Automaticlly "Show Details" when connecting to Remote Dekstop Machine

here has been several occasions when I have waited for a remote window to connect to a machine until the MSTSC window disappears with no message. Each time, I find that it is due to a message that would have been easily rectified if I had noticed
that I could press the "Show Details" button (sometimes, it is greyed out at the beginning of the connection).
Is it possible to have this expand automatically when available, and how would this be accomplished?
Thanks

Hello Keith.E.Kelly,
What do you mean about ‘show detail’? Show Options?
Please share us a screenshot about grey out ‘show detail’ button.
If you mean the Options in the screenshot mentioned above, I go through
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services
in local group policy editor, but can’t find any project to enable it.
About the group policy issue, it is recommended to ask in the TechNet Group Policy forum.
https://social.technet.microsoft.com/Forums/Lync/en-US/home?forum=winserverGP
As you have the problem about “MSTSC window disappears with no message”, the computer has this issue when it tries to connect to any remote computers?
Please open the Local group policy editor and go to Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits\End session when the time limits are reached,
disable it and check if the MSTSC windows disappear again.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

Error message (-3256) appears when connecting to remote speaker

An error occured when connecting to remote speaker. An unknown error occured (-3256).
ANy help would be most appreciated. Thank you.

I get the same message and have been stuck with this for weeks since upgrade to iTunes 8, now running 8.02 and did a firmware upgrade on airport express to 6.3 but still no joy...anybody got any other ideas ? I'm about to give up and move to sonos

Freeze login window when connected disk for Time-Machine

MacBook, 13-inch, Early 2008, Lion 10.7.3 (same problem on 10.7, 10.7.2)
- Freeze login window when connected disk for Time-Machine.
In logs I can see they Time-Machine finished work successfully.
I have do hardware reset every time to login my laptop.

wongkh wrote:
If connecting the time machine after windows is up,both windows and the time machine works properly.
i can access the time machine hdd in windows.
Don't, Time Machine knows nothing about Windows, and vice versa.

When connecting to remote system, once again asking user & password details

hi
I created one RFC in R/3 system, with the same logical system name of xi, giving all technical and logon details.
When I click on remote logon to enter into xi system,it is once again asking user logon details. After entering the details it is allowing into the xi system. Directly it is not entering into remote system when I click remote logon button.
I created both sides (in xi and R/3) and checked the same thing. Both sides I am getting the same problem. it is showing client name correctly but user and password name it is displaying the same server information. like if I am connecting from R/3 to XI means it is showing XI client number but R/3 user and password. Once after I change user and password and press enter it is going into remote system.
Could someone please help me on this?
Thanks in advance and best regards,
1234

hi lavanya
Provide the user with the corresponding authorization or avoid using the protected users DDIC and SAP*
check below
Trusting Transaction SMT2
The trusting transaction SMT2 (or SM59 ® RFC ® Trusting Systems) constructs a list of all trusting systems that have been established for this trusted system. Here, a logon and authorization check for the current user and client is performed, using the destination TRUSTING_SYSTEM@S00 that has been automatically created.
This basically corresponds to transaction SM51, if you use Remote Login to perform a logon on a different application server.
If problems occur while setting the destination TRUSTING_SYSTEM@S00 (such as host name or service information), you either have to create a new destination for your needs, and then enter the host name or service information using SAP router strings, or adjust the network settings of the server. To correct the problem in transaction SMT2, you have to adjust the network configuration of the server. As this transaction is only to be used for test purposes, in this case you could also choose to ignore the error.
To perform a logon as a different user or client, you have to create a new RFC destination with a trusted option set.
In this scenario, the following error text in SMT2 can be ignored:
No authorization to log on as a trusted system (Trusted RC=0)
If the host name contains the character '_' (as in "my_host"), then the generation of the related trusting system destination may lead to incorrect settings. This problem can be corrected by implementing Support Package SAPKB46D09 (see below). For earlier releases, the changes required to correct the problem can be made manually.
regards
kummari

Error when connecting to remote speakers on intunes.

Everything is showing up on laptop but when I try to connect to remote speakers it says error. I also on my main computer where all my iTunes are located I cannot find the remote speaker symbol on the bottom of the screen. I am so close to getting this to work it is driving me crazy!! Any help would be appreciated.

Would you please describe in a bit more detail what your current networking configuration is? That is include the make & mode of each of the network devices (routers, modems, etc.) Also, please describe the general location of each, including the laptop (where you typically use it) and the "main" computer in relation to the AirPort Express? For example, are they all in the same room, in different rooms, on different floors?

SQL*Plus hangs when connecting to remote DB (Solaris, 10gR2)

First of all the particulars:
Local System:
Solaris 8, Oracle 10.2.0.4, October CPU
Remote System:
Solaris 10, Oracle 10.2.0.4, July CPU
We are trying to initiate a connection from our local system to our remote system using a DB Link. After opening SQL*Plus, we log in with <user>@<dblink>, are asked for a password, and after entering the password, SQL Plus hangs indefinitely (we typically have to kill the sqlplus process to regain our session). Also, logging into the local system with a local account, and then querying using the db link (select * from dual@<link>) gives the same result.
From the remote system, we CAN log into the local system using the same process, and we can also query the local system. in other words, it works in one direction, but not the other.
We have checked all the usual suspects: tnsnames, sqlnet, db_domain, global_names, and all are set correct for our setup (although I of course welcome suggestions to check something else in the files). Also have confirmed validity of /etc/hosts entries, and permissions on those files for the 'oracle' user. A 'tnsping' and 'ping' are both successful in both directions, though I understand these only check the listener and hardware layer.
Our Sys Admin has checked firewall connections between the two systems, and stated that they're open on the listener port (1521).
Listener log files on the remote host, when the hang happens, show an established connection from the local host.
Does anyone have any suggestions as to what to check for next?
Thank you in advance for the assist!

Whew, that truss output is enough to make your eyes bleed!
This system is on a closed network, so I cannot post the files here, nor would I wish reading those things on anyone nice enough to spend a minute here helping me out!@
But comparing the truss from the "broken" system, and the working one, the sqlplus that hangs returns a:
ERR #134 ENOTCONN on a getpeernam() thread.
The other truss (working side), does not throw that particular line, and the truss output varies widely after that line in the output fille.
After a few moments letting the sqlplus process "hang", I get:
ERR #62 ETIME
Outside of that, lust a lot of hex values!

How do I simulate a right-click in Windows when connected with Remote Desktop 8.0 for Mac OS X?

When connecting to a remote Windows 7 OS from Mac OS X 10.8.5 with Microsoft Remote Desktop 8.0.24091, I'm not able to simulate a right-click with the Apple magic mouse.
On an older version Microsoft Remote Desktop Client version 2.1.1, I can hold down shift+ctl on the Mac and click the magic mouse to simulate a right-click in Windows. With this new version RDP 8.0, I can't find any way to simulate a right-click,
other than to select "Swap mouse buttons" under settings, and then every click is a right-click and then I'm no longer able to left-click (which is even worse). I've tried several key combinations and nothing seems to work. Am I missing
something simple here with the new RDP 8.0 application, or is the right-click simulation not (yet) functional?
Any help is greatly appreciated, thanks!

In order to make use of the right-click inside an open session you have three options:
Standard PC two button USB mouse
Apple Magic Mouse: To enable right-click, clickSystem Preferences in the dock, click Mouse, and then enable Secondary click.
Apple Magic Trackpad or MacBook Trackpad: To enable right-click, click System Preferences in the dock, click Mouse, and then enable Secondary click.
Extracted from "Remote desktop Client on Mac: FAQ"
http://technet.microsoft.com/en-us/library/dn473006.aspx

Show error when connect Company Database by DI API in 2004B

Hi
I use the DI API to connect company database in 2004B. I can get the company lists by SAPbobsCOM.CompanyClass.GetCompanyList().
I write a program to testing the connection that show two different result in client and server side.
- It show the error -2147221164 (Class not registered), when connect company database in client PC.
- The same program run in server, it connected.
I already checked my config as below
- SAP 2004B is installed 7.20.145 SP:00 PL:25
- SAPbobsCOM67.dll is 6.70.188.0 version, and "Special Build Description" is 21.
The client and server side are same config.
Any ideas how I should handle this?
Thanks
Winson

sorry! it is wrong posted in here!!

TS1363 My iPod Classic is frozen. it does not show up when connected to iTunes

My iPod Classic is frozen. It will not open iTunes or show up when I open iTunes manually. How do I fix this?

thanks. I followed all the steps but it said that itouch was unable to connect to itunes because a passcode needs to be entered first, but I'm unable to enter the passcode because the itouch is disabled and all I see is the red message Ipod is disabled. How do I get pass this message to where I can access a keypad to enter code? thanks!

Can't get artist to show up when connecting to shared itunes library

I have been having a problem seeing all of my artists when connecting to itunes on my iphone. I can connect to this shared Itunes library, but when I do I can only see about 12-15 artists not the 1,000's I have. When I go to the songs tab I can see all the songs. How can I see all of my artists again?
I am using itunes 10.0.1 (on my iMac) and Iphone 5 version 6.0.2.

In your itunes on the PC, Apple TV 3rd gen does not show up ever this is normal as Apple TV3 does not store any content you can access from the PC
On your Apple TV to see your PC library, Select Computers from the front screen and it should show your pc library.
Setting up Apple TV for HomeSharing

IPod classic only shows music when connected to computer

I'm having a problem with my 160 GB iPod classic. Last week, I had it connected to my car stereo (as I always do), and when I unplugged it to plug in headphones while I was shopping, it said "no songs," apparently everything had been erased. When I plugged it back in to my macbook, it had in fact lost all my music, and before I could put anything back on, I had to reformat it in disk utility. Then, I restored and started putting music back on, which took several hours (actually a couple days), because on my computer my music is 320kbps and I have it set to convert to 128 to go on ipod. When it was finished, I ejected it, and it again said "no songs." I plugged it back into the computer, and it shows all the songs, and allows me to play from the iPod in iTunes. Has anyone else had this problem? It seems to be working fine when connected, but on its own, nothing. I use a macbook, and this is the only computer I connect it to (and it is not set to sync automatically). Battery is fully charged.

Looks like your car stereo, may have damage the hardisk, due to unreliable power supply or hard bump.
Do a disk diagnostic, here is the old post by regular contributor -tt2.
https://discussions.apple.com/thread/2362776?start=0&tstart=0
Good luck!

Listing of apps not showing up when connecting iPhone

When iPhone is connected to Macbook Pro, app listing doesn't show up to edit etc, screen shots show up on the right side, but no list on the left of apps .. please advise .. Thanks
PS .. when connected to PC laptop, list of apps shows up on left side ..

Are all apps on your iPhone available in your iTunes library on your MBP?

Camera does not show up when connected to Macbook Air

I'm connecting my Sony NEX-F3 to my new Macbook Air for the first time.
When connected via USB the screen on the camera says to 'Check the connected device'. On my old Macbook the camera would autmotically appear on my desktop however this one is not responding at all. I have checked Disk Utility & Finder to see if it has appeared there instead but no luck, any advice?

This is a new computer? Why not take it to an Apple store and have the techs there work on it. I would take the camera and hard drive along so they see exactly what you see.
The service is free. But make an appointment:
http://www.apple.com/retail/geniusbar/

Java code to connect to remote windows machine from local machine

Hi,
I have developed a code to connecting remote windows M/C from local M/C by using SSH2 (ganymed-ssh2-build209.jar) API. when I run the code its giving below error. Can any one please help me how to resolve it. And also please let me know, is there any other way to connect remote windows system using java code.
Exception.
java.io.IOException: There was a problem while talking to <host name>:22
at ch.ethz.ssh2.Connection.connect(Connection.java:642)
at ch.ethz.ssh2.Connection.connect(Connection.java:460)
at Connect.RemoteServer.ConnectWindowsServer.runCommand(ConnectWindowsServer.java:55)
at Connect.RemoteServer.ConnectWindowsServer.main(ConnectWindowsServer.java:27)
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at ch.ethz.ssh2.transport.TransportManager.initialize(TransportManager.java:299)
at ch.ethz.ssh2.Connection.connect(Connection.java:591)
... 3 more
JAVA Code
import ch.ethz.ssh2.Connection;
import ch.ethz.ssh2.Session;
public void setAuthenticationInfo(String hostname, String username,String password) {
       this.host = hostname;
       this.userid = username;
       this.password = password;
       this.recentCommand = "";
       System.out.println("setting authentication info completed for host=" + host );
public void runCommand() throws Exception {
try{
        // Setup ssh session with endpoint
       System.out.println("starting connection with " + host);
       Connection connection = new Connection(host);
       System.out.println("connection object created..");
       connection.connect();
       System.out.println("Connect to connection");
       connection.authenticateWithPassword(userid,password);
       System.out.println(connection.isAuthenticationComplete());
       Session session = connection.openSession();
      System.out.println("connected");
}catch (Exception e) {
e.printStackTrace();
Regards,
Praveen

Hi baftos,
I tried to telnet remote windows machine from my local machine on port 23, its not connected and given error message like "Connect failed".
As your response, if we can telnet to remote windows machine from local machine then we can connect from Java. Is it correct ?.
Can you please help me to resolve this issue. And also please confirm the port (23) is correct, which I was used to connect remote machine from telnet.
Regards,
Praveen

ITunes timeouts when connecting to remote speakers?

When trying to connect to a remote set of speakers (Airport Express/Airtunes), iTunes times out. The set of speakers shows in the menu, iTunes attempts to connect for some time, and then "gives up" - there is no error message. Any suggestions?
iTunes 7.0.2, Airport Express firmware 6.3.
Thanks.

At times, instead of the time out, I get the following error message:
The remote speaker "Test" is not compatible with this version of iTunes
This happens even though iTunes and the Airport Express are up to the latest versions, respectively.
Thanks.

Automaticlly "Show Details" when connecting to Remote Dekstop Machine

Similar Messages

Maybe you are looking for