Automating user creation for Unity Connection when sync'd with LDAP

Hi
Is it possible to automatically create users that sync with unity connection?
I have a unity connection 7.0 server that is sync'd with LDAP and i use a ldap filter so that only users with a specific attribute are sync'd. I can see the users when i try to do an import but is there anyway that they can automatically be created

No
Check this check box so that Cisco Unity Connection gets basic information on Connection users from the LDAP directories that you specify on the LDAP Directory page. Data is synchronized only for the Connection users that you created by importing users from the LDAP directory. Connection does not automatically create new Connection users when new users are added to the LDAP directory.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/gui_reference/guide/7xcucgrg100.html#wp1069724
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

  • COBRAS Import for Unity Connection 8.5 and Subscriber LDAP Integration Status

    Using COBRAS Import for Unity Connection 1.1 Build 212 with Unity 4.2 Voicemail Only and Connection 8.5(1)SU1 with LDAP Directory Integration
    When I run COBRAS the old alias matches the new alias and my desire is for subscribers being moved to be LDAP inegrated.  However after COBRAS runs, the radio box for LDAP Integration Status on the subscriber is set to Do Not Integrate with LDAP Directory. Is there a way for COBRAS to select Integrate with LDAP Directory when the alias matches on LDAP?

    Hi ben,
    If you are just importing from and not authenticating against LDAP, then the PIN comes
    from the Connection Template you used to build the users;
    Note that no passwords or PINs are copied from the LDAP directory to the Connection database. If
    you want Connection users to authenticate against the LDAP directory, see the “LDAP
    Authentication” section on page 9-7.
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/design/guide/8xcucdg040.html
    Cheers!
    Rob
    "Show a little faith, there's magic in the night" - Springsteen

  • Where do I set up rules for conflict resolution when syncing iTunes with Outlook?

    I just got an iPhone 5 and I'm coming from a Blackberry.  I've been syncing Outlook Calendar and Contacts to a portable device for over 10 years, even back in the day of the pocket pc and more recently the Blackberry.  My iPhone 5 syncs great and seemlessly with Outlook using iTunes.  I've had no issues as of yet.  The problem for me is, it just seems "too" easy.  I didn't see anywhere where I could set rules for conflict resolutions.  For example, if your pc says one thing but your iPhone says another, who wins and supercedes the other?  What if by accident your iPhone loses all of its data, then iTunes syncs with your pc - will it delete all the Outlook data on your pc because it thinks it's syncing with updated data from your iPhone?  (in my case data I've had for over 10 years) 
    With the Blackberry software it asked you to set up rules for conflict resolution when first connecting the phone (including an option to ask you first).  In my case, I chose to have it ask me whenever it discovered a conflict.  So whenever I synced, it specifically alerted me exactly how many items are being synced, and then if there were any conflicts, it'd stop and then ask me which device I want to supercede the other.  This gave me a lot of piece of mind.  Now after getting my iPhone and using iTunes to sync, it's been great so far but I have to say that I don't have as much piece of mind.  Does anyone have any feedback on how to set up conflict resolution with iTunes and Outlook or does it not exist at all?  Again, what would happen if there was a conflict between the two devices? 

    Yes! Thankyou for that. I had of course put the context.xml file in the web-inf directory.
    I followed your example to the letter and it still wouldn't work. Or rather, I followed to the letter expect for the difference between "WEB" and "META".
    Once I worked that out, it started working like a dream.
    Note to anyone else who has a similar problem, make sure you REALLY look at the answer given. Make sure you REALLY do have all the files in the suggested places. It will save you time.
    Thanks again.

  • Licensing for Unity Connection after Upgrade from 8.5 to 9.1.2

    I upgraded my Unity connection from 8.5.1 to 9.1.2. ( my CUCM is still on 8.5.1) . I have 200 CUWL-STD ( 2200 DLUs), and 50 CUWL-PRO (850 DLUs) . Now I am working with Cisco to get a license file for Unity Connection and apply that to my ELM. I attached my licensing page for when I was in 8.5.1 . Just want to make sure if I will be getting enough license with that license file, or possibly I need to buy more. Someone told me that if I want to have users with mailbox I need to order more licenses since every user take one CUWL license.
    Honestly i do not know how CUWL licensing work regardig to Unity or even CUCM.
    Thanks,

    Hi,
    The following link provides details of licenses usage by diff endpoints on version 9.x
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/uct/9_1_1/CUCM_BK_U0AE00F5_00_uct-admin-guide/CUCM_BK_U0AE00F5_00_uct-admin-guide_chapter_0100.html
    HTH
    Manish

  • Java Version for Unity Connection 7.1

    Hi,
    We have recently found that the latest Java Version 7 Update 11 when automatically updated on the users PC, the Unity Connection web page does not work when Media Master is used. The controls or menu does not respond.
    Windows 7
    IE 9.08112.16421
    Java 7 Update 11
    Does Unity Connection 7.1 only support Java 6 Update 33?
    Will there be a patch from Cisco?
    Thanks

    Hi,
    There is a known issue that Cisco Unity Connection requires Java Version 6 update 31 and
    earlier to work with. For more information, refer to teh bugs below:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto92753
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsw33324
    The most stable version we have seen is the Java version 6 update 30 or 31.
    Regards,
    Tere.
    If you find this post helpful, please rate!

  • Syslog For Unity Connection

    Hi All,
    Is it possible to enable syslog for helpdesk administrator user id in unity connection?  If yes, will it capture all the activity who is doing what in unity (all activity including voicemail Pin reset with extn details).
    Please help me here to close the security team concern for this.
    Thanks in advance !!!!

    Hello,
         The feature your looking for is called 'Audit Logs' have a look at http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/8_5_1/admin/saaulog.html
         Here is a very cut down list of logged Unity Connection events.
    Command-Line Interface
         All commands issued via the command-line interface are logged
    Cisco Unity Connection
         Cisco Unity Connection Administration logs the following events:
         •User logging (user logins and user logouts).
         •All configuration changes, including but not limited to users, contacts, call management objects, networking, system settings, and telephony.
         •Task management (enabling or disabling a task).
         •Bulk Administration Tool (bulk creates, bulk deletes).
         •Custom Keypad Map (map updates)
    Cisco Personal Communications Assistant (Cisco PCA)
         The Cisco Personal Communications Assistant client logs the following events:
              •User logging (user logins and user logouts).
              •All configuration changes made via the Messaging Assistant.
         The one issue is that I am not aware of being able to send these files to an external syslog sever, they are only written to the servers own log files. Maybe somebody else can add further assistance.
    Hope this helps,
    Craig
    (PLEASE RATE HELPFUL POSTS)

  • When syncing iPhone with iTunes I get an iTunes stopped working and the network connection timed out message. I reinstalled iTunes and checked settings still no go.

    When syncing iPhone with iTunes I get an iTunes stopped working and the network connection timed out message. I reinstalled iTunes and checked settings still no go.

    Disable or turn off your firewall, anti-virus, and all security software and try the download again.
    Stedman

  • HT5278 When sync ipad2 with itunes, was asked to update ipad IOS to 5.1.1 but unsuccessful to download. same thing for itunes 10.6.3. It works when download externally. wonder what is the solution!?

    Dear friends,
    When sync ipad2 with itunes, was asked to update ipad IOS to 5.1.1 but unsuccessful to download. same thing for itunes 10.6.3. It works when download externally.
    wonder what is the solution!?

    There is no download for iTunes on the iPad.
    iTunes on the iPad is a link for the store only, it is built into ios.

  • Downloaded cd book to old macbook iTunes. can sync to iphone when connect to old macbook but erased when sync phone with new macbook air. how do i get the cd book onto the macbook air?

    ran out of room...how do i get the cd book onto my new macbook air? downloaded to old macbook from cd. goes on list when sync iphone with old mac. gets erased when sync with new macbook air
    thanks

    Copy it from the old computer to the new one.

  • Lost my apps when sync iPad with iTunes

    when sync iPad with iTunes, apps purchased in iPad by another account were lost, and the apps can't be seen when check for available downloads. How to get back the purchased apps? thanks.

    If you lost all your apps on both the iPad and the computer, you can download the apps again at no cost. You can search your emails for app store purchases if you can't remember all the apps that you have downloaded.

  • Need suggestion for Unity Connection 9.1(2) alert on SIB failure?

    On Unity 8.x I had a monitor on the UnityMTA folder as an easy way of knowing when messages weren't being passed to Exchange.
    I'm looking for an alert to notify me on CUC v9.1(2) (SIB) when messages cannot sync with a user's exchange mailbox.  I'd like to know of any problems, even just for a single user, before the user knows.  Any suggestions?

    Unfortunately, I don't think there is any intuitive or simple way to get what you want here. There are Single Inbox Traces via the Connection Mailbox Sync service but you'd then need some sort of automated way to pull/parse that data and I think that would be rather cumbersome.
    Hailey

  • Wildcard Certifiate support for Unity Connection

    Does Unity Connection started supporting Wildcard cerficates for the Unified messaging with Exchange integration?
    CUPS 8.6.4 started supporting it for Calendar integration but we are not getting any document related to Unity Connection which states its supported now.
    BR,
    Sachin

    Hi,
    Thanks for the question.
    Okay so I did some digging and found a few details that will help clear this up.
    1. The documentation is wrong and we will be getting it correct as soon as we can. The CUC 9 admin guides states that you need to create an 'External Service' however this configuration has been changed.
    2. Yes, Exch 2010 and I'm sure Exch 2013 will be supported. TTS uses IMAP for the connection method and as long as Exch permits IMAP traffic you're good.
    3. To configure TTS, of course enable IMAP for Exchange. On the CUC side, you'll need to start with the class of service and check the following "Allow Access to Exchange Email by Using Text to Speech (TTS)". Then you'll need to create a new unified messaging service where you add the details of the Exch server and make sure to check "
    Access Exchange Email by Using Text to Speech (TTS)". Then apply that UM service to an end user and test. FYI, when you check the message from the TUI it will be the option of external messages (default option 7).
    Let me know if you have any other questions.
    Good Luck,
    Brad

  • /RestoreRoutingRule CLI for Unity Connection

    I am consolidating several unity 7.2 servers into Unity Connection 8.5.
    I have hundreds of routing rules which are in use today which I need to recreate on the Unity Connection server.  I read in  the COBRAs help that I can run the CLI /RestoreRoutingRules to restore the routing rules which is what I would like to test.
    In the COBRAS tool, I can not modify the path name of the backup to include the /RestoreRoutingRules so am just wondering how I do this?  If someone can provide a reference or direction on where / how I do this, it would be most helpful.
    Thanks.

    I'm not sure I understand what you mean by " I can not modify the path name of the backup " - you don't need to - when you run the COBRASImportForConnection.exe, you pass the "/RestoreRoutingRules" option on the command line.  So in other words you can open a command box on your Windows machine where you installed import, go to the directory where you installed it (by default C:\Program Files\Cisco Systems\COBRAS\COBRAS Import for Connection\) and run the tool like this:
    COBRASImportForConnection /RestoreRoutingRules
    it'll then offer you the option to include routing rules in your restore (a seperate wizard page will be displayed during the import for this).
    You can also add the CLI option via the desktop shortcut if you'd rather but I usually just open a command box for such things.

  • Fix for Unity connection bug CSCtl41495

    Hi,
    I need a fix for this bug but don't see any of the following versions available under Unity Connection download page. The current release I am having is 8.0.3 ES22 and would like to stay on 8.0.3 release.
    Fixed-In
    8.5(1.0)ES17
    8.6(0.99981.1)
    8.0(3)ES25
    8.0(3.23028.1)
    8.6(0.18)
    8.6(0.96000.132)
    8.6(0.96000.53
    Can someone clarify when the next full version 8.0(3.23028.1) would be available for download on CCO? Or can recommend any other version available on CCO which has a fix for this bug. I checked the release notets of available versions, couldn't see it fixed in any of them.
    Thanks,
    inner_silience

    Hi,
    This has been ported back to 8.0(3).  If you open a TAC case, we can publish you the latest 8.0(3)ES27 that contains the fix.
    Hope that helps,
    Brad

  • Itunes crashes when syncing Ipad with mp4 movies in photo folder for keynotes

    I'm trying to upload a small MP4 video onto my Ipad to use in Keynotes. I place the video in the photo folder and select sync, then tunes crashes.
    I had created the video in Corel Video Studio pro 3 and created MP4 file. Copied to the IPAD and had it all working. I then made changes to the video and reconverted and now Itunes crashes when syncing.
    Itunes 10.4.1.10 Ipad 4.3.5
    Please help urgent

    I had the same problem, and it turns out that the problem is having the same file into different folders. For example I had an MP4 in iTunes, and the same file in the photos folder that was being updated to the iPad. So I just removed one file and it syncs perfectly.

Maybe you are looking for

  • JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

    Hi, I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ?? I am not sure whether this is a valid question..........but any help in this

  • Need help with formating in a dashboard prompt

    Hi This should be an easy one. I'm creating some dashboard prompts and been looking on the Sample OBIEE and some prompts there. Well, what I would like to do is a prompt so simple as: Prompt Label: - alt1 - alt2 - alt3 - and so on ... Have you seen w

  • How can I copy photos from the Photo Library to a new computer(located elsewhere)??

    I use 2 PCs and an iPhone 4S I added photos to the phone which appear in the Photo Library, but want to copy them to my second computer (different place). How can it be done?

  • Re:"Alarm Clock" message

    hi, I got the similiar problem as mentioned in "Alarm Clock" message. Can anyone be so kind tell me how it comes and how to deal with it? Thanks, char i m writing a program using kstat library for monitoring purpose. when i run the program it runs pe

  • Display xls file in iView

    Friends, I want to display the xls file in iView. Tell me whether its possible or not? If yes, than how? If someone has done this than pls. tell me the procedure to do that. Thanks. Hitesh