Automatically utilise outsuide ip address in config

Let me explain.
At the moment we are running cersion 8.4.4.1 on our head end ASA5540 and 845 on our remote ends.Until we upgrade both ends to 845 we have the problem with DHCP and the giaddr natting. Is there anyway to detect the outside interface address and then automatically enter it into the static command to allow dhcp. as per bug report CSCtj68732.
If not then we will have to speed up the upgrade on the head end.
Thanks

Hi.
I've the same problem. Any solution?
Instead of client ip address em's User Sessions List shows the name of the db user connected to.
Thanks,
Massimiliano

Similar Messages

Cursor automatically moves to the address bar when I open a new page

Ever since I installed Firefox 4, when I open a new tab the typing cursor automatically moves to the address bar instead of the search engine bar. I have the tab mix plus addon. A solution appears to have been found for the same problem with the newtabhomepage addon, but since the two are not compatible with each other, I don't want to switch addons. Is there any way I can fix this?
Thanks!

If your using the 'New Tab Homepage' extension then this happens when you upgrade to Firefox.
Open up Firefox and click on Ctrl+Shift+A to bring up the add on/extensions menu. Have a look in the Extensions bit for an Extension that has a version no of 0.4.3. if you have it then it needs uninstalling. Then download the new file from the mediafire link
http://www.mediafire.com/?v1113g9noytswdv
You will then be asked if you sure you want to install it and drag it on to the extensions page in Firefox.
Once installed restart Firefox. Once restarted your homepage will load whenever you start a new tab.

How to automatically detect server ip address

does any one know how to automatically detect an ip address of a server from the client with a socket based connection ?
instead of prompting the client to connect to the server ip address which is trouble some.

You must start with some initial information and a known environment.
There are several possibilities after that.
- The server has a 'name'. This is not an ip address but a name like "yahoo.com". When you connect using that, even if the IP changes, the correct IP will be returned. (At least ignoring an annoying bug in some VMs)
- A specific IP address
- Use a methodoly to 'request' a server address. One version of this is to use a UDP broadcast another version uses a service manager (which itself must be found.)

Automatically adding contacts to Address Book with Mail?

Hello all,
This is my first post in the Apple Discussion forum, but I'm a happy Mac owner since July 2007. Here's a question I have; I searched to see if a similar topic appeared in previous discussions, but none turned up.
In Microsoft Outlook (on my work PC), I can set it up so that anytime I reply to an e-mail address from somebody new, the contact is automatically added to my address book. Is there a way to set that up with Mail and/or Address Book?
I was going through Address Book and noticed some VERY old contacts, but I know for some of them, I have more recent e-mail address. I hope I don't have to manually add all of them!
Thanks in advance for your help!
All the best,
MARK

Hi Mark, and a warm welcome to the forums!
Sadly, I don't know how to do it for received Mail, but ones you've sent to can be done in Mail. Select Window Menu item>Previous Recipients, press Command-A when the new window appears, and then click Add to Address Book, then in Address Book>Card Menu Item, select look for Duplicates.

N Mail, when using "reply all" why does Mail automatically include my email address in the cc line? Whey would I want to include my email address in an email I am sending. Anybody have any idea how to stop this?

In Mail, when using "reply all" why does Mail automatically include my email address in the cc line? Whey would I want to include my email address in an email I am sending.? Anybody have any idea how to stop Mail from including my email address in the cc line when using "reply all"?

Automatically cc myself is not checked. I did find out that if you have multiple email address that all of them need to be associated with "My Contact" tab. Thanks

HT1430 Iphone 5 OS 6.1.1, When I turn off or restart device, this device automatic unmute. How can i config this problem?

Iphone 5 OS 6.1.1, When I turn off or restart device, this device automatic unmute. How can i config this problem?

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

IPhone automatically places different email address in From field.

When I receive an email to my @me address (which is an alias), then hit reply to respond, my iphone automatically places my @mac address in the From field. Why won't it automatically reply from the same email that the message was received in?
Just to clarify:
I received an email to my [email protected] address. When I reply to the message, my phone automically places [email protected] into the From field.
So I have to tap the From field to switch it back to the [email protected]
This works fine on my computer. The email that received the message is the same email that is automatically placed in the From field.
Any suggestions

the .mac is my default.... but it's alway been the default and I've never has to switch it in the past. I just recently had upgrade the software on my phone, though.

How can I restore automatic display & selection of addresses of contacts when I type the first letter on my Yahoo addressee bar?

When filling out the addressees (T0, Cc, and Bcc bars) on a new mail in Yahoo, I would type the first few letters of each addressee, and get a display of the names and e-mail addresses starting with those letters. I would simply highlight the ones I wanted to include, and these would be automatically placed on the corresponding bar. For some reason, this display/autotext is not functioning. So I now have to go to "Contacts" to look up addresses that I haven't memorized.

Hi Silky-Milky!
If I understand your question correctly, you are attempting to merge your contacts from your previous phone's backup into your iCloud account, then go back to using your new phone as normal, with the new merged database of contacts. I have an article that can tell you how to do exactly that:
Recovering iCloud or MobileMe data from iTunes backups for an iOS device
http://support.apple.com/kb/TS4108
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Is there a way to automatically save e-mail addresses to address book?

I know when composing an e-mail, command-Y will result in saving the address on the outgoing mail to the address book. Is there a way to set up mail so that ANY outgoing mail I send results in saving the e-mail to my address book - automatically, without the extra step of command-Y?

In that case, you may also find the following collection of AppleScripts useful:
http://homepage.mac.com/aamann/Mail_Scripts.html

Is there a way for a form to automatically populate an email address

My form has an email link. Selecting the link opens an email window (in my case, apple mail) with address already populated. But as far as I know, the form isn't attached. If I go go to file>attach to an email, I get an email with file attached. I need to be able to select the link and have an email open with the address AND file as attachment. When I created the form, Acrobat automatically made the email a live link. Thanks in advance for your help.

It's an application only windows computers use that can create XFA (XML Based) PDF's they can have active content. Forms Like Government Forms, example IRS Tax Forms are all created with LiveCycle Designer.
And if you want to put them up on a Server you are required to use Adobe's LiveCycle Server. You must have a Fortune 250 or 500 company budget to afford using it. Cost in the thousands of dollars per month to serve the form on that server. But you can use the forms individually like regular PDF.

Is there a way for me to stop the iPad from automatically storing an email address I send mail to that is not in my contacts?

The iPad seems to automatically store email addresses for ease of use. But what if there are ever email addresses for privacy reasons that I do not want the device to remember? Can I stop the device from storing addresses that I do not specifically or manually store in my contacts list?

No. Sorry.

IP setttings changes automatically to obtain IP address from DHCP

Hi,
We have a Windows Server 2003 R2 Enterprise SP2 server. It is one of many at this location, however it is the only one that reverts to DHCP in the properties of TCP/IP. If you go into the control panel and go to network connections choose the NIC, if you
right click and go to properties and then choose Internet Protocol (TCP/IP) and view its properties. You can assign a static IP, so we enter all the IP information and click ok (and have tried apply before clicking ok) but either way if you ok your way entirely
out and then go back in to the TCP/IP properties it is set to DHCP.
So more simply, when you set a static IP in the control panel of Server 2003 it does not keep the settings in the GUI. If you do an ipconfig /all in dos it says that it is "Manually Configured" and appears ok. However if you go back in and try to
set the IP again in the GUI and then do another ipconfig /all it says you have the address that you manually assigned but it also says it is using DHCP.
Repeating this process and trying to assign a static again and doing a third ipconfig /all it will again say "Manually Configured" and the correct IP but the GUI always says "Automatically obtain" no matter what you put in and try to save.
I think this may be causing some oddities to occur with the server and I wanted to see if anyone had any ideas of how to resolve this.
Thank you in advance.

I'd check the manufacturer's web site for the latest system ROM bios and driver support pack.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

My location field on calendar automatically updates with unfinished addresses

When I enter the address in the location field of calendar, even if I type in the whole address, it sometimes substitutes it with an incomplete one which it has plucked from somewhere on the net. How to I overrule the location automatic entries with my own?

I am using Calendar on Yosemite now

Automatic signature for dedicated addresses

I have a group of people set up in Address Book that I send an email to about once a week. I want to have a special signature that will be applied to all email I send to those people. Is there a way to set that up so that signature will automatically be applied to that group rather than me having to remember to switch from my usual signature?

Hi,
I have not done but i know as in my organization we does this.
It is like we can save the signature's image in database and on check printing report , we can use that so it will come on check as well.
Overall it is possible, i may check with my collegue for some documentation etc
thanks
Shiv

I have Iphone3G - my email address was changed automatically to an old address after an software upload -- how can I get the correct email back?

When I first purchased my phone in January I had an email address of [email protected] but found that the phone and comline weren't talking to each other so I set up email [email protected] and everything worked perfectly -- calendar, e-mail, etc. Last week a message appeared on my phone instructing me to upload new software. My [email protected] for icloud was replaced my the old email address. The account was locked so I went to iforgot.apple, etc and reset it. Then I took the option to change the email and on the computer all looks correct but my phone still has my old e-mail. I've turned it off and on hoping the new info would be loaded but no luck. Any ideas?

I kind of agree with Philly on this one. If you get a new email address, there is no need to establish an entirely new account to use that address. You just need to modify your account to show the new email address. This way all your purchase history and rights to purchased apps stays in place. Creating a new iTunes/Apple account each time your email address changes really doesn't make sense in my opinion. I only point this out for future searchers who end up on this thread.

Automatically utilise outsuide ip address in config

Similar Messages

Maybe you are looking for