK mode-they keep defaulting back to greyscale. Could that also be a symptom of using gradient mesh? Note: I'm using gradient mesh for the very first time now; I've never used it before. It seems to leave a lot of unexpected baggage behind. I would send a screen shot, but if I start up Grab or Voila, all the AI pallets go away, and that's half the information. So how do I control gradient mesh?

Can't switch between fill and outline.

Here's the problem: I'm on an iMac, new, trying to use illustrator CS5. after using CS3 for a few years. In CS5, if I draw a shape, flat, in the illustration, then try to give it an outline, or change the outline, or do anything with the outline, I can't. If I click on the Shape tools in the toolbox and draw out an oval, for example, I can switch between outline and fill without any problems. Select shape, go to toolbox, select curved arrow for switching from one to the other. That's it. But if I draw a freehand shape, then try it, i can't do it. THIS IS A BIG CHANGE FROM PREVIOUS VERSIONS OF THE APP. GET IT? What is the problem? If it's something I have done, fine, tell me and I'll fix it. I tried calling Adobe support in Bangalore, and it took 30 minutes just to get the problem thoroughly appreciated by the techies. They just couldn't get the idea for half an hour! I had to go over it 4 or 5 times. And they couldn't come up with an answer. they were no help at all. I'm hoping the forum will yield better results. This is pathetic, guys. Your 90-day tech support is a worthless piece of crap, guys. The only tech support we have is this catch-as-catch-can forum. I've been using Illustrator since 1987, (illustrator 88) believe it or not, it's true. And I've always been able to get tech support to cure the ills. Not any more. Is that the way Adobe plans to offer tech support? if there were a way to contact Adobe Tech Support by going around Adobe Bangalore, i would use it. But, alas, I am stuck with this.

Dear Monika and Mylenium: I figured out part of the problem, but not the solution: The shape I had drawn -and coudn't switch between fil and stroke on-is one I had already done a gradient mesh on, too. I had later abandoned the gradient mesh by using the option key to delete mesh lines, but that didn't take the shape all the way back to its original flat state. So it wasn't a plain drawn shape any more. So how do I release the gradient mesh to get back to a flat shape? I'm also having trouble keeping the shapes in RGB or CMYK mode-they keep defaulting back to greyscale. Could that also be a symptom of using gradient mesh? Note: I'm using gradient mesh for the very first time now; I've never used it before. It seems to leave a lot of unexpected baggage behind. I would send a screen shot, but if I start up Grab or Voila, all the AI pallets go away, and that's half the information. So how do I control gradient mesh?

HT201269 I am trying to transfer Music and Music Videos from an iPad to a new iPad 4. I tried the backup route and everything transferred except the music and music videos. I don't want to do that again because it will mess up other applications. Any su

I have switched to a new iPad and transferred all the needed aps, included some high-priced ones for my business. The only thing I can't do is get my music and music videos to move. I originally tried to backup the old unit and restore to the new unit and this was successful for a lot of the aps, it didn't work for the music. It also messed up several aps that I had already initialized on the new unit and I had to go through the whole process again. How can I move my music without damaging other aps?
Thanks for any help.

The contents of the Music and Videos apps aren't included in a device's backup. If you don't have them on your computer's iTunes library then if they are iTunes purchases then you should be able to copy them back from your old iPad via File > Devices > Transfer Purchases and you can then sync them to your new iPad. If some/all of them are not iTunes purchases and you don't have them on your computer nor on your backup of your library then there are some programs listed half-way down this page which should be able to copy them back : https://discussions.apple.com/docs/DOC-3991

Automatically switching between Visualization and Music Video modes

Similar Messages

Maybe you are looking for