Automatically turns off after about two minutes

Hi,
I just got my Ipod iVideo (Latest Greatest) yesterday. Now it works will when connected to my PC and I've been able to load lots of Photos and Songs.
The problem is that when not connected to the USB cable it restarts after about two minutes. So half way through a song it turns off and gives me the apple screen and then restarts.
Any suggestions?

Try to reset (hold center & menu buttons together 6 seconds).
Or restore iPod using "iPod updater" software.
Nothings work, then you can return it and get new one from Apple store.

Similar Messages

  • My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

    My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

    Try a system reset.  It's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • My nano turns off after about a minute.  Battery is charged

    I have a new Nano, the music does not play more than 30 seconds or so.  Battery is charged.

    This is usually an indication that your headphones are not plugged in all the way.  The white part of the headphones should be flush with the Nano and no silver from the plug should still be seen.
    B-rock

  • Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

    Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
    Already gone through troubleshooting guide a zillion times. Thanks.

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • Satellite A210-128 swichting-off after about 30 minutes

    Hi, I have a problem with my notebook A210-128, it switches off after about 30 minutes of working and after it does not start for about 3 minutes.
    When I play some new game in high details it switches off faster. I assume that it can heat up, because the base of my notebook becomes hotter quicker than it was before.
    How can I check the temperature of my processor to exclude this reason or is it something else?
    Please help.

    Hi!
    The notebook gets too hot and so it turned off by itself.
    You should always ensure that there is enough free space around the notebook. This is important for good air circulation.
    So dont use a notebook in bed, couch or something else because this not good for the air circulation.
    In your case I would clean the internal cooling fan. You dont need to disassemble anything. To clean use compressed air spray and could blow away the dust from the cooling ventilator.
    If it doesnt help you should go to an ASP (authorized service provider) and let check your notebook.
    Bye

  • Screen turns off after a few minutes and needs to be closed then opened

    hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
    thanks
    ross

    Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
    Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
    Cheers,
    Daniel

  • Photosmart B110a & Mavericks - won't print after about two minutes...

    Evening - I've been using the Photosmart B110a for a few years no problems at all with Windows XP, Windows 7 and more recently Windows 8 - I've recently bought an iMac that is running Mavericks, and it's not right.
    It took me a while to install  it, but eventually got that sorted but now it simply hangs when I try to print to it. Now, and here's the thing, if i reboot the printer, or reboot my router (TalkTalk DSL-3780) the printer comes on line, the jobs in the queue print, I can get to the webpage for the printer and all seems ok.
    But after about two minutes it "hangs" - for want of a better phrase. The print jobs queue up, the webpage hangs, and nothing happens until I reboot it.
    Now whiles it's hanging, I can still ping the router from the terminal, but no response from any of the software - unti I reboot, and then only for a few minutes, and on the cycle goes.
    It's still fine from the Windows machines not incidentally, it only seems to be doing this from the iMac.
    The reboot fix is a solution of sorts, but it's obviously not ideal.
    Reading the forums there have been lots of posts about scanning issues with Mavericks, but I've not got that far yet.
    Could you advise one way or the other?
    Many thanks, Gary.

    Hey @Wickers , I am really sorry i misunderstood the OS you are running. 
    We have exahusted all the troubleshooting steps HP has provided for this issue.  The only driver available is for 10.8 and lower.  Unfortunately this printer is not fully compatible with the new operating systems of Mac.  The only driver available is the apple update thats you you have already done, because HP doesnt have a driver,  we are very limitted in what we can do for this issue.
    I suggest maybe trying a different printer driver such as HP Photosmart 5510d e-All-in-One Printer B111h/B111j Full Feature Software and Drivers. 
    For any further support at this point I would recommend calling the HP tech support via phone.  
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html 
    Or try contacting Apple support regarding the Airprint Drivers at Contact Apple for support and service.
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • My computer shuts down after about two minutes of use or at startup. What is the problem?

    My computer shuts down after about two minutes of use or at startup. What is the problem?
    Yesterday I used it for about ten minutes.
    Yesterday was the first time using it after about 5 days.

    Could you tell me how to check my system log, and how to tell if it is the disk cache? I am pretty sure it is not the GPU as I was having the problem using a Quadro 4000 as well.
    Thanks!

  • How do i set my ipod touch to automatically turn off after a certain amount of time?

    how do i set my ipod touch to automatically turn off after a certain amount of time?

    Please check "My Music Timer" app.
    "My Music Timer" can stop iPod touch or spotify playing music.
    https://itunes.apple.com/app/id787182095
    Thanks

  • I downloaded an album and every single song is cut off after about a minute and a half.

    I downloaded an album and every single song is cut off after about a minute and a half. I checked the Help information, but there isn't a button visible to download it again. How can I fix that?

    I have a problem too - may be related to this.  I downloaded 5 albums over the weekend, plus a few singles.  Every one of them has at least 1 song that stops playing partway through, some as quickly as 5 seconds in.  Looking at the file itself, the size seems right for a song of that length, and I got no errors during download, but out of the ~75 songs I purchased over the weekend, I have 10 (so far, still checking) that are incomplete

  • When I put my ipod 4g on a boombox and turn on pandora, it turns off after about 2 hrs. Anyway to keep it going?

    When I put my ipod 4g on a boombox and turn on pandora, the music turns off after about 2 hrs. Anyway to keep it going?

    I figured it out.

  • Why does my ipod randomly turn off after 5-10 minutes of use?

    Why does my ipod randomly turn off after 5-10 minutes of use?  Is the battery defective?

    I figured it out.  Headphones were not plugged all the way in.  This support community is awesome.  Thanks everyone.

  • 15-r007TU-Display does not turn on when it automatically turns off after closing lid.

    I just purchased hp 15-r007TU, Windows 8.1 x84. I'm facing a strange problem. After all initial setup, I put the laptop on to download and install all lates Windows 8.1 patches. The display is set to tuen off automaticaaly after 5 minutes. After 5 min it did turn off as set. But then I can not turn it back on. I pressed all (except power) keys, used touch pad, closed lid and opened but it stayed off. Laptop was on and running as I could see HDD lights flickering, I could hear system sounds on pressign mute/volume keys, also I could toggle WiFi with key. I then pressed power off key to turn Windows off normally. I did turn off. I again turned it on, I could see 'hp' logo with spinning wheel and then nothing. Display is off and I don't see start screen. I have to hard reset (press power button for more than 5 seconds) then display is normal. This happens every time the display turns itself off automatically after set time or I close the lid. Only after hard reset it works normally and I see the start menu.
    The power settings I use are:
    1. never put system to standby after preset time. (either on battery or AC power)
    2. turn display off after 5 min. (both on battery or AC power)
    3. when I close lid - do nothing. (both on battery or AC power)
    4. when I press power button - shut down
    I am using Windows 8.1 x64 with all latest patches installed. BIOS updated to lates available. All latest drivers installed.
    I have not yet set password to the system to log in.
    Help would be immensly appreciate. The device is still in warrenty if it needs to be replaced.

    Hello K1200LT,
    Welcome to the HP Forums!
    I understand the computer will not sleep when you shut down the lid. You seem to have already done most of the troubleshooting I would've suggested.
    To be honest,  it is either a hardware or software-related issue. To determine this, I would like you to reinstall the operating system. It will clear up any software conflicts and allow you to start fresh.
    First, please ensure you backup your files. Here is information on how to do this: Backing Up Your Files (Windows 8)
    Once this is done, it is safe to reinstall the operating system. Performing an HP System Recovery (Windows 8)
    If the same situation occurs, the computer likely has faulty hardware. At that point, please contact HP phone support. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
    Please let me know what happens. Thanks!
    Mario
    I worked on behalf of HP.

  • HP Pavilion HPE h9-1120t Phoenix - PC Suddenly Starts Turning Off After a Few Minutes of Use

    Had this computer since July 2012 and not even a hiccup.  4 days ago, the computer suddenly began turning off. It does not shut down, it turns off like the plug was pulled. When I restart I get the Windows improper shutdown message.   There is no warning at all.  No message like the computer is overheating.  It will just happen when the computer is idle with no programs open. 
    When it shuts down, the power unit light goes out for about a minute then comes back on "green" and the computer can be restarted. 
    I have unplugged the power cord and relugged and it seems fine. 
    The computer is up to date on Windows updates and can be shut down normally.
    I have taken off the cover and cleaned out all the dust and confirmed all the fans are running just like they should.  I have left the cover off and the computer still shuts down. 
    Any ideas?  Thanks.
    Computer Specs:
    HP Pavillion HPE h9-1120t Phoenix Desktop PC
    Windows 7
    3rd Gen Intel Core processor quad-core 3.5GHz 8MB Shared Cache
    10GB DDR3 SDRAM
    2TB hard drive
    1GB DDR3 AMD Radeon 7670
    Liquid Cooling
    Blue Ray and  DVD Burner

    Everyone must be gone for the week for Thanksgiving.  Can someone help?  
    Here is the latest: In SAFE MODE, the computer never shuts down all at once. It will stay on indefinately.   I tried SYSTEM RESTORE to 3 previous versions all failed and the computer shuts down on it's own.
    I checked the computer setup menu and all looked fine, even turned off OVERCLOCKING.
    Did a reinstall of the factor Windows install and as soon as it gets to the point where it begins to initial settings (after I enter in the WiFi password), it shuts down on it's own.
    Any ideas?  Thanks. 

  • I have an iPhone 4 and recently updated the software.  Since then, the screen will not turn off after the 1 minute autolock.  How do i fix this?

    I have an iPhone 4 and recently updated the software. Since then, the screen will not turn off consistently after the 1 minute auto-lock.  How do I fix this?

    Settings>General>Auto Lock

Maybe you are looking for

  • Payment terms for a particular sales order

    Dear Gurus,   I want to trigger a particular payment term for a particular sales document type. i.e., when i create a sales order with this particular sales document type the desired payment term should be copied into sales order by default. Is this

  • Audigy 2 plat- cannot get sound from headphone output, only from rear pa

    I hjave installed the card but have not been able to get output from the headphone jack omn front panel. everything else works fine.

  • Alternate Bank account number in FF68 (check deposit)

    Dear Friends, The alternate bank number is assigned in House Bank master data, now I want to know the next  step so that this "Alternate Bank account" can appear in Transaction FF68 for check deposits. Thanking you. PP

  • Document Style/Schema questions

    We are using Weblogic 8.1 sp1 and eclipse I have some general questions about Document style web services If I create a simple web service like public String getSomething(String xmlRequest)           throws RemoteException, SomethingException then I

  • ERROR:Could not complete request

    I could not find an answer to my problem so I'm posting this messages for help. I have Squirrelmail working to the extent that I can login to webmail, set preferences, recieve messages and send messages. However, after a message is sent or I try dele