Automatically update the date on opening a document in Pages 5

I can't find how to automatically update the date on opening a document. I could in Pages 4.

Indeed. That seems to be the only answer to all the "improvements". At least now I can do a word count with or without spaces. Phew. (Note the sarcasm)

Similar Messages

How do I get pages 5.2 to automatically update the date - use 10.9.2

How do I get pages 5.2 to automatically update the date in my documents - before the update I could do this. Does anybody have the knowledge or a workaround.
If not I will dump pages 5.2 and use my old version!!! this feature is important for any and all businesses using pages??
Any advice on how to achieve this is greatly appreciated
I use a number of macs all using OSX
10.9.2

I have the same problem.
What confuses me is that all the apple provided templates in pages seem to auto update their time and date upon opening.
So there MUST be a way to do it... Ive been unable to work out how...
Amnon

Stop automatically updating the date!

How do you keep Pages from automatically updating the date when you open an invoice?

I'm running Tiger so there may be some minor differences, but I ran a few tests starting yesterday and concluded today. If you double click on the date in any of the invoice templates it will open a pane in which (among other things) is a check box that's labeled Automatically update on open. In Tiger it's unchecked by default. Check and see how yours is set. In my tests on 4 templates, when this box was unchecked the dates remained as I set them. Three I dated as 12/6/08 and one I left with the current date. All retained the date I closed with. I noted that only the one I left unchanged would respond to the double click.
Hope this helps.
Walt

Client automatically cache the data got from cache server?

Hi expert,
I have 2 questions about the client local cache. Would you please help to give me some suggestion？
1. Will client automatically locally cache the data got from cache server the first time and automatically update the data in local cache when getting the same data from cache server again? I go through the API reference but cannot find any API to query the data currently cached in the local cache.
2. If client will automatically cache the data got from cache server. Is there any way for a client to get the data event that happens to its local cache, such as entry created in local cache, entry deleted from local cache and entry updated in local cache? In my opinion, when getting an entry from cache server the first time, the MapListener's entry create event should be triggered. When getting the same entry again, the entry update event should be triggered.
However, I have tried a client with replicated cache, a client with partitioned cache, an extend client with remote cache and a client with local cache(front cache part of near cache), the client (the NamedCache object has been set the MapListener) cannot get any event notification after getting data from cache server. By the way, my listener is OK since when putting data the entry create event and entry update event will be triggered.
Your suggestion is very appreciated. :)

Hi
If I were you I would read this http://download.oracle.com/docs/cd/E14526_01/coh.350/e14510/toc.htm
and particularly the section about Near Caching here http://download.oracle.com/docs/cd/E14526_01/coh.350/e14510/nearcache.htm#CDEFEAJG
which is what you are asking about in your question.
Near Caching is how Coherence stores data in the locally - which is the answetr to your first question. How Near Caching works is explained in the documentation.
Events, which you ask about in your second question are explained here http://download.oracle.com/docs/cd/E14526_01/coh.350/e14510/delivereventsjava.htm#CBBIIEFA
It might be that ContinuousQueryCache is closer to what you want. This is explained here http://download.oracle.com/docs/cd/E14526_01/coh.350/e14510/queryabledatafabric.htm#sthref38 A ContinuousQueryCache is like having a sub-set of the underlying cache on the local client which you can then listen to etc...
JK

I have several very important school related documents on my iPad in the Pages app. Ever since i updated to iOS5, i can no longer open any documents in Pages that I made before I updated. Please help

I have several very important school related documents on my iPad in the Pages app. Ever since i updated to iOS5, i can no longer open any documents in Pages that I made before I updated. Please help

Without the iPad connected, open up iTunes on your computer. Go to iTunes/Preferences/Devices and delete the backups that you're absolutely certain do not have the documents. Refer to figure below.
iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "NO" to creating a backup. (You don't want to create a new backup that does not have the docs.) You will then be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad. This time, say "yes."
Repeat all of the above as required until you get the docs.

Automatic Update of Dates in the Transaction based on the date rule assigne

Hi Friends,
This might sound very basic but, it is a major issue at the moment in our project
I have a date type Today-20 days
I have created a Date rule Today-20 days
and assigned to the Date type and then to the Date profile and the date profile to the Transaction type
when i create an Opportunity it takes the system date as Todays date and the Today-20 days is also calculated correctly.
Till now everything is fine.
But the next day when i open and see the opportunity the Todays date is still the system date from yesterday and also the Today-20 days is the same what i saw yesterday
Unless i explicitly click and change something in the dates, they dont refresh automatically
I need a mechanism to trigger the automatic update of dates in the Business Transactions
so as to trigger an action if an opportunity is open but not touched for 20 days
Any advise would be appreciated and rewared as points.
Thanks and Regards,
Raj

Hi Raj
As any other determination the date determination takes only place as long as no dates are filled. It is triggered then only after dates are changed.
Nevertheless your szenario sounds a bit strange to me: What is the sense of always having the actual date / actual date -20 days in the date scheme? As this can easily be calculated on request you do not put this into the date scheme; only information that stays over time is put in schemes (and saved along with the opportunity main data in the DB).
So if you want to stay with the concept the only thing you can do is to re-trigger the date determination of the opportunity by e.g. modifying the dates whenever you are changing / saving the opportunty. This can be done in the ORDER_SAVE badi or in an event (search the CRMC_EVENT_CALL table for an appropriate one). In both cases you need to code some lines of ABAP though.
Hope this helps,
Kai

I have downloaded Mountain Lion, now when I try to open a document in Pages, it says I need an updated version.

I downloaded Mountain Lion this morning. Now when I try to open a document in Pages, it says I need a newer version. When I go to the App Store, it says I have Pages installed.

What version of Pages are you running now?
The newest update is 4.2 at least for the box set version I have which came out a couple of days ago.

Plz tell me the steps to update the data?,.

hai all,
Plz tell me the steps involved in updating the data from infocube to ods.it would be highly helpful if u provide any document?.
thanx,
sri

Hi,
ODS to Cube refer this thread...
ODS to CUBE
Cube to ODS refer this thread...
Cube to ODS
For the steps - DATA LOAD FROM ODS TO CUBE
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6110e07211d2acb80000e829fbfe/content.htm
Re: Steps for transfering structure from ODS to Cube
Hope it helps.
Regards
CSM Reddy

Can't open word documents in Pages since updating to Yosemite

Since updating my software to Yosemite I cannot open word documents in pages anymore. I can open these word documents in preview to at least look at them, but this is not very helpful.
Also, is anyone else experiencing a serious slow down. My Macbook is choking, and I wonder if there is anything that can be done to improve the speed.
Thanks in advance for any insight/ support you can offer!

Be sure you are saving your Word documents on the PC for a Word version supported by Office 2004 X. The latest version of Office for the PC uses a file format that is no longer compatible with older versions of Office.
PC attachments have icons that do not carry any information that Mac applications use to determine what application opens a document. Drag the document from the email application to the Desktop. Select the icon and press COMMAND-I to open the Get Info window. In the section labeled 'Open with' select Word from the drop down menu, then click on the Change All button. This should associate all similar documents to the Word application on the Mac. Word documents on the Mac also use the '.doc' extension. If the transferred file does not have the '.doc' extension then it doesn't hurt to add one.

How to update the data in database in webdynpro

I have to update the data in databse table using adaptive rfc in WebDynPro

Hi,
You can refer to these links:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/faq%2b-%2bmodels%2b-%2badaptive%2brfc
Update data into SAP Table
http://help.sap.com/saphelp_nw70/helpdata/en/41/38bc8f813719488ddc9d9b21251ec3/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/d5/1558bfa6aa80499113983e738b1b21/frameset.htm
Regards
Inder

How to Update the data in R/3 From BW

Hi All ,
I Need some suggestion . i want to update the data of MARC table in R/3 from BW . Here data goes from BW to R/3 . so How to do this ? . There are no standard BAPI's in BW for this .
Thanks
Prithvi.

Hi,
The scenario you are explaining is little opposite to what happens generally. Are you sure, you want to update R/3 from BW?
If you have to update MARC table that means you have to extend the material for different plants. Try using BAPI_MATERIAL_SAVE_DATA.
Regards,
Ravi
Note : Please mark all the helpful answers

I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I wa

I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I was informed that it may take 3 minutes to activate phone but was then presented with the screen 'Could not Activate iphone', this is because the activation server is unavailable. Can anybody shed some light on this for me?
Many thanks

Can anybody shed some light on this for me?
Not here. iOS5 beta is only available to registered developers, and discussing it publicly outside of the private developer forums is a violation of the non-disclosure agreement you signed to access the beta.

How to update the data in sqlserver table using procedure in biztalkserver

Hi,
Please can any one answer this below question
how to update the data in sqlserver table using procedure in biztalkserver
while am using executescalar,typedprocedure getting some warning
Warning:The adapter failed to transmit message going to send port "SendtoSql1" with URL "mssql://nal126//MU_Stage2?". It will be retransmitted after the retry interval specified for this Send Port. Details
Please send me asap....
Thanks...

Hi Messip,
A detailed error would have helped us to answer you more appropriately but
You can follow the post which has step by step instructions, to understand how to use Stored Procedure:
http://tech-findings.blogspot.in/2013/07/insert-records-in-sql-server-using-wcf.html
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
2013: Inserting RawXML (Whole Incoming XML Message) in SQL database

To view the data in open hub destination

Hi all,
Can anyone help me out how to check the data in open hub destination file.
These are the details:
Destination: File
Type of file : Logical file
Application Server file name : XXXXXXX
If it was file name, i know it has to be checked in AL11 with directory name and file name.
Here its a logical file name. Which is the directory corresponding to this?
Thanks,
tinkugeo

Hi,
Question: "Are all the logical files are saved in the home directory DIR_HOME?
Please correct me if I am wrong"
Ans: When you create an Open hub destination using Physical file, the file will get created in DIR_HOME directory (by default) in AL11
And for locating the physical path in AL11. Go through the below link. it gives ans to all your ques
http://bx.businessweek.com/sap/view?url=http%3A%2F%2Fweblogs.sdn.sap.com%2Fpub%2Fwlg%2F17370
Edited by: kumkum basu on May 20, 2010 8:20 AM

How to delete or Update the data in the MEAN table

Hello Gurus,
I would like to delete or update the data in the MEAN table...how to do it.
Precisely I would like to change the status of Main EAN Indicator (field HPEAN).
Kindly let me know ??
Rehards
Senthilll

programmatically, you may use [BAPI_MATERIAL_SAVEDATA|https://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata&cat=sdn_all] [EAN|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=bapi_material_savedata+ean&adv=false&sortby=cm_rnd_rankvalue]
Regards,
Raymond

Automatically update the date on opening a document in Pages 5

Similar Messages

Maybe you are looking for