Automating a fresh install? Gentoo world file equivalent?
Hi
When using Gentoo I can automate a fresh install because I have my old world file which specifically contains all the programs that I need. Once I give portage my world file I just sit back and it installs everything I want automatically.
What is the best way to recreate this functionality with pacman? The only way I see to do it is to maintain a list of the required software and copy and paste the names onto the command line as:
# pacman -S pacage1 package2 package3 package4 etc.
But maybe I'm missing something?
Well I found this on the wiki. It'll print all installed packages to a file and then can be reinstalled again:
Making List of Installed Packages for Reinstall
pacman -Qqe | grep -v "$(pacman -Qmq)" > pkglist
Reinstall from Package List
pacman -S $(cat pkglist)
Unfortunately, I believe, this will install all packages as primary even dependencies. Haven't tried it yet but I think will break cleaning the system. I don't think "pacman -Rs <package>" will then be able to remove dependencies after reinstall. Am i right about this? If so, is there a way to build a world file that doesn't list dependencies?
Similar Messages
-
[SOLVED] Fresh install read only file system
I just did a fresh install of Arch this morning, and I have been trying to fix it most of the day. I was following the Beginner's Guide in the wiki as close as I could. (There were a couple items that didn't quite match up.) I only edited the files that it told me to, and then just minor edits. I checked out /etc/fstab during the process and noticed that none of my hard drives were present. I didn't think this was normal, so I opened another terminal and grabbed the UUIDs with ls -l /dev/disk/by-uuid/. I have two hard drives, but only sda1 (/) and sda2 (swap) showed up. (sdb1 is the entire second hard drive as /home.) Here is the default fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd0 /media/fl auto user,noauto 0 0
The example documentation indicated that the file should have lines similair to...
/dev/disk/by-uuid/6334340b-87f1-406e-a777-13210ba85887 / ext3 defaults,noatime,nodirtime 0 1
/dev/disk/by-uuid/5ffd6a40-6d72-4710-82af-ae894e557f89 swap swap defaults 0 0
/dev/disk/by-uuid/32935c6c-6b75-4039-6b69-21f8b805e8f8 /home ext3 defaults,noatime,nodirtime 0 2
...but then I found an example while searching around that showed the lines like this:
UUID=6334340b-87f1-406e-a777-13210ba85887 / ext3 defaults,noatime,nodirtime 0 1
UUID=5ffd6a40-6d72-4710-82af-ae894e557f89 swap swap defaults 0 0
UUID=32935c6c-6b75-4039-6b69-21f8b805e8f8 /home ext3 defaults,noatime,nodirtime 0 2
In the first scenario, everything boots like normal, but when I tried to do anything that required writing to disk, the operation failed with a message about the file system being read-only. (I was trying to edit some config files because I couldn't get online.) Mind you, I was working as root the whole time, because I hadn't even gotten to adding a user yet. The only way I could make changes was to boot a live cd, mount, edit, reboot. remember to remove the live cd, reboot again, repeat.
In the second version of fstab, the bootup process kept trying to check the disk for errors. When it was done it wanted to reboot. Then it tried to check again (presumably because it couldn't save the fact that it had already checked).
I am at a loss. I really wish to use Arch Linux. I've been baby-fed for quite a while on Ubuntu, but it always ran slow. Please somebody help me! I am happy to provide more information; just let me know what you need.
Last edited by ravinggenius (2008-07-05 18:33:22)Thank you so much for pointing out that typo! Turns out that is what was wrong. Well plus two of uuids had one typo each....
Also from what I can tell it doesn't matter which format I use for the uuids in fstab. I will use the UUID=xxxxx... version unless somebody can tell me why I shouldn't. -
Windows 8.1 file history - Restore to fresh install
Hi Everyone
I'm trying to understand the benefits of file history. As Windows 8.1 doesn't allow me to create a system image on a schedule anymore, I now have to resort to file history.
Hypothetical Scenario: OS hard disk catches fire, melts down and is not repairable. The good news! I enabled file history of everything I wanted to "save".
How does one import that "history" back into a fresh install on a new disk? Normally on windows 7, an image could just be written back and presto! the job is done
Does that make sense?
Any help would be appreciated. If this isn't entirely possible, I'll end up tossing my OS disk(SSD into a raid 1)Hi,
Since Windows 8.1 took away the scheduling feature in System image backup, so as Henrik_Dahl mentioned in the previous reply, we can manually create a scheduled task.
Here're two reference links
Use Scheduled Tasks to Run PowerShell Commands on Windows
http://blogs.technet.com/b/heyscriptingguy/archive/2011/01/12/use-scheduled-tasks-to-run-powershell-commands-on-windows.aspx
How to schedule a Windows 8.1 System Image backup (step-by-step)
http://pureinfotech.com/2013/10/24/schedule-windows-81-system-image-backup/
"What happens if I restore an image and it finds that the file history on another drive is newer?"
I think either the file history is restored to a previous state or some parts of the file history is useless.
NOTE
This response contains a reference to a third party World Wide Web site. Microsoft is providing
this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information
found on these sites.
Yolanda Zhu
TechNet Community Support -
Hello,
my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
Thanks in advance!
Sincerely,
hoho33"
Can you restore that JSON backup in a new profile?
Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
A JSON backup starts with: {"title":"","id":1,"dateAdded"
A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
You can try if you can restore that JSON backup in a new profile.
Create a new profile as a test to check if your current profile is causing the problems
See Basic Troubleshooting: Make a new profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
firefox support won't to help me to solve my problem!
If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
like HP, Dell , etc. give remote desktop support to their users!
Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
Greetzz -
I had a computer crash and completed a Fresh install of Win7 and restore of all files from Carbonite. I have managed to get LR 5 running in LR. However, I am not sure I have all of my previous catalogs. How can I find my catalogs to assure that I have a complete inventory of all my catalogs.
<moved from Downloading, Installing, Setting Up to Photoshop Lightroom>
-
Fresh install and save time machine files
Is it possible to do a fresh install of the os (i have a new SSD on the way) and get the OS to somehow recognize the time machine files - ie. not delete them and start anew?
I have 2TB drive of backups for the last 5 months.
I'm thinking the best way would be to just clone the last 2 months sans OS files (or whatever fits) to another drive (via my eSata drive dock).
Any thoughts?If you're going to install OSX on the SSD, and leave everything on the internal HD, Time Machine will just back up the SSD, and continue to do "incremental" backups of both the SSD and the internal HD.
But if you also move your data to the SSD, TM will back it up completely, since it's a different drive.
If there isn't enough space on your TM drive, it will start deleting old backups trying to make room; if it gets to the last remaining one and still hasn't enough room, it will fail (leaving the last backup).
You can delete all backups of things from the internal HD, if you want, per #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum). -
Cannot restore files after fresh install of Mountain Lion.
I just did a fresh install of Mountain Lion. I backed up my User Folder manually using an external harddrive. Now that I'm in Mountain Lion, I cannot use the Migration Assistant, because the Drive does not appear, it just keeps spinning saying "Looking for Computers" or whatever it says. (Yes, I chose Time Machine Drive or other Drive from the list) and if I try to just overwrite my user folder by draggin the one I have on my harddrive, it says it can't be modified. So now I'm stuck and can't restore any of my old files and folders. Help!
Restart with the Command and R keys held down and install the OS from there. Click here and scroll down to or search for 'Installing OS X on an external storage device' for more information.
(75096) -
Fresh install of 11.1 and "sqlplus user@instance/password" does not work
new server, windows server 2008, fresh install of 11.1.0.7 with local instance.
can connect to the instance using "sqlplus user/password" since ORACLE_SID is set,
can connect to a 9.2 remote instance using "sqlplus user@remoteinstance/password".
can't connect using "sqlplus user@localinstance/password".
<command>
l:path>set oracle_sid=localinstance
l:path>sqlplus username/password
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Nov 8 13:11:02 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Release 11.1.0.7.0 - Production
SQL> exit
Disconnected from Oracle Database 11g Release 11.1.0.7.0 - Production
l:\path>sqlplus username@localinstance/password
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Nov 8 13:11:21 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
l:\path>
l:\path>sqlplus username@remoteinstance/password
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Nov 8 13:11:45 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
SQL> exit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
l:\path>
</command>
what am i doing wrong?
many thanks in advance,
stephen.=================================
A couple of important points.
First, the listener is a server side only process. It's entire purpose in life is to receive requests for connections to databases and set up those connections. Once the connection is established, the listener is out of the picture. It creates the connection. It doesn't sustain the connection. One listener, with the default name of LISTENER, running from one oracle home, listening on a single port, will serve multiple database instances of multiple versions running from multiple homes. It is an unnecessary complexity to try to have multiple listeners or to name the listener as if it belongs to a particular database. That would be like the telephone company building a separate switchboard for each customer.
Additional notes on the listener: One listener is capable of listening on multiple ports. But please notice that it is the listener using these ports, not the database instance. You can't bind a specific listener port to a specific db instance. Similarly, one listener is capable of listnening on multiple IP addresses (in the case of a server with multiple NICs) But just like the port, you can't bind a specific ip address to a specific db instance.
Second, the tnsnames.ora file is a client side issue. It's purpose is for address resolution - the tns equivalent of the 'hosts' file further down the network stack. The only reason it exists on a host machine is because that machine can also run client processes.
Assume you have the following in your tnsnames.ora:
larry =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = curley)
)Now, when you issue a connect, say like this:
$> sqlplus scott/tiger@larrytns will look in your tnsnames.ora for an entry called 'larry'. Next, tns sends a request to (PORT = 1521) on (HOST = myhost) using (PROTOCOL = TCP), asking for a connection to (SERVICE_NAME = curley).
Where is (HOST = myhost) on the network? When the request gets passed from tns to the next layer in the network stack, the name 'myhost' will get resolved to an IP address, either via a local 'hosts' file, via DNS, or possibly other less used mechanisms. You can also hard-code the ip address (HOST = 123.456.789.101) in the tnsnames.ora.
Next, the request arrives at port 1521 on myhost. Hopefully, there is a listener on myhost configured to listen on port 1521, and that listener knows about SERVICE_NAME = curley. If so, you'll be connected.
What can go wrong?
First, there may not be an entry for 'larry' in your tnsnames. In that case you get "ORA-12154: TNS:could not resolve the connect identifier specified" No need to go looking for a problem on the host, with the listener, etc. If you can't place a telephone call because you don't know the number (can't find your telephone directory (tnsnames.ora) or can't find the party you are looking for listed in it (no entry for larry)) you don't look for problems at the telephone switchboard.
Maybe the entry for larry was found, but myhost couldn't be resolved to an IP address (say there was no entry for myhost in the local hosts file). This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe there was an entry for myserver in the local hosts file, but it specified a bad IP address. This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe the IP was good, but there is no listener running: "ORA-12541: TNS:no listener"
Maybe the IP was good, there is a listener at myhost, but it is listening on a different port. "ORA-12560: TNS:protocol adapter error"
Maybe the IP was good, there is a listener at myhost, it is listening on the specified port, but doesn't know about SERVICE_NAME = curley. "ORA-12514: TNS:listener does not currently know of service requested in connect descriptor"
Third: If the client is on the same machine as the db instance, it is possible to connect without referencing tnsnames and without going through the listener.
Now, when you issue a connect, say like this:
$> sqlplus scott/tigertns will attempt to establish an IPC connection to the db instance. How does it know the name of the instance? It uses the current value of the enviornment variable ORACLE_SID. So...
$> export ORACLE_SID=fred
$> sqlplus scott/tigerIt will attempt to connect to the instance known as "fred". If there is no such instance, it will, of course, fail. Also, if there is no value set for ORACLE_SID, the connect will fail.
check executing instances to get the SID
[oracle@vmlnx01 ~]$ ps -ef|grep pmon|grep -v grep
oracle 4236 1 0 10:30 ? 00:00:00 ora_pmon_vlnxora1set ORACLE_SID appropriately, and connect
[oracle@vmlnx01 ~]$ export ORACLE_SID='vlnxora1
[oracle@vmlnx01 ~]$ sqlplus scott/tiger
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 22 10:42:37 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsNow set ORACLE_SID to a bogus value, and try to connect
SQL> exit
[oracle@vmlnx01 ~]$ export ORACLE_SID=FUBAR
[oracle@vmlnx01 ~]$ sqlplus scott/tiger
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 22 10:42:57 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Enter user-name: Now set ORACLE_SID to null, and try to connect
[oracle@vmlnx01 ~]$ export ORACLE_SID=
[oracle@vmlnx01 ~]$ sqlplus /scott/tiger
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 22 10:43:24 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12162: TNS:net service name is incorrectly specifiedOk, that is how we get from the client connection request to the listener. What about the listener's part of all this?
The listener is very simple. It's job is to listen for connection requests and make the connection (server process) between the client and the database instance. Once that connection is made, the listener is out of the picture. If you were to kill the listener, all existing connections would continue. The listener is configured with the listener.ora file, but if that file doesn't exist, the listener is quite capable of starting up with all default values. One common mistake with the listner configuration is to specify "HOST=localhost" or "HOST=127.0.01". This is a NONROUTABLE ip address. LOCALHOST and ip address 127.0.0.1 always mean "this machine on which I am sitting". So, all computers are known as "localhost" or "127.0.0.1". If you specify this address, the listener will only be capable of receiving requests from the machine on which it is running. If you specified that address in your tnsnames file - on a remote client machine - the request would be routed to the machine on which the requesting client resides. Probably not what you want.
===================================== -
Archlinux (after fresh) Install Script
I want to share my archlinux install script dat i use after do a fresh install, if u have any idea of how to make it better pls post here
#!/bin/bash
# By helmuthdu
#custom repositories #{{{
read -p "Install custom repositories [y][n]: " OPTION
if [ $OPTION = "y" ]; then
echo -e '[ayatana]\nServer = http://repo.ayatana.info/' >> /etc/pacman.conf
fi
#system update #{{{
pacman -Syu
read -p "Reboot your system [y][n]: " OPTION
if [ $OPTION = "y" ]; then
reboot
fi
#create a new user #{{{
read -p "New user name: " USERNAME
useradd -m -g users -G users,audio,lp,optical,storage,video,wheel,games,power,scanner -s /bin/bash $USERNAME
passwd $USERNAME
#set user as sudo #{{{
pacman -S --noconfirm sudo
EDITOR=nano visudo
#install yaourt #{{{
read -p "Install yaourt [y][n]" OPTION
if [ $OPTION = "y" ]; then
pacman -S --noconfirm base-devel yajl
su -l $USERNAME --command="
wget http://aur.archlinux.org/packages/package-query/package-query.tar.gz;
tar zxvf package-query.tar.gz;
cd package-query;
makepkg --noconfirm -si;
cd ..;
rm -fr package-query*
su -l $USERNAME --command="
wget http://aur.archlinux.org/packages/yaourt/yaourt.tar.gz;
tar zxvf yaourt.tar.gz;
cd yaourt;
makepkg --noconfirm -si;
cd ..;
rm -fr yaourt*
fi
#base system #{{{
pacman -S --noconfirm curl bc rsync mlocate bash-completion vim
pacman -S --noconfirm gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters hplip splix cups-pdf
pacman -S --noconfirm ntfs-3g ntfsprogs
pacman -S --noconfirm rssh openssh samba
#configure ssh/samba #{{{
echo -e "sshd: ALL\n# End of file" > /etc/hosts.allow
echo -e "ALL: ALL: DENY\n# End of file" > /etc/hosts.deny
cp /etc/samba/smb.conf.default /etc/samba/smb.conf
#ssh_conf #{{{
sed -i '/ListenAddress/s/^#//' /etc/ssh/sshd_config
sed -i '/SyslogFacility/s/^#//' /etc/ssh/sshd_config
sed -i '/LogLevel/s/^#//' /etc/ssh/sshd_config
sed -i '/LoginGraceTime/s/^#//' /etc/ssh/sshd_config
sed -i '/PermitRootLogin/s/^#//' /etc/ssh/sshd_config
sed -i '/StrictModes/s/^#//' /etc/ssh/sshd_config
sed -i '/RSAAuthentication/s/^#//' /etc/ssh/sshd_config
sed -i '/PubkeyAuthentication/s/^#//' /etc/ssh/sshd_config
sed -i '/IgnoreRhosts/s/^#//' /etc/ssh/sshd_config
sed -i '/PermitEmptyPasswords/s/^#//' /etc/ssh/sshd_config
sed -i '/X11Forwarding/s/^#//' /etc/ssh/sshd_config
sed -i '/X11Forwarding/s/no/yes/' /etc/ssh/sshd_config
sed -i '/X11DisplayOffset/s/^#//' /etc/ssh/sshd_config
sed -i '/X11UseLocalhost/s/^#//' /etc/ssh/sshd_config
sed -i '/PrintMotd/s/^#//' /etc/ssh/sshd_config
sed -i '/PrintMotd/s/yes/no/' /etc/ssh/sshd_config
sed -i '/PrintLastLog/s/^#//' /etc/ssh/sshd_config
sed -i '/TCPKeepAlive/s/^#//' /etc/ssh/sshd_config
pacman -S --noconfirm tar gzip bzip2 unzip unrar p7zip
pacman -S --noconfirm alsa-utils alsa-oss alsa-plugins
sed -i '/MODULES/s/MODULES=(/&fuse/' /etc/rc.conf
#install video driver #{{{
pacman -S --noconfirm xorg-server xorg-xinit xorg-utils xorg-server-utils xorg-xauth xf86-input-evdev xf86-input-synaptics
pacman -S --noconfirm mesa mesa-demos
read -p "Video driver (intel|nvidia|nouveau|virtualbox): " VIDEO
if [ $VIDEO = "intel" ]; then
pacman -S --noconfirm libgl xf86-video-intel
elif [ $VIDEO = "nvidia" ]; then
pacman -S nvidia nvidia-utils
elif [ $VIDEO = "nouveau" ]; then
pacman -S --noconfirm libgl xf86-video-nouveau nouveau-dri
modprobe nouveau
sed -i '/MODULES/s/^[^ ]*\>/& nouveau/' /etc/rc.conf
elif [ $VIDEO = "virtualbox" ]; then
pacman -S --noconfirm virtualbox-archlinux-additions
modprobe -a vboxguest vboxsf vboxvideo
sed -i '/MODULES/s/^[^ ]*\>/& vboxguest vboxsf vboxvideo/' /etc/rc.conf
groupadd vboxsf
gpasswd -a $USERNAME vboxsf
fi
#git access thru a firewall #{{{
#this config help me to bypass the company firewall for git access
TOR=""
read -p "config git access thru a firewall [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm gtk-doc openbsd-netcat vidalia privoxy git"
echo 'forward-socks5 / 127.0.0.1:9050 .' >> /etc/privoxy/config
echo -e '#!/bin/bash\nnc.openbsd -xlocalhost:9050 -X5 $*' >> /usr/bin/proxy-wrapper
chmod +x /usr/bin/proxy-wrapper
echo -e '\nexport GIT_PROXY_COMMAND="/usr/bin/proxy-wrapper"' >> /etc/bash.bashrc
export GIT_PROXY_COMMAND="/usr/bin/proxy-wrapper"
groupadd -g 42 privoxy
useradd -u 42 -g privoxy -s /bin/false -d /etc/privoxy privoxy
pacman -S --noconfirm tor privoxy
rc.d restart tor privoxy
su -l $USERNAME --command="sudo /etc/rc.d/tor restart"
su -l $USERNAME --command="sudo /etc/rc.d/privoxy restart"
TOR="tor privoxy"
fi
#install desktop environment #{{{
read -p "Desktop Environment (Gnome|KDE): " DE
#gnome #{{{
if [ $DE = "gnome" ]; then
#desktop #{{{
pacman -S --noconfirm gnome gnome-extra
pacman -S --noconfirm gamin pulseaudio-gnome gnome-tweak-tool telepathy deja-dup
pacman -S --noconfirm gnome-packagekit gnome-settings-daemon-updates
pacman -Rdd --noconfirm sushi
su -l $USERNAME --command="yaourt -S --noconfirm gloobus-sushi-bzr"
su -l $USERNAME --command="yaourt -S --noconfirm gnome-shell-system-monitor-applet-git gnome-shell-extension-noa11y-git gnome-shell-extension-weather-git gnome-shell-extension-user-theme gnome-shell-extension-workspace-indicator gnome-shell-extension-places-menu gnome-shell-extension-dock gnome-shell-extension-pomodoro gnome-shell-extension-mediaplayer-git"
#aparencia #{{{
su -l $USERNAME --command="yaourt -S --noconfirm faience-icon-theme elementary-icons"
su -l $USERNAME --command="yaourt -S --noconfirm zukitwo-themes light-themes-bzr egtk-bzr"
su -l $USERNAME --command="yaourt -S --noconfirm gnome-shell-theme-faience gnome-shell-theme-nord gnome-shell-theme-eos"
#acessórios #{{{
su -l $USERNAME --command="yaourt -S --noconfirm docky guake gpaste kupfer automounter"
su -l $USERNAME --command="yaourt -S --noconfirm gnome-activity-journal libzeitgeist zeitgeist-datahub zeitgeist-extensions"
su -l $USERNAME --command="yaourt -S --noconfirm gedit-plugins gedit-latex"
su -l $USERNAME --command="yaourt -S --noconfirm nautilus-open-terminal nautilus-terminal nautilus-dropbox gnome-defaults-list"
su -l $USERNAME --command="echo -e '[general]\ndef_term_height=10\ndef_visible=0\n\n[terminal]\nshell=/bin/bash' > ~/.nautilus-terminal"
#escritório #{{{
pacman -S --noconfirm libreoffice-pt-BR libreoffice-{base,calc,draw,impress,math,writer,gnome} libreoffice-extension-presenter-screen libreoffice-extension-pdfimport
pacman -S --noconfirm chmsee
#impressão #{{{
pacman -S --noconfirm system-config-printer-gnome
#graficos #{{{
pacman -S --noconfirm shotwell
#internet #{{{
#networkmanager #{{{
NETWORKMANAGER="network"
read -p "Install networkmanager [y][n]: " OPTION
if [ $OPTION = "y" ]; then
pacman -S --noconfirm networkmanager network-manager-applet
groupadd networkmanager
gpasswd -a $USERNAME networkmanager
NETWORKMANAGER="networkmanager"
fi
#multimedia #{{{
su -l $USERNAME --command="yaourt -S --noconfirm exaile exfalso transmageddon"
#arista #{{{
read -p "Install arista [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm arista-transcoder"
fi
#outros #{{{
pacman -S --noconfirm gksu gvfs-smb xdg-user-dirs
su -l $USERNAME --command="yaourt -S --noconfirm figlet cowsay conky-lua"
LOGINMANAGER=gdm
#KDE #{{{
elif [ $DE = "kde" ]; then
#desktop #{{{
pacman -S --noconfirm kde kde-l10n-pt_br yakuake
pacman -Rcsn --noconfirm kdenetwork-kopete kdemultimedia-kscd kdemultimedia-juk kdemultimedia-dragonplayer
#aparencia #{{{
su -l $USERNAME --command="yaourt -S --noconfirm chakra-gtk-config"
su -l $USERNAME --command="yaourt -S --noconfirm oxygen-gtk qtcurve-gtk2 qtcurve-kde4"
su -l $USERNAME --command="yaourt -S --noconfirm kfaenza-icon-theme"
su -l $USERNAME --command="yaourt -S --noconfirm yakuake-skin-plasma-oxygen-panel plasma-icontasks plasma-theme-caledonia kdm-theme-caledonia ksplash-caledonia bespin-svn"
# impressão #{{{
pacman -S --noconfirm kdeadmin-system-config-printer-kde
# escritório #{{{
pacman -S --noconfirm libreoffice-pt-BR libreoffice-{base,calc,draw,impress,math,writer,kde4} libreoffice-extension-presenter-screen libreoffice-extension-pdfimport
pacman -S --noconfirm kchmviewer
#graficos #{{{
pacman -S --noconfirm digikam kipi-plugins
#internet #{{{
pacman -S --noconfirm choqok
pacman -S --noconfirm telepathy-kde telepathy
#networkmanager #{{{
NETWORKMANAGER="network"
read -p "Install networkmanager [y][n]: " OPTION
if [ $OPTION = "y" ]; then
pacman -S --noconfirm networkmanager kdeplasma-applets-networkmanagement
groupadd networkmanager
gpasswd -a $USERNAME networkmanager
NETWORKMANAGER="networkmanager"
fi
#multimediaa #{{{
pacman -S --noconfirm amarok k3b dvd+rw-tools
su -l $USERNAME --command="yaourt -S --noconfirm vlc phonon-vlc"
su -l $USERNAME --command="yaourt -S --noconfirm minitube musique bangarang"
# sistema #{{{
su -l $USERNAME --command="yaourt -S --noconfirm kdirwatch kcm-wacomtablet quickaccess-plasmoid"
su -l $USERNAME --command="yaourt -S --noconfirm apper-git"
LOGINMANAGER=kdm
fi
#desenvolvimento #{{{
#qtcreator #{{{
read -p "Install qtcreator [y][n]: " OPTION
if [ $OPTION = "y" ]; then
pacman -S --noconfirm qtcreator qt-doc
mkdir -p /home/$USERNAME/.config/Nokia/qtcreator/styles
wget http://angrycoding.googlecode.com/svn/branches/qt-creator-monokai-theme/monokai.xml
mv monokai.xml /home/$USERNAME/.config/Nokia/qtcreator/styles/
chown -R $USERNAME:users /home/$USERNAME/.config
fi
#gvim #{{{
read -p "Install gvim [y][n]: " OPTION
if [ $OPTION = "y" ]; then
pacman -Rdd --noconfirm vim
pacman -S --noconfirm gvim meld splint tidyhtml pyflakes ctags wmctrl
su -l $USERNAME --command="yaourt -S --noconfirm jsl"
sed -i '/Icon/s/gvim/vim/g' /usr/share/applications/gvim.desktop
fi
#acessórios #{{{
read -p "Install wunderlist [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm wunderlist"
fi
#escritório #{{{
pacman -S --noconfirm aspell-pt
su -l $USERNAME --command="yaourt -S --noconfirm hunspell-pt-br"
read -p "Install Latex support [y][n]: " OPTION
if [ $OPTION = "y" ]; then
pacman -S --noconfirm texlive-latexextra texlive-langextra lyx
su -l $USERNAME --command="yaourt -S --noconfirm abntex"
fi
#ferramentas de sistema #{{{
pacman -S --noconfirm htop grsync
pacman -S --noconfirm wine wine_gecko winetricks
su -l $USERNAME --command="yaourt -S --noconfirm toilet figlet cowsay conky-lua-old"
read -p "Install Virtualbox [y][n]: " OPTION
if [ $OPTION = "y" ]; then
pacman -S --noconfirm virtualbox virtualbox-additions
su -l $USERNAME --command="yaourt -S --noconfirm virtualbox-ext-oracle"
modprobe vboxdrv
sed -i '/MODULES/s/^[^ ]*\>/& vboxdrv/' /etc/rc.conf
groupadd vboxusers
gpasswd -a $USERNAME vboxusers
fi
#graficos #{{{
pacman -S --noconfirm gimp inkscape uniconvertor python2-numpy python-lxml
su -l $USERNAME --command="yaourt -S --noconfirm xmind"
su -l $USERNAME --command="yaourt -S --noconfirm gimp-paint-studio gimp-resynth gimpfx-foundry gimp-plugin-pandora gimp-plugin-saveforweb"
#internet #{{{
pacman -S --noconfirm firefox firefox-i18n-pt-br thunderbird thunderbird-i18n-pt-br flashplugin
pacman -Rdd --noconfirm jre7-openjdk jdk7-openjdk
su -l $USERNAME --command="yaourt -S --noconfirm jdk"
su -l $USERNAME --command="yaourt -S --noconfirm google-chrome jdownloader"
LAMP=""
read -p "Install LAMP [y][n]: " OPTION
if [ $OPTION = "y" ]; then
pacman -S --noconfirm apache mysql php php-apache php-mcrypt php-gd
su -l $USERNAME --command="yaourt -S --noconfirm adminer"
rc.d restart httpd mysqld
/usr/bin/mysql_secure_installation
echo -e '\n# adminer configuration\nInclude conf/extra/httpd-adminer.conf' >> /etc/httpd/conf/httpd.conf
echo -e 'application/x-httpd-php php' >> /etc/httpd/conf/mime.types
echo -e '\n# Use for PHP 5.x:\nInclude conf/extra/php5_module.conf\nLoadModule php5_module modules/libphp5.so\nAddHandler php5-script php' >> /etc/httpd/conf/httpd.conf
sed -i 's/DirectoryIndex\ index.html/DirectoryIndex\ index.html\ index.php/g' /etc/httpd/conf/httpd.conf
sed -i 's/public_html/Sites/g' /etc/httpd/conf/extra/httpd-userdir.conf
sed -i '/mcrypt.so/s/^;//' /etc/php/php.ini
sed -i '/mysqli.so/s/^;//' /etc/php/php.ini
sed -i '/mysql.so/s/^;//' /etc/php/php.ini
sed -i '/gd.so/s/^;//' /etc/php/php.ini
su -l $USERNAME --command="mkdir -p ~/Sites"
su -l $USERNAME --command="chmod 775 ~/ && chmod -R 775 ~/Sites"
rc.d restart httpd mysqld
LAMP="httpd mysqld"
fi
#jogos #{{{
read -p "Install Games [y][n]: " OPTION
if [ $OPTION = "y" ]; then
read -p "Install Astromenace [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm astromenace"
fi
read -p "Install Maniadrive [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm maniadrive"
fi
read -p "Install World of Padman [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm worldofpadman"
fi
read -p "Install Wesnoth [y][n]: " OPTION
if [ $OPTION = "y" ]; then
read -p "Install Devel Version [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm wesnoth-devel"
else
pacman -S --noconfirm wesnoth
fi
fi
read -p "Install Simutrans [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm simutrans"
fi
read -p "Install Heroes of Newerth [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm hon"
fi
read -p "Install Tales of Maj'Eyal: Age of Ascendancy [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm tome4"
fi
read -p "Install Numptyphysics [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm numptyphysics-svn"
fi
read -p "Install Counter-Strike 2D [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm counter-strike-2d"
fi
read -p "Install M.A.R.S. [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm mars-shooter"
fi
read -p "Install SuperTuxKart [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm supertuxkart"
fi
read -p "Install OpenTyrian [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm opentyrian-hg"
fi
read -p "Install Warsow [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm warsow"
fi
read -p "Install Doukutsu [y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm doukutsu"
fi
fi
#multimedia #{{{
su -l $USERNAME --command="yaourt -S --noconfirm gstreamer0.10-plugins pulseaudio"
su -l $USERNAME --command="yaourt -S --noconfirm libquicktime libdvdread libdvdnav libdvdcss codecs cdrdao"
su -l $USERNAME --command="yaourt -S --noconfirm xbmc"
read -p "Install midi support[y][n]: " OPTION
if [ $OPTION = "y" ]; then
su -l $USERNAME --command="yaourt -S --noconfirm timidity++ fluidr3"
echo -e 'soundfont /usr/share/soundfonts/fluidr3/FluidR3GM.SF2' >> /etc/timidity++/timidity.cfg
fi
#font #{{{
su -l $USERNAME --command="yaourt -S --noconfirm ttf-ms-fonts ttf-dejavu ttf-liberation ttf-kochi-substitute ttf-google-webfonts ttf-roboto"
read -p "Install patched font configuration [(i)nfinity][(u)buntu][(n)one]: " OPTION
if [ $OPTION = "i" ]; then
pacman -Rdd --noconfirm freetype2
su -l $USERNAME --command="yaourt -S freetype2-infinality"
wget http://www.infinality.net/files/local.conf
mv local.conf /etc/fonts/
elif [ $OPTION = "u" ]; then
pacman -Rdd --noconfirm cairo fontconfig freetype2 libxft
su -l $USERNAME --command="yaourt -S --noconfirm cairo-ubuntu fontconfig-ubuntu freetype2-ubuntu"
fi
# misc #{{{
#configure rc.conf #{{{
sed -i /"DAEMONS"/d /etc/rc.conf
echo "DAEMONS=(syslog-ng crond alsa sshd samba dbus cupsd $TOR $LAMP $LOGINMANAGER $NETWORKMANAGER)" >> /etc/rc.conf
echo "System configuration complete"
#reboot #{{{
read -p "Reboot your system [y][n]: " OPTION
if [ $OPTION = "y" ]; then
reboot
fi
Last edited by helmuthdu (2011-11-17 22:05:09)I appreciate the reply.
My fresh install from the DVD finished and the problem was still occurring. I'm now zeroing the data (one pass), per your suggestion. I'll then do an install of Leopard via Firewire, as I'm unable to start it from the DVD.
I'm curious how a bad install would prevent the computer from starting from a CD/DVD. I'm able to use the install CD/DVD in other computer without any problems, so I don't believe the physical disk is the issue. When I start while holding OPTION, and insert the DVD, it comes up as a boot-able option. Also, the disk image I initially used hasn't had any issues to date.
Thanks again,
Ben -
ITunes will not work on Fresh INstall of Vista x64 SP1
I have a strange issue. I have a Windows Vista x64 with SP1 (Yes the DVD is a production DVD from Microsoft not a slip stream copy.) and I wanted to do a fresh install of Vista with SP1. Reinstalled OS and everything is running great but iTunes. When I start iTunes I get this error message about "mssip32.dll" being damaged or corrupt please reinstall the app. So I looked around good old Google and apple.com. I found several fixes about re-registering a set of dll files. So did them all, no change. Reinstalled Vista from scratch again, no change. So for the heck of it I reinstalled Vista with no SP1 installed and then applied SP1 and it works fine. I reinstalled Vista with SP1 and have been running it for over a week and everything on the system is tested and solid as a rock with no issues. The only program that will not work is iTunes. I have also tried all the way back to version 7.4 and no luck.
Any ideas on this?Read this scary microsoft support article on windows updates?
-
Very slow Mac, compared to when running a fresh install
I was wondering if anyone could help me diagnose the reason for my mac being so slow. (Eg 1.5-3 minute boot up as opposed to 15-20 seconds) And why it takes a long time to load a lot of things. I have restored this from a time machine partition, so I believe something has transferred over incorrectly resulting in this general sluggishness of the system.
I have tried disabling all Startup items, disconnecting all external devices, but to no real success.
Here's the boot log of the system below, where I've noticed it hangs after posting FIPS success.
I was wondering if anyone could point me to any of the things that look suspicious? I've tried, but I haven't been able to find out what is causing it, as I believe the process that is causing this sluggishnesh begins at startup.
30/05/13 4:24:10.000 PM bootlog[0]: BOOT_TIME 1369895050 0
30/05/13 4:24:25.000 PM kernel[0]: PMAP: PCID enabled
30/05/13 4:24:25.000 PM kernel[0]: Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
30/05/13 4:24:25.000 PM kernel[0]: vm_page_bootstrap: 1993882 free pages and 86886 wired pages
30/05/13 4:24:25.000 PM kernel[0]: kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000]
30/05/13 4:24:25.000 PM kernel[0]: zone leak detection enabled
30/05/13 4:24:25.000 PM kernel[0]: standard timeslicing quantum is 10000 us
30/05/13 4:24:25.000 PM kernel[0]: standard background quantum is 2500 us
30/05/13 4:24:25.000 PM kernel[0]: mig_table_max_displ = 74
30/05/13 4:24:11.661 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
30/05/13 4:24:25.000 PM kernel[0]: TSC Deadline Timer supported and enabled
30/05/13 4:24:25.000 PM kernel[0]: corecrypto kext started!
30/05/13 4:24:25.000 PM kernel[0]: Running kernel space in FIPS MODE
30/05/13 4:24:25.000 PM kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
30/05/13 4:24:25.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
30/05/13 4:24:11.664 PM com.apple.launchd[1]: *** Verbose boot, will log to /dev/console. ***
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
30/05/13 4:24:11.667 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
30/05/13 4:24:24.316 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for Sandbox
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for Quarantine
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
30/05/13 4:24:25.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
30/05/13 4:24:25.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
30/05/13 4:24:25.000 PM kernel[0]: MAC Framework successfully initialized
30/05/13 4:24:25.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
30/05/13 4:24:25.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
30/05/13 4:24:25.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1223PFM64 (36 cpu) 0xf80000000, 0x80000000
30/05/13 4:24:25.000 PM kernel[0]: [ PCI configuration begin ]
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
30/05/13 4:24:25.000 PM kernel[0]: console relocated to 0xfc0010000
30/05/13 4:24:25.000 PM kernel[0]: PCI configuration changed (bridge=16 device=3 cardbus=0)
30/05/13 4:24:25.000 PM kernel[0]: [ PCI configuration end, bridges 12 devices 17 ]
30/05/13 4:24:25.000 PM kernel[0]: Thunderbolt runtime power conservation disabled.
30/05/13 4:24:25.000 PM kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
30/05/13 4:24:25.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
30/05/13 4:24:25.000 PM kernel[0]: rooting via boot-uuid from /chosen: 9DADC387-C048-3E67-AFB3-3344605810FC
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
30/05/13 4:24:25.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
30/05/13 4:24:25.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe912174; max speed s800.
30/05/13 4:24:25.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST31000528AS Media/IOGUIDPartitionScheme/Macintosh HD@2
30/05/13 4:24:25.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 1
30/05/13 4:24:25.000 PM kernel[0]: Kernel is LP64
30/05/13 4:24:25.000 PM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
30/05/13 4:24:25.000 PM kernel[0]: USBMSC Identifier (non-unique): MY69FD72DY04KS 0x3f0 0x5a11 0x100
30/05/13 4:24:25.000 PM kernel[0]: ath_get_caps[4038] rx chainmask mismatch actual 7 sc_chainmak 0
30/05/13 4:24:25.000 PM kernel[0]: 1.297317: ath_get_caps[4013] tx chainmask mismatch actual 7 sc_chainmak 0
30/05/13 4:24:25.000 PM kernel[0]: 1.303430: Atheros: mac 448.3 phy 342.14 radio 0.0
30/05/13 4:24:25.000 PM kernel[0]: 1.304325: Use hw queue 0 for WME_AC_BE traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.305204: Use hw queue 1 for WME_AC_BK traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.306047: Use hw queue 2 for WME_AC_VI traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.306882: Use hw queue 3 for WME_AC_VO traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.307725: Use hw queue 8 for CAB traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.308463: Use hw queue 9 for beacons
30/05/13 4:24:25.000 PM kernel[0]: 1.309205: wlan_vap_create : enter. devhandle=0xd9f3e658, opmode=IEEE80211_M_STA, flags=0x1
30/05/13 4:24:25.000 PM kernel[0]: 1.310853: wlan_vap_create : exit. devhandle=0xd9f3e658, opmode=IEEE80211_M_STA, flags=0x1.
30/05/13 4:24:27.000 PM kernel[0]: BCM5701Enet: Ethernet address c8:2a:14:21:ba:13
30/05/13 4:24:27.000 PM kernel[0]: AirPort_AtherosNewma40: Ethernet address e4:ce:8f:5f:b3:53
30/05/13 4:24:27.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
30/05/13 4:24:27.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished():
30/05/13 4:24:33.000 PM kernel[0]: IOBluetoothUSBDFU::probe
30/05/13 4:24:33.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0201
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
30/05/13 4:24:33.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
30/05/13 4:24:33.000 PM kernel[0]: Previous Shutdown Cause: 5
30/05/13 4:24:33.000 PM kernel[0]: AMDBartsGraphicsAccelerator: ** Device in slot: SLOT--1 **
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
30/05/13 4:24:33.317 PM hidd[48]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
30/05/13 4:24:33.863 PM cfprefsd[21]: CFPreferences failed to read preferences data. Errno was 21
30/05/13 4:24:33.864 PM cfprefsd[21]: CFPreferences failed to read preferences data. Errno was 21
30/05/13 4:24:33.971 PM mDNSResponder[39]: mDNSResponder mDNSResponder-379.37 (Dec 16 2012 19:43:09) starting OSXVers 12
30/05/13 4:24:34.000 PM kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6720
30/05/13 4:24:34.000 PM kernel[0]: DSMOS has arrived
30/05/13 4:24:40.810 PM coreservicesd[62]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
30/05/13 4:24:40.836 PM blued[57]: Read the UHE Info
30/05/13 4:24:40.836 PM blued[57]: Read version 2 info. Number of devices:2
30/05/13 4:24:40.836 PM blued[57]: Class of device: 0x2580
30/05/13 4:24:40.836 PM blued[57]: Device name: 'My Mosse-Robinson’s Mouse' length:30
30/05/13 4:24:40.836 PM blued[57]: Finished reading the HID data
30/05/13 4:24:40.836 PM blued[57]: Found a device with PID:0x030d VID:0x05ac
30/05/13 4:24:40.837 PM blued[57]: Class of device: 0x2540
30/05/13 4:24:40.837 PM blued[57]: Device name: 'My Mosse-Robinson’s Keyboard' length:33
30/05/13 4:24:40.837 PM blued[57]: Finished reading the HID data
30/05/13 4:24:40.837 PM blued[57]: Found a device with PID:0x0239 VID:0x05ac
30/05/13 4:24:41.000 PM kernel[0]: macx_swapon SUCCESS
30/05/13 4:24:41.529 PM WindowServer[88]: Server is starting up
30/05/13 4:24:41.531 PM WindowServer[88]: Session 256 retained (2 references)
30/05/13 4:24:41.531 PM WindowServer[88]: Session 256 released (1 references)
30/05/13 4:24:41.538 PM WindowServer[88]: Session 256 retained (2 references)
30/05/13 4:24:41.538 PM WindowServer[88]: init_page_flip: page flip mode is on
30/05/13 4:24:41.538 PM WindowServer[88]: init_resolution: resolution is enabled
30/05/13 4:24:41.694 PM WindowServer[88]: mux_initialize: Couldn't find any matches
30/05/13 4:24:41.706 PM WindowServer[88]: GLCompositor enabled for tile size [256 x 256]
30/05/13 4:24:41.706 PM WindowServer[88]: CGXGLInitMipMap: mip map mode is on
30/05/13 4:24:41.733 PM WindowServer[88]: WSMachineUsesNewStyleMirroring: false
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x042801c0: GL mask 0x1; bounds (0, 0)[2560 x 1440], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a007, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00700000000042801c0
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffff003f0040
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
30/05/13 4:24:41.734 PM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
30/05/13 4:24:41.739 PM WindowServer[88]: Created shield window 0x5 for display 0x042801c0
30/05/13 4:24:41.739 PM WindowServer[88]: Created shield window 0x6 for display 0x003f0040
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x7 for display 0x003f003f
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x8 for display 0x003f003e
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x9 for display 0x003f003d
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x042801c0: GL mask 0x1; bounds (0, 0)[2560 x 1440], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a007, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00700000000042801c0
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (3584, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffff003f0040
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (3587, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
30/05/13 4:24:41.741 PM WindowServer[88]: CGXPerformInitialDisplayConfiguration
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; Vendor 0x610 Model 0xa007 S/N 0 Dimensions 23.50 x 13.23; online enabled built-in, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f0040: MappedDisplay Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.742 PM WindowServer[88]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3587,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.896 PM WindowServer[88]: GLCompositor: GL renderer id 0x01021b05, GL mask 0x0000001f, accelerator 0x0000481b, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
30/05/13 4:24:41.896 PM WindowServer[88]: GLCompositor: GL renderer id 0x01021b05, GL mask 0x0000001f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
30/05/13 4:24:41.911 PM hidd[48]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
30/05/13 4:24:41.911 PM WindowServer[88]: Unable to open IOHIDSystem (e00002bd)
30/05/13 4:24:41.000 PM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
30/05/13 4:24:42.000 PM kernel[0]: [BNBMouseDevice::init][75.19] init is complete
30/05/13 4:24:43.000 PM kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
30/05/13 4:24:43.000 PM kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
30/05/13 4:24:43.000 PM kernel[0]: [AppleMultitouchDevice::start] entered
30/05/13 4:24:43.372 PM com.apple.SecurityServer[15]: Session 100000 created
30/05/13 4:24:43.740 PM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:44.615 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.yVQnGnD to blued.plist, errno was 21.
30/05/13 4:24:44.902 PM WindowServer[88]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042801c0 device: 0x101ed8a10 isBackBuffered: 1 numComp: 3 numDisp: 3
30/05/13 4:24:46.000 PM kernel[0]: NTFS driver 3.10 [Flags: R/W].
30/05/13 4:24:46.000 PM kernel[0]: NTFS volume name BOOTCAMP, version 3.1.
30/05/13 4:24:48.639 PM airportd[95]: _processDLILEvent: en1 attached (down)
30/05/13 4:24:48.000 PM kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff801c6a2000
30/05/13 4:24:48.000 PM kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
30/05/13 4:24:48.765 PM com.apple.SecurityServer[15]: Entering service
30/05/13 4:24:48.821 PM awacsd[58]: Starting awacsd connectivity-78.2 (Dec 16 2012 19:43:29)
30/05/13 4:24:48.822 PM loginwindow[42]: Login Window Application Started
30/05/13 4:24:48.824 PM awacsd[58]: InnerStore CopyAllZones: no info in Dynamic Store
30/05/13 4:24:48.878 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
30/05/13 4:24:48.881 PM loginwindow[42]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:48.886 PM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
30/05/13 4:24:48.906 PM mDNSResponder[39]: D2D_IPC: Loaded
30/05/13 4:24:48.906 PM mDNSResponder[39]: D2DInitialize succeeded
30/05/13 4:24:48.909 PM mDNSResponder[39]: Adding registration domain 167899042.members.btmm.icloud.com.
30/05/13 4:24:48.938 PM awacsd[58]: Configuring lazy AWACS client: 167899042.p04.members.btmm.icloud.com.
30/05/13 4:24:48.974 PM digest-service[114]: label: default
30/05/13 4:24:48.975 PM digest-service[114]: dbname: od:/Local/Default
30/05/13 4:24:48.975 PM digest-service[114]: mkey_file: /var/db/krb5kdc/m-key
30/05/13 4:24:48.975 PM digest-service[114]: acl_file: /var/db/krb5kdc/kadmind.acl
30/05/13 4:24:48.976 PM digest-service[114]: digest-request: uid=0
30/05/13 4:24:48.993 PM rpcsvchost[118]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
30/05/13 4:24:48.995 PM digest-service[114]: digest-request: init request
30/05/13 4:24:48.998 PM digest-service[114]: digest-request: init return domain: BUILTIN server: LOCALHOST
30/05/13 4:24:49.008 PM aosnotifyd[119]: bootstrap_look_up failed (44e)
30/05/13 4:24:49.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
30/05/13 4:24:49.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:49.000 PM kernel[0]: 39.409929: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
30/05/13 4:24:49.000 PM kernel[0]: 39.409936: switchVap from 1 to 1
30/05/13 4:24:49.176 PM kdc[45]: label: default
30/05/13 4:24:49.176 PM kdc[45]: dbname: od:/Local/Default
30/05/13 4:24:49.177 PM kdc[45]: mkey_file: /var/db/krb5kdc/m-key
30/05/13 4:24:49.177 PM kdc[45]: acl_file: /var/db/krb5kdc/kadmind.acl
30/05/13 4:24:49.190 PM kdc[45]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
30/05/13 4:24:49.227 PM kdc[45]: KDC started
30/05/13 4:24:49.389 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
30/05/13 4:24:49.389 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:49.409 PM configd[17]: network changed: DNS*
30/05/13 4:24:49.410 PM configd[17]: setting hostname to "My-iMac.local"
30/05/13 4:24:49.000 PM kernel[0]: 40.066078: performCountryCodeOperation: Not connected, scan in progress[0]
30/05/13 4:24:49.000 PM kernel[0]: 40.068173: setWOW_PARAMETERS:wowevents = 2(1)
30/05/13 4:24:49.809 PM InternetSharing[46]: objc[46]: Object 0x7fcb18d007f0 of class __NSDictionaryM autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
30/05/13 4:24:49.829 PM com.apple.InternetSharing[46]: *** no interface for service
30/05/13 4:24:50.202 PM mds[38]: (Normal) FMW: FMW 0 0
30/05/13 4:24:50.369 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.tGGJbEu to blued.plist, errno was 21.
30/05/13 4:24:50.370 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.fqIWXwi to blued.plist, errno was 21.
30/05/13 4:24:50.652 PM appleeventsd[54]: main: Starting up
30/05/13 4:24:50.660 PM awacsd[58]: KV HTTP 0
30/05/13 4:24:51.219 PM locationd[43]: NOTICE,Location icon should now be in state 0
30/05/13 4:24:51.236 PM sudo[135]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 777 /dev/disk0s4
30/05/13 4:24:51.000 PM kernel[0]: en1: BSSID changed to 94:44:52:e5:e8:6e
30/05/13 4:24:51.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:51.000 PM kernel[0]: AirPort: Link Up on en1
30/05/13 4:24:51.000 PM kernel[0]: en1: BSSID changed to 94:44:52:e5:e8:6e
30/05/13 4:24:51.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:51.000 PM kernel[0]: 42.397428: setWOW_PARAMETERS:wowevents = 2(1)
30/05/13 4:24:51.000 PM kernel[0]: AirPort: RSN handshake complete on en1
30/05/13 4:24:52.001 PM com.apple.usbmuxd[27]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
30/05/13 4:24:52.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,45e1,0000]
30/05/13 4:24:53.916 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:53.932 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:54.533 PM WindowServer[88]: Created shield window 0xa for display 0x042801c0
30/05/13 4:24:54.533 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.534 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.553 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.550 PM launchctl[142]: com.apple.findmymacmessenger: Already loaded
30/05/13 4:24:54.560 PM com.apple.SecurityServer[15]: Session 100003 created
30/05/13 4:24:54.795 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:54.796 PM hidd[48]: CGSShutdownServerConnections: Detaching application from window server
30/05/13 4:24:54.796 PM hidd[48]: CGSDisplayServerShutdown: Detaching display subsystem from window server
30/05/13 4:24:54.808 PM loginwindow[42]: Login Window Started Security Agent
30/05/13 4:24:54.863 PM fseventsd[49]: Logging disabled completely for device:1: /Volumes/Recovery HD
30/05/13 4:24:55.143 PM configd[17]: network changed: v4(en0+:192.168.2.180) DNS+ Proxy+ SMB
30/05/13 4:24:55.280 PM mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
30/05/13 4:24:55.000 PM kernel[0]: Sandbox: sandboxd(157) deny mach-lookup com.apple.coresymbolicationd
30/05/13 4:24:53.798 PM ntpd[112]: proto: precision = 1.000 usec
30/05/13 4:24:53.985 PM com.apple.InternetSharing[46]: InternetSharing: com.apple.InternetSharing.broadcast-0 has been started
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: BCAST is ready [en0, mtu=1500, 2 DNS server(s), 0 DNSv6 server(s)]
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: removed addr=fe80::e6ce:8fff:fe5f:b353 on en1
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: added addr=192.168.3.1 mask=255.255.255.0 on bridge0
30/05/13 4:24:53.000 PM kernel[0]: 45.946953: Invoking setHOST_AP_MODE
30/05/13 4:24:53.000 PM kernel[0]: 45.946957: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
30/05/13 4:24:53.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
30/05/13 4:24:53.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:53.000 PM kernel[0]: 45.960195: setDISASSOCIATE ****STA SYNC DISASSOC SUCCESS
30/05/13 4:24:53.000 PM kernel[0]: 45.960200: switchVap from 1 to 6
30/05/13 4:24:53.000 PM kernel[0]: 45.979212: osif_com_vap_event_handler vap delete event
30/05/13 4:24:53.000 PM kernel[0]: 45.979219: deleteVap ****SYNC VAP DELETE SUCCESS
30/05/13 4:24:53.000 PM kernel[0]: 45.982272: Invoking setRSN_CONF
30/05/13 4:24:53.000 PM kernel[0]: AirPort: Link Up on en1
30/05/13 4:24:53.000 PM kernel[0]: en1: BSSID changed to e4:ce:8f:5f:b3:53
30/05/13 4:24:53.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:53.000 PM kernel[0]: 46.007045: Invoking getKEY_RSC
30/05/13 4:24:53.000 PM kernel[0]: en1: promiscuous mode enable succeeded
30/05/13 4:24:53.000 PM kernel[0]: bridge_attach_protocol: en1
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: com.apple.InternetSharing.broadcast-0 started: [DNS subnet=192.168.3/24 on bridge0]
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: dns[0]: 192.168.2.1
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: dns[1]: 192.168.2.1
30/05/13 4:24:54.095 PM SecurityAgent[153]: This is the first run
30/05/13 4:24:54.095 PM SecurityAgent[153]: MacBuddy was run = 0
30/05/13 4:24:54.122 PM SecurityAgent[153]: User info context values set for My
30/05/13 4:24:54.178 PM com.apple.InternetSharing[46]: com.apple.InternetSharing.broadcast-0 started: [DHCP subnet=192.168.3/24 on bridge0 mtu=1500 <---> en0 mtu=1500] max-mss=1460
30/05/13 4:24:54.178 PM com.apple.InternetSharing[46]: dns[0]: 192.168.3.1
30/05/13 4:24:54.309 PM com.apple.InternetSharing[46]: started "natpmpd"
30/05/13 4:24:54.457 PM loginwindow[42]: Login Window - Returned from Security Agent
30/05/13 4:24:54.459 PM loginwindow[42]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
30/05/13 4:24:54.484 PM loginwindow[42]: USER_PROCESS: 42 console
30/05/13 4:24:55.020 PM named[160]: starting BIND 9.8.3-P1 -c /etc/com.apple.named.proxy.conf -f
30/05/13 4:24:55.020 PM named[160]: built with '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--prefix=/usr' '--sysconfdir=/private/etc' '--localstatedir=/private/var' '--enable-atomic=no' '--with-openssl=yes' '--with-gssapi=yes' '--enable-symtable=none' 'CC=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/u sr/bin/cc' 'CFLAGS=-arch i386 -arch x86_64 -g -Os -pipe -gdwarf-2 ' 'LDFLAGS=-arch i386 -arch x86_64 -framework IOKit -framework CoreFoundation' 'CXX=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/ usr/bin/c++' 'CXXFLAGS=-arch i386 -arch x86_64 -g -Os -pipe '
30/05/13 4:24:55.020 PM named[160]: ----------------------------------------------------
30/05/13 4:24:55.020 PM named[160]: BIND 9 is maintained by Internet Systems Consortium,
30/05/13 4:24:55.020 PM named[160]: Inc. (ISC), a non-profit 501(c)(3) public-benefit
30/05/13 4:24:55.020 PM named[160]: corporation. Support and training for BIND 9 are
30/05/13 4:24:55.020 PM named[160]: available at https://www.isc.org/support
30/05/13 4:24:55.020 PM named[160]: ----------------------------------------------------
30/05/13 4:24:55.587 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:24:55.587 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:55.897 PM com.apple.launchd[1]: (com.apple.xprotectupdater[25]) Exited with code: 252
30/05/13 4:24:55.989 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:56.000 PM kernel[0]: utun_ctl_connect: creating interface utun0
30/05/13 4:24:56.169 PM named[160]: running
30/05/13 4:24:56.170 PM UserEventAgent[143]: cannot find useragent 1102
30/05/13 4:24:56.171 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:56.237 PM com.apple.launchd.peruser.501[164]: (com.apple.gamed) Ignored this key: UserName
30/05/13 4:24:56.237 PM com.apple.launchd.peruser.501[164]: (com.apple.gamed) Ignored this key: GroupName
30/05/13 4:24:56.238 PM com.apple.launchd.peruser.501[164]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
30/05/13 4:24:56.241 PM loginwindow[42]: Connection with distnoted server was invalidated
30/05/13 4:24:56.249 PM distnoted[168]: # distnote server agent absolute time: 48.352954504 civil time: Thu May 30 16:24:56 2013 pid: 168 uid: 501 root: no
30/05/13 4:24:56.526 PM blued[57]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
30/05/13 4:24:56.664 PM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:57.425 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:58.103 PM BezelServices 236.3[42]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
30/05/13 4:24:58.105 PM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=116
30/05/13 4:24:58.122 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:58.278 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:24:58.278 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:58.751 PM com.apple.launchd.peruser.501[164]: (com.apple.afpstat-qfa[211]) Exited with code: 2
30/05/13 4:24:58.835 PM NetworkBrowserAgent[217]: Starting NetworkBrowserAgent
30/05/13 4:24:59.684 PM bootpd[161]: server name My-iMac.local
30/05/13 4:24:59.684 PM bootpd[161]: interface en0: ip 192.168.2.180 mask 255.255.255.0
30/05/13 4:24:59.684 PM bootpd[161]: interface bridge0: ip 192.168.3.1 mask 255.255.255.0
30/05/13 4:25:00.083 PM bootpd[161]: service time 0.000010 seconds
30/05/13 4:25:00.395 PM com.apple.launchd.peruser.501[164]: (com.apple.mrt.uiagent[201]) Exited with code: 255
30/05/13 4:25:00.894 PM fseventsd[49]: check_vol_last_mod_time:XXX failed to get mount time (25; &mount_time == 0x10d075518)
30/05/13 4:25:00.894 PM fseventsd[49]: log dir: /Volumes/External/.fseventsd getting new uuid: 1977A513-201A-4A9B-8A40-AB9A585F82AB
30/05/13 4:25:01.093 PM mDNSResponderHelper[74]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
30/05/13 4:25:02.998 PM apsd[60]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
30/05/13 4:25:03.069 PM configd[17]: inet_set_autoaddr(en1, 1) failed, Resource busy (16)
30/05/13 4:25:03.069 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:03.069 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:04.125 PM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
30/05/13 4:25:04.171 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:04.171 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:04.584 PM GrowlLauncher[195]: Launching Growl at URL: file://localhost/Applications/Growl.app/Contents/MacOS/Growl
30/05/13 4:25:06.238 PM com.apple.SecurityServer[15]: Session 100005 created
30/05/13 4:25:06.302 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:06.302 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:10.699 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:10.699 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:10.886 PM bootpd[161]: DHCP REQUEST [bridge0]: 1,d8:a2:5e:53:4d:68 <My-iPad>
30/05/13 4:25:11.000 PM kernel[0]: 62.766797: osif_connect_event: sta: d8:a2:5e:53:4d:68 arrive message posted
30/05/13 4:25:11.000 PM kernel[0]: 62.783435: Invoking setSTA_AUTHORIZE
30/05/13 4:25:12.321 PM bootpd[161]: ACK sent My-iPad 192.168.3.6 pktsize 300
30/05/13 4:25:12.321 PM bootpd[161]: service time 1.602424 seconds
30/05/13 4:25:12.321 PM bootpd[161]: DHCP REQUEST [bridge0]: 1,d8:a2:5e:53:4d:68 <My-iPad>
30/05/13 4:25:13.253 PM bootpd[161]: ACK sent My-iPad 192.168.3.6 pktsize 300
30/05/13 4:25:13.253 PM bootpd[161]: service time 0.932620 seconds
30/05/13 4:25:14.366 PM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationBirth to notificationID=115
30/05/13 4:25:14.818 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 5
30/05/13 4:25:14.818 PM com.apple.usbmuxd[27]: _BrowseReplyReceivedCallback (thread 0x7fff778fd180): Error doing DNSServiceResolve(): -65540
30/05/13 4:25:15.492 PM Growl[250]: Setup timer, this should only happen once
30/05/13 4:25:15.493 PM Growl[250]: Next image check no earlier than 24 hours from 2013-05-29 13:59:00 +0000
30/05/13 4:25:15.584 PM Image Capture Extension[253]: Another instance of 'Image Capture Extension' is already running! This instance is exiting.
30/05/13 4:25:15.585 PM com.apple.launchd.peruser.501[164]: ([0x0-0x17017].com.apple.ImageCaptureExtension2[253]) Exited with code: 1
30/05/13 4:25:15.585 PM HPScanner[230]: ERROR: Image Capture Extension went away!
30/05/13 4:25:16.174 PM com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[147]) Exit timeout elapsed (20 seconds). Killing
30/05/13 4:25:18.125 PM WindowServer[88]: disable_update_likely_unbalanced: UI updates still disabled by application "SystemUIServer" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
30/05/13 4:25:19.620 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:19.620 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:20.909 PM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 17.78 seconds (server forcibly re-enabled them after 1.00 seconds)
30/05/13 4:25:21.195 PM BetterSnapTool[237]: kCGErrorIllegalArgument: CGSUnregisterWindowWithSystemStatusBar: Invalid window
30/05/13 4:25:21.225 PM configd[17]: set_arp_linklocal(en1) SIOCARPIPLL 1 failed, Resource busy
30/05/13 4:25:21.228 PM configd[17]: network changed: v4(en0:192.168.2.180, en1+:169.254.217.249) DNS Proxy SMB
30/05/13 4:25:21.664 PM UserEventAgent[11]: Captive: Online (HostAP mode)
30/05/13 4:25:21.667 PM configd[17]: network changed: v4(en0:192.168.2.180, en1) DNS Proxy SMB
30/05/13 4:25:21.859 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:25:22.003 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:25:25.674 PM mDNSResponderHelper[259]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
30/05/13 4:25:26.937 PM named[160]: client 192.168.3.6#63922: error sending response: host unreachable
30/05/13 4:25:29.935 PM named[160]: client 192.168.3.6#63922: error sending response: host unreachable
30/05/13 4:25:31.946 PM com.apple.SecurityServer[15]: Session 100009 created
30/05/13 4:25:32.086 PM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
30/05/13 4:25:32.268 PM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.18 seconds (server forcibly re-enabled them after 1.00 seconds)1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists. -
Fresh Install of iTunes and some Questions
I just did a fresh install, set up home sharing, and did an iCloud match so my whole library is in the cloud. I have my library file stored locally but my music files on my NAS. Here are my questions:
1. I want to install iTunes on my wifes computer, set up iTunes match for her, set up shaing. She will have a "shell" setup where notjing is stored as she is sharing with me and accessing the cloud. Do I need to set up that computer under my user id even though she has her own? I figure thats the only way to get her to iTunes match that I have?
2. How do I do this all? Meaning, I will have a local library file for her but I need to point her laptop to the NAS with the files on them. If I change her iTunes media file to that location on the NAS and check keep organized, will it screw up the files I have there? I noticed when I did that on my PC it moved some fles around and I had to reassociate lost files to songs. Took hurs. Would iTunes have done that automatically for me somehow? Should I not check the keep organized for her as she will not be adding music anyhow? What is the harm either way?
3. How do I see my pictures on my ATV unit? I thought I used to be able to but don't see an "app" on the ATV to do so, just photo stream which I do not want to do. I thought I used to be able to access the pictures stored on my NAS? Am I dreaming this or did it go away? My NAS is an iTunes server and I swear I used to be able to access them from my ATV? All I see on my ATV under my library is music, podcasts and movies.
4. I have my NAS sharing (home sharing) and I can see it on my laptop with iTuenes installed. When I click on it I see only music, no movies or anything else, why is that and is it something to do with home sharing? But, like I said I can see thse movies on ATV under my library. I can also see my playlists on the shared on my laptop but nothing is in them. I think that may be becuase they were set up under another library and now that I hve a new library file, they don't carry over? I don't see any of said playlists in the sttandard iTunes interface under playlists, just under the shared however like I said, no files in them. Also, the share comes and goes as in sometimes I see it sometimes I don't however I am always able to access the NAS from iTunes. Strange, may be network issues?
5. Along those same lines, sometimes the home share just up and dissapears from ATV. Maybe a network issue?
6. Lastly, I just did my first backup/sync to my new laptop with the frsh install of iTunes on it. It gave me some sort of message that I can only sync to one computer and do I want to overwrite or whatever? I said no and it did nothing. After that, I did a back-up however it seemed to go fast and I also did a sunc. The sync was three steps, used to be like six and I did not notice any of my new apps being copied to it. Something is wrong here but not sure what to do, ideas?
Thanks in advance for any and all help.#4 - make sure you are sharing out all the items in your itunes library (music, movies, etc)
you should be able to do that under preferences
you may also want to check if it is pointing to the correct library
#1 - home sharing should work on the LAN w/out the need for signing in; the shared libraries should appear under "shared" in the left sidebar of itunes
think this may resolve the issues you have on #2 as well
#2 - itunes doesnt seem like it's built for that, but if you have any experience, i'd like to hear it. this seems why home sharing is the usually the best route to go and just have one instance of itunes managing the library
but as long as the NAS or any media drives are shared out, connecting to it should not be a problem. it's the writing to the itunes library that's the issue. i haven't used Match so can't help there.
depending on your OS, you can either ctrl-click or option-click on the itunes icon,
which will also give you the option of selecting a library location upon launching itunes
you can navigate to the location of the library file and point it to that.
technically, you could do that but i believe the actual library has to be stored locally
as long as you still have all the media, then you can just rebuild the library
but for locally shared items, as in, all inside the home, i would leave icloud out of the equation
just use itunes sharing and it should be fine -
New Mac, fresh install of Mountain Lion
When I click to open a .Pdf from a web page,while in Safar, I get a black window
Nothing opens in Preview or in Acrobat
No option to downloadOpen the Finder. From the Finder menu bar click Go > Go to Folder
Type of copy paste the following:
/Library/Internet Plug-Ins
Click Go. If you see this file: AdobePDFViewer.plugin
Drag it to the Trash, empty the Trash.
Quit and relaunch Safari. -
Why is Mavericks running so slowly after a fresh install on my Macbook Pro?
I have a 13-inch, Early 2011 Macbook Pro.
Towards the end of 2013 Mountain Lion had been running very sluggishly, and I was getting the spinning beachball of death all the time, so I decided to do a fresh install of Mavericks. I wiped my whole HD using disk utility and installed Mavericks from a flash drive.
I then installed Microsoft Office 2011 from the original DVD and set up Mac Mail to work with my Gmail account etc. All very standard. I also installed X-Code and various other things related to my work, but nothing crazy. My HD is only half-full (I have 141 GB of free space).
Despite this, everything is running really sluggishly (especially when MS Office programs are open) and I have to watch the beachball of death spin for about 10 seconds every minute.
Any help is greatly appreciated!
Here is the Etrecheck output:
Hardware Information:
MacBook Pro (13-inch, Early 2011)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 2 days 3:4:35
Disk Information:
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 319.21 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898 disk2 : (8.09 GB)
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.robohippo.HippoConnectDaemon.plist 3rd-Party support link
[System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
[System] cx.pow.firewall.plist 3rd-Party support link
Launch Agents:
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.robohippo.HippoConnectAgent.plist 3rd-Party support link
[System] com.trusteer.rapport.rapportd.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
[not loaded] cx.pow.powd.plist 3rd-Party support link
User Login Items:
iTunesHelper
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Trusteer Endpoint Protection 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Epson Printer Utility 4: Version: 9.17 - SDK 10.5 3rd-Party support link
/Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Smultron: Version: 3.8.4 - SDK 10.0 3rd-Party support link
Time Machine:
Auto backup: YES
Volumes being backed up:
Destinations:
Time Machine Backups [Local] (Last used)
Total size: 412.18 GB
Total number of backups: 4
Oldest backup: 2014-01-07 12:40:04 +0000
Last backup: 2014-01-20 17:50:35 +0000
Size of backup disk: Excellent
Backup size 412.18 GB > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
17% Mail
8% mtmd
5% mds_stores
3% mds
2% iTunes
Top Processes by Memory:
217 MB Mail
184 MB com.apple.WebKit.WebContent
139 MB softwareupdated
115 MB mds_stores
106 MB Google Chrome
Virtual Memory Information:
186 MB Free RAM
1.21 GB Active RAM
983 MB Inactive RAM
1.07 GB Wired RAM
7.85 GB Page-ins
326 MB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -q XML\|exec && echo $f; done; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`SP USB | awk '/V.*[(]/{if ($3 !~ /0(5a|a5)c/) print}' | wc -l`; Ps "3rd-party USB devices"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print}' | tail`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec sh
and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
So, I've got several thousand photos, and a decent amount of videos of my daughter, along with a lot of stuff for work stored on my Time Capsule, and now I can't access any of it. I did a fresh install of Mavericks on my MacBook Pro last week sometime, and haven't been able to figure out how to get my files back. Please Help!!! My daughter is 2 and a half, and every picture/video I have of her is locked on this thing. I was planning on making some photo/video projects fo my wife for Christmas, and now I'm definitely not going to be able to pull it off. Her birthday is at the end of January, though, so if I could have it by then, that would rule!
Basically, the bar on the right of the screen has some gray dates, which I can access (all backups after the Mavericks install), and purple dates that go all the way back to March (when I originally purchased and began using the TC) which deny me access/viewing. It's possible that I created a slightly different user name when I reset my MacBook, which I guess is most likely the cause, but I have no idea what to do now to correct it. Thanks for taking the time!Mavericks does really nasty stuff..
Try manually mounting the sparsebundle and extract the files you want.
Yet another Pondini reference. http://pondini.org/TM/15.html
We have avoided Mavericks you see knowing that it would cause these kinds of issues..
You never ever load a new OS without doing a disk image beforehand.. TM is not reliable enough or trustworthy to be depended on.
If none of the above work..
I would get a USB drive on the computer and install Mountain Lion or whatever OS you had before you unfortunately upgraded to Mavericks.. Then use TM from that decent installation but mount the sparsebundle and choose the backup from a date well before mavericks was installed.
Once you have extracted the files.. or even done a full restore you might be able to extract the files you want.
Maybe you are looking for
-
How do I switch my iTunes account (with all my music) from my PC to my new Mac?
I originally opened an iTunes account on my PC. I have a little over 1,000 pieces of music on it. I now own a Mac, but don't know how to get my music onto my iTunes account from my Mac. I also own an iPhone and the classic iPod if that helps.
-
My application throws some fault error report and pops up a screen needing user response. I would like to kill that process once it is thrown. Is there a way I can do it programmatically this issue happens in the middle of start() and close() method
-
I have read as much as I can about this topic...and nothing seems to work. I have several new G4 emacs in a computer lab...they are all 256 mb RAM...actually, some are 512. We are getting the spinning lollipop/ball . I have emptied the recent items a
-
My computer busted so I got a new one and downloaded itunes. I logged in then connected my ipod Touch so that i couldget more music but it said that i have to erase everything on it in order to sync with the new library. I got my music from a bunch o
-
OID사용시 LDAP SERVER의 IP ADDRESS 및 PORT 변경시 절차 (OID 9.0이상)
제품 : ORACLE SERVER 작성날짜 : 2004-07-30 OID사용시 LDAP SERVER의 IP ADDRESS 및 PORT 변경시 절차 (OID 9.0이상) ======================================================== PURPOSE OID를 사용하는 경우 경우에 따라 ldap data가 저장된 시스템, 혹은 ldap process가 구동되는 시스템의 ip나 hostname이 변경되거나 혹은 o