Automatically Transfer from unrestricted to quality after oneyear

Hi expert
i have requirement that after every one year from the GRN i want the materiel goes to quality check automatically. now i am doing manually by Movement type 322.
regard
nabil

QA07 can do this job. Precondition is either a shelf life date or a recurring inspection method in material master

Similar Messages

Transfer from unrestricted to quality

Dear Gurus,
I have a scenario that sometimse I need to transfer a certain quantity in the unrestricted stock to quality inspection stock and perform inspection to it.
I tried to transfer the quantity from transaction MIGO, but it didn't allow as quality is active on the material.
Keep in mind that this is not the case of recurring inspection, it is random.
How can I handle this issue?
Regards,
MaX

Hi
I will try to answer your question based on the little information provided by you.
As you have posted the stock already to the Unrestricted you can reverse the stock to quality using OSS note 175842.
Again if you do not want to reverse the inspection stock posting and ur business scenario allows you to create new inspection lot then you can use stock transfer inspection. Transfer posting ( Storage location to storage location) but create a Z movement type so that it will not effect your daily storage location transfers. Activate material for 08 Stock transfer inspection or new variant of 08, in QM view.
Post the material using MIGO
Regards,
Nitin

Posting change from Unrestricted to Quality inspection

Hi Experts,
Help please.
I am trying to do posting chnage using MB1B transaction (322 Mvt type). But I'am having an error : "Change the inspection stock of material XXXX in QM only".
I do not know what this error means, Please someone help me.
Initially, the material was received in "Quality inspection", but it was already been moved to Unrestricted. But now, we are having problem in doing posting change from Unrestricted to Quality inspection.

as the collegues already said. when QM is active you cannot do manual QM transfer postings.
But you can do a MIGO with 102, to cancel the receipt. (you have to change the proposed quality status in item detail from Quality to unrestricted before you can do this)
Then you can receive it again the standard way. It will again go to Qualtity inspection and create an inspection lot .

Stock Reversal - From Unrestricted to Quality

Hi All,
Our scenario is as follows,
Inspection takes place for a Inward material (101). Once the UD is given stock is moved from Quality Inspection to Un restricted.
Then the Raw Material is issued to Production. Some defects are observed at production Stage and they are returning it to Quality. How this can be done in SAP. I have tried to Transfer Posting (321 to 323), System says, as the Material is activated for QM Inspection, this is not possible.
Pease guide me, how to move the Material back from Unrestricted to Quality Inspection.
Regards
Sam

Hello,
You can choose a line rejection process for this. Please activate 08 inspection type for the material.
First pls do 344 movement type (MB1B) and post the material from unrestricted to block.
Then do 349 movement type for posting the material to quality from Block.
Lot will get created and you can reject the material by giving the UD and posting it to return delivery.
Please make sure that quality is active for 349 movement type in SPRO > Inspection for good movement.
Please revert back for any more doubts.
Regards
gajesh

Movement of material from Unrestricted to Quality at sub contractor

Hi Expert,
I am looking for a way to move stock from Unrestricted to Quality for stock that is stored at a vendor (sub contractor)?
Have you got any advice?

Hi Anders,
Is your wish to move your goods from unrestricted special stock at SC vendor to QI special stock at SC vendor?
In this case you may have solution, please check transaction MB1B + relevant movement type (sorrowfully I cannot check 'cause I have no access to SAP now). Please take care of choosing proper movement type with special stock category 'O'.
http://help.sap.com/saphelp_46c/helpdata/en/4d/2b909643ad11d189410000e829fbbd/frameset.htm
BR
Csaba

Posting from unrestricted to quality

Dear Gurus,
For some reasons, I need to post batches from unrestricted to quality inspection, keep in mind that QM is active. How can I make this?
Regards,
MaX

I Presume here Baches means Batches & not the Inspection lot. If yes then you can go to QA32 & put the Batch into restricted.This can be done through MSC2n also.
This can generate 341 mvt in the background.
If Only inspection lot then you can follow the root of 08 inspection type with MB1B....

Transfer Posting Unrestricted to Quality Stock

Hello friends,
I need to move the stock from Unrestricted to Quality Stock. I dont want to use Movt. 322 as it is reversal of 321. Is there any other way out?
Regards,
Navin

Hi Navin
322 mvt is the better option. 322 is not only reversal of 321. also this will be used in many occassions to bring stock from Un restricted to Quality Inspection. for example in recurring inspection (09 inspection type), material will move from Unrestricted to Quality Inspection with 322 mvt type only.
Can you please explain why you dont want to use this mvt type tp bring stock to Quality Inspection?
regards
Srinivas

Transfer posting from Unrestricted to Quality using QM

Hi Team,
Im not expert in QM, I need your help.
Here is using the module QM for quality inspection, I have the following situation:
A GR 101 was done into a PO.
Quality release the material and stock moved from Quality to Unrestricted
The detect that the Qty of pieces are not correct and now they want to reverse the GR, they tried but was not possible. Error:; Deficit of SL Stck.in qual.insp 972 PCE : 004933000301 7601 9001
So What step I need to follow in order to move the inventory from unresticted to Quality.
I already try with Mov 322 but get this message: Change the inspection stock of material xxx in QM only

If you have QM then you cannot post stock with MM movement into Q-status.
But you can reverse the GR in MIGO, but not with cancel in reference to material document. You have to do a Goods receipt to purchase order but using then movement type 102 for cancellation. Then in the detail tab you can change the quality status from the proposed quality status to unrstricted status.

HR Master Transfer from PRD to Quality

Hi All,
I have a issue in PRD for an employee in PRD.
Hence to analyse and test the same, I need to transfer/clone all his HR master data of same employee from PRD to QUality.
Is there anyway I can achieve this?????

HI,
1. There is a Cloning tool available for such thing called Clone and Test from Accenture. You can clone the data employee data from one system to another.
2. However if there is a small set of updations, you can do that manually in QA.
Hope this helps.
Param

Stop automatic transfer from my bankaccount to Skype Luxemburg.

Since Dec. 2014 every month an amount of € 12,69 is automatically transferred from my bankaccount to Skype Luxemburg. I want it to stop!!! I don't know why. I never agreed. I want it to stop!!! How can I stop it??? Why can't I communicate with somebody of Skype???

Hello. Thank you for getting in touch. I can imagine you must be concerned about this. Have you contacted your bank about this? If this is a standing order with your bank account, then you should be able to cancel that with your bank. I would also recommend that you please contact Skype customer service with the details. They may also need you to provide a proof of payment from your bank, to be able to handle your issue. There is more information about handling issues with bank transfers to be found at the following help page, but in your case I would still recommend to contact customer service using the above link. https://support.skype.com/en/faq/FA10661/i-have-a-problem-with-my-bank-transfer?q=bank+transfer I hope you are able to get this issue resolved quickly

Stock from block to quality after UD

Dear Team
We want to bring back stock from block to quality and UD is done and we can not do it through mb1b and movement type 349 because QM is activated in material, please help?
Regards
Ramesh kumar

Hi Ramesh,
I suggest you to go through the below documents. It might be helpful to you in solving the issue.
https://scn.sap.com/docs/DOC-51243
Reversal of Usage Decision and Stock Posting of Inspection Lot
Regards
Kalyan

Can't transfer from iPod to iTunes after Hard Disk re-format

Hi. I have an iPod classic and iTunes. Recently, I had to re-format my hard drive after a system crash. I thought I had my audio files backed up to an external hard drive, but it turns out they didn't copy. So, I'm trying to restore the audio files from my iPod. I've tried disabling auto-sync and using "File, Transfer Purchases..." but the audio files are not copying. Can I get some help? Thanks to everyone. -J-

Hello hallj6,
And welcome to Apple Discussions!
There are several ways you can pull the music off your iPod and onto iTunes. The first link below provides step-by-step instructions for the direct method if you have a PC as well as a few third party applications (for both the Mac and PC) if you choose to go that route instead. You can also do a simple Google search for "copy music from iPod to computer" and you should receive a number of sites that can help you out.
Just make sure that when you have your iPod plugged into your computer, that you don't hit "Erase and Sync" before completing the task of copying your music over.
Also, if you have any purchased music, you will probably have to re-authorize your computer by heading to the Store drop down menu and choosing "Authorize computer."
[5 Ways to Copy Music OFF your iPod and onto iTunes|http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipo d-windows-mac-os-x>
Here are a few more helpful sites.
[Copying Content from your iPod to your Computer - The Definitive Guide|http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipo d-to-computer]
Or
[How to copy songs your iPod to your PC|http://lifehacker.com/software/ipod/how-to-copy-songs-from-your-ipod-to-your -pc-105256.php]
Also, here is an article for the direct method that is for both Windows Vista and XP.
http://ipodtips-tricks.blogspot.com/2008/10/howto-transfer-music-from-ipodto-itu nes.html
Hope this helps.
B-rock

Need to transfer from iPod to iTunes after storing iTunes on external drive

Hello,
Question: How do I safely transfer the library from the iPod tp iTunes?
Background: I tried to move my iTunes to a LaCie external hard drive and now my music library is not showing up on iTunes. The complete music library is on my iPod and I would like to know how to copy it back to iTunes.
Currently when I attach the iPod to the computer it gives me an error message that the iPod is connected to a different library.
Some more details:
- When I opened iTunes again after attempting to transfer it to the external hard drive there was a brief set up and then the purchased songs were transfered and those songs are the only ones showing up now on the computer's iTunes.
- I did change the settings under preferences to move iTunes to the D drive (the external hard drive).
- I also tried consolidating the library. It only showed the purchased songs.
How do I safely transfer the library from the iPod tp iTunes?
Thanks so much for your help!

Copying from iPod to Computer threads...
http://discussions.apple.com/thread.jspa?threadID=988373&tstart=0
http://discussions.apple.com/thread.jspa?threadID=926222&tstart=0
http://discussions.apple.com/thread.jspa?threadID=893334&tstart=0
http://discussions.apple.com/thread.jspa?messageID=797432&#797432
Also these useful internet articles...
http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
http://playlistmag.com/secrets/2006/12/twowaystreet20/index.php
http://playlistmag.com/help/2005/01/2waystreet/
Patrick
p.s. iPod: Frequently Asked Questions
http://docs.info.apple.com/article.html?artnum=60920

Print jobs won't automatically drop from the print queue after printing

I just bought an Envy 7640. When printing multiple documents, the first print job hangs in the queue after it prints, which prevents subsequent jobs from printing. The first job continues to show a status of Printing after it prints the job. I have to manually go into the queue and cancel the finished job before the next job in the queue will print. Having to clear the queue manually each time a print job finishes is not an acceptable fix to the problem. How can I get the printer to automatically delete the print job after it prints like it's supposed to do?

Thank you for your reply. The steps that you sent are for print jobs that you cannot delete from the queue. I also found those instructions earlier, however, it doesn't apply to the problem I'm having with my printer. I don't have a problem deleting print jobs from the queue. As my previous post stated, when I print multiple documents, the first document prints but it stays in the queue with a status of Printing. Because it stays in the queue with the Printing status, it prevents the second and subsequent documents from printing. My problem is that I have to go to the queue after every single job prints and delete it from the queue to allow the next document to print. It's ridiculous to have to delete every job from the queue after it prints. The printer should automatically delete the job after it prints it, and then print the next job in the queue. How can I make the printer delete a job automatically after it prints it?? Can you please give me a resolution to this problem? Thank you.

Stock transfer from Unrestricted Stock to Sales Order Stock

Hi,
We have one sceanrio where we are transferring Unrestricted Stock to Sales Order Stcok through TC: MB1B and movement type - 413.
In this the material consumption account of the material hit is assigned in GBB/VBR. Also I have made this GL as cost element.
But during this Stock transfer the system is asking for CO- Object. I dont wantt to have any CO-Object here.
How can we resolve this.
Or is there any other Transaction event key in OBYC that needs to be maintained.
Please help.
Regards
Kami

hi
try with 413 E movement type

Automatically Transfer from unrestricted to quality after oneyear

Similar Messages

Maybe you are looking for