Automatics Startup database in linux server 2.1
Hi,
How can I setup a file that can startup oracle database (9.2.0.4) after the linux server reboot? Can anyone teach me step by step? Thanks
This will be help you:
DB startup & shutdown in 10g DB on Linux
Joel Pérez
Similar Messages
-
Strange problem with automattic start database on linux
HI,
We have Redhat Version 4.(update )
or
Oracle Version 10.1.0.2.0
we followed instruction mention in documentation. ( 10gr2) for automatic startup database when linux system reboot.
after create above script and followed all mention point when we reboot our linux machine it is hang.
Problem>>>
when we reboot our linux system. it HANG !!!! nothing happen..
On enabling swap space [ok]
| cursor blinksir please tell me How can open my linux machine... please anybody give me any type of advice..
thank you very much.
nomini.Hi,
thank your for your help and reply
but i am not able to open my linux machine so how can i update my oracle startup script.
it is hang during booting time ( linux server)
actually what happen.
i made script and just for test i reboot my linux machine.
every thing goes fine but "oracle startup script" run it will hang !!!
i know it is something wrong with my oracle startup script.
but without open my linux box i cann't do anything.
so
i have to first FIX linux problem
then i FIX my oracle script problem
hope you reply and understand my problem
thank you very much
nomini -
Startup and shutdown of Apps and database on R12 with linux server reboot
Hi Guys,
Version : R12
Platform : Linux EL 5
Hi Guys,
I am trying to startup and shutdown the R12 apps and database automatically with Linux server reboots.
Does any one have steps to do this or metalink note:
Thanks in advance,
ZHi,
Please see this thread.
Autostart of Services
Re: Autostart of Services
Regards,
Hussein -
1. if I need to install 11.2.0.3.0 database on Red Hat Enterprise Linux Server v.5.7,
Here I see 11.2.0.1.0 for Linux x86-64 on the following website._
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-linx8664soft-100572.html
Do I download the following and then apply the 11.2.0.3 patch?_
Oracle Database 11g Release 2 (11.2.0.1.0) for Linux x86-64 Linux.x64_11gR2_database_1of2.zip (1,239,269,270 bytes) (cksum - 3152418844) linux.x64_11gR2_database_2of2.zip (1,111,416,131 bytes) (cksum - 3669256139)
2. I need to install 11g and 10g in a same server, I am also looking for a good document.
Thanks.
Jackuser3023234 wrote:
thanks. I will look into it.
how do you install 10.2.0.4 and 11.2.0.3 on the same server?You can install multiple homes in a server.
Every Software dump consists of installer(runInstaller).
Even you can install same Oracle version & release in same server by differentiating Folder names. -
Not able to start database Oracle 11g on Linux Server
Hi
I am using Oracle 11g database. I have successfully installed it on my linux server (Oracle Linux 4).
When i am trying to access database through url "https://localhost.localdomain:1158/em".
Browser is throwing some error that SSL port is not enabled but i feel otherwise.
I tried to diagonse the problem, where i could find that listener port is not getting started.
How to start all the services related to Oracle Database ?
I am newbie for linux as well as database.
Detailed help 'll be appreciated. Thanks a lot.I tried running netca but it gave me following error :
[oracle@localhost bin]$ ./netca
Oracle Net Services Configuration:
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Error: null
Check the trace file for details: /u01/app/oracle/cfgtoollogs/netca/trace_OraDb11g_home1-1002093PM2348.log
Oracle Net Services configuration failed. The exit code is 1
My listener.ora file content is as follows :
[oracle@localhost admin]$ more listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
Following is trace_OraDb11g_home1-1001255PM5356.log content :
[root@localhost cfgtoollogs]# cd netca/
[root@localhost netca]# ls
netca_OraDb11g_home1-1001255PM5356.log trace_OraDb11g_home1-1001255PM5356.log
netca_OraDb11g_home1-1002093PM2348.log trace_OraDb11g_home1-1002093PM2348.log
[root@localhost netca]# more trace_OraDb11g_home1-1001255PM5356.log [main] [ 2010-01-25 17:53:57.009 IST ] [NetCALogger.initTrace:203] Oracle Net Configuration Assistant: 1001255PM5356
[main] [ 2010-01-25 17:53:57.010 IST ] [NetCALogger.initTrace:204] Oracle Home: /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-01-25 17:53:57.011 IST ] [NetCALogger.initTrace:205] Oracle Base: /u01/app/oracle
[main] [ 2010-01-25 17:53:57.011 IST ] [NetCALogger.initTrace:206] Oracle Home
Name: OraDb11g_home1
[main] [ 2010-01-25 17:53:57.049 IST ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[main] [ 2010-01-25 17:53:57.050 IST ] [HAUtils.<init>:188] oui location /u01/app/oraInventory/ContentsXML
[main] [ 2010-01-25 17:53:57.068 IST ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
[main] [ 2010-01-25 17:53:57.068 IST ] [Version.isPre:285] isPre.java: Returning FALSE
[main] [ 2010-01-25 17:53:57.074 IST ] [OCR.loadLibrary:308]
Inside constructor of OCR
[main] [ 2010-01-25 17:53:57.095 IST ] [OCR.loadLibrary:316] Going to load the
ocr library
[main] [ 2010-01-25 17:53:57.096 IST ] [sPlatform.isHybrid:67] osName=Linux osArch=i386 rc=false
[main] [ 2010-01-25 17:53:57.097 IST ] [sPlatform.isHybrid:67] osName=Linux osArch=i386 rc=false
[main] [ 2010-01-25 17:53:57.097 IST ] [Library.load:254] Loading library /u01/app/oracle/product/11.2.0/dbhome_1/lib/libsrvmocr11.so
[main] [ 2010-01-25 17:53:57.099 IST ] [OCR.loadLibrary:318] loaded ocr libraries
[main] [ 2010-01-25 17:53:57.100 IST ] [OCR.isCluster:939] Calling OCRNative for isCluster()
[main] [ 2010-01-25 17:53:57.103 IST ] [OCR.isCluster:943] OCR Result status =
true
[main] [ 2010-01-25 17:53:57.103 IST ] [OCR.isCluster:955] Bolean result = false
[main] [ 2010-01-25 17:53:57.107 IST ] [CmdlineArgs.<init>:110] Initializing variables array...
[main] [ 2010-01-25 17:53:57.107 IST ] [CmdlineArgs.<init>:116] Initializing NetProperties...
[main] [ 2010-01-25 17:53:57.109 IST ] [CmdlineArgs.initArgs:133] Initializing
command line arguments...
[main] [ 2010-01-25 17:53:57.109 IST ] [CmdlineArgs.parseLogParam:290] Parsing
/log argument...
[main] [ 2010-01-25 17:53:57.116 IST ] [CmdlineArgs.parseLogParam:345] Returning Log File = null
[main] [ 2010-01-25 17:53:57.123 IST ] [CmdlineArgs.setOraArgs:236] Setting Oracle arguments...
[main] [ 2010-01-25 17:53:57.124 IST ] [CmdlineArgs.setOraArgs:240] Passed Oracle Home = /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-01-25 17:53:57.124 IST ] [CmdlineArgs.setOraArgs:243] Read Oracle Home = /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-01-25 17:53:57.125 IST ] [CmdlineArgs.setOraArgs:246] Read Oracle Home ID =
[main] [ 2010-01-25 17:53:57.125 IST ] [CmdlineArgs.setOraArgs:249] Read Oracle Home Name = null
[main] [ 2010-01-25 17:53:57.126 IST ] [CmdlineArgs.compareOraHome:183] Comparing Oracle Homes ...
[main] [ 2010-01-25 17:53:57.126 IST ] [CmdlineArgs.compareOraHome:184] Oracle
Home 1 = /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-01-25 17:53:57.127 IST ] [CmdlineArgs.compareOraHome:185] Oracle
Home 2 = /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-01-25 17:53:57.127 IST ] [CmdlineArgs.compareOraHome:224] Returning true
[main] [ 2010-01-25 17:53:57.128 IST ] [InitialSetup.configureOPS:4504] Cluster mode is OFF
[main] [ 2010-01-25 17:53:57.128 IST ] [InitialSetup.<init>:4028] TNS_ADMIN is: null
[main] [ 2010-01-25 17:53:57.133 IST ] [OPSUtil.getHomeVersion:446] Inside getHomeVersion...
[main] [ 2010-01-25 17:53:57.134 IST ] [OPSUtil.getHomeVersion:447] oracleHome
= /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-01-25 17:53:57.135 IST ] [OPSUtil.getHomeVersion:451] oracle.sysman.assistants.util.OracleHome Object = /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-01-25 17:53:57.135 IST ] [OracleHome.getVersion:877] OracleHome.getVersion called. Current Version: null
[main] [ 2010-01-25 17:53:57.138 IST ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[main] [ 2010-01-25 17:53:57.138 IST ] [OracleHome.getVersion:896] Homeinfo /u01/app/oracle/product/11.2.0/dbhome_1,1
[main] [ 2010-01-25 17:53:57.670 IST ] [OracleHome.getVersion:922] OracleHome.server.getVersion Version: 11.2.0.1.0
[main] [ 2010-01-25 17:53:57.670 IST ] [OracleHome.getVersion:943] Current Version From Inventory: 11.2.0.1.0
[main] [ 2010-01-25 17:53:57.670 IST ] [OracleHome.getVersion:948] using sqlplus: /u01/app/oracle/product/11.2.0/dbhome_1/bin/sqlplus
[main] [ 2010-01-25 17:53:57.671 IST ] [OPSUtil.getHomeVersion:452] returning oracleHome Version = 11.2.0.1.0
[main] [ 2010-01-25 17:53:57.671 IST ] [OracleHome.getVersion:877] OracleHome.getVersion called. Current Version: 11.2.0.1.0
[main] [ 2010-01-25 17:53:57.671 IST ] [OracleHome.getVersion:943] Current Version From Inventory: 11.2.0.1.0
[main] [ 2010-01-25 17:53:57.671 IST ] [OracleHome.getVersion:948] using sqlplus: /u01/app/oracle/product/11.2.0/dbhome_1/bin/sqlplus
[main] [ 2010-01-25 17:53:57.672 IST ] [InitialSetup.<init>:4041] Admin location is: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin
[main] [ 2010-01-25 17:53:57.783 IST ] [ConfigureProfile.setProfileParam:136] Setting NAMES.DIRECTORY_PATH: (TNSNAMES, EZCONNECT)
[main] [ 2010-01-25 17:53:57.783 IST ] [ConfigureProfile.setProfileParam:136] Setting ADR_BASE: /u01/app/oracle
[main] [ 2010-01-25 17:53:57.791 IST ] [HAUtils.getHASHome:583] Oracle home from system properties: /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-01-25 17:53:57.792 IST ] [HAUtils.getCRSHome:540] Getting configured CRS/HAS home for Oracle home ( /u01/app/oracle/product/11.2.0/dbhome_1 ) ...[main] [ 2010-01-25 17:53:57.794 IST ] [GETCRSHOMEUtil.<init>:76] Toolname: getcrshome --- Tool location: /u01/app/oracle/product/11.2.0/dbhome_1/srvm/adminTool dependencies: [Ljava.lang.String;@102799c
[main] [ 2010-01-25 17:53:57.794 IST ] [NativeSystem.isCmdScv:471] isCmdScv: cmd=[]
[main] [ 2010-01-25 17:53:57.795 IST ] [RuntimeExec.runCommand:75] Calling Runtime.exec() with the command
[main] [ 2010-01-25 17:53:57.796 IST ] [RuntimeExec.runCommand:77] /bin/sh
[main] [ 2010-01-25 17:53:57.796 IST ] [RuntimeExec.runCommand:77] -c
[main] [ 2010-01-25 17:53:57.796 IST ] [RuntimeExec.runCommand:77] /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome
[Thread-2] [ 2010-01-25 17:53:57.802 IST ] [StreamReader.run:61] In StreamReader.run
[main] [ 2010-01-25 17:53:57.802 IST ] [RuntimeExec.runCommand:142] runCommand: Waiting for the process
[Thread-1] [ 2010-01-25 17:53:57.802 IST ] [StreamReader.run:61] In StreamReader.run
[main] [ 2010-01-25 17:53:57.815 IST ] [RuntimeExec.runCommand:144] runCommand: process returns 1
[main] [ 2010-01-25 17:53:57.816 IST ] [RuntimeExec.runCommand:161] RunTimeExec: output>
[main] [ 2010-01-25 17:53:57.816 IST ] [RuntimeExec.runCommand:170] RunTimeExec: error>
[main] [ 2010-01-25 17:53:57.816 IST ] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[main] [ 2010-01-25 17:53:57.818 IST ] [CmdToolUtil.doexecute:372] nativeSystem.runRemoteExecCmd failed. Command = /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome arguments = [] env = null
[main] [ 2010-01-25 17:53:57.824 IST ] [HAUtils.isHASConfigured:349] Ignoring exception in isHASConfigured: PRCT-1011 : Failed to run "getcrshome"
[main] [ 2010-01-25 17:53:57.824 IST ] [HAUtils.isHASConfigured:350] oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome(ClusterwareInfo.java:423)
oracle.sysman.assistants.util.hasi.HAUtils.getCRSHome(HAUtils.java:544)
oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:604)
oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:345)
oracle.net.ca.InitialSetup.checkHAConfiguration(NetCA.java:4653)
oracle.net.ca.InitialSetup.<init>(NetCA.java:4075)
oracle.net.ca.NetCA.main(NetCA.java:405)
[main] [ 2010-01-25 17:53:57.825 IST ] [InitialSetup.checkHAConfiguration:4691]
HA Server is NOT configured.
[main] [ 2010-01-25 17:53:57.827 IST ] [NetCAResponseFile.<init>:68] Response file initialized: /u01/app/oracle/product/11.2.0/dbhome_1/network/install/netca_typ.rsp
[main] [ 2010-01-25 17:53:57.828 IST ] [NetCAResponseFile.getInstalledComponents:107] Installed components from response file: server, net8, javavm
[main] [ 2010-01-25 17:53:57.828 IST ] [NetCAResponseFile.getVirtualHost:164] Virtual Host from response file: null
[main] [ 2010-01-25 17:53:57.829 IST ] [SilentConfigure.performSilentConfigure:174] Typical profile configuration.
[main] [ 2010-01-25 17:53:57.831 IST ] [ConfigureProfile.setProfileParam:136] Setting NAMES.DIRECTORY_PATH: (TNSNAMES, EZCONNECT)
[main] [ 2010-01-25 17:53:57.831 IST ] [ConfigureProfile.setProfileParam:136] Setting ADR_BASE: /u01/app/oracle
[main] [ 2010-01-25 17:53:57.833 IST ] [SilentConfigure.performSilentConfigure:182] Typical listener configuration.
[main] [ 2010-01-25 17:53:57.843 IST ] [ConfigureListener.isHASConfigured:1425]
Calling SRVM api to check if Oracle Restart is configured ...
[main] [ 2010-01-25 17:53:57.843 IST ] [HAUtils.getHASHome:583] Oracle home from system properties: /u01/app/oracle/product/11.2.0/dbhome_1
[main] [ 2010-01-25 17:53:57.843 IST ] [HAUtils.getCRSHome:540] Getting configured CRS/HAS home for Oracle home ( /u01/app/oracle/product/11.2.0/dbhome_1 ) ...[main] [ 2010-01-25 17:53:57.844 IST ] [GETCRSHOMEUtil.<init>:76] Toolname: getcrshome --- Tool location: /u01/app/oracle/product/11.2.0/dbhome_1/srvm/adminTool dependencies: [Ljava.lang.String;@102799c
[main] [ 2010-01-25 17:53:57.844 IST ] [NativeSystem.isCmdScv:471] isCmdScv: cmd=[]
[main] [ 2010-01-25 17:53:57.844 IST ] [RuntimeExec.runCommand:75] Calling Runtime.exec() with the command
[main] [ 2010-01-25 17:53:57.845 IST ] [RuntimeExec.runCommand:77] /bin/sh
[main] [ 2010-01-25 17:53:57.845 IST ] [RuntimeExec.runCommand:77] -c
[main] [ 2010-01-25 17:53:57.845 IST ] [RuntimeExec.runCommand:77] /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome
[Thread-4] [ 2010-01-25 17:53:57.849 IST ] [StreamReader.run:61] In StreamReader.run
[main] [ 2010-01-25 17:53:57.850 IST ] [RuntimeExec.runCommand:142] runCommand: Waiting for the process
[Thread-3] [ 2010-01-25 17:53:57.850 IST ] [StreamReader.run:61] In StreamReader.run
[main] [ 2010-01-25 17:53:57.863 IST ] [RuntimeExec.runCommand:144] runCommand: process returns 1
[main] [ 2010-01-25 17:53:57.864 IST ] [RuntimeExec.runCommand:161] RunTimeExec: output>
[main] [ 2010-01-25 17:53:57.864 IST ] [RuntimeExec.runCommand:170] RunTimeExec: error>
[main] [ 2010-01-25 17:53:57.864 IST ] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[main] [ 2010-01-25 17:53:57.865 IST ] [CmdToolUtil.doexecute:372] nativeSystem.runRemoteExecCmd failed. Command = /u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome arguments = [] env = null
[main] [ 2010-01-25 17:53:57.865 IST ] [HAUtils.isHASConfigured:349] Ignoring exception in isHASConfigured: PRCT-1011 : Failed to run "getcrshome"
[main] [ 2010-01-25 17:53:57.865 IST ] [HAUtils.isHASConfigured:350] oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome(ClusterwareInfo.java:423)
oracle.sysman.assistants.util.hasi.HAUtils.getCRSHome(HAUtils.java:544)
oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:604)
oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:345)
oracle.net.ca.ConfigureListener.isHASConfigured(ConfigureListener.java:1428)
oracle.net.ca.ConfigureListener.isHASRunning(ConfigureListener.java:1450)
oracle.net.ca.ConfigureListener.validateListenerName(ConfigureListener.java:1697)
oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:169)
oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)
oracle.net.ca.InitialSetup.<init>(NetCA.java:4159)
oracle.net.ca.NetCA.main(NetCA.java:405)
[main] [ 2010-01-25 17:53:57.866 IST ] [ConfigureListener.isHASConfigured:1436]
Is Oracle Restart configured: false
[main] [ 2010-01-25 17:53:57.866 IST ] [ConfigureListener.isHASRunning:1465] Is Oracle Restart running: false
[main] [ 2010-01-25 17:53:57.866 IST ] [ConfigureListener.typicalConfigure:201]
Checking for free port in range: 1521-1540
[main] [ 2010-01-25 17:53:57.867 IST ] [ConfigureListener.isPortFree:1010] Checking if port 1521 is free on local machine...
[main] [ 2010-01-25 17:53:57.867 IST ] [ConfigureListener.isPortFree:1023] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2010-01-25 17:53:57.868 IST ] [ConfigureListener.isPortFree:1025] Local host IP address: localhost.localdomain/127.0.0.1
[main] [ 2010-01-25 17:53:57.868 IST ] [ConfigureListener.isPortFree:1027] Local host name: localhost.localdomain
[main] [ 2010-01-25 17:53:57.868 IST ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/127.0.0.1
[main] [ 2010-01-25 17:53:57.871 IST ] [ConfigureListener.isPortFree:1042] Created ServerSocket successfully.
[main] [ 2010-01-25 17:53:57.871 IST ] [ConfigureListener.isPortFree:1055] Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
[main] [ 2010-01-25 17:53:57.871 IST ] [ConfigureListener.isPortFree:1059] Created ServerSocket successfully.
[main] [ 2010-01-25 17:53:57.872 IST ] [ConfigureListener.isPortFree:1065] Creating ServerSocket on Port:1521
[main] [ 2010-01-25 17:53:57.872 IST ] [ConfigureListener.isPortFree:1068] Created ServerSocket successfully.
[main] [ 2010-01-25 17:53:57.872 IST ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: true
[main] [ 2010-01-25 17:53:57.872 IST ] [ConfigureListener.typicalConfigure:208]
Using port: 1521
[main] [ 2010-01-25 17:53:57.880 IST ] [ConfigureListener.setListenerParam:1779] Setting ADR_BASE_LISTENER: /u01/app/oracle
[main] [ 2010-01-25 17:53:57.882 IST ] [ConfigureListener.isPortFree:1010] Checking if port 1521 is free on local machine...
[main] [ 2010-01-25 17:53:57.882 IST ] [ConfigureListener.isPortFree:1023] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2010-01-25 17:53:57.883 IST ] [ConfigureListener.isPortFree:1025] Local host IP address: localhost.localdomain/127.0.0.1
[main] [ 2010-01-25 17:53:57.883 IST ] [ConfigureListener.isPortFree:1027] Local host name: localhost.localdomain
[main] [ 2010-01-25 17:53:57.883 IST ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/127.0.0.1
[main] [ 2010-01-25 17:53:57.883 IST ] [ConfigureListener.isPortFree:1042] Created ServerSocket successfully.
[main] [ 2010-01-25 17:53:57.884 IST ] [ConfigureListener.isPortFree:1055] Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
[main] [ 2010-01-25 17:53:57.884 IST ] [ConfigureListener.isPortFree:1059] Created ServerSocket successfully.
[main] [ 2010-01-25 17:53:57.884 IST ] [ConfigureListener.isPortFree:1065] Creating ServerSocket on Port:1521
[main] [ 2010-01-25 17:53:57.885 IST ] [ConfigureListener.isPortFree:1068] Created ServerSocket successfully.
[main] [ 2010-01-25 17:53:57.885 IST ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: true
[main] [ 2010-01-25 17:54:00.849 IST ] [SilentConfigure.performSilentConfigure:187] Typical service alias configuration.
Let me know where i have gone wrong ?
Thanks for ur effort.. -
Rman of database under Linux from Windows server
Dear colleagues! I need some help.
I have Oracle database 10.2.0.1, which works under Linux CentOS. I've just set up rman, to backup this database to local linux partition. Now, i want to adjust rman, so it starts from Windows 2003 ( i've already install Oracle 10.2.0.1 client for Wondows 32-bit) server to backup this database to local Windows folder.Could you please answer, is it possible at all?
When i try to perform rman from Windows manually i got this errors:
channel t1: starting piece 1 at 29-APR-10
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on t1 channel at 04/29/2010 03:07:32
ORA-19504: failed to create file "/u02/app/oracle/product/10.2.0/db_1/dbs/c:123
bak"
ORA-27038: created file already exists
Additional information: 11. You can run the backup from windows server 2003 which take the RMAN backup of your linux server. But this backup can only stored into your linux server.
2. You can't store the backup set of linux server into windows server.
Regards
Asif Kabir
-- mark your helpful post as correct/helpful. -
User access logging for my Oracle database 9.2.0.3 and Linux server
Hi Friends,
I would like to have a record of users who had accessed my oracle apps database(9.2.0.3).Please let me know the method.
Also i would like to record the users who had connected to my linux server (using putty) please suggest a method.
Regards,
Arunuser564706 wrote:
I would like to have a record of users who had accessed my oracle apps database(9.2.0.3).Please let me know the method.Perhaps sed (man sed) and records in listener.log, default at OH/network/log/, could help you to find a method.
Also i would like to record the users who had connected to my linux server (using putty) please suggest a method.Take a look in /var/log e.g. wtmp (if such file name exists, and use man command on the file names to learn their usage). Should at least help identify telnet/ssh sessions. -
Startup & shutdown database when reboot server
Dear Oracle guru
We have Digital Unix (True64) v.5.0, and Oracle v.81.5 on top, these days we need to manually startup and shutdown database when we need to maintain its server.
Wondering if you could suggest me for the startup and shutdown scripts to put at /sbin/rc*.d, so that when the server reboots, it will startup database automatically and vice versa for shutting down the server.
Would be very appreciated for your prompt help.The instance is not going to start automatically when you reboot the server.
1.- Shutdown all instances with immediate, transactional or normal option.
2.- stop the listener services
3.- Stop all rest of Oracle services
4.- Reboot the server
5.- start the listener
6.- start the instance
7.- start all rest of Oracle services
Joel Pérez -
Unable to login to sqlplus to do startup on linux server.
Hi all,
Linux server, 10.2.0.4.
Am using the linux server for the last 3 years without any incident then after doing a reboot, errors shown are:
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle sofware directory.
Confirmed that ORACLE_HOME, ORACLE_BASE,etc are already set.
When i do the following:
$cd $ORACLE_HOME/bin
$pwd
shows that in correct directory.
$sqlplus
encountered the above error.
Confirmed that path in ORACLE_HOME and /etc/oratab are identical.
Please advise.
Thanks in advance
Zack
Edited by: Zack.L on Nov 17, 2012 4:39 PM
Edited by: Zack.L on Nov 17, 2012 4:58 PMHello,
Do as below:
export ORACLE_HOME=<path where the database is installed>
export ORACLE_SID=<Database SID>
cd $ORACLE_HOME/bin
./sqlplus or
In the .bash_profile file, set:
ORACLE_HOME=<path where the database is installed>; export ORACLE_HOME
PATH=$PATH:$ORACLE_HOME/binand then execute the .bash_profile file
$ . .bash_profile -
Automatic startup of weblogic admin server of OBIEE11g on linux box
We stopped Admin server from weblogic admin console, now when we tried to start the admin server we are able to start it, but when we close the command line the Admin server stopped automatically, unable to access Console/EM, how to make Admin server to run as a background process on Linux box,
If anyone has any thoughts on what might be going on here I'd greatly appreciate it.Have you tried to nohup the start script? I use this on AIX to start the apps. I don't have a Linux server but I think it would work there, too. At the command line you would type 'nohup start.sh &'. Replace start.sh with the name of your start script. This will run the script in the background and it will keep running even after you log off.
Jerry -
Install Two Database SID on Same Linux Server (AS 4)
Hi
We want to Setup/Install the Two Different SID on a same BOX what are the kernel parameter need to set to run both the instance on same server.
ThanksHi,
you can create two database on some server there is no problem.
and kernal parameter you already set according oracle software requirements during installation time.
regards
Taj -
Hello!
I have Primary, two Physical Standby and one Logical Standby Servers.
$ uname -a
Linux host 2.6.39-200.32.1.el6uek.x86_64 #1 SMP Wed Sep 26 23:11:38 PDT 2012 x86_64 x86_64 x86_64 GNU/Linux
$ cat /etc/issue
Oracle Linux Server release 6.3
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> select * from dba_registry;
COMP_ID COMP_NAME VERSION STATUS MODIFIED NAMESPACE CONTROL SCHEMA PROCEDURE STARTUP PARENT_ID OTHER_SCHEMAS
CATALOG Oracle Database Catalog Views 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS SYS DBMS_REGISTRY_SYS.VALIDATE_CATALOG
CATPROC Oracle Database Packages and Types 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS SYS DBMS_REGISTRY_SYS.VALIDATE_CATPROC APPQOSSYS,DBSNMP,DIP,ORACLE_OCM,OUTLN,SYSTEM
OWM Oracle Workspace Manager 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS WMSYS VALIDATE_OWM
XDB Oracle XML Database 11.2.0.3.0 VALID 30-SEP-2012 02:07:19 SERVER SYS XDB DBMS_REGXDB.VALIDATEXDB
DGMGRL> connect sys/password
Connected.
DGMGRL> show configuration verbose;
Configuration - work_DataGuardConfig
Protection Mode: MaxAvailability
Databases:
primary - Primary database
physical1 - Physical standby database
physical1 - Physical standby database
Properties:
FastStartFailoverThreshold = '30'
OperationTimeout = '30'
FastStartFailoverLagLimit = '30'
CommunicationTimeout = '180'
FastStartFailoverAutoReinstate = 'TRUE'
FastStartFailoverPmyShutdown = 'TRUE'
BystandersFollowRoleChange = 'ALL'
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
$ rpm -qa
kernel-2.6.32-279.5.2.el6.x86_64
system-config-firewall-tui-1.2.27-5.el6.noarch
poppler-data-0.4.0-1.el6.noarch
mesa-dri-drivers-7.11-5.el6.x86_64
ghostscript-fonts-5.50-23.1.el6.noarch
libxml2-python-2.7.6-8.0.1.el6_3.3.x86_64
PyGreSQL-3.8.1-2.el6.x86_64
perl-Time-HiRes-1.9721-127.el6.x86_64
glibc-2.12-1.80.el6_3.5.i686
kernel-2.6.32-279.9.1.el6.x86_64
biosdevname-0.3.11-1.el6.x86_64
device-mapper-1.02.74-10.el6.x86_64
strace-4.5.19-1.11.el6_3.2.x86_64
aic94xx-firmware-30-2.el6.noarch
cpuspeed-1.5-15.el6.x86_64
matahari-network-0.6.0-14.el6.x86_64
rhino-1.7-0.7.r2.2.el6.noarch
elinks-0.12-0.20.pre5.el6.x86_64
libICE-1.0.6-1.el6.x86_64
lvm2-libs-2.02.95-10.el6.x86_64
perl-Crypt-SSLeay-0.57-16.el6.x86_64
libtar-1.2.11-17.el6.x86_64
perl-XML-Twig-3.34-1.el6.noarch
libidn-1.18-2.el6.x86_64
libreport-plugin-logger-2.0.9-5.0.1.el6.x86_64
crda-1.1.1_2010.11.22-1.el6.x86_64
lua-5.1.4-4.1.el6.x86_64
gnutls-2.8.5-4.el6_2.2.x86_64
yp-tools-2.9-12.el6.x86_64
attr-2.4.44-7.el6.x86_64
libtirpc-0.2.1-5.el6.x86_64
file-5.04-13.el6.x86_64
pax-3.4-10.1.el6.x86_64
zip-3.0-1.el6.x86_64
dash-0.5.5.1-3.1.el6.x86_64
latrace-0.5.9-2.el6.x86_64
kexec-tools-2.0.3-3.0.1.el6.x86_64
libasyncns-0.8-1.1.el6.x86_64
libertas-usb8388-firmware-5.110.22.p23-3.1.el6.noarch
nss-softokn-3.12.9-11.el6.x86_64
dbus-python-0.83.0-6.1.el6.x86_64
ql2200-firmware-2.02.08-3.1.el6.noarch
avahi-libs-0.6.25-11.el6.x86_64
nfs-utils-lib-1.1.5-4.el6.x86_64
redhat-indexhtml-6-1.0.2.el6.noarch
boost-regex-1.41.0-11.0.1.el6_1.2.x86_64
rpm-python-4.8.0-27.el6.x86_64
slang-2.2.1-1.el6.x86_64
perl-core-5.10.1-127.el6.x86_64
libselinux-2.0.94-5.3.el6.x86_64
iptables-ipv6-1.4.7-5.1.el6_2.x86_64
audit-libs-2.2-2.el6.x86_64
tcpdump-4.0.0-3.20090921gitdf3cb4.2.el6.x86_64
keyutils-libs-1.4-4.el6.x86_64
crash-6.0.4-2.el6.x86_64
python-setuptools-0.6.10-3.el6.noarch
perl-libs-5.10.1-127.el6.x86_64
lsof-4.82-4.el6.x86_64
perl-Module-Load-Conditional-0.30-127.el6.x86_64
libusb1-1.0.9-0.5.rc1.el6.x86_64
libunistring-0.9.3-5.el6.x86_64
rsync-3.0.6-9.el6.x86_64
libXi-1.3-3.el6.x86_64
perl-IO-Zlib-1.09-127.el6.x86_64
perl-HTML-Tagset-3.20-4.el6.noarch
libXt-1.0.7-1.el6.x86_64
perl-devel-5.10.1-127.el6.x86_64
boost-wave-1.41.0-11.0.1.el6_1.2.x86_64
scli-1.7.3-50.x86_64
libthai-0.1.12-3.el6.x86_64
perl-Compress-Raw-Bzip2-2.020-127.el6.x86_64
mpfr-2.4.1-6.el6.x86_64
foomatic-db-ppds-4.0-7.20091126.el6.noarch
eggdbus-0.6-3.el6.x86_64
libXxf86misc-1.0.2-1.el6.x86_64
libvisual-0.4.0-9.1.el6.x86_64
mysql-libs-5.1.61-4.el6.x86_64
libnih-1.0.1-7.el6.x86_64
oracle-rdbms-server-11gR2-preinstall-1.0-6.el6.x86_64
hal-0.5.14-11.el6.x86_64
libgcrypt-1.4.5-9.el6_2.2.x86_64
boost-test-1.41.0-11.0.1.el6_1.2.x86_64
glibc-common-2.12-1.80.el6_3.5.x86_64
mysql-5.1.61-4.el6.x86_64
ncurses-5.7-3.20090208.el6.x86_64
python-qpid-0.14-11.el6_3.noarch
qpid-qmf-0.14-14.0.1.el6_3.x86_64
matahari-lib-0.6.0-14.el6.x86_64
oracle-logos-60.0.11-9.el6.noarch
perl-Module-Build-0.3500-127.el6.x86_64
libhugetlbfs-utils-2.12-2.el6.x86_64
fontpackages-filesystem-1.41-1.1.el6.noarch
perl-Parse-CPAN-Meta-1.40-127.el6.x86_64
openswan-2.6.32-19.el6_3.x86_64
ncurses-libs-5.7-3.20090208.el6.x86_64
e2fsprogs-libs-1.41.12-12.el6.x86_64
dracut-004-284.0.1.el6_3.1.noarch
ConsoleKit-libs-0.4.1-3.el6.x86_64
udev-147-2.42.el6.x86_64
bind-utils-9.8.2-0.10.rc1.el6_3.4.x86_64
iwl5150-firmware-8.24.2.2-1.el6.noarch
unixODBC-devel-2.2.14-11.el6.x86_64
quota-3.17-16.el6.x86_64
xdg-utils-1.0.2-17.20091016cvs.el6.noarch
matahari-broker-0.6.0-14.el6.x86_64
mingetty-1.08-5.el6.x86_64
samba-common-3.5.10-125.el6.x86_64
usermode-1.102-3.el6.x86_64
abrt-addon-ccpp-2.0.8-6.0.1.el6.x86_64
perl-XML-Dumper-0.81-6.el6.noarch
libdhash-0.4.2-9.el6.x86_64
crontabs-1.10-33.el6.noarch
libevent-1.4.13-4.el6.x86_64
mtr-0.75-5.el6.x86_64
atk-1.28.0-2.el6.x86_64
sgpio-1.2.0.10-5.el6.x86_64
rdate-1.4-16.el6.x86_64
boost-system-1.41.0-11.0.1.el6_1.2.x86_64
latencytop-common-0.5-9.el6.x86_64
libsemanage-2.0.43-4.1.el6.x86_64
libtopology-0.3-7.el6.x86_64
libtheora-1.1.0-2.el6.x86_64
atmel-firmware-1.3-7.el6.noarch
cryptsetup-luks-1.2.0-7.el6.x86_64
python-dmidecode-3.10.13-1.el6.x86_64
ipw2200-firmware-3.1-4.el6.noarch
m4-1.4.13-5.el6.x86_64
bfa-firmware-3.0.2.2-1.el6.noarch
python-iwlib-0.1-1.2.el6.x86_64
libedit-2.11-4.20080712cvs.1.el6.x86_64
smartmontools-5.42-2.el6.x86_64
numpy-1.4.1-9.el6.x86_64
libcom_err-1.41.12-12.el6.x86_64
nmap-5.51-2.0.1.el6.x86_64
python-paramiko-1.7.5-2.1.el6.noarch
grep-2.6.3-3.el6.x86_64
tcsh-6.17-19.el6_2.x86_64
db4-4.7.25-17.el6.x86_64
db4-utils-4.7.25-17.el6.x86_64
perl-Params-Check-0.26-127.el6.x86_64
make-3.81-20.el6.x86_64
expat-2.0.1-11.el6_2.x86_64
SDL-1.2.14-3.el6.x86_64
libXext-1.1-3.el6.x86_64
freetype-2.3.11-6.el6_2.9.x86_64
xorg-x11-drv-ati-firmware-6.14.2-9.el6.noarch
libXft-2.1.13-4.1.el6.x86_64
perl-Term-UI-0.20-127.el6.x86_64
perl-XML-Parser-2.36-7.el6.x86_64
libXxf86vm-1.1.0-1.el6.x86_64
perl-Archive-Extract-0.38-127.el6.x86_64
xz-lzma-compat-4.999.9-0.3.beta.20091007git.el6.x86_64
device-mapper-multipath-libs-0.4.9-56.el6_3.1.x86_64
libss-1.41.12-12.el6.x86_64
cloog-ppl-0.15.7-1.2.el6.x86_64
libfprint-0.1.0-19.pre2.el6.x86_64
module-init-tools-3.9-20.0.1.el6.x86_64
desktop-file-utils-0.15-9.el6.x86_64
xorg-x11-utils-7.4-8.el6.x86_64
kbd-1.15-11.el6.x86_64
augeas-libs-0.9.0-4.el6.x86_64
time-1.7-37.1.el6.x86_64
logwatch-7.3.6-49.el6.noarch
plymouth-0.8.3-24.0.1.el6.x86_64
btparser-0.16-3.el6.x86_64
libhugetlbfs-2.12-2.el6.x86_64
python-2.6.6-29.el6_3.3.x86_64
ipa-python-2.2.0-16.el6.x86_64
dbus-1.2.24-7.0.1.el6_3.x86_64
nss-3.13.5-1.0.1.el6_3.x86_64
glibc-headers-2.12-1.80.el6_3.5.x86_64
kernel-uek-2.6.39-200.29.3.el6uek.x86_64
libuser-0.56.13-5.el6.x86_64
foomatic-db-filesystem-4.0-7.20091126.el6.noarch
qpid-tools-0.14-6.el6_3.noarch
perl-ExtUtils-Embed-1.28-127.el6.x86_64
perl-DBD-MySQL-4.013-3.el6.x86_64
iso-codes-3.16-2.el6.noarch
postgresql-server-8.4.13-1.el6_3.x86_64
mesa-libGLU-7.11-5.el6.x86_64
dstat-0.7.0-1.el6.noarch
poppler-utils-0.12.4-3.el6_0.1.x86_64
libX11-common-1.3-2.el6.noarch
fipscheck-lib-1.2.0-7.el6.x86_64
java-1.6.0-openjdk-1.6.0.0-1.49.1.11.4.el6_3.x86_64
pam_krb5-2.3.11-9.el6.x86_64
libcap-2.16-5.5.el6.x86_64
kernel-uek-2.6.39-200.31.1.el6uek.x86_64
polkit-0.96-2.el6_0.1.x86_64
kernel-uek-firmware-2.6.39-200.32.1.el6uek.noarch
setuptool-1.19.9-3.el6.x86_64
popt-1.13-7.el6.x86_64
kernel-uek-2.6.39-200.32.1.el6uek.x86_64
kernel-devel-2.6.32-279.9.1.el6.x86_64
b43-openfwwf-5.2-4.el6.noarch
libacl-2.2.49-6.el6.x86_64
telnet-0.17-47.el6_3.1.x86_64
iwl1000-firmware-39.31.5.1-1.el6.noarch
yum-plugin-security-1.1.30-14.0.1.el6.noarch
readahead-1.5.6-1.el6.x86_64
libldb-0.9.10-23.el6.x86_64
libsepol-2.0.41-4.el6.x86_64
hicolor-icon-theme-0.11-1.1.el6.noarch
shadow-utils-4.1.4.2-13.el6.x86_64
prelink-0.4.6-3.el6.x86_64
ethtool-2.6.33-0.3.el6.x86_64
elfutils-libelf-0.152-1.el6.x86_64
postgresql-odbc-08.04.0200-1.el6.x86_64
iputils-20071127-16.el6.x86_64
sqlite-3.6.20-1.el6.x86_64
mysql-connector-odbc-5.1.5r1144-7.el6.x86_64
findutils-4.4.2-6.el6.x86_64
libcap-ng-0.6.4-3.el6_0.1.x86_64
cyrus-sasl-2.1.23-13.el6.x86_64
ntpdate-4.2.4p8-2.el6.x86_64
nc-1.84-22.el6.x86_64
cronie-anacron-1.4.4-7.el6.x86_64
plymouth-core-libs-0.8.3-24.0.1.el6.x86_64
setserial-2.17-25.el6.x86_64
rfkill-0.3-4.el6.x86_64
lcms-libs-1.19-1.el6.x86_64
ql2100-firmware-1.19.38-3.1.el6.noarch
cyrus-sasl-gssapi-2.1.23-13.el6.x86_64
newt-python-0.52.11-3.el6.x86_64
rt61pci-firmware-1.2-7.el6.noarch
python-iniparse-0.3.1-2.1.el6.noarch
acl-2.2.49-6.el6.x86_64
ipw2100-firmware-1.3-11.el6.noarch
blktrace-1.0.1-6.el6.x86_64
diffutils-2.8.1-28.el6.x86_64
man-pages-3.22-17.el6.noarch
system-config-firewall-base-1.2.27-5.el6.noarch
boost-date-time-1.41.0-11.0.1.el6_1.2.x86_64
yum-metadata-parser-1.1.2-16.el6.x86_64
rpm-libs-4.8.0-27.el6.x86_64
python-nss-0.11-3.el6.x86_64
unixODBC-2.2.14-11.el6.x86_64
libgcc-4.4.6-4.el6.x86_64
gdbm-1.8.0-36.el6.x86_64
libstdc++-4.4.6-4.el6.x86_64
python-dateutil-1.4.1-6.el6.noarch
pcre-7.8-4.el6.x86_64
python-pycurl-7.19.0-8.el6.x86_64
xmlrpc-c-1.16.24-1209.1840.el6.x86_64
python-gudev-147.1-4.el6_0.1.x86_64
libblkid-2.17.2-12.7.el6.x86_64
perl-version-0.77-127.el6.x86_64
perl-Locale-Maketext-Simple-0.18-127.el6.x86_64
perl-IO-Compress-Base-2.020-127.el6.x86_64
abrt-libs-2.0.8-6.0.1.el6.x86_64
perl-Compress-Raw-Zlib-2.020-127.el6.x86_64
libXau-1.0.5-1.el6.x86_64
perl-DBIx-Simple-1.32-3.el6.noarch
binutils-2.20.51.0.2-5.34.el6.x86_64
libXrender-0.9.5-1.el6.x86_64
perl-IO-Compress-Zlib-2.020-127.el6.x86_64
libXcursor-1.1.10-2.el6.x86_64
perl-Log-Message-Simple-0.04-127.el6.x86_64
libXinerama-1.1-1.el6.x86_64
perl-libwww-perl-5.833-2.el6.noarch
libstdc++-devel-4.4.6-4.el6.x86_64
perl-Test-Harness-3.17-127.el6.x86_64
xorg-x11-font-utils-7.2-11.el6.x86_64
libstdc++-4.4.6-4.el6.i686
perl-IPC-Cmd-0.56-127.el6.x86_64
libXv-1.0.5-1.el6.x86_64
elfutils-0.152-1.el6.x86_64
ncurses-static-5.7-3.20090208.el6.x86_64
perl-Module-Loaded-0.02-127.el6.x86_64
gstreamer-tools-0.10.29-1.0.1.el6.x86_64
device-mapper-multipath-0.4.9-56.el6_3.1.x86_64
keyutils-1.4-4.el6.x86_64
iw-0.9.17-4.el6.x86_64
xorg-x11-xauth-1.0.2-7.1.el6.x86_64
coreutils-8.4-19.el6.x86_64
foomatic-4.0.4-1.el6_1.1.x86_64
gcc-4.4.6-4.el6.x86_64
MAKEDEV-3.24-6.el6.x86_64
libdmx-1.1.0-1.el6.x86_64
authconfig-6.1.12-10.el6.x86_64
ksh-20100621-16.el6.x86_64
tar-1.23-7.el6.x86_64
pm-utils-1.2.5-9.el6.x86_64
ed-1.1-3.3.el6.x86_64
iptables-1.4.7-5.1.el6_2.x86_64
hunspell-1.2.8-16.el6.x86_64
nmon-14g-1.el6.rf.x86_64
jasper-libs-1.900.1-15.el6_1.1.x86_64
initscripts-9.03.31-2.0.1.el6_3.1.x86_64
rhn-client-tools-1.0.0-87.0.2.el6.noarch
qpid-cpp-client-0.14-22.0.1.el6_3.x86_64
libipa_hbac-python-1.8.0-32.el6.x86_64
redhat-lsb-graphics-4.0-3.0.1.el6.x86_64
less-436-10.el6.x86_64
postgresql-8.4.13-1.el6_3.x86_64
cracklib-dicts-2.8.16-4.el6.x86_64
logrotate-3.7.8-15.el6.x86_64
fontconfig-2.8.0-3.el6.x86_64
qpid-cpp-server-0.14-22.0.1.el6_3.x86_64
openldap-2.4.23-26.el6_3.2.x86_64
kernel-uek-firmware-2.6.39-200.29.3.el6uek.noarch
perl-CPANPLUS-0.88-127.el6.x86_64
upstart-0.6.5-12.el6.x86_64
saslwrapper-0.14-1.el6.x86_64
net-tools-1.60-110.el6_2.x86_64
device-mapper-event-libs-1.02.74-10.el6.x86_64
openssh-5.3p1-81.el6.x86_64
matahari-consoles-0.6.0-14.el6.x86_64
matahari-python-0.6.0-14.el6.x86_64
dmraid-events-1.0.0.rc16-11.el6.x86_64
tuned-0.2.19-7.el6.noarch
certmonger-0.56-1.el6.x86_64
libreport-plugin-reportuploader-2.0.9-5.0.1.el6.x86_64
abrt-addon-python-2.0.8-6.0.1.el6.x86_64
libreport-plugin-kerneloops-2.0.9-5.0.1.el6.x86_64
libpath_utils-0.2.1-9.el6.x86_64
gtk2-2.18.9-10.el6.x86_64
vim-common-7.2.411-1.8.el6.x86_64
setup-2.8.14-16.el6.noarch
latencytop-0.5-9.el6.x86_64
autofs-5.0.5-54.el6.x86_64
ipa-client-2.2.0-16.el6.x86_64
abrt-cli-2.0.8-6.0.1.el6.x86_64
lvm2-2.02.95-10.el6.x86_64
openssh-clients-5.3p1-81.el6.x86_64
microcode_ctl-1.17-11.el6.x86_64
libcgroup-0.37-4.el6.x86_64
e2fsprogs-1.41.12-12.el6.x86_64
python-psycopg2-2.0.14-1.el6_2.1.x86_64
rhn-setup-1.0.0-87.0.2.el6.noarch
sos-2.2-29.0.1.el6.noarch
psacct-6.3.2-63.el6_3.3.x86_64
cifs-utils-4.8.1-10.el6.x86_64
perl-CGI-3.51-127.el6.x86_64
libicu-4.2.1-9.1.el6_2.x86_64
mcelog-1.0pre3_20110718-0.14.el6.x86_64
ltrace-0.5-23.45svn.el6.x86_64
efibootmgr-0.5.4-10.el6.x86_64
libvorbis-1.2.3-4.el6_2.1.x86_64
ql2500-firmware-5.06.05-1.el6.noarch
curl-7.19.7-26.el6_2.4.x86_64
selinux-policy-targeted-3.7.19-155.0.1.el6_3.4.noarch
jpackage-utils-1.7.5-3.12.el6.noarch
perl-IO-Compress-Bzip2-2.020-127.el6.x86_64
filesystem-2.4.30-3.el6.x86_64
qpid-cpp-server-ssl-0.14-22.0.1.el6_3.x86_64
pciutils-3.1.4-11.el6.x86_64
xml-common-0.6.3-32.el6.noarch
ghostscript-8.70-14.el6_3.1.x86_64
urw-fonts-2.4-10.el6.noarch
iotop-0.3.2-3.el6.noarch
mailcap-2.1.31-2.el6.noarch
libxslt-1.1.26-2.0.2.el6_3.1.x86_64
wget-1.12-1.4.el6.x86_64
nss-softokn-freebl-3.12.9-11.el6.x86_64
openjpeg-libs-1.3-9.el6_3.x86_64
fipscheck-1.2.0-7.el6.x86_64
libattr-2.4.44-7.el6.x86_64
kernel-uek-firmware-2.6.39-200.31.1.el6uek.noarch
info-4.13a-8.el6.x86_64
bind-libs-9.8.2-0.10.rc1.el6_3.4.x86_64
ConsoleKit-0.4.1-3.el6.x86_64
systemtap-runtime-1.7-5.0.1.el6_3.1.x86_64
iwl6000g2b-firmware-17.168.5.2-1.el6.noarch
kernel-uek-headers-2.6.32-300.32.3.el6uek.x86_64
iwl6050-firmware-41.28.5.1-2.el6.noarch
perf-2.6.32-279.9.1.el6.x86_64
gnupg2-2.0.14-4.el6.x86_64
iwl6000-firmware-9.221.4.1-1.el6.noarch
yum-utils-1.1.30-14.0.1.el6.noarch
bzip2-libs-1.0.5-7.el6_0.x86_64
nss_compat_ossl-0.9.6-1.el6.x86_64
gamin-0.1.10-9.el6.x86_64
jline-0.9.94-0.8.el6.noarch
virt-what-1.11-1.1.el6.x86_64
dbus-glib-0.86-5.el6.x86_64
libSM-1.1.0-7.1.el6.x86_64
sigar-1.6.5-0.4.git58097d9.el6.x86_64
pam_passwdqc-1.0.5-6.el6.x86_64
hunspell-en-0.20090216-7.1.el6.noarch
libogg-1.1.4-2.1.el6.x86_64
postfix-2.6.6-2.2.el6_1.x86_64
libgpg-error-1.7-4.el6.x86_64
libtdb-1.2.1-3.el6.x86_64
ntp-4.2.4p8-2.el6.x86_64
mlocate-0.22.2-3.el6.x86_64
cronie-1.4.4-7.el6.x86_64
cyrus-sasl-plain-2.1.23-13.el6.x86_64
pkgconfig-0.23-9.1.el6.x86_64
oddjob-0.30-5.el6.x86_64
libtevent-0.9.8-8.el6.x86_64
hdparm-9.16-3.4.el6.x86_64
traceroute-2.0.14-2.el6.x86_64
gpm-libs-1.20.6-12.el6.x86_64
dosfstools-3.0.9-4.el6.x86_64
eject-2.1.5-17.el6.x86_64
sysvinit-tools-2.87-4.dsf.el6.x86_64
iwl5000-firmware-8.83.5.1_1-1.el6_1.1.noarch
elfutils-libs-0.152-1.el6.x86_64
iwl4965-firmware-228.61.2.24-2.1.el6.noarch
pyOpenSSL-0.10-2.el6.x86_64
rt73usb-firmware-1.8-7.el6.noarch
boost-thread-1.41.0-11.0.1.el6_1.2.x86_64
python-ldap-2.3.10-1.el6.x86_64
gpg-pubkey-ec551f03-4c2d256a
libfontenc-1.0.5-2.el6.x86_64
pygpgme-0.1-18.20090824bzr68.el6.x86_64
libtool-ltdl-2.2.6-15.5.el6.x86_64
python-lxml-2.2.3-1.1.el6.x86_64
mc-4.7.0.2-3.el6.x86_64
newt-0.52.11-3.el6.x86_64
glib2-2.22.5-7.el6.x86_64
nss-util-3.13.5-1.el6_3.x86_64
pytz-2010h-2.el6.noarch
python-urlgrabber-3.9.1-8.el6.noarch
readline-6.0-4.el6.x86_64
perl-Module-Pluggable-3.90-127.el6.x86_64
boost-python-1.41.0-11.0.1.el6_1.2.x86_64
perl-5.10.1-127.el6.x86_64
libpng-1.2.49-1.el6_2.x86_64
perl-URI-1.40-2.el6.noarch
perl-Log-Message-0.02-127.el6.x86_64
perl-Package-Constants-0.02-127.el6.x86_64
libxcb-1.5-1.el6.x86_64
cpio-2.10-10.el6.x86_64
cairo-1.8.8-3.1.el6.x86_64
libipa_hbac-1.8.0-32.el6.x86_64
libXtst-1.0.99.2-3.el6.x86_64
perl-Archive-Tar-1.58-127.el6.x86_64
perl-HTML-Parser-3.64-2.el6.x86_64
libXdamage-1.1.2-1.el6.x86_64
perl-Module-CoreList-2.18-127.el6.x86_64
libgcc-4.4.6-4.el6.i686
libXfont-1.4.1-2.el6_1.x86_64
libXcomposite-0.4.1-2.el6.x86_64
perl-ExtUtils-ParseXS-2.2003.0-127.el6.x86_64
giflib-4.1.6-3.1.el6.x86_64
perl-ExtUtils-CBuilder-0.27-127.el6.x86_64
ncurses-term-5.7-3.20090208.el6.x86_64
tmpwatch-2.9.16-4.el6.x86_64
grubby-7.0.15-3.0.1.el6.x86_64
oracleasm-support-2.1.5-1.el6.x86_64
coreutils-libs-8.4-19.el6.x86_64
cpp-4.4.6-4.el6.x86_64
hal-libs-0.5.14-11.el6.x86_64
redhat-lsb-printing-4.0-3.0.1.el6.x86_64
gcc-c++-4.4.6-4.el6.x86_64
libutempter-1.1.5-4.1.el6.x86_64
liboil-0.3.16-4.1.el6.x86_64
hwdata-0.233-7.8.el6.noarch
libaio-devel-0.3.107-10.el6.x86_64
boost-iostreams-1.41.0-11.0.1.el6_1.2.x86_64
libssh2-1.2.2-11.el6_3.x86_64
compat-libcap1-1.10-1.x86_64
hal-info-20090716-3.1.el6.noarch
vim-minimal-7.2.411-1.8.el6.x86_64
perl-YAML-Syck-1.07-4.el6.x86_64
libcollection-0.6.0-9.el6.x86_64
glibc-2.12-1.80.el6_3.5.x86_64
boost-serialization-1.41.0-11.0.1.el6_1.2.x86_64
oraclelinux-release-6Server-3.0.2.x86_64
openssl-1.0.0-25.el6_3.1.x86_64
dejavu-sans-fonts-2.30-2.el6.noarch
qt-sqlite-4.6.2-24.el6.x86_64
libxml2-2.7.6-8.0.1.el6_3.3.x86_64
groff-1.18.1.4-21.el6.x86_64
ql23xx-firmware-3.03.27-3.1.el6.noarch
cups-libs-1.4.2-48.el6_3.1.x86_64
cracklib-2.8.16-4.el6.x86_64
pcmciautils-015-4.2.el6.x86_64
man-1.6f-30.el6.x86_64
qpid-cpp-client-ssl-0.14-22.0.1.el6_3.x86_64
nss-tools-3.13.5-1.0.1.el6_3.x86_64
alsa-lib-1.0.22-3.el6.x86_64
hwloc-1.1-0.1.el6.x86_64
perl-Test-Simple-0.92-127.el6.x86_64
phonon-backend-gstreamer-4.6.2-24.el6.x86_64
perl-Time-Piece-1.15-127.el6.x86_64
fprintd-0.1-20.git04fd09cfa.el6.x86_64
python-saslwrapper-0.14-1.el6.x86_64
device-mapper-event-1.02.74-10.el6.x86_64
matahari-agent-lib-0.6.0-14.el6.x86_64
matahari-sysconfig-0.6.0-14.el6.x86_64
matahari-rpc-0.6.0-14.el6.x86_64
dmraid-1.0.0.rc16-11.el6.x86_64
matahari-host-0.6.0-14.el6.x86_64
portreserve-0.0.4-9.el6.x86_64
libreport-2.0.9-5.0.1.el6.x86_64
libreport-plugin-mailx-2.0.9-5.0.1.el6.x86_64
abrt-addon-kerneloops-2.0.8-6.0.1.el6.x86_64
libtasn1-2.3-3.el6_2.1.x86_64
libref_array-0.1.1-9.el6.x86_64
file-libs-5.04-13.el6.x86_64
c-ares-1.7.0-6.el6.x86_64
rpcbind-0.2.0-9.el6.x86_64
busybox-1.15.1-15.el6.x86_64
dhclient-4.1.1-31.P1.0.1.el6_3.1.x86_64
vim-enhanced-7.2.411-1.8.el6.x86_64
samba-client-3.5.10-125.el6.x86_64
openssh-server-5.3p1-81.el6.x86_64
rsyslog-5.8.10-2.el6.x86_64
rng-tools-2-13.el6_2.x86_64
fprintd-pam-0.1-20.git04fd09cfa.el6.x86_64
sudo-1.7.4p5-13.el6_3.x86_64
rhn-check-1.0.0-87.0.2.el6.noarch
m2crypto-0.20.2-9.el6.x86_64
gdb-7.2-56.el6.x86_64
audit-2.2-2.el6.x86_64
oprofile-0.9.7-1.el6.x86_64
valgrind-3.6.0-5.el6.x86_64
irqbalance-0.55-35.0.1.el6_3.x86_64
alsa-utils-1.0.22-3.el6.x86_64
dmidecode-2.11-2.el6_1.x86_64
libgomp-4.4.6-4.el6.x86_64
oraclelinux-release-notes-6Server-7.x86_64
xmlrpc-c-client-1.16.24-1209.1840.el6.x86_64
selinux-policy-3.7.19-155.0.1.el6_3.4.noarch
cas-0.15-1.el6.1.noarch
ca-certificates-2010.63-3.el6_1.5.noarch
perl-CPAN-1.9402-127.el6.x86_64
libsndfile-1.0.20-5.el6.x86_64
cups-1.4.2-48.el6_3.1.x86_64
MySQL-python-1.2.3-0.3.c1.1.el6.x86_64
dejavu-fonts-common-2.30-2.el6.noarch
qt-x11-4.6.2-24.el6.x86_64
krb5-workstation-1.9-33.el6_3.3.x86_64
pulseaudio-libs-0.9.21-14.el6_3.x86_64
dracut-kernel-004-284.0.1.el6_3.1.noarch
util-linux-ng-2.17.2-12.7.el6.x86_64
tzdata-java-2012f-1.el6.noarch
iwl100-firmware-39.31.5.1-1.el6.noarch
kpartx-0.4.9-56.el6_3.1.x86_64
mailx-12.4-6.el6.x86_64
yum-3.2.29-40.0.1.el6.noarch
acpid-1.0.10-2.1.el6.x86_64
cyrus-sasl-lib-2.1.23-13.el6.x86_64
hesiod-3.1.0-19.el6.x86_64
usbutils-003-4.el6.x86_64
tcp_wrappers-libs-7.6-57.el6.x86_64
mdadm-3.2.3-9.el6.x86_64
xz-libs-4.999.9-0.3.beta.20091007git.el6.x86_64
abrt-2.0.8-6.0.1.el6.x86_64
libnl-1.1-14.el6.x86_64
abrt-tui-2.0.8-6.0.1.el6.x86_64
unzip-6.0-1.el6.x86_64
pciutils-libs-3.1.4-11.el6.x86_64
libini_config-0.6.1-9.el6.x86_64
powertop-1.11-6.el6.x86_64
psmisc-22.6-15.el6_0.1.x86_64
sssd-1.8.0-32.el6.x86_64
pixman-0.18.4-1.el6_0.1.x86_64
bridge-utils-1.2-9.el6.x86_64
boost-filesystem-1.41.0-11.0.1.el6_1.2.x86_64
dhcp-common-4.1.1-31.P1.0.1.el6_3.1.x86_64
ustr-1.0.4-9.1.el6.x86_64
xz-4.999.9-0.3.beta.20091007git.el6.x86_64
nfs-utils-1.2.3-26.el6.x86_64
zd1211-firmware-1.4-4.el6.noarch
checkpolicy-2.0.22-1.el6.x86_64
matahari-0.6.0-14.el6.x86_64
rhnlib-2.5.22-12.0.2.el6.noarch
rootfiles-8.1-6.1.el6.noarch
libusb-0.1.12-23.el6.x86_64
parted-2.1-18.el6.x86_64
gettext-0.17-16.el6.x86_64
pth-2.0.7-9.3.el6.x86_64
system-config-network-tui-1.6.0.el6.2-1.0.3.el6.noarch
python-netaddr-0.7.5-4.el6.noarch
bash-4.1.2-9.el6_2.x86_64
man-pages-overrides-6.3.3-1.el6.noarch
nspr-4.9.1-2.el6_3.x86_64
grub-0.97-77.0.1.el6.x86_64
python-crypto-2.0.1-22.el6.x86_64
sed-4.2.1-10.el6.x86_64
sysstat-9.0.4-20.el6.x86_64
rhnsd-4.9.3-2.0.1.el6.x86_64
perl-Pod-Escapes-1.04-127.el6.x86_64
numactl-2.0.7-3.el6.x86_64
boost-1.41.0-11.0.1.el6_1.2.x86_64
libudev-147-2.42.el6.x86_64
crash-trace-command-1.0-4.el6.x86_64
libX11-1.3-2.el6.x86_64
matahari-core-0.6.0-14.el6.x86_64
ql2400-firmware-5.06.05-1.el6.noarch
libXrandr-1.3.0-4.el6.x86_64
perl-Object-Accessor-0.34-127.el6.x86_64
perl-libxml-perl-0.08-10.el6.noarch
nss-softokn-freebl-3.12.9-11.el6.i686
pycairo-1.8.6-2.1.el6.x86_64
perl-File-Fetch-0.26-127.el6.x86_64
ncurses-libs-5.7-3.20090208.el6.i686
gmp-4.3.1-7.el6_2.2.x86_64
flac-1.2.1-6.1.el6.x86_64
ppl-0.10.2-11.el6.x86_64
python-matplotlib-0.99.1.2-1.el6.x86_64
qt-4.6.2-24.el6.x86_64
patch-2.6-6.el6.x86_64
libXxf86dga-1.1.1-1.el6.x86_64
kbd-misc-1.15-11.el6.noarch
procps-3.2.8-23.el6.x86_64
perl-Date-Manip-6.24-1.el6.noarch
libdrm-2.4.25-2.el6.x86_64
libgfortran-4.4.6-4.el6.x86_64
python-libs-2.6.6-29.el6_3.3.x86_64
python-krbV-1.0.90-3.el6.x86_64
gzip-1.3.12-18.el6.x86_64
dbus-libs-1.2.24-7.0.1.el6_3.x86_64
nss-sysinit-3.13.5-1.0.1.el6_3.x86_64
samba-winbind-clients-3.5.10-125.el6.x86_64
glibc-devel-2.12-1.80.el6_3.5.x86_64
plymouth-scripts-0.8.3-24.0.1.el6.x86_64
basesystem-10.0-4.0.1.el6.noarch
mesa-libGL-7.11-5.el6.x86_64
postgresql-docs-8.4.13-1.el6_3.x86_64
poppler-0.12.4-3.el6_0.1.x86_64
ncurses-base-5.7-3.20090208.el6.x86_64
perl-parent-0.221-127.el6.x86_64
kernel-devel-2.6.32-279.5.2.el6.x86_64
oddjob-mkhomedir-0.30-5.el6.x86_64
zlib-1.2.3-27.el6.x86_64
libselinux-utils-2.0.94-5.3.el6.x86_64
kernel-firmware-2.6.32-279.9.1.el6.noarch
device-mapper-libs-1.02.74-10.el6.x86_64
tzdata-2012f-1.el6.noarch
iwl6000g2a-firmware-17.168.5.3-1.el6.noarch
libjpeg-6b-46.el6.x86_64
policycoreutils-2.0.83-19.24.0.1.el6.x86_64
yum-rhn-plugin-0.9.1-43.0.1.el6.noarch
gpgme-1.1.8-3.el6.x86_64
matahari-service-0.6.0-14.el6.x86_64
libaio-0.3.107-10.el6.x86_64
pinfo-0.6.9-12.el6.x86_64
libtalloc-2.0.1-1.1.el6.x86_64
cryptsetup-luks-libs-1.2.0-7.el6.x86_64
boost-program-options-1.41.0-11.0.1.el6_1.2.x86_64
libreport-python-2.0.9-5.0.1.el6.x86_64
perl-XML-Grove-0.46alpha-40.el6.noarch
which-2.19-6.el6.x86_64
libreport-cli-2.0.9-5.0.1.el6.x86_64
wireless-tools-29-5.1.1.el6.x86_64
bzip2-1.0.5-7.el6_0.x86_64
ypbind-1.20.4-29.el6.x86_64
nano-2.0.9-7.el6.x86_64
libgssglue-0.1-11.el6.x86_64
vconfig-1.9-8.1.el6.x86_64
kernel-2.6.32-279.5.1.el6.x86_64
b43-fwcutter-012-2.2.el6.x86_64
libmng-1.0.10-4.1.el6.x86_64
libffi-3.0.5-3.2.el6.x86_64
ivtv-firmware-20080701-20.2.noarch
python-ethtool-0.6-1.el6.x86_64
iwl3945-firmware-15.32.2.9-4.el6.noarch
bc-1.06.95-1.el6.x86_64
words-3.0-17.el6.noarch
mysql-server-5.1.61-4.el6.x86_64
python-kerberos-1.1-6.2.el6.x86_64
rpm-4.8.0-27.el6.x86_64
libpcap-1.0.0-6.20091201git117cb5.el6.x86_64
passwd-0.77-4.el6_2.2.x86_64
chkconfig-1.3.49.3-2.el6.x86_64
cvs-1.11.23-11.el6_2.1.x86_64
libuuid-2.17.2-12.7.el6.x86_64
perl-DBI-1.609-4.el6.x86_64
at-3.1.10-43.el6_2.1.x86_64
pygobject2-2.20.0-5.el6.x86_64
gawk-3.1.7-9.el6.x86_64
libgudev1-147-2.42.el6.x86_64
python-nose-0.10.4-3.1.el6.noarch
perl-Pod-Simple-3.13-127.el6.x86_64
ntsysv-1.3.49.3-2.el6.x86_64
perl-Module-Load-0.16-127.el6.x86_64
trace-cmd-1.0.5-7.el6.x86_64
theora-tools-1.1.0-2.el6.x86_64
libtiff-3.9.4-6.el6_3.x86_64
perl-DBD-SQLite-1.27-3.el6.x86_64
nfs4-acl-tools-0.3.3-6.el6.x86_64
libXfixes-4.0.4-1.el6.x86_64
perl-Compress-Zlib-2.020-127.el6.x86_64
kernel-devel-2.6.32-279.5.1.el6.x86_64
qt3-3.3.8b-30.el6.x86_64
perl-ExtUtils-MakeMaker-6.55-127.el6.x86_64
boost-graph-1.41.0-11.0.1.el6_1.2.x86_64
ncurses-devel-5.7-3.20090208.el6.x86_64
pango-1.28.1-3.el6_0.5.x86_64
perl-Digest-SHA-5.47-127.el6.x86_64
gstreamer-0.10.29-1.0.1.el6.x86_64
libXmu-1.0.5-1.el6.x86_64
foomatic-db-4.0-7.20091126.el6.noarch
pam-1.1.1-10.el6_2.1.x86_64
tcp_wrappers-7.6-57.el6.x86_64
compat-libstdc++-33-3.2.3-69.el6.x86_64
gstreamer-plugins-base-0.10.29-1.el6.x86_64
pinentry-0.7.6-6.el6.x86_64
elfutils-libelf-devel-0.152-1.el6.x86_64
iproute-2.6.32-20.el6.x86_64
boost-signals-1.41.0-11.0.1.el6_1.2.x86_64
krb5-libs-1.9-33.el6_3.3.x86_64
atlas-3.8.4-2.el6.x86_64
cdparanoia-libs-10.2-5.1.el6.x86_64
postgresql-libs-8.4.13-1.el6_3.x86_64
redhat-lsb-4.0-3.0.1.el6.x86_64
sssd-client-1.8.0-32.el6.x86_64
python-qpid-qmf-0.14-14.0.1.el6_3.x86_64
seekwatcher-0.12-5.el6.noarch
libcurl-7.19.7-26.el6_2.4.x86_64
I want to upgrade my OS from official repository on Primary and Standby Servers. And I have a question:
Will I have a problem with my RDBMS after upgrade OS (e.g. statuses in dba_registry will become INVALID)?It's Ok.
Now I have:
$ cat /etc/issue
Oracle Linux Server release 6.4
No any problem. -
Can't change /etc/oratab file or automatic startup problem on linux!!!
Hi friends,
I have installed an Oracle 11.2.0.1 on Oracle Linux Server 5.11(Virtualbox). I have the users grid and oracle11g. Add groups and install grid infrastructure first as a grid user and install database as oracle user as in documentation successfully.
I have following users and groups as
[grid@orcl11g ~]$ id grid
uid=501(grid) gid=502(oinstall) groups=502(oinstall),492(vboxsf),501(grid),503(dba),505(asmdba),506(asmadmin),507(asmoper)
[grid@orcl11g ~]$ id oracle11g
uid=500(oracle11g) gid=502(oinstall) groups=502(oinstall),500(oracle11g),492(vboxsf),503(dba),504(oper),505(asmdba)
When I log on as grid user. I check the followings:
[grid@orcl11g ~]$ crsctl check has
CRS-4638: Oracle High Availability Services is online
[grid@orcl11g ~]$ srvctl status database -d ora11g
Database is running.
[grid@orcl11g ~]$ sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:17:37 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> select status from v$instance;
STATUS
STARTED
When I log as oracle user. I check the followings:
[oracle11g@orcl11g ~]$ sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:21:46 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to an idle instance.
SQL> select status from v$instance;
STATUS
OPEN
Till here everything is OK!!!!
When I edit /etc/oratab file; change N to Y for +ASM and restart the system, then it seems value N is not changed to Y. But changed for database as shown below.
+ASM:/u01/app/grid/product/11.2.0/grid:N # line added by Agent
ora11g:/u01/app/oracle/product/11.2.0/dbhome_1:Y
QUESTIONS!!!!!
1. When I edit /etc/oratab file manually why second row saved (changed N to Y manually) but the first row become unsaved (although changed N to Y) again after restarting the system?
2. After restarting the system database and ASM started automatically, although the line is not changed to Y above (in oratab file) for ASM. What is the reason and how can I change to Y? Or if I have to change the N to Y or not?
3. Is it enough to edit N to Y in oratab file for ASM and database to start ASM and database automatically? I think there will be some other scripts have to be created in /etc/init.d/ directory for automatic startup.
PLEASE HELP ME TO UNDERSTAND THIS PROBLEM CLEARLY!!!!
Thanks!!!
Message was edited by: DBA_84Thanks for reply ZeDBA,
I don't want to prevent auto starting. As 2769577 stated above that
"...You may not need to edit in oratab since it's automatically taken care by HAS in 11g..."
It is meaningful and perhaps it is the exact reason or solution.
Question is that, why I can't edit oratab file manually for ASM row? ' Not need ' and ' can't ' is different!!
# The first and second fields are the system identifier and home
# directory of the database respectively. The third filed indicates
# to the dbstart utility that the database should , "Y", or should not,
# "N", be brought up at system boot time.
# Multiple entries with the same $ORACLE_SID are not allowed.
+ASM:/u01/app/grid/product/11.2.0/grhome_1:N # line added by Agent
ora11g:/u01/app/oracle11g/product/11.2.0/dbhome_1:Y
If we assume the 2769577's answer is exactly correct, reason or solution. Then it means that the row "..
+ASM:/u01/app/grid/product/11.2.0/grhome_1:N
# line added by Agent
in oratab file is meaningless and unnecessary if HAS process enabled and automatically start the ASM.
Please clarify it, If I am wrong?
Thanks!!! -
Drawbacks of Autostart of Database on Linux/Solaris ?
Hi,
i have a script to autostart database on Linux/solaris, its working perfactly,
but i heared that its always preferrable to start database manually on LInux/Solaris.
so what is the drawbacks of Autostart?
another thisng is that how to autostart RAC DB with ASM on Linux/Solaris?
--Sohil KakadiaSohil wrote:
Hi,
i have a script to autostart database on Linux/solaris, its working perfactly,
but i heared that its always preferrable to start database manually on LInux/Solaris.
so what is the drawbacks of Autostart?Those who told that there are any drawbacks can answer on Your question. :)
But one issue can be if storage is in use and disks for some reason are not automounted on reboot then of course database autostart is not prefferable.
If server opsystem is patched (new kernel install, some other changes), then sysadmin could want to just startup server and look is it working, he don't need all those databases to startup. But again it heavely depends what kind of activities sysadmin is performing.
But if everything is mounted on startup, then autostartup of database is just easier for us. for example sudden reboot of server will not disturb us. Databases will be autostarted.
And for high-availability and for all those SLA things - autostartup will reduce downtime. -
Oracle 9I Database, and Mobile Server install history
Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
2. Setup TCP/IP, and IPX/SPX networks
Computer name YGGDRASILL
Host name = YGGDRASILL
Domain = CFR.MSSTATE.EDU
Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
5. Applied NT 4.0 SP6.
6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
7. Installed MDAC 2.6
8. Installed Paint Shop Pro 7 for capturing error screens.
9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
10. Began install of Oracle Database Enterprise Edition with target parameters:
Home directory = D:\Oracle\Ora92
Database directory = D:\Oracle\oradata
Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
Port = 2030
SID = FIA
SYSTEM Password = phwphw
SYS Password = phwphw
SCOTT Password = phwphw
DBSNMP Password = I left this one unassigned or empty.
tnsnames.ora entry for remote TCP/IP connection
a. CD 1 of 3 load
1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
b. CD 1 completed with only one problem, and CD 2 load begins.
c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
HTTP Server URLs
http://7778
https://4443
12. Evaluation of install success begins.
a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
b. All other services start correctly.
c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
16. Attempt to install Oracle Mobile Server Release 5.0.1
a. File locations Screen
Name: = OraLite501
Path: = D:\OraLite501
b. Select Mobile Server at Installation Screen
c. Mobile Server Repository Database Information Screen
Hostname = YGGDRASILL = hostname from tnsnames.ora
Port = 2030 = same as Database port
It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
d. Yes. At Do you want to install the Mobile Server Repository question.
e. At Oracle Protocol Support, I checked the SPX box.
f. Summary, and Install screens function to specifications.
g. Mobile Server Repository Wizard
Database System password:
Password = phwphw
h. Mobile Server Repository Wizard
Schema Name: fiafield
Password : fiafield
i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
1. OraMTSRecoveryService is started
2. OracleOraHome92HTTPService is started
3. OracleOraHome92Listener is started on port
4. OracleServiceFIA is started
5. Apache.exe has the wtgias.dll loaded
6. The Moble Server is not running and it should be if the documentation is correct.
7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443You can find information regarding enabling the iSQLPLUS in the following Oracle manual.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm
Maybe you are looking for
-
Have a iphone 3GS; 2 email accounts. one is for work. It used to work fine until about Feb 2011. Now when i send emails from my work account it only appears in the sent file. Recipients do not get email. IT person looked at it & cannot find why t
-
I am trying to setup APEX 3.1 (fresh installation not upgrade) to work with SSO on Linux. APEX and AP infrastructure are installed on separate servers and APEX is working with mid tier HTTP server. I have followed the steps below and I don’t get any
-
I noticed that, after updating my iOS device from iOS 7 to 8, that when it's finished playing a TV Show episode in the Videos app, it begins playing the next one. I like to fall asleep, listening to a single episode knowing that it'll stop and eventu
-
When I go to use the Red Eye tool (LR_v10) , the pupil size and darken sliders are greyed out and don't function. I can box in the red eye, but since both sliders are locked to the left (minimum) the tool does not work. Has anyone else seen this and
-
Get-ADUser with the -LDAPfilter using a regex
I'm by no means a novice to PowerShell, but for my first year and 1/2 using it the organization I worked for only had 2003 AD functional level, so to do AD stuff I needed to use the Quest Active Directory tools (get-qaduser). Now that I'm working for