Automatically Tagged the PDF files Created from Templates
I have some PDF templates which have texts, fields, table, or lines in it. They are made accessible by tagging manually and creating special reading order when press tab through the pages.
After run a program which uses Adobe FdfApp and FdfDoc object to add data in the fields of the templates and save as an fdf file, then use CAcroAVDoc / CAcroPDDoc object convert fdf file to a PDF file. This PDF file will keep special reading order when press tab through the pages, but no Tag. (Tagged PDF: is No).
Is there a way can keep the tag of PDF templates, after run FdfApp? If not, how automatically to create the PDF file tag or import tag from its template?
No, the process of importing an FDF into a PDF does not maintain any tagging.
Similar Messages
-
Error in opening the PDF file created from the smart form output.
Hi All,
i have a simple smart form which takes 3 values like customer no, name and no of times customer called and gives an out like
Customer 0001000000 with name Ravi called 5 times today.
I have to send this output to mail as an attachment.
for this i am coding as below.
******Call the SSF Function module
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = Form name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = lv_fmname
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
lv_partner_number = '0001000000'.
lv_name_org1 = 'Ravi'.
lv_z_no_calls_day = '5'.
lw_ctrlop-getotf = 'X'.
lw_ctrlop-no_dialog = 'X'.
lw_compop-tdnoprev = 'X'.
lw_compop-tddest = 'LP01'.
*******Call the Form Function module and get the OTF of form output
CALL FUNCTION lv_fmname
EXPORTING
name_org1 = lv_name_org1
partner_number = lv_partner_number
z_no_calls_day = lv_z_no_calls_day
control_parameters = lw_ctrlop
output_options = lw_compop
user_settings = ' '
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
i_otf] = w_return-otfdata[.
*********Now here if i look in to the OTF data i got in debug it has the data i aniticipated along with some other data.
the output is in the format
TDPRINTCOM(2) TDPRINTPAR(70)
ST XXXX.. customer 0001000000 with
name.....
i have my data in the above format spread in three lines of the output otf table where XXXX... is some number.
***********To convert to PDF Format
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = lv_len_in
BIN_FILE =
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
*********For testing purpose i created a file on the desktop with the the data in i_tline. it created PDF file but when i tried to open it it's giving an error.
i_objtxt = 'test with pdf-Attachment!'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
READ TABLE i_objtxt INDEX v_lines_txt.
wa_doc_chng-obj_name = 'Smart Form'.
wa_doc_chng-obj_descr = 'Frequent Caller Alert_Day'.
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + STRLEN( i_objtxt ).
*********Creating the Entry for the document
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
i_objbin] = i_tline[.
DESCRIBE TABLE i_objbin LINES v_lines_bin.
READ TABLE i_objbin INDEX v_lines_bin.
i_objhead = 'Frequentcaller list_Day.pdf'.
APPEND i_objhead.
************Creating the entry for the attachment.
CLEAR : i_objpack.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'ATTACHMENT'.
i_objpack-obj_descr = 'FCA'.
i_objpack-doc_size = v_lines_bin * 255 .
APPEND i_objpack.
CLEAR i_reclist.
i_reclist-receiver = 'mail id'.
i_reclist-rec_type = 'U'.
APPEND i_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = i_objpack
object_header = i_objhead
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
This is all i am doing.
It is sending a mail with the attachment but we are not able to open the attachment. it's giving an error like file is damaged and couldn't be repaired.
I serched in the forum but i couldn't get the answer.
I suspect there is a problem in getting the OTF data..
Please help me in resolving this issue....
Thanks in advance.
RKCheck the sample , and see where you made the mistake.
REPORT ZPDF_MAIl.
DATA:
w_fm_name TYPE rs38l_fnam,
w_bin_filesize TYPE i,
w_filesize TYPE i,
w_lines_txt TYPE i,
w_lines_bin TYPE i.
DATA:
wa_ctrlop TYPE ssfctrlop,
wa_outopt TYPE ssfcompop,
wa_objhead TYPE soli_tab,
wa_buffer TYPE string,
wa_doc_chng TYPE sodocchgi1.
DATA:
BEGIN OF t_mail_ids OCCURS 0,
mailid TYPE ad_smtpadr,
END OF t_mail_ids,
t_otfdata TYPE ssfcrescl,
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
t_pdf_tab TYPE tline OCCURS 0 WITH HEADER LINE,
t_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z195_TEST'
IMPORTING
fm_name = w_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc EQ 0.
ENDIF. " IF sy-subrc EQ 0.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION w_fm_name
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_outopt
user_settings = 'X'
IMPORTING
job_output_info = t_otfdata
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF. " IF sy-subrc EQ 0.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = w_bin_filesize
TABLES
otf = t_otf
lines = t_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF. " IF sy-subrc EQ 0.
LOOP AT t_pdf_tab.
TRANSLATE t_pdf_tab USING '~'.
CONCATENATE wa_buffer t_pdf_tab INTO wa_buffer.
ENDLOOP.
TRANSLATE wa_buffer USING '~'.
DO.
t_record = wa_buffer.
APPEND t_record.
SHIFT wa_buffer LEFT BY 255 PLACES.
IF wa_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
t_objtxt = ' To Change the COR, Use the Transaction ZCOR_CHANGE'.
APPEND t_objtxt.
t_objtxt = ' Check the Attached PDF file for COR'.
APPEND t_objtxt.
DESCRIBE TABLE t_objtxt LINES w_lines_txt.
READ TABLE t_objtxt INDEX w_lines_txt.
READ TABLE t_objtxt INDEX w_lines_txt.
wa_doc_chng-obj_name = 'COR Display'.
wa_doc_chng-expiry_dat = sy-datum + 10.
CONCATENATE 'COR' "w_cornr
'-' "w_stat_descr w_action_desc
INTO wa_doc_chng-obj_descr SEPARATED BY space.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = w_lines_txt * 255.
CLEAR t_objpack-transf_bin.
t_objpack-head_start = 1.
t_objpack-head_num = 0.
t_objpack-body_start = 1.
t_objpack-body_num = w_lines_txt.
t_objpack-doc_type = 'RAW'.
APPEND t_objpack.
t_objpack-transf_bin = 'X'.
t_objpack-head_start = 1.
t_objpack-head_start = 1.
t_objpack-head_num = 0.
t_objpack-body_start = 1.
DESCRIBE TABLE t_objbin LINES w_lines_bin.
READ TABLE t_objbin INDEX w_lines_bin.
t_objpack-doc_size = w_lines_bin * 255 .
t_objpack-body_num = w_lines_bin.
t_objpack-doc_type = 'PDF'.
t_objpack-obj_name = 'COR'.
t_objpack-obj_descr = 'COR Test'.
* concatenate 'COR' w_cornr into t_objpack-obj_descr
* separated by space.
APPEND t_objpack.
*LOOP AT t_mail_ids.
CLEAR t_reclist.
t_reclist-receiver = 'INTENATEMAIL'.
t_reclist-rec_type = 'U'.
APPEND t_reclist.
*ENDLOOP.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = t_objpack
object_header = wa_objhead
contents_bin = t_objbin
contents_txt = t_objtxt
receivers = t_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc EQ 0.
ENDIF. -
PDF file created from Oracle Report is attached wrongly
Hi,
Please help. It is very urgent.
I am using Oracle Developer 10gR2, Oracle Report 10.1.2 on Windows 2000.
I would like to attach the PDF file created by Oracle Report to the Notification sent from Workflow.
I use the following package procedure in my Workflow.
procedure Create_File_Attachment (document_id in varchar2, display_type in varchar2, document in out blob, document_type in out varchar2)
is
l_itemtype varchar2(100);
l_itemkey varchar2(100);
l_output_directory varchar2(30);
l_filename varchar2(255);
src_loc bfile;
bdoc blob;
src_offset number := 1;
dst_offset number := 1;
amount number;
begin
l_itemtype := substr(document_id, 1, instr(document_id, ':') - 1);
l_itemkey := substr(document_id, instr(document_id, ':') + 1, length(document_id) - 2);
l_output_directory := 'USR_TMP_DIR';
l_filename := Wf_Engine.GetItemAttrText(l_itemtype, l_itemkey, 'ATR_FILENAME');
src_loc := bfilename(l_output_directory,l_filename);
dbms_lob.createTemporary(bdoc, FALSE, dbms_lob.call);
dbms_lob.fileopen(src_loc, dbms_lob.file_readonly);
dbms_lob.loadblobfromfile(bdoc,src_loc,dbms_lob.lobmaxsize,src_offset,dst_offset);
dbms_lob.fileclose(src_loc);
amount := dbms_lob.getLength(bdoc);
dbms_lob.copy(document,bdoc,amount,1,1);
document_type := 'application/pdf; name=attach.pdf';
end Create_File_Attachment;Oracle Report created the PDF file correctly (original.pdf).
I tried to attach the PDF into my Workflow.
I can see the file is attached (attach.pdf), but it cannot be opened.
The Adobe shows : 'A drawing error occured.' each time I open the attachment.
I compare the original.pdf and the attach.pdf
However, there is one specific difference
- in original.pdf, the line started with '.' (single period)
in attach.pdf, the line is started with '..' (two periods)
Thus the attachment cannot be opened.
After I delete the period, it can be opened.
Question:
- Has someone ever succeed in attaching the PDF created from Report?
- Are the codes above is wrong?
- Or perhaps the DBMS_LOB.LOADBLOBFROMFILE always double the single period on front of the line?
- Is there any solution on this?
Note:
I have succeed in attaching PDF files unless the PDF created by the Report.
Sorry for the long post.
Please help. It is very urgent.
Any help is appreciated.
Many thanks,
BuntoroThe code looks absolutely good. I have the same code working in my system. Only difference is I use TRUE and DBMS_LOB.Session for the BLOB I use to read from the BFILE.
I can suggest one more way to handle to binary attachments if you are on Oracle 9i DB are later versions.
procedure attach_document (p_document_id in varchar2,
p_display_type in varchar2,
p_document in out nocopy clob,
p_document_type in out nocopy varchar2)
is
l_nid number;
l_directory varchar2(100);
l_filename varchar2(100);
l_content_type varchar2(100);
l_src_offset binary_integer := 1;
l_dst_offset binary_integer := 1;
l_err_msg varchar2(100);
l_amount number;
l_bfile BFILE;
l_blob BLOB;
l_clob CLOB;
file_not_found exception;
pragma EXCEPTION_INIT(file_not_found, -22288);
begin
l_nid := to_number(p_document_id);
l_directory := trim(wf_notification.GetAttrText(l_nid, 'ATTR_DIRECTORY'));
l_filename := trim(wf_notification.GetAttrText(l_nid, 'ATTR_FILENAME'));
l_content_type := trim(wf_notification.GetAttrText(l_nid, 'ATTR_CONTENT_TYPE'));
l_bfile := BFILENAME(l_directory, l_filename);
dbms_lob.createtemporary(l_blob, true, dbms_lob.Session);
dbms_lob.createtemporary(l_clob, true, dbms_lob.Session);
begin
dbms_lob.FileOpen(l_bfile, dbms_lob.File_Readonly);
exception
when file_not_found then
l_err_msg := to_char(sqlcode)||' - Attachment File "'||l_filename||'" is not found.';
raise_application_error(-20002, l_err_msg);
end;
dbms_lob.LoadBLOBFromFile(l_blob, l_bfile, dbms_lob.LobMaxSize, l_src_offset, l_dst_offset);
dbms_lob.FileClose(l_bfile);
-- Encode the BLOB content to BASE64 and attach to notification
wf_mail_util.EncodeBLOB(l_blob, l_clob);
l_amount := dbms_lob.GetLength(l_clob);
dbms_lob.Copy(p_document, l_clob, l_amount, 1, 1);
-- Mention an appropriate Content Type so that Notification System
-- understands the attachment content
p_document_type := l_content_type||'; encoding=base64; name='||l_filename;
end attach_document;Here I read the BLOB from the filesystem and base64 encode it before giving it to the Mailer. Please note that this is a PLSQLCLOB based attachment as against PLSQLBLOB that you are using.
Thanks - Vijay -
PDF file created from Oracle Report is created wrongly using dbms_lob
Hi,
Please help. It is very urgent.
I am using Oracle Developer 10gR2, Oracle Report 10.1.2 on Windows 2000.
I would like to attach the PDF file created by Oracle Report to the Notification sent from Workflow.
I use the following package procedure in my Workflow.
procedure Create_File_Attachment (document_id in varchar2, display_type in varchar2,
document in out blob, document_type in out varchar2)
is
l_itemtype varchar2(100);
l_itemkey varchar2(100);
l_output_directory varchar2(30);
l_filename varchar2(255);
src_loc bfile;
bdoc blob;
src_offset number := 1;
dst_offset number := 1;
amount number;
begin
l_itemtype := substr(document_id, 1, instr(document_id, ':') - 1);
l_itemkey := substr(document_id, instr(document_id, ':') + 1, length(document_id) - 2);
l_output_directory := 'USR_TMP_DIR';
l_filename := Wf_Engine.GetItemAttrText(l_itemtype, l_itemkey, 'ATR_FILENAME');
src_loc := bfilename(l_output_directory,l_filename);
dbms_lob.createTemporary(bdoc, FALSE, dbms_lob.call);
dbms_lob.fileopen(src_loc, dbms_lob.file_readonly);
dbms_lob.loadblobfromfile(bdoc,src_loc,dbms_lob.lobmaxsize,src_offset,dst_offset);
dbms_lob.fileclose(src_loc);
amount := dbms_lob.getLength(bdoc);
dbms_lob.copy(document,bdoc,amount,1,1);
document_type := 'application/pdf; name=attach.pdf';
end Create_File_Attachment;Oracle Report created the PDF file correctly (original.pdf).
I tried to attach the PDF into my Workflow.
I can see the file is attached (attach.pdf), but it cannot be opened.
The Adobe shows : 'A drawing error occured.' each time I open the attachment.
I compare the original.pdf and the attach.pdf
However, there is one specific difference
- in original.pdf, the line started with '.' (single period)
in attach.pdf, the line is started with '..' (two periods)
Thus the attachment cannot be opened.
After I delete the period, it can be opened.
Question:
- Has someone ever succeed in attaching the PDF created from Report?
- Are the codes above is wrong?
- Or perhaps the DBMS_LOB.LOADBLOBFROMFILE always double the single period on front of the line?
- Is there any solution on this?
Note:
I have succeed in attaching PDF files unless the PDF created by the Report.
Sorry for the long post.
Please help. It is very urgent.
Any help is appreciated.
Many thanks,
BuntoroHi,
Please help. It is very urgent.
I am using Oracle Developer 10gR2, Oracle Report 10.1.2 on Windows 2000.
I would like to attach the PDF file created by Oracle Report to the Notification sent from Workflow.
I use the following package procedure in my Workflow.
procedure Create_File_Attachment (document_id in varchar2, display_type in varchar2,
document in out blob, document_type in out varchar2)
is
l_itemtype varchar2(100);
l_itemkey varchar2(100);
l_output_directory varchar2(30);
l_filename varchar2(255);
src_loc bfile;
bdoc blob;
src_offset number := 1;
dst_offset number := 1;
amount number;
begin
l_itemtype := substr(document_id, 1, instr(document_id, ':') - 1);
l_itemkey := substr(document_id, instr(document_id, ':') + 1, length(document_id) - 2);
l_output_directory := 'USR_TMP_DIR';
l_filename := Wf_Engine.GetItemAttrText(l_itemtype, l_itemkey, 'ATR_FILENAME');
src_loc := bfilename(l_output_directory,l_filename);
dbms_lob.createTemporary(bdoc, FALSE, dbms_lob.call);
dbms_lob.fileopen(src_loc, dbms_lob.file_readonly);
dbms_lob.loadblobfromfile(bdoc,src_loc,dbms_lob.lobmaxsize,src_offset,dst_offset);
dbms_lob.fileclose(src_loc);
amount := dbms_lob.getLength(bdoc);
dbms_lob.copy(document,bdoc,amount,1,1);
document_type := 'application/pdf; name=attach.pdf';
end Create_File_Attachment;Oracle Report created the PDF file correctly (original.pdf).
I tried to attach the PDF into my Workflow.
I can see the file is attached (attach.pdf), but it cannot be opened.
The Adobe shows : 'A drawing error occured.' each time I open the attachment.
I compare the original.pdf and the attach.pdf
However, there is one specific difference
- in original.pdf, the line started with '.' (single period)
in attach.pdf, the line is started with '..' (two periods)
Thus the attachment cannot be opened.
After I delete the period, it can be opened.
Question:
- Has someone ever succeed in attaching the PDF created from Report?
- Are the codes above is wrong?
- Or perhaps the DBMS_LOB.LOADBLOBFROMFILE always double the single period on front of the line?
- Is there any solution on this?
Note:
I have succeed in attaching PDF files unless the PDF created by the Report.
Sorry for the long post.
Please help. It is very urgent.
Any help is appreciated.
Many thanks,
Buntoro -
How do I customize the password input page of the PDF documented created from Pages?
Is there a way to customize the password input page of the PDF document created from within Pages?
I created a document in Pages, on exporting I choose PDF, in the Security Options drop down I checked box password required and typed in a password, then clicked Next, then typed in a file name and then clicked Export. This created a PDF file that when I open with preview brings up a red colored page saying:
This PDF is password protected.
Please type the password below.
Password:
I want to change the color and the text and potentially add an image. I may also need to put in instruction in multiple languages not just english.
Please let me know. Thanks all!Not that I know of.
You could control click on the Pages.app and have a look inside the application package's resources to see if any of it looks like password dialog, but my guess is that it has been encoded in the main part of the application and altering that, even if you could, would probably result in a check-sum error or failure to take updates.
Adobe Acrobat has more control over its .pdfs but its password verification, I think is also part of the application.
Peter -
I am unable to open PDF files created from another PGM.
Is there an ADOBE pgm that will properly read in PDF files created from another pgm and convert them to ADOBE PDF so they do not error when they are opened to be viewed by ADOBE pgm?
There is no way to know all the different scan/fax/pdf printers that are used to make the original PDFs...
CAD-KAS PDF Editor 2.6 is used to edit the files
doPDF 5 is used to modify pdf file.
Interesting, I can use the free CAD-KAS PDF reader to open & read the PDF file that the ADOBE XI reader
gives me the above error message. -
Problem with printing pdf file created from Illustrator
Hello,
In a drawing I created with Illustrator 10.0.3 I covered part of a circle with a white rectangle (to make it disappear). I saved it as pdf. When printing the pdf (under Linux with a HP printer), the covered part reappeared. However the pdf-file is how it should be. Anybody knows what the problem is?No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.
-
How to use sdk to get the image in the pdf file created by illustrator?
I have some pdf files create by illustrator and saved as pdf documents,
now I want to use the sdk to get the image in pdf files.
how to?
Thanks.Thank you first!
Yes,you are right,since I am new to illustrator,and I want to try to write a plugin,
I have read the sdk doc and API and opened the sample in vs2010,but no idea about how to operate the pdf doc in illustrator with api.
Hope more advise or any examples,thank a lot. -
Unprotect the PDF file Created by Designer 7
Can anyone help me to unprotect the file created by designer 7. I didn't trigger the security features of this program. What happen is that, I already finished the design and already save the file but when I try to use Professional 7 to merge it with my other PDF, the error message appear "The file .....PDF is protected." I'm a first time user of this program.
ThanksI have the same problem. I created a form from a pdf file and then wnated to add a page, from another form, as you can do with acrobat and the "insert pages" is grayed out. I tried to create a pdf file by "create pdf...from multiple files" and I get the "this file is protected message. I already tried to unprotect, it was not protected in the first place, and it will not let me do it.
Also if you use the page tab on the left it will not let you delete a page.
Can anyone help?
Thanks,
Dennis -
adobe automatic update to XI caused the reader of my pdf files to stop working. The reader tries to open -- the adobe reader window opens for a few seconds, nothing in the window is activated -- then the window automatically closes.
I have uninstalled and reinstalled previous versions that used to work but the reader 9 and X now do the same thing. open, unactivated window after a few seconds the program then shuts down.
I cannot open and read any pdf file on this computer.
There are no error messages and everything seems normal. The program does not work properly.
I have ran the windows diagnostic tools to no avail.
This computer operates windows 7See if you can open the EULA.exe file in the folder that contains the install of Reader or Acrobat.
-
Compressing a pdf file created from a pages document
i have a file i need to send that is 5 MB. I have the new MacBook Pro. Normally I create the file in pages and then save it as a pdf, but it is too large to e-mail. there seems to no longer be the compress as pdf option. any suggestions?
Select the lower quality setting when Exporting to PDF.
It helps to trim and resize the resolution of any images before placing them into Pages as well.
Peter -
Is there a way to import a .pdf and create a template in Pages?
Or is there some other application which would work to make this possible? It's a calendar which is in .pdf form, it's easy to read with Adobe Reader but I'd like to turn it into a template to personalize it.
Cube 450mhz; iBook G4 Mac OS X (10.4.7)It is very tricky to modify the content of PDF files. PDF is almost a one way street. You create or export to PDF, and that's it. Adobe Acrobat Professional is able to do some modifications, but not much.
Usually it is better to try to get the original file, which the PDF was created from or recreate it from scratch yourself. -
Mavericks CPU can't open pdf files created on Yosemite
I've looked around for this issue, but I haven't seen any questions similar to mine.
My wife and I have identical MacBook Pros. Hers is running Mavericks, while I've updated mine to Yosemite.
By chance, we realized that if I email her files created on my laptop, she can't open them. I've sent her Pages files, and the same files converted to PDF. So, either on Preview or Pages, she cannot open those files I've sent her.
I know that the easy answer is "update your wife's laptop to Yosemite," but I'm rather curious whether there's a bug in the system that hasn't been discovered. Besides, my wife is quite happy with Mavericks, and that's fine by me.
Any help or suggestion in this regard will be greatly appreciated.
Regards,
BKI just tested opening a Pages v5.5.1 file on Yosemite and Exporting it to a PDF file. Then I copied the PDF and Pages files over to another Mac running Mavericks and I was able to open and view the PDF file. I can't open the actual Pages file in Mavericks created in Yosemite because the Pages app is a different version in Mavericks (v5.2.2) and not compatible with the Yosemite version. But, PDFs definitely work fine and I can also open/view the same PDF file on a Mac running Mountain Lion. So, Preview in Mavericks and Mountain Lion, for me, open and view PDF files created from Yosemite/Pages without issue.
Have you tried opening your PDF file on another Mac running Mavericks?
You might try reinstalling Mavericks on top of itself. Maybe Preview in Mavericks is somehow corrupt. On the Mavericks Mac, you can redownload/reinstall Mavericks from the App Store using the same Apple ID that originally downloaded it. Or restart the Mavericks Mac into the Recovery HD (Command+R) and Reinstall OS X from there. Back up before you do the reinstall. The reinstall won't harm any data or apps. It just installs the OS over itself. -
Printing the PDF file of your iPhoto book
I am having a problem printing my saved PDF file. It comes out like the image was dragged across the page diagonally. I can print the file from Preview ok. Any ideas as to what is going on? Other PDF files - non iPhoto- print fine. Do I need yo worry about this for my book purchase as I understand it is via a PDF file?
Lady Jane KHi Lady Jane K,
Just experienced the very same problem, printing a PDF file created from iPhoto and viewed and printed from Adobe Reader 7.0.8.
Then I opened the PDF file from the Preview application and the printing now looks much better!
It seems that we have to print from the Preview app.
Did you print from Adobe Reader when having the problem? -
Is there any way to read the pdf file in java
Hai,
i need some advice from anyone that is there anyway to read the pdf file directly from java...
Without converting to other files(txt,html)
if it is possible please help me..
Thank youOr use the Adobe one (search the adobe site). Or search this forum, this is one of the Top Ten Qestions Asked here.
Maybe you are looking for
-
We are working on creating a fill-in PDF for clients. I've got the form completed, and have sent it to myself (& accessed it using my laptop, a PC) and was able to input my answers & send it back, no problem. But when the boss did the same thing, fil
-
After setting Firefox as my home page how do I get Firefox to open my AOL E-mail? in English
Under Firefox's "How to set home page" it states "you can set the Firefox home button to open your e-mail" How do you do this?
-
I tried to convert PDF file to Excel file and I got an error message no. 404
I tried to convert PDF file to Excel file and I got an error message no. 404
-
Missing in or out parameter at index:: 1 when attempting to save a trigger
Hi there, I am trying to make modifications to a trigger on a 10g database in Enterprise Manager. The trigger is compiled and valid, but if I make any changes to it at all, I get the error above.
-
I apologize in advance but do not speak English. I upgraded the OS X to 10.10.2 and Photoshop CS4 I do not open anymore. Tells me that there is an unsolvable problem and that I have not permission. I also have problems with illustrator