Automatics PO creation

Hi All :
When am trying to create auto Po with me59 I am getting a error message " No suitable purchase requisitions found"
I have the following things checked :
Auto po checked in purchasing view - Material Master.
Auto po checked in purchasing data  view - vendor master.
despite these i get this message...can some one pls help me...

Hi,
For automatic PO creation check below points.
1) Material Master purchasing view tick automatic PO check box
2) Vendor Master purchasing view tick automatic PO check box.
3) Maintain Source list for Vendor & Material.
4) Maintain Purchase Info Record.
5) Create a Purchase Requisition and select the check box of Source Determination
6) Use T.Code: ME59N & execute for PR for vendor, you will be able to create automatic PO.
Ensure that Purchase Info Record should be there.
If you have more than one vendor then fixes only one vendor in source list.
Regards,
Biju K

Similar Messages

  • Tea Buying and Blending Process mapping onto R/3

    Can anybody help us in finding the right solution for the below mentioned business case for Tea Buying and Blending operation.
    Required clarification
    - Can SAP R/3 manage Tea Auction and Blending Process (very unique for Tea)
    - Are there any third party solution integrated with R/3 available for this business case
    - Is there anybody who has expertise in mapping Tea Buying and Blending Process to R/3
    Background
    Business - Tea Auction and Blending
    Locations - 6 Buying Centers across India
                   - 1 Blending Unit
                   - 10 Packing Units
    Overview
    Teas are sold thru Auction Centers which are moved to the Blending Unit.  Blending Unit does the blending operation and sends the blended tea to the packing units.  Packing units carry out the packing operation and sells them to their distributors.
    Buying Process
    Teas are sold at the Auction center thru Tea Brokers.  Auction centers offer teas / sells tea in a weekly cycle.  Brokers provide the catalogue containing the characterstics of the tea offered in the Auction center with information on the Garden, Grade, quantity offered and the price.  The teas offered by the brokers are tasted prior to deciding upon the lots to buy.  Broker would submit the contract to the buyer post completion of the Auction as per the lots bought.  Contract details are taken as Purchase and these teas are then transported to the Blending Unit.

    I have configured kind of same process for Cheesse and Milk process........i think you can handle the Tea process same way.
    First fi you don't know exactly how much you going to buy or buying is not in your hands but it is on Broker hands then use the Automatice PO creation inBcakground after GR done for this.
    The Pricing oyu can define bu using different condition for grade.....and for blending process can be handle by PP using batch management
    Hope this will help you

  • Automatics Inspection lot Creation?

    Dear SAPIENTS,
    With GRC done inspection lot is created automatically in my scenario. Can anybody let me know where this etting is applied and what more I can do so that in inspection lot autmatically.
    Regards,
    Kaushal Rai

    Yes Kaushal,
    Absolutely Correct.
    - 01: Goods Receipt Insp. for Purchase Order
    It trigger the lot while you post, Gr against Purchase Order.
    - 08: Stock transfer inspection
    It trigger the lot while you transfer stock, Material to material transfer, plant to plant transfer etc.
    - 09: Recurring inspection of batches.
    It trigger the lot while, the next inspection date reaches for the batch.
    - 04: Goods receipt inspection from production.
    It trigger the lot while, the Finish product get received from the Pro. Order.
    - 03: In-process insp. for production order.
    It trigger the lot while, the Pro. Order get released, it is for inprocess inspection.
    - 14: Inspection in Plant Maintenance,
    It trigger the lot while, the maintenance order get released.
    And all these lot are triggered automatically.
    Regards,
    Shyamal
    Etc....

  • Fields in Creation of free goods VBN1

    hi everybody,
    Can somebody expalin in detail the fields in creation of free goods(T-vbn1) like free goods quantity,additional quantity,documnet quantity and calculation rule....
    <b>Please dont copy paste anything form SAP help....I read that one......</b>
    I would appreciate if u explain with your sentence..
    Will reward point if it helps.
    Ghassan

    Hi Gafoor,
    Material
    Material, for which free goods is to be
    granted
    Minimum quantity
    Minimum quantity for which free
    goods can be granted
    From
    Quantity of sales material
    FGQ--- Quantity unit of free goods material
    Free goods -- Quantity of free goods with reference to the quantity and quantity unit of the sales material.
    AQU - Quantity unit of the free goods additional quantity
    Rule - Calculation rule
    Prorata
    whole units
    unit related
    D -- Delivery controlling -  it tells how you can manage the delivery of free goods with respect to the main item ordered.
    Additional material -  Additional material (only available for entry in exclusive free goods)
    Hope it helps. Please reward if helpful.
    Thanks & Regards
    Sadhu Kishore

  • Account determination error - in creation of invoice

    Hello experts,
    i have an error in creation of invoice, after( pgi post goods issue)
    will you please help me out to solve this error.
    thanks & Regards,
    yogesh raina

    hello sir,
    After going throuth this path it shows no gl account in account determination chart
    as below
    Condition type     Message     Description
      ZPR0                                  123     Access KOFI not carried out (initialized field)
    Access     Message     Description
    10     123     Access KOFI not carried out (initialized field)
    20     121     No G/L account found in Account determination type KOFI
    30     123     Access KOFI not carried out (initialized field)
    40     121     No G/L account found in Account determination type KOFI
    50     121     No G/L account found in Account determination type KOFI
    60     123     Access KOFI not carried out (initialized field)

  • Automatic PO creation of free text PR

    Hi!
    We have all our PRs in free text since we are not yet using material master. One of our purchase organization will only order from one vendor and they will enter that vendor and price in the PR. Is it possible to create a PO automatically from that PR without a material or source list?
    Sincerely
    Anders

    Hi
    Thank you very much. Is it possible to restrict the automatic creation to a certain purchase organization?
    If I understand you right:
    1) Create PR with item category D Service
    2) Activate automatic PO creation in ML91
    That will create POs for all PRs created as a service?
    Sincerely
    Anders

  • Issue in creation of plant related data at receiving server using BD10

    Hi all,
    This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
    When i entered into Log-
    1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
    2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
    My segemnt is as follows-
    ZMATMAS05                      matmas05
           E1MARAM                        Master material general data (MARA)
               Z1KLART                        KLART----
    My extention
               E1MARA1                        Additional Fields for E1MARAM
               E1MAKTM                        Master material short texts (MAKT)
               E1MARCM                        Master material C segment (MARC)
                   Z1AUSPM                        E1AUSPMDistribution of Classification:----
    My extention
                   E1MARC1                        Additional Fields for E1MARCM
                   E1MARDM                        Master material warehouse/batch segment (MARD)
                   E1MFHMM                        Master material production resource/tool (MFHM)
                   E1MPGDM                        Master material product group
                   E1MPOPM                        Master material forecast parameter
                   E1MPRWM                        Master material forecast value
                   E1MVEGM                        Master material total consumption
                   E1MVEUM                        Master material unplanned consumption
                   E1MKALM                        Master material production version
               E1MARMM                        Master material units of measure (MARM)
               E1MBEWM                        Master material material valuation (MBEW)
               E1MLGNM                        Master material material data per warehouse number (MLGN)
               E1MVKEM                        Master material sales data (MVKE)
               E1MLANM                        Master material tax classification (MLAN)
               E1MTXHM                        Master material long text header
               E1CUCFG                        CU: Configuration data
           E1UPSLINK                      Reference from Object to Superior UPS
    Thanks.
    Edited by: sanu debu on Apr 27, 2009 7:10 PM

    CREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
    'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
    D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ?

  • Issue in Creation of new Value Field in CO-PA

    Hi,
    I have a query in CO-PA Value Field Linking.
    In my Development Client,
    1. Created a New Value Field (No Transport Request Generated)
    2. Linked to the above to new Conditon type created in SD. (Tranport request was generated) i.e. in Flow of Actual Values->Transfer of Billing Documents->Assign Value Fields
    However then i try creating a new Value Field in my Production Client it throws a message 'You have no authorization to change Fields".
    Is this an issue with authorization or i need to transport the Value field too from Development to Production client.
    Please Advise.
    Thanks in Advance,
    Safi

    Thanks Phaneendra for the response.
    The creation of Value field did not create any tranportation request. Will this too be transported if i transport the Operating Concern.
    Please Advise.
    Thanks,
    Safi

  • Issue in creation of control cycle

    Dear Gurus,
    During creation of control cycle (LPK1), the fields for source information is not appearing in my system.
    I compared control cycle in a different ECC system where source information is appearing.
    How can make the screen appear in my ECC system.
    Please find the screenshots.
    Any pointers will be highly appreciated.
    This thread is further to the threads in Production Planning and LE/WM Forum. I could not resolve the issue with the threads.
    Hope that I will get any pointer in EWM forum.
    http://scn.sap.com/thread/3609441
    http://scn.sap.com/thread/3610822
    With Regards,
    Malay

    Hello Malay,
    Can first contact your ABAPer and ensure the bottom screen is not an Screen Enhancement?
    If it is a some custom development, your ABAPer can help you on the logic behind it.
    Else, Let us know.
    Regards,
    Sathish

  • Issue in Creation of XML file from ABAP data

    Hi,
    I need to create a XML file, but am not facing some issues in creation of XML file, the in the required format.
    The required format is
    -<Header1 1st field= u201CValueu201D 2nd field= u201CValueu201D>
       - <Header2 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 10 fields>
              <Header3 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
              <Header4  1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 4 fields/.>
               <Header5 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
          </Header2>
       </Header1>
    Iu2019m using the call transformation to convert ABAP data to XML file.
    So please anybody can help how to define XML structure in transaction XSLT_TOOL.
    And one more thing, here I need to put the condition to display the Header 3, Header 4, Header 5 values. If there is no record for a particular line item in header 3, 4 & 5, I donu2019t want to display full line items; this is only for Header 3, 4 & 5.
    Please help me in this to get it resolved.

    Hello,
    you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
    If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
    Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
    Regards Otto

  • What are the mandatory fields while creation of material master in differen

    what are the mandatory fields while creation of material master in different views?

    Hi Gopi,
      This is purely depends on the function configuration, which would be done MM consultants.  Kindly check with them.
    thanks & regards
    Kishore Kumar Maram

  • BADI for changing fields during Creation of BP in CRM

    Hello to everyone,
      I need to find a BADI (or other way) to default several fields during BP creation in CRM (4.0 SR1 SP9). The fields I will like to set are TAX TYPE, TAX NUMBER, TAX CATEGORY, etc.. I have found the BADI BUPA_TAX_UPDATE but i dont see any suitable parameters (structures) to changes these fields. Please advice and thanks in advance.

    Hi
    If you use function BUPA_NUMBERS_GET then your BP number will already be buffered and you can avoid a DB read. It may also be that the BP is not in the DB yet anyway.
    You can only pass one GUID in at a time - loop through IT_CHANGED_INSTANCES into a variable of type BU_PARTNER_GUID and pass that into the function as input parameter IV_PARTNER_GUID.
    Cheers
    Dom

  • Error in creation of purchase materials/Goods receipt against PO(FI-MM)

    Hi All,
    While processing FI - MM integration iam facing below errors,request to guide me with same
    1) While creation of purchase materials
    Valuation class 7920 not allowed for material type Raw material Message no. M3180
    Diagnosis
    The combination of values you have entered is not defined in the system.
    Procedure
    Check your entries, and choose a valid value or combination of values with F4.
    I have crossed checked in t code OMSK valuation class 7920 exists.
    2) Goods receipt against PO:
    Number range for trans./event type WE in year 2014 does not exist Message no. M7562
    Diagnosis
    The number range for document number assignment has not been maintained in the year 2014 for the transaction/event type WE.
    Procedure
    Contact your system administrator.
    in second case i have maintained number ranges in OBA7,OMBT,still iam facing with the same issue
    Regards
    Santosh

    Hi Dev,
    Thanks for your reply...yea i have done the ground work before posting this query
    but bitt confused with the post i have come across..
    Problem was occurring due to the wrong updating of raw material instead of finished goods in  MM01 (CREATION OF PURCHASE MM)
    however i have over come my 2nd issue,hopefull will over come my 1st issue also
    Thanks a lot
    Santosh 

  • Reg View creation in Generic

    Hi SDN,
    Im trying to create Generic Data source of View Method. I wanted to create View on BSID ( Closed Customer Invoices) and BSAD ( Open Customer invoices) Tables, But while creating its giving error as "THERE IS NO RELATION BETWEEN THE TABLES"  I want to know how to create Relation Between the tables. Both BSID & BSAD are standard tables, so we cant make any changes.
    Please let me know the procedure to bulid Rlation between the tables.
    Regards
    Sujan

    Hi Siva,
        You have to give relation between these two tables in tab "Table/Join Conditions".
    Creating Views:
    http://help.sap.com/saphelp_webas620/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
    View creation fr generic extraction
    Hope it Helps

  • Automatic TO creation and confirmation for a Material document

    Hi Dear All,
    i am new to MM andWM.
    I have to customization for auto transfer orders and confirmations for material documents what ever created with 101 movement type in Inventory Management. I have down configuration like below.
    SPRO->Logistics Execution->Warehouse Management->Activities->Transfers-> Set Up Autom. TO Creation for TRs / Posting Change Notices
    Double click on ‘control data ‘tab
    Hear for my warehouse I given input like   Auto TO = ‘1’,
                                                                             AddId = ‘select check box’.
    And in ‘Assign control’ tab for 101 movement type I have given input like below.
    Automatic TO = ‘1’.
    TO item can be confirmed immed. = ‘tick checkbox’
    Propose Confirmation = ‘tick checkbox’.
    Foreground/Backgrnd = ‘D’.
    After creating of Material document I am executing report RLAUTA10 in SE38.When I execute this report system showing message like ‘TO processing finished: TR total:   17, TO created:    0, Errors:   17’.
    If I check header details of transfer requirements in LB03, i am not seeing ‘Tick Mark’ in Auto TO Creation field.
    Can any one tell me what the mistake i have down or if i need to do any further configuration. Please help me regarding this concern?
    Thanks in Advance..

    Dear Steve,
    Thanks a lot for giving reply with what I need to do, but I am unable to see result.
    I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
    Click on ‘Assign’ button,
    Press on ‘New entries’
    WhN = ‘900’
    Reference Movement Type = ‘101’
    Movement indicator = ‘B’
    Movement type for Whse Mgmt = ‘101’
    TR create Transfer Requirement = ‘X’
    Immed.TO Creation
    Mail confirmation for background processing = ‘01’.
    GR date = ‘2’

Maybe you are looking for

  • How do I create a greeting card using PSE 9?

    I just purchased and installed PSE 9 for the express purpose of creating personalized greeting cards.  All of the promotional material indicates that I should be able to do this with PSE 9.  However, when I try to create a card, I get a message sayin

  • Two different retrieval results on two spreadsheets for same account

    I am encountering some very bizarre retrieval behavior that I've never seen before. The version is 11.1.1.3. I have a dynamically calculated account, which produces a Contract-to-date value for Net Sales. The formula is: IF(@ISMBR("Jan")) @MDSHIFT("C

  • Catastrophic start

    Wow!!! Talk about the wrong start... I installed CS 5.5 Production Premium on my spanking new iMac 21.5 i7 and I got: - Bridge not working after using Migration Assistant to get the dat from my MBP (uninstalling/reinstalling CS 5.5 did not help)... -

  • Colour code a column in an interactive report

    Hi Could anybody tell me how to colour code a column in an interactive report please. I am using apex version 3.1. Thanks in advance

  • Servletcontext,RequestDispatcher , including jsp files

    I have 2 deployed application (app1 and app2 ) . These are 2 separated applications. Here is the applications structure app1.ear app1/ ----META-INF/ ----app1.war ----app1/ --------WEB-INF/ --------startApp1.jsp URL mapping to app1Root app2.ear app2/