Automating video filters based on audio changes?

Hello,
I'm wondering if there is a non-manual way to automate the parameters of video filters based on increases and decreases in audio track
I'm aware that filter parameters can be modified by hand using keyframes and curves, I'm just wondering if there is someway to have the software make these modifications based on changes in an audio track (or any other parameter).
Thanks,
T

You need Motion …
Here demo Mark&Steve, how audio manipulates a text.
https://youtu.be/m7WTBbx9VNI
You'll find many mor, all demo, how audio can be used to manipulate other values of objects.

Similar Messages

  • Effects/Audio and Video Filters in FCP

    Hi, i use FCP 7.0 and all of a sudden, the effects files went missing, i mean the tab is present and it shows all the folders, of video transitions/filters and of audio and all the master templates, but now all of the drop down menu files are gone.??

    Check Effect Availabilty and see whether Recommend or All is checked.
    Russ

  • Premiere Pro Timeline with 3 video channels and 4 audio channels, audio channels change to 8 channels when clip dragged onto timeline.

    Premiere Pro Timeline with 3 video channels and 4 audio channels, when clip dragged onto timeline audio channels change to 8 channels. Audio track mixer changes too. I edit undo to remove dragged clip and it reverts back to 4 channels of audio on timeline as does the audio mixer?  Any ideas as to why the audio channels and mixer changes?

    you can check the clip you are dragging to the timeline, if it has 8 tracks... can check by right clicking it in the project bin, choose modify, audio channels.
    The Video Road – Multichannel Audio in Premiere Pro

  • Mplayer doesn't play anything, could not initialize video filters

    When trying to play a video, this is what I get.  I've tried changing the video driver, same error
    [max@gayforceone ~]$ mplayer capture.avi
    MPlayer 1.0rc2-4.3.2 (C) 2000-2007 MPlayer Team
    CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz (Family: 15, Model: 3, Stepping: 4)
    CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
    Compiled with runtime CPU detection.
    115 audio & 237 video codecs
    mplayer: could not connect to socket
    mplayer: No such file or directory
    Failed to open LIRC support. You will not be able to use your remote control.
    Playing capture.avi.
    AVI file format detected.
    [aviheader] Video stream found, -vid 0
    [aviheader] Audio stream found, -aid 1
    Detected NON-INTERLEAVED AVI file format.
    VIDEO: [MJPG] 800x600 24bpp 15.015 fps 11713.4 kbps (1429.9 kbyte/s)
    Clip info:
    Name:
    Software: guvcview-0.9.5
    Comments: Fri Nov 28 06:58:53 2008
    ==========================================================================
    Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
    Selected video codec: [ffmjpeg] vfm: ffmpeg (FFmpeg MJPEG decoder)
    ==========================================================================
    ==========================================================================
    Opening audio decoder: [pcm] Uncompressed PCM audio decoder
    AUDIO: 44100 Hz, 1 ch, s16le, 705.6 kbit/100.00% (ratio: 88200->88200)
    Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
    ==========================================================================
    AO: [oss] 44100Hz 1ch s16le (2 bytes per sample)
    Starting playback...
    VDec: vo config request - 800 x 600 (preferred colorspace: Planar 422P)
    Could not find matching colorspace - retrying with -vf scale...
    Opening video filter: [scale]
    VDec: using Planar 422P as output csp (no 1)
    Movie-Aspect is nan:1 - prescaling to correct movie aspect.
    SwScaler: reducing / aligning filtersize 1 -> 4
    SwScaler: reducing / aligning filtersize 1 -> 4
    SwScaler: reducing / aligning filtersize 1 -> 1
    SwScaler: reducing / aligning filtersize 9 -> 8
    [swscaler @ 0x89d5f50]SwScaler: BICUBIC scaler, from yuv422p to yuv420p using MMX2
    [swscaler @ 0x89d5f50]SwScaler: using 4-tap MMX scaler for horizontal luminance scaling
    [swscaler @ 0x89d5f50]SwScaler: using 4-tap MMX scaler for horizontal chrominance scaling
    [swscaler @ 0x89d5f50]SwScaler: using 1-tap MMX "scaler" for vertical scaling (YV12 like)
    [swscaler @ 0x89d5f50]SwScaler: 800x600 -> 800x600
    VO: invalid dimensions!
    FATAL: Cannot initialize video driver.
    VDec: vo config request - 800 x 600 (preferred colorspace: Planar 422P)
    VDec: using Planar 422P as output csp (no 1)
    Movie-Aspect is nan:1 - prescaling to correct movie aspect.
    VO: invalid dimensions!
    FATAL: Cannot initialize video driver.
    FATAL: Could not initialize video filters (-vf) or video output (-vo).
    Exiting... (End of file)

    I've tried all the options in gmplayer, they all don't work.  I'm assuming the command line carries out the same functions.  I've tried a couple (but not all) and they didn't work either.

  • FCP crashes when Video Filters folder is double clicked

    I edit in FCP 5.0.4 with 2 monitors and like to keep the Video Filters folder open as a separate window along with the Effects folder. However, my custom window layout with this setting has disappeared and when I try to open Video Filters, FCP crashes. I've used FCP Rescue to no avail and have re-installed FCP software.

    I am capturing to a Ciprico dual channel U320 array attached to a ATTO UL4D SCSI controller. I don't use the system for these data intensive captures all that often and sometimes I have no problem at all and other times I do. I noticed that the raw movies would play in the quicktime player ok without stalling or dropping frames so the issue seems to be with final cut. The last time I had this problem was with playing back 720p DVCProHD files and it would only play for a few minutes and then give a error message about dropping frames and suggesting lowering the number of audio tracks and changing the RT settings. I am thinking there must be a software conflict. We just installed FCP 6 and this was the first capture I did with it and had the same old problem right off the bat.

  • IDVD is producing DVDs which chop the edges off my video.  I have tried changing the aspect ratio between 4:3 and 16:9 but it hasn't helped.  My TV is definitely on the correct settings.  How can I solve this?

    iDVD is producing DVDs which chop the edges off my video.  I have tried changing the aspect ratio between 4:3 and 16:9 but it hasn't helped.  My TV is definitely on the correct settings.  How can I solve this?

    One way to to put the videos into an iDVD slideshow
    and set iDVD's Slideshow preferences to always scale slides to TV Safe Area. 
    However, some users have reported that the audio quality using this method is lessened.  I've not noticed it but then I don't have a good ear when it comes to that sort of thing. If you add more than one video in the same slideshow do not select any transition.
    OT

  • How To Remove FLVPlayback Video on Scene with Audio

    I was trying to add a video for playback to be used in my Scene on Flash Professional CC. I imported the video and added it to my library, before adding it to my scene frame. My plan was to use the video and have its audio play in the background, while my Scene was running in the foreground. So I followed "Test Movie", then clicked on "In Flash Professional". I managed to have the Scene run in the foreground multiple times, while the video's audio was running in the background.
    However, while editing my scene and my video, I accidentally added the FLVPlayback component to my frame. I clicked on "Window", then clicked on "Components", and opened the "Components" window. I then dragged "FLVPlayback" from the "Video" folder, onto my Scene frame. Now, whenever I  follow "Test [my] Movie", my scene shows in the foreground while the video, that is, its image, graphics and audio, at the same time, run in the background.
    I want to get read of the "FLVPlayback" component so that I can get rid of the image and graphics running in the background when I "Test [my] Movie". I tried to reset my settings by clicking Ctrl+Alt+Shift and selecting my taskbar icon at the same time. I went through the whole process of restoring the default settings but it did not work.
    Can anyone help? By the way I am using the Flash Professional CC Trial Version.

    If you did a bunch of changes the only way to get back to how you had it before is to manually undo what you did yourself.
    To get rid of the FLVPlayback component just select it on the stage if it's there and press delete. Then in the library select the component and its skin folders and delete those as well. You should then just have your video in the library and any other assets you imported yourself. Then you can place the video back on the timeline if that's how you'd like to play it.

  • Does version 12 support producing video clip with AMR audio codec?

    From some documents i used as reference to proceude some videos for my phone Premiere Elements 8 can produce video clips with AMR audio codec. I bought today the Premiere elements 12 but I can not find a way to set AMR audio codec for my video clip. Only AAC audio codec seems available.   Is it possible to add AMR codec to 12 version?

    Neurona17
    Adobe typically supports only current version, and, if you purchased from it, is strict on "within 30 days of purchase": for money back on that current version purchase. I do not believe such a thing as a "change the license for other earlier release such as 8 or 9" exists at Adobe. But, you could ask. If you wish to purchase one of those earlier versions that supports AMR export, you might still find some online.
    Is the before import conversion of AMR to WAV a viable alternative?
    You wrote
    Unfortunately so far I have not been able to generate any useful video clip for my system with this 12 version.
    Is this in regard to the AMR requirement or to any video without the AMR audio?
    Online I have seen that there is a download for the AMR audio codec. Does your system now show that you have such a codec installed on your computer. If not, I am not sure if download of this codec would place it in the Premiere Elements Publish+Share export settings choices, similar to import of some .avi video codecs. (Sometimes 3rd party codecs can create problem, so proceed with caution if you pursue that AMR audio codec idea.
    Please update us on your progress when you get a chance.
    Thanks.
    ATR

  • Video filters not working anymore in FCE 3.5.1

    My video filters (i.e. color correction, levels, RGB balance) don't seem to be working anymore. The only things I've done lately are upgrade to 3.5.1 and also OS 10.4.8. I believe this problem started happening after the 10.4.8 upgrade.
    I've been working with video for some time, but am relatively new to FCE. My workflow was to doubleclick to open the filter, make the adjustments to the filter settings, then drag the filter to the clip on the timeline. This was working just fine but just doesn't work anymore.
    Other things such as transitions work fine. LiveType and Soundtrack also seem fine.
    Anyone else have this problem, and how did they correct it? I have a project due tomorrow afternoon and would like to be able to fix ASAP.
    Thx in advance.
    G5 dual, 23 Apple Cinema Display, 19" ViewSonic widescreen   Mac OS X (10.4.8)  

    Tom,
    First:
    I did trash my prefs, first thing. However, I might not have gone deep enough with this. I only trashed User > Library > Preferences > com.apple.FinalCutExpress.plist.
    I produce a 10-minute weekly announcements DVD and as such have very little downtime for my apps. The project I'm working on now is much more important, although only about 6 minutes, but it's crucial and I didn't want to risk downtime if I screwed up by trashing something else and possibly causing me more work. So I've had a feeling maybe more should have been trashed.
    Second:
    To better explain my incorrect workflow, I've created some movies you can find here:
    http://little-works.com/sepia_ex.html
    In this first example, I created an exaggerated color for a sepia tone, something I would never use. If you click the link and go on to the next page, you'll see where I apply that filter to the clip in the timeline (it's actually a still picture, not a video clip), and beside that, you'll see the unchanged result. BTW, I did render that still after I applied the green sepia filter.
    What happened when I first installed FCE was that any and all changes I made in this manner immediately presented themselves (in other words, they "worked"). Now I see no change at all.
    I burned a rough cut of this project yesterday and it looks fine, but I've worked as an art director for too many years and am very picky! I know it's fine for my audience but a) I know it could look better b) I want it to work right.
    I appreciate any and all help on this. I've been a Mac user for over 20 years, but am a newbie to FCE and am learning on the fly. So far my results have been great and very much appreciated by my audience(s), but I want to go much deeper into the program, as I am only touching the tip of the iceberg and don't want to develop bad habits from the get-go!
    Thx --
    G5 dual, 23 Apple Cinema Display   Mac OS X (10.4.8)  

  • Linksys WVC210 Automated Video/Image Capture

    So i have a need to do automated video/image capture from a pair LinkSys WVC210's, they are being used in a friends shop and aswell as being able to view from home there is also a requirement to record them.
    It needed to be simple and not a big combersome display with fairly large hardware requirements like the supplied software, so i started with a VB Script doing what i wanted but had the need to do some more advanced stuff so ported it over to VB.Net and would like to share the software/source if anyone else want's something similar.
    Bassicly it is a Command Line App that accepts 4 arguments.
    Usage is as follows:
    LinkSysWVC.exe 192.168.1.211 Front 10 10
    Where the first arg is obviously the Camera's IP, the 2nd arg is a Name for the camera that will be used in the filenames of videos and images, the 3rd arg is how long to record for in seconds, and the final arg is how many loops to do
    The Program uses native VB code to download the image from the camera and save it to a file, and mencoder to capture the streaming video.
    I chose mencoder as it is cross platform, simple, supports streaming containers and can output virtually any video.
    It saves the stream as a AVI with the following specs:
    Video
    Format                           : MPEG-4 Visual
    Bit rate                         : 384 Kbps
    Width                            : 720 pixels
    Height                           : 576 pixels
    Display aspect ratio             : 5/4
    Frame rate                       : 6.000 fps
    Audio
    Format                           : MPEG Audio
    Format profile                   : Layer 3
    Codec ID                         : 55
    Codec ID/Hint                    : MP3
    Bit rate mode                    : Constant
    Bit rate                         : 64.0 Kbps
    Channel(s)                       : 1 channel
    Sampling rate                    : 8 000 Hz
    Resolution                       : 16 bits
    At the moment there is no error checking, all it does is attempt to ping the camera if it responds then it starts the capture process.
    C:\>LinkSysWVC.exe 192.168.1.211 Front 10 10
    LinkSys IP Camera Recorder.
    Camera IP: 192.168.1.211
    Camera Name: Front
    Recording Blocks: 10 seconds
    Recording Loops: 10
    Trying to ping 192.168.1.211...
    Ping Reply 16 msec.
    Beginning Capture...
    Looping 10 Times.
    Saved Current Image to "09-2-21 - 143325 - Front - 1.jpg"
    Saved Current Image to "09-2-21 - 143337 - Front - 2.jpg"
    Saved Current Image to "09-2-21 - 143350 - Front - 3.jpg"
    Saved Current Image to "09-2-21 - 143402 - Front - 4.jpg"
    Saved Current Image to "09-2-21 - 143414 - Front - 5.jpg"
    Saved Current Image to "09-2-21 - 143426 - Front - 6.jpg"
    Saved Current Image to "09-2-21 - 143438 - Front - 7.jpg"
    Saved Current Image to "09-2-21 - 143451 - Front - 8.jpg"
    Saved Current Image to "09-2-21 - 143503 - Front - 9.jpg"
    Saved Current Image to "09-2-21 - 143515 - Front - 10.jpg"
    Exiting...
    Download LinkSysWVC.exe (23kb)
    Download mencoder.exe (12.3mb)

    Hi,
    I am using Linksys WVC8oN Cisco camera, I want to automate image capturing and video capturing.
    I tried using LinkSysWVC.exe, the first image is captured after that it throws an error. What is the setup is required?
    for mencoder.exe what is the command line argument to be passed to get video captured?

  • Updating a value of a text item in a multi record block based on a change

    Hi,
    I need to change the value of a text item in a multi record block based on a change to another item's value in the same block.
    Suppose there's a text item in a multi record block called dt1 which is of type date, which is changed in a particular record. I want to change the values of the another item in the same multi record block, for all other records by running a loop through all the records in multi record block. I dont want to do it on the press of a button, it should do automatically on change. Help me resolve this issue.

    Hi,
    I need to change the value of a text item in a multi record block based on a change to another item's value in the same block.
    Suppose there's a text item in a multi record block called dt1 which is of type date, which is changed in a particular record. I want to change the values of the another item in the same multi record block, for all other records by running a loop through all the records in multi record block. I dont want to do it on the press of a button, it should do automatically on change. Help me resolve this issue.

  • My new macbook pro has little to no sound on all video's. I've changed all the settings but it's still no loud. is there something i've missed trying?

    my new macbook pro has little to no sound on all video's. I've changed all the settings but it's still no loud. is there something i've missed trying?

    Turn off Find My iPhone in iCloud on the iDevice.
    Log out of iMessage, Facetime, remove Apple ID from iTunes & App Store.
    Use Settings > Reset > Erase All Content and Settings.
    Then set it up as a new iPhone with your own Apple ID.

  • Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
    Not necessarily.  That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
    If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio.  You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

  • How can I cut a section of video, but leave the audio playing?

    iMovie 6
    Hi, I want to edit, or remove a small section of video, but leave the audio playing in the background. I want to just put up a picture in the same spot. But, I need the video's audio to keep playing. I videotaped someone speaking, but there is a section where there is a mistake, namely, the camera was moved. I need to keep the audio going, and figured I would just put a still image of text or picture in the section where the mistake is, that's why I need the audio to keep playing. It's too long of a section to just do a transition to cover the mistake. Can someone help me with this? I guess you could call what I want to do is cut to a still image while the audio keeps playing?
    Thanks
    Message was edited by: thomjw

    thomjw,
    Have a look at this article:
    http://docs.info.apple.com/article.html?path=iMovie/HD/en/im18.html
    Post back if you still have questions.
    Matt

  • How can I delete the video and keep the Audio  in a few frames using Imovie 11

    How can I delete the video and keep the Audio  in a few frames using Imovie 11?

    I've met the problem too before. but i solved it with  Audio Converter Mac instead of iMovie. If you have similar situation that just want to keep audio but not video, and if your file format is not workable in iMovie, you can use the Audio Converter for help too. it can easily help to extract audio soundtrack from any video format. Or if you need to convert one audio format to another, it is a good choice too, because it supports many common audio output formats.
    <Link Edited By Host>

Maybe you are looking for