Automating user related Changes
Hi,We have a prod server and a failover server. Is there a way that we can automate a process wherein user created on one server get migrated to another server on a nightly basis. For one time deal I did use Sec. Mon tool. Thanks,Minash...
Exif
This is a command line program for manipulating metadata. It's the tool I would use for this task. If you have any Unix/Liniux/etc... background it's probably the best route to take. But you can use the XMPScript stuff that comes with PS/JS if you really want to, especially if you want to get familiar with the environment and do more work with it.
Similar Messages
-
How to allow users to change password
I have enabled users to change their passwords in the Server.app for the Default Site with SSL, and who can access is a group of individuals.
When I load up the Server site, I am presented with
a Login to which I then add my username and password and I am then presented with
Welcome to OS X Server
OS X Server makes it easier than ever for the people in your organization to collaborate, communicate, and share information.
I Choose My Settings and the site is redirected to /changepassword of which a page comes
Forbidden
You don't have permission to access /auth/ on this server.
The Directory /Library/Server/Web/Data/Sites/Default/auth/ exists with the corret permissions. This is an empty directoy tho
Apache Logs:
Directory index forbidden by Options directive: /Library/Server/Web/Data/Sites/Default/auth/
I cannot get this to work. WIki's are turned on but that doesnt work either.
If I Launch /wiki, I am prompted to login, to with I do, and i just get a blank web page
Apache logs:
File does not exist: /Library/Server/Web/Data/Sites/Default/__collabd
This is on a new install of OSX server
Any Suggestions?Hi,
On the landing page at the bottom it should say "change password".
That brings you to a forbidden page?
On my server I do not have the /auth/ folder in my default site, but my changepassword page does work.
Can you check if going to https://127.0.0.1/changepassword does work? It will give an SSL error.
Then it might be DNS related conflicting with another router/server in your network
Or... charge $ 5 per user to change his or her password personally
Goodluck!
Jeffrey
StarPine Support -
Hi,
I have an odd issue whereby if I set "user must change password" on an AD account, the end user cannot logon, they're simply taken back to the OWA login page as if their password is incorrect.
My setup is as follows:
outer TMG -- uses a listener for email.contoso.com and is configured for no authentication.This uses a publishing rule to publish the inner TMG server. This server is not a domain member.
inner TMG - uses a listener for email.contoso.com and is configured for NLTM\kerberos negotiation with forms authentication (Windows Active Directory). This server is a domain member and use a publishing rule to publish the internal CAS. Allow users to change
password is selected in the publishing rules.
Exchange 2010 SP1 - uses integrated windows and basic authentication. Has the appropriate registry key configured to allow users to change their AD password on first logon.
I've registered an snp for "http/email.contoso.com mailserver-dc1", all SSL certificates being used are valid and my configuration used to allow users to login and change their password with "user must change password on first login"
set in AD.
If I launch a web browser on an internal server and point it to email.contoso.com I'm immediately presented with a generic Windows authentication request (similar to what's seen in ADFS) rather than the standard OWA page. No matter what I do, I cannot login
and change my password using the correct URL. However if I point my browser at
http://192.168.4.10/owa I'm prompted to login and I can change my password using the sam credentials.
The only recent changes made are:
- Disabling SSL 3.0 and enabling TLS (http://www.isaserver.org/articles-tutorials/configuration-security/improving-ssl-security-forefront-threat-management-gateway-tmg-2010-published-web-sites.html)
- Replacing the TMG listener certificates so that they now use SHA2 rather than SHA2 (certificates are trusted on each TMG server)
Looking on the outer TMG and the DC logs I can see schannel errors which I believe are related to the problem. TMG monitoring also shows "Failed connection attempt: 1907 The user'spassword must be changed before logging on for the first time"
I've checked that my inner TMG and DC are using the same certificate for server authentication and gone through this guide:
http://blogs.technet.com/b/keithab/archive/2012/02/29/setting-up-and-troubleshooting-ldaps-authentication-in-forefront-tmg-2010.aspx
If I try to use ldp.exe on the inner TMG, I get the error in the pic below
Thanks
IT Support/EverythingHi,
You could try to analyze the TMG tracing and try the troubleshoot steps in the blog below.
TMG 2010 – FBA, troubleshooting the change password feature
http://blogs.technet.com/b/isablog/archive/2012/05/07/tmg-2010-fba-troubleshooting-the-change-password-feature.aspx
Best Regards,
Joyce -
Blocking User to change the "Configure Columns"
Hi,
I have a folder which is "Files" views
Is there any to block User to change "Configure Columns" in folder option?
Thankscityec,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Device related bundles missing, User related OK.
Device related bundles mising on devoices, user related ones OK.
One devices with cache intact they work fine, but after zac cc and zac ref bypasscache they are gone.
Have tried to restart zenserver (single primary) no change
Rebuilt internal sybase 1 month ago.
Any idea whats up ?
Se log below:
[DEBUG] [03/19/2012 21:31:46.336] [1416] [ZenworksWindowsService] [32] [dkadmin] [Remote Management Module] [] [(RM_DEBUG)session.IsTSClientSession : True (RM_DEBUG)] [] []
[DEBUG] [03/19/2012 21:31:55.068] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ResetConnections()] [] []
[DEBUG] [03/19/2012 21:31:55.068] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ clearing host table] [] []
[DEBUG] [03/19/2012 21:31:55.068] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ clearing IP address table] [] []
[DEBUG] [03/19/2012 21:31:55.068] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ clearing IP URI table] [] []
[DEBUG] [03/19/2012 21:31:55.068] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) ProcessRefresh entered] [] []
[DEBUG] [03/19/2012 21:31:55.068] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ResetConnections()] [] []
[DEBUG] [03/19/2012 21:31:55.068] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ clearing host table] [] []
[DEBUG] [03/19/2012 21:31:55.069] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ clearing IP address table] [] []
[DEBUG] [03/19/2012 21:31:55.069] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ clearing IP URI table] [] []
[DEBUG] [03/19/2012 21:31:55.069] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Invoking BeginRefreshEvent] [] []
[DEBUG] [03/19/2012 21:31:55.069] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Notifying 5 BeginRefreshEvent handler(s). Order is:] [] []
[DEBUG] [03/19/2012 21:31:55.069] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 Novell.Zenworks.NotifyIcon.Module.Internal.Refresh Handler.OnBeginRefresh(OnBeginRefresh)] [] []
[DEBUG] [03/19/2012 21:31:55.069] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 Novell.Zenworks.ServerVersionModule.ServerVersionM odule.OnBeginRefresh(OnBeginRefresh)] [] []
[DEBUG] [03/19/2012 21:31:55.069] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 Novell.Zenworks.Zmd.ServiceManager.BeginRefreshEve ntHandler(BeginRefreshEventHandler)] [] []
[DEBUG] [03/19/2012 21:31:55.069] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 Novell.Zenworks.AppModule.AppRefreshHandler.BeginR efreshEventHandler(BeginRefreshEventHandler)] [] []
[DEBUG] [03/19/2012 21:31:55.069] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 Novell.Zenworks.Zmd.ContainmentRefresh.Containment Refresh.BeginRefreshEventHandler(BeginRefreshEvent Handler)] [] []
[DEBUG] [03/19/2012 21:31:55.069] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Calling method OnBeginRefresh in handler Novell.Zenworks.NotifyIcon.Module.Internal.Refresh Handler.OnBeginRefresh: BeginRefreshEvent] [] []
[DEBUG] [03/19/2012 21:31:55.069] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Novell.Zenworks.NotifyIcon.Module.Internal.Refresh Handler.OnBeginRefresh returned in 0 ms] [] []
[DEBUG] [03/19/2012 21:31:55.069] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Calling method OnBeginRefresh in handler Novell.Zenworks.ServerVersionModule.ServerVersionM odule.OnBeginRefresh: BeginRefreshEvent] [] []
[DEBUG] [03/19/2012 21:31:55.070] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Novell.Zenworks.ServerVersionModule.ServerVersionM odule.OnBeginRefresh returned in 0 ms] [] []
[DEBUG] [03/19/2012 21:31:55.070] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Calling method BeginRefreshEventHandler in handler Novell.Zenworks.Zmd.ServiceManager.BeginRefreshEve ntHandler: BeginRefreshEvent] [] []
[DEBUG] [03/19/2012 21:31:55.070] [1416] [ZenworksWindowsService] [32] [] [ZMD] [] [Getting Session Capability] [] []
[DEBUG] [03/19/2012 21:31:55.070] [1416] [ZenworksWindowsService] [32] [] [ZMD] [] [URI: https://dksvbr1233-vi.corp.draka.com...s-zoneconfig/] [] []
[DEBUG] [03/19/2012 21:31:55.070] [1416] [ZenworksWindowsService] [32] [] [ZMD] [] [URI: https://10.103.192.233/zenworks-zoneconfig/] [] []
[DEBUG] [03/19/2012 21:31:55.070] [1416] [ZenworksWindowsService] [32] [] [ZMD] [] [Getting Session Capability] [] []
[DEBUG] [03/19/2012 21:31:55.070] [1416] [ZenworksWindowsService] [32] [] [ZMD] [] [URI: https://dksvbr1233-vi.corp.draka.com...s-zoneconfig/] [] []
[DEBUG] [03/19/2012 21:31:55.070] [1416] [ZenworksWindowsService] [32] [] [ZMD] [] [URI: https://10.103.192.233/zenworks-zoneconfig/] [] []
[DEBUG] [03/19/2012 21:31:55.070] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [FindFirstContent()] [] []
[DEBUG] [03/19/2012 21:31:55.071] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ ] [] []
[DEBUG] [03/19/2012 21:31:55.071] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ ] [] []
[DEBUG] [03/19/2012 21:31:55.071] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ Could not find host: dksvbr1233-vi.corp.draka.com] [] []
[DEBUG] [03/19/2012 21:31:55.071] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ Could not find host: 10.103.192.233] [] []
[DEBUG] [03/19/2012 21:31:55.071] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [Trying to locate source location: https://dksvbr1233-vi.corp.draka.com...s-zoneconfig/] [] []
[DEBUG] [03/19/2012 21:31:55.071] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ Host name to resolve: dksvbr1233-vi.corp.draka.com] [] []
[DEBUG] [03/19/2012 21:31:55.071] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ Adding host: dksvbr1233-vi.corp.draka.com, status: Unknown] [] []
[DEBUG] [03/19/2012 21:31:55.072] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ Host: dksvbr1233-vi.corp.draka.com, IP address: 10.103.192.233] [] []
[DEBUG] [03/19/2012 21:31:55.072] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ Adding IP address: 10.103.192.233] [] []
[DEBUG] [03/19/2012 21:31:55.072] [1416] [ZenworksWindowsService] [34] [dkadmin] [ZenNotifyIconHide] [] [APP_SETTING_HIDE_Z_ICON : false] [] []
[DEBUG] [03/19/2012 21:31:55.073] [1416] [ZenworksWindowsService] [34] [dkadmin] [ZenNotifyIconShowProgress] [] [APP_SHOW_PROGRESS : true] [] []
[DEBUG] [03/19/2012 21:31:55.073] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ Adding IP Uri https://10.103.192.233/zenworks-zoneconfig/ status: Unknown] [] []
[DEBUG] [03/19/2012 21:31:55.073] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ Pinging location: https://10.103.192.233/zenworks-zoneconfig/] [] []
[DEBUG] [03/19/2012 21:31:55.073] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) GetObject(PROXY_OVERRIDE, UserContext{_LocalId=none; _RemoteId=(Public)}) called] [] []
[DEBUG] [03/19/2012 21:31:55.076] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) GetObject returning <not cached> in 2 ms] [] []
[DEBUG] [03/19/2012 21:31:55.076] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) GetObject(PROXY_DEFAULT, UserContext{_LocalId=none; _RemoteId=(Public)}) called] [] []
[DEBUG] [03/19/2012 21:31:55.078] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) GetObject returning <not cached> in 1 ms] [] []
[DEBUG] [03/19/2012 21:31:55.078] [1416] [ZenworksWindowsService] [32] [] [ZMD] [] [KeepAlive is read from registry. KeepAlive = True] [] []
[DEBUG] [03/19/2012 21:31:55.082] [1416] [ZenworksWindowsService] [32] [] [ConnectMan-ping] [] [ Using uri: https://10.103.192.233/zenworks-zoneconfig/] [] []
[DEBUG] [03/19/2012 21:31:55.083] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [Marking location dksvbr1233-vi.corp.draka.com Good at the request of module ZoneConfiguration] [] []
[DEBUG] [03/19/2012 21:31:55.083] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ Setting location name dksvbr1233-vi.corp.draka.com to status Good] [] []
[DEBUG] [03/19/2012 21:31:55.083] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [Marking location 10.103.192.233 Good at the request of module ZoneConfiguration] [] []
[DEBUG] [03/19/2012 21:31:55.083] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ Setting location name 10.103.192.233 to status Good] [] []
[DEBUG] [03/19/2012 21:31:55.083] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [Marking location https://10.103.192.233/zenworks-zoneconfig/ Good at the request of module ZoneConfiguration] [] []
[DEBUG] [03/19/2012 21:31:55.083] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ Setting location name https://10.103.192.233/zenworks-zoneconfig/ to status Good] [] []
[DEBUG] [03/19/2012 21:31:55.083] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ Setting location https://10.103.192.233/zenworks-zoneconfig/, IP address 10.103.192.233, and host dksvbr1233-vi.corp.draka.com to status: Good] [] []
[DEBUG] [03/19/2012 21:31:55.083] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [ Using location: https://10.103.192.233/zenworks-zoneconfig/, status: Good] [] []
[DEBUG] [03/19/2012 21:31:55.083] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [FindFirstContent() returning https://10.103.192.233/zenworks-zoneconfig/] [] []
[DEBUG] [03/19/2012 21:31:55.083] [1416] [ZenworksWindowsService] [32] [] [SoapUtility] [] [Checksumming soap call with UID: ZoneConfig:GetZoneConfiguration] [] []
[DEBUG] [03/19/2012 21:31:55.083] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) GetObject(PROXY_OVERRIDE, UserContext{_LocalId=none; _RemoteId=(Public)}) called] [] []
[DEBUG] [03/19/2012 21:31:55.085] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) GetObject returning <not cached> in 1 ms] [] []
[DEBUG] [03/19/2012 21:31:55.085] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) GetObject(PROXY_DEFAULT, UserContext{_LocalId=none; _RemoteId=(Public)}) called] [] []
[DEBUG] [03/19/2012 21:31:55.086] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) GetObject returning <not cached> in 1 ms] [] []
[DEBUG] [03/19/2012 21:31:55.086] [1416] [ZenworksWindowsService] [32] [] [ZMD] [] [Soap Utility: KeepAlive is read from registry. KeepAlive = True] [] []
[DEBUG] [03/19/2012 21:31:55.088] [1416] [ZenworksWindowsService] [32] [] [SoapUtility] [] [Added checksum to request: 8c3a371f8ecd31b1a0e62c398a8cb0c268de5a1c70d4430a39 5275a184b70cd2] [] []
[DEBUG] [03/19/2012 21:31:55.230] [1416] [ZenworksWindowsService] [32] [] [SoapUtility] [] [Received 304; not modified. Using cached response.] [] []
[DEBUG] [03/19/2012 21:31:55.231] [1416] [ZenworksWindowsService] [32] [] [SoapUtility] [] [Retrieving cached HTTP response, Key: ZoneConfig:GetZoneConfiguration] [] []
[DEBUG] [03/19/2012 21:31:55.231] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) GetObject(ChecksummedHttpResponse:ZoneConfig:GetZo neConfiguration, UserContext{_LocalId=none; _RemoteId=a6df11f5e54d974aaf16e093f73c0e61}) called] [] []
[DEBUG] [03/19/2012 21:31:55.235] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) GetObject returning C:\Program Files\Novell\ZENworks\cache\zmd\ZenCache\6659bfeb-8f24-4945-aa49-6848483bd84d in 3 ms] [] []
[DEBUG] [03/19/2012 21:31:55.235] [1416] [ZenworksWindowsService] [32] [] [SoapUtility] [] [Using cached response.] [] []
[DEBUG] [03/19/2012 21:31:55.235] [1416] [ZenworksWindowsService] [32] [] [CacheableHttpWebResponse] [] [Getting Response Stream] [] []
[DEBUG] [03/19/2012 21:31:55.236] [1416] [ZenworksWindowsService] [32] [] [CertManager.AddCertificates] [] [Adding cert: bd8a4b19236b3e83320e715e589818e7 for hosts: DKSVBR1233-Vi.corp.draka.com, 10.103.192.233] [] []
[DEBUG] [03/19/2012 21:31:55.236] [1416] [ZenworksWindowsService] [32] [] [CertManager.AddCertificates] [] [Beginning L4 Map Creation...] [] []
[DEBUG] [03/19/2012 21:31:55.236] [1416] [ZenworksWindowsService] [32] [] [CertManager.AddCertificates] [] [Checking for map on host: DKSVBR1233-Vi.corp.draka.com] [] []
[DEBUG] [03/19/2012 21:31:55.236] [1416] [ZenworksWindowsService] [32] [] [CertManager.AddCertificates] [] [Map for host: DKSVBR1233-Vi.corp.draka.com was null] [] []
[DEBUG] [03/19/2012 21:31:55.236] [1416] [ZenworksWindowsService] [32] [] [CertManager.AddCertificates] [] [Checking for map on host: 10.103.192.233] [] []
[DEBUG] [03/19/2012 21:31:55.236] [1416] [ZenworksWindowsService] [32] [] [CertManager.AddCertificates] [] [Map for host: 10.103.192.233 was null] [] []
[DEBUG] [03/19/2012 21:31:55.236] [1416] [ZenworksWindowsService] [32] [] [CertManager.AddCertificates] [] [Calling into setL4Map.] [] []
[DEBUG] [03/19/2012 21:31:55.236] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) PutObject(certManager.serverCertificates, UserContext{_LocalId=none; _RemoteId=(Public)}) called] [] []
[DEBUG] [03/19/2012 21:31:55.240] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [Type: System.Collections.Generic.Dictionary`2(System.Str ing,Novell.Zenworks.Zmd.Services.wsdl.CertificateM ap)] [] []
[DEBUG] [03/19/2012 21:31:55.253] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) PutObject returning C:\Program Files\Novell\ZENworks\cache\zmd\ZenCache\2a7766f5-1664-4c0e-95be-281233681e96 in 16 ms] [] []
[DEBUG] [03/19/2012 21:31:55.253] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) PutObject(certManager.hostToCertificateMap, UserContext{_LocalId=none; _RemoteId=(Public)}) called] [] []
[DEBUG] [03/19/2012 21:31:55.294] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [Type: System.Collections.Generic.Dictionary`2(System.Str ing,System.Byte()())] [] []
[DEBUG] [03/19/2012 21:31:55.306] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) PutObject returning C:\Program Files\Novell\ZENworks\cache\zmd\ZenCache\283f9775-8d65-49ed-afa8-606348585d48 in 52 ms] [] []
[DEBUG] [03/19/2012 21:31:55.306] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) DeleteObject(certManager.l4Map, UserContext{_LocalId=none; _RemoteId=(Public)}) called] [] []
[DEBUG] [03/19/2012 21:31:55.308] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) DeleteObject returning False in 1 ms] [] []
[DEBUG] [03/19/2012 21:31:55.316] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) PutObject(Service_Web_f92df4b698361d1e47bde96484e7 9dc2, UserContext{_LocalId=none; _RemoteId=(Public)}) called] [] []
[DEBUG] [03/19/2012 21:31:55.326] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [Type: System.String] [] []
[DEBUG] [03/19/2012 21:31:55.333] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) PutObject returning C:\Program Files\Novell\ZENworks\cache\zmd\ZenCache\6c3a0c1d-7976-4283-8c9f-b413540d0878 in 16 ms] [] []
[DEBUG] [03/19/2012 21:31:55.333] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) PutObject(Service_Web_f92df4b698361d1e47bde96484e7 9dc2, UserContext{_LocalId=none; _RemoteId=(Public)}) called] [] []
[DEBUG] [03/19/2012 21:31:55.335] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [Type: Novell.Zenworks.Zmd.WebService] [] []
[DEBUG] [03/19/2012 21:31:55.351] [1416] [ZenworksWindowsService] [32] [] [ZenCache] [] [(Thread 32) PutObject returning C:\Program Files\Novell\ZENworks\cache\zmd\ZenCache\8268a2af-ab3c-4263-9b76-3bd816a997cc in 18 ms] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; Device bundles not getting to devices , however USer assigned bundles get thru just fine.
Some devices that still have cached device bundle info run fine, but after zac cc + zac ref bypasscache the device assigned bundles
are gone.
Internal Sybase that was rebuilt ca 1 month ago.
Any ideas ?
See part of attached debug log:
RefreshType=GeneralRefresh) Novell.Zenworks.Zmd.ServiceManager.BeginRefreshEve ntHandler returned in 281 ms] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Calling method BeginRefreshEventHandler in handler Novell.Zenworks.AppModule.AppRefreshHandler.BeginR efreshEventHandler: BeginRefreshEvent] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Novell.Zenworks.AppModule.AppRefreshHandler.BeginR efreshEventHandler returned in 0 ms] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Calling method BeginRefreshEventHandler in handler Novell.Zenworks.Zmd.ContainmentRefresh.Containment Refresh.BeginRefreshEventHandler: BeginRefreshEvent] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [ContainmentRefresh] [] [Do nothing on BeginRefreshEventHandler] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Novell.Zenworks.Zmd.ContainmentRefresh.Containment Refresh.BeginRefreshEventHandler returned in 0 ms] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Finished Notifying 5 BeginRefreshEvent handler(s): 0,283 seconds] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Refresh Ordering:] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 Novell.Zenworks.Zmd.ContainmentRefresh.dll] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 FileHandlerRefresh] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 QuickTaskRefresh] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 Registration Module] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 ImagingServer:: TFTP Replication Refresh Handler] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 ImagingServer::TFTPContentUpdateRefreshHandler] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 ImagingServer::ContentRefreshHandler] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 ImagingRefreshHandler] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 SatelliteServerRolesRefreshHandler] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 AuthSatelliteRefreshHandler] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 CDPRefreshHandler] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 SCPRefreshHandler] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 ZenHttpServerRefreshHandler] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 Assignment Manager Module] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 ContentMgr::ContentRefreshHandler] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 SystemUpdateRefreshHandler] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 ActionManagerRefreshHandler] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 Policy Manager Module] [] []
[DEBUG] [03/19/2012 21:31:55.352] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 Novell.Zenworks.Settings.dll] [] []
[DEBUG] [03/19/2012 21:31:55.353] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 AppModule] [] []
[DEBUG] [03/19/2012 21:31:55.353] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [ 32 Inventory Manager] [] []
[DEBUG] [03/19/2012 21:31:55.353] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Calling Refresh Handler: Novell.Zenworks.Zmd.ContainmentRefresh.dll] [] []
[DEBUG] [03/19/2012 21:31:55.353] [1416] [ZenworksWindowsService] [32] [] [ContainmentRefresh] [] [Its device refresh - Do nothing on Refresh] [] []
[DEBUG] [03/19/2012 21:31:55.353] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Finished Refreshing Novell.Zenworks.Zmd.ContainmentRefresh.dll: 0 ms] [] []
[DEBUG] [03/19/2012 21:31:55.353] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Calling Refresh Handler: FileHandlerRefresh] [] []
[DEBUG] [03/19/2012 21:31:55.353] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Finished Refreshing FileHandlerRefresh: 0 ms] [] []
[DEBUG] [03/19/2012 21:31:55.353] [1416] [ZenworksWindowsService] [32] [] [RefreshMgr] [] [(Thread=32; SessionId=999; RefreshType=GeneralRefresh) Calling Refresh Handler: QuickTaskRefresh] [] []
[DEBUG] [03/19/2012 21:31:55.353] [1416] [ZenworksWindowsService] [32] [] [ZMD] [] [Getting Session Capability] [] []
[DEBUG] [03/19/2012 21:31:55.353] [1416] [ZenworksWindowsService] [32] [] [ZMD] [] [URI: https://dksvbr1233-vi.corp.draka.com...ktaskservice/] [] []
[DEBUG] [03/19/2012 21:31:55.353] [1416] [ZenworksWindowsService] [32] [] [ZMD] [] [URI: https://10.103.192.233/zenworks-quicktaskservice/] [] []
[DEBUG] [03/19/2012 21:31:55.353] [1416] [ZenworksWindowsService] [32] [] [ConnectMan] [] [FindFirstContent()] [] []Hello,
Encountering the same issue here: my impression is that the default port 80 is not in use, but during installation a different port is setup for connecting with the content-repo. Excuses, but my knowledge ends here. I haven't found out yet how to check, edit, restore the used port.
Anyone a clue for us?
Much appreciated,
Sleegemi -
Not allow user to change Vendor in MB1B(541 mov) in subcontracting process
Hi all
Im doing 541 mov type in mb1b wrt PO number, the vendor number is automatically fetching from PO but user can change the vendor there,
I have to set display field as vendor,not allow to change vendor in MB1B..how can i set??? plz help me
thanks
ramesh reddyHi,
I would like to remeber you there is no direct connection between the purchase order and the
subcontractor stock. When you enter the purchase order in the MB1B
transaction, the data defaults from the purchase order only as an aid to
entry.
Please review the following notes for further explanations:
70739 - No order-related stock of material provided in R/3
50540 - Quantity proposal for movement type 541 for the
The transaction is designed to be a way to simplify the input of the
data. It allows you to change the data and overship or undership if you
would like. As there is no vendor stock specifically related to a
purchase order, there is no quantity check, and if you want, you can
post it several times or change the quantity.
In standard procedure we normally use ME2O instead of MB1B
BR
Nadia Orlandi -
Build BAPI to automate user creation/change/deletion .
Hi,
Want to automate repeating request of user creation, change and deletion and can be called from external application hence consider to build a BAPI. The question is how to find what's abap system program to call in methods of BAPI corresponding function modules?
Thanks,
DavidHi David,
Run BAPI transaction and search for USER in the alphabetical order list of BAPI's, there you will find BAPI's related to User Creation, Change, etc.
Hope this may help you in your process -
Can Communication User Id change its password
Hello Experts,
Can Communication User Id change its own password and can the password be deactivated automatically even after when its used?
Regards,
SumsNote that if either Communication or System users have authorizations themselves for the user management (S_USER_GRP actvt '05' for the assigned user group) then they will both be able to change passwords (including their own if in that group or not assigned to one).
This is different to changing your own password voluntarily or being forced to by system password rules, but it is also a possibility you should ideally rule out (admin auths for RFC to change passwords).
Unfortunately, several RFC functions and transactions make "bogus" checks on exactly this authorization but do not need them. You you need to be carefull with it. Particularly anything relating to Business Parter functions should be very suspect if you find it in an authorization trace - it is not needed.
Cheers,
Julius
Edited by: Julius Bussche on Sep 20, 2011 10:30 PM -
Exchange 2013 OWA user must change password at next logon not working
Hi,
I have installed Exchange 2013 on Windows 2012 Server. I create users in ECP and select "user must change password at next logon" option. When newly created user logs in, the OWA page doesn't prompt for password change and just throws error "The
user name or password you entered isn't correct. Try entering it again"
I have enabled Change Password feature in CAS server, but still not working.
Any answers, suggestions would be great help
Regards
SunilHi Sunil,
Have you tried as Martina said and does it work?
If not, please try to set the Minimum Password Age to 1 according to link below. I found some threads which are similar to yours and were solved by this way in Exchange 2013 environment.
http://support.microsoft.com/kb/827614
And for further troubleshooting, please create a new user with "user must change password at next logon" option checked and see if he can log on domain-joined PC.
In addition, please check the event log to see if there is any related error message.
Regards,
Rebecca -
Is it possible for an end user to change application Theme?
Hi
Is it possible for an End user to change the theme or Font of the application.
We have a requirement where End user should able to change color or font of application (like we do theme change in some social networking websites)
Please provide some suggestions.
Many Thanks
--VijayYou could:
1. export your current theme
2. change the exported file using a good editor and change the path
#IMAGE_PREFIX#themes/theme_10/
to
#IMAGE_PREFIX#themes/theme_&THEME_NUMBER./
and do that also with all strings related to that theme number.
3. crete an application item THEME_NUMBER
4. create an application computation for THEME_NUMBER to set it to a value (10) in case the value is null
5. import the theme and make it the current theme
6. create a link in your application which will set the value of THEME_NUMBER to whatever - 1 to 20 for the standard themes - and submit the change
This will change the template as you specify.
This explanation is of course simplified. Depending on the design of your application it may require considering some other details that need to be adjusted.
Something like in this example:
http://apex.oracle.com/pls/otn/f?p=25882:1
The assumption is that all of your referenced classes in all css files have the same name for the same class with a leading theme number (which istn't the case in standart themes). However, this can at least give you an idea on how to proceed. I have done that with some custom themes I created and it works very well.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
2012 R2 RD Session Host Domain Users Cannot Change Password
I set up a Windows 2012 R2 Session Host as per
http://support.microsoft.com/kb/2833839 and joined it to the domain. Now, users are unable to change their password. When they log in to the RDSH and "ctrl-del-end", they are given the change password dialog, but they are told that
their password "doesn't meet complexity requirements" even if it does. I suspect the issue is related to the fact that there is no "session collection" per se and that the "connection broker" role is not installed.
Is there any way around this? The end game would be to have them log into this RDSH and be able to change their password to conform with the domain password policy
PaulKHi Paulk,
Did you mean that all users cannot change passwords? Based on my experience, this issue was not related ro the RD connection broker role.
Please check the password policy in group policy of the domain to see if any password policy caused this issue:
Computer Configuration\Windows Settings\Security Settings\Account Policies\Password Policy
For more information, you can refer to the link below:
https://technet.microsoft.com/en-us/library/hh994572(v=ws.10).aspx
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Hi all,
I just wondered if there was anyway to update wiki users of changes that have been made to the wiki, e.g new pages added or posts modified? I can't seem to see any modules that might relate to this.
Any thoughts?
Thanks.There is a page on the wiki server called 'updates' is this what you mean?
Also each Wiki and Blog can be subscribed to by clicking the RSS button and then clicking subscribe in mail -
In ALV Report ,a field to allow the user EDIT/CHANGE
Hi Guys,
My requirement is
in the ALV Grid display iam having 10 fields.5th field should be allow the user EDIT/CHANGE mode.
what ever he enters the value the same should be updated to an custom table.
EX.
o/p:
0001 0002 0003 0004 0005 0006 0007 0008 0009 0010
Now the user changed the value 0005 to 0011.
0001 0002 0003 0004 0011 0006 0007 0008 0009 0010
now 0011 should be updated in custom table.
to do this process please suggest a best way for coding.
thanks in advance.
Sunil.hi
*& Report ZTESTDEMO_INTERACTIVE_LIST_2
REPORT ZTESTDEMO_INTERACTIVE_LIST_2.
TABLES: MARA,MARC,MARD.
* internal table itab_mara 3 fields matnr, ernam,mtart
DATA: BEGIN OF ITAB_MARA OCCURS 0,
MATNR LIKE MARA-MATNR, " material number
ERNAM LIKE MARA-ERNAM, " name of person who create
MTART LIKE MARA-MTART, " Material Type
END OF ITAB_MARA.
* internal table itab_marc 3 fields matnr, werks,lvorm
DATA: BEGIN OF ITAB_MARC OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS, " Plant
LVORM LIKE MARC-LVORM, " Flag Material for Deletion at Plant Level
END OF ITAB_MARC.
* internal table itab_mard 2 fields
DATA: BEGIN OF ITAB_MARD OCCURS 0,
MATNR LIKE MARD-MATNR,
LGORT LIKE MARD-LGORT, " Storage Location
END OF ITAB_MARD.
SELECT-OPTIONS: S_MTART FOR MARA-MTART.
INITIALIZATION.
S_MTART-LOW = 'HALB'.
S_MTART-HIGH = 'HAWA'.
S_MTART-OPTION = 'BT'.
APPEND S_MTART.
START-OF-SELECTION.
SELECT MATNR ERNAM MTART FROM MARA INTO TABLE ITAB_MARA WHERE MTART IN
S_MTART.
PERFORM DISPLAY.
TOP-OF-PAGE.
WRITE:/2(15) 'MATERIAL NO',20(20) 'CREATED BY',45(15) 'MATERIAL TYPE'.
FORM DISPLAY.
LOOP AT ITAB_MARA.
WRITE:/ ITAB_MARA-MATNR UNDER 'MATERIAL NO' HOTSPOT ON,ITAB_MARA-ERNAM
UNDER 'CREATED BY',ITAB_MARA-MTART UNDER 'MATERIAL TYPE'.
HIDE: ITAB_MARA-MATNR.
ENDLOOP.
ENDFORM.
AT LINE-SELECTION.
CASE SY-LSIND.
WHEN 1.
SELECT MATNR WERKS LVORM FROM MARC INTO TABLE ITAB_MARC WHERE MATNR =
ITAB_MARA-MATNR.
PERFORM DISPLAY1.
WHEN 2.
SELECT MATNR LGORT FROM MARD INTO TABLE ITAB_MARD WHERE MATNR =
ITAB_MARC-MATNR.
PERFORM DISPLAY2.
when 3.
sy-lsind = 0.
ENDCASE.
FORM DISPLAY1.
LOOP AT ITAB_MARC.
WRITE:/ ITAB_MARC-MATNR HOTSPOT ON, ITAB_MARC-WERKS,ITAB_MARC-LVORM.
HIDE: ITAB_MARC-MATNR.
ENDLOOP.
WRITE:/ SY-LSIND.
ENDFORM.
FORM DISPLAY2.
LOOP AT ITAB_MARD.
WRITE:/ ITAB_MARD-MATNR, ITAB_MARD-LGORT.
ENDLOOP.
WRITE:/ SY-LSIND.
ENDFORM.
regards
ravish
<b>plz dont forget to reward points if helpful</b> -
SPEL? make REASON field required if user has changed the value in SALARY
I have a requirement to make REASON field required if user has changed the value in SALARY field. Is it possible using spel? what are my options?
Karan,
You can change the Rendered Property through personalization.
But in your requirement you need to attach the Spell through personalization & extend the existing CO to set the value of the SPELL based upon the condition.
Note - Refer this thread http://forums.oracle.com/forums/thread.jspa?threadID=2176729&tstart=0. If you have worked on SSHRParams kindly help the user.
Regards,
Gyan -
Using alter user to change oracle password for logged in web user on XE
Hi All
I'm building an app using the pl/sql web toolkit on XE (installed on Win XP Pro SP2). (I'm not using the APEX front-end).
I'm using basic authentication and oracle database user accounts, and when a user registers for the first time I create them an oracle user account with dynamic sql, followed by some initial setup stuff, and they then log in with it.
All fine so far.
However I want to allow the user to change their oracle password as part of maintaining their user details. I've done this in the past using the web toolkit and Oracle 9i and it has worked fine using dynamic sql.
Unfortunately I can't get the same thing to work in XE.
For example, if I create the following procedure in the schema aligned to the DAD which holds my application and then run it from a browser (IE or Firefox) then the
Browser and the db just hangs - not even an error message:
CREATE OR REPLACE PROCEDURE ut
AS
v_stmt varchar2(300);
BEGIN
HTP.htmlOpen;
HTP.headOpen;
HTP.title ('User Test');
HTP.headClose;
HTP.bodyOpen;
v_stmt := 'alter user "'||user||'" identified by "BERT"';
htp.print(v_stmt);
EXECUTE IMMEDIATE v_stmt;
htp.print('Done');
HTP.bodyClose;
HTP.htmlClose;
END;
If I run the same statement in SQL*plus it's fine, and if I run the same proc for a different user then it's fine too.
I'm sure it's something to do with trying to change the credentials of the currently logged in user, but I would at least have expected an error message.
I'd be grateful for any ideas.
Thanks
SteveHi g.myers
Thanks for your response.
Sorry, yes, bad turn of phrase there. It's not the entire db that hangs. The web browser (either IE or FF) hangs, and if I look at v$session at this point, I can see that the user STATUS=ACTIVE and the STATE=WAITING.
I should also point out that I am using standard Oracle users as users of the application, (e.g. create a new user account called TESTER1). These users are then granted the appropriate privileges on the owning schema in order to run the app, access the tables etc.
Therefore it is the user account (e.g. TESTER1) that is running the password change procedure that is owned by the SYS schema. (However again, this is the exact code and method that I've used in the past and it has worked fine).
If I leave the browser hanging long enough, it will eventually return with the following error:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request POST /h/hopapp.pwdmaint_do.
Reason: Error reading from remote server
cheers
Steve
Maybe you are looking for
-
Can I connect 2 different networks with 2 different IP on 1 G5 mac at same time by installing another network adapter?
-
How do I find where my DHCP server is on my network?
I have a home network, a BT server, with an iMac, a MACBook Pro, two back-ups (Airports) and a Squeezebox (for internet radio). The problem is that the Squeezebox keeps dropping out and informing me that it cannot find the DHCP server. This did not
-
Error message for Calendar in iCloud,
A contact sent me an electronic meeting invitation. When he has done it in the past, an event was automatically created in my calendar using the Calendar app. I could then "accept" the invitation. And, as one would expect, the event was entered in
-
Recently, some of the songs in my itunes library cut off at approximately 2:30 minutes into the song. I thought it was a problem with my old ipod, but the same thing happens on a second ipod and on my iphone. The problem does not happen on my PC.
-
How to create a new virtual host under tomcat 4.1.x?
hi all i need some help creating a new virtual host under tomcat 4.1.18! that's what i do: i'm using the web configuration, reacheable by typing "http://localhost:8080" and then clickign administration i create a new host name: www.class-site.it appl