Automation doesn't move with region.

Hi. Had a problem I have to insert a lapsteel track for 8 bars at the intro of a session. I've mixed he song but when I select all drag all the regions 8 bars insert the track, the automation on some of the tracks isn't moving so the mix is all wong. Is there a fix for this......

Antony Smith wrote:
Got it soughted. On the Aux tracks I penciled a mute track and selected all, that moved the automation.
That's one way to do it, and it works quickly.
Another method is to move the automation regions within the automation folder. This is a lesser known window. You need to access the automation events lists (via a key command). With that event list open, open a new arrange window. You'll see regions on the arrange page (they look like MIDI or audio regions), but these regions are your automation data.
These can be moved, cut, etc... on the timeline, just like MIDI and audio regions.

Similar Messages

  • Time line indicator doesn't move with clips shown

    I don't know what I did but the blue time line marker does not move with the scenes of the clips ???   The movie rolls but the time is not indicated and the blue line is stationary and far behind the scenes.  What's up with that?

    Genetrump
    If you right click the Monitor and select Playback Settings, what does it list? Does it look anything like this screenshot?
    ATR

  • CTI Doesn't Move with Arrow Keys PE12

    I am running into a glitch in Premiere Elements 12. When I nudge the CTI (playhead) using the arrow keys it moves only 1 frame no matter how many times I press the over arrow. The audio continues to scrub and the time indicator continues to change for each frame, but the CTI itself is stuck and no longer represents the proper location.
    Anyone solved this?
    I am using a MacBook Pro running OS 10.8.5.

    Thanks ATR for you reply, here I will try to explain my findings.
    My hw. sw. setup
    MACBook Pro, OS X 10.9.4, 16Gb, licensed Premiere Elements 12.1 upgraded from 12.0
    Just to confirm....are you saying that if you do just a one tap on the right or left arrow key, the Timeline Indicator will move 1 frame.              YES (if slow repeat).
    But, if you hold down and continue to hold down on the right of the right or left arrow key, the Timeline Indicator will not go into a continuing movement?     YES.
    >> Today I have found that this problem only show up in ”Expert” edit mode and not in ”Quick” mode.
          1. Current Timeline Indicator (CTI) only move/jump one frame when I first start to hold right or left key pressed, after this first jump CTI will stop to move,
                my movie and time counter will move and count as expected.
          2. If I repeat pressing right or left key with a speed faster than one press per 3seconds the CTI will be stopped,  slower repeat than every 3 second then CTI will move on every key press.  
          3. Note1   when CTI not move during continue key press or fast repeat R/L (< 3sec) the accumulated new CLI position will show up as a long jump on next press after 3sec paus.  
          4. Note2   I have also verifies with my Win7 friend with a new installed PE 12.1 running just fine without this CTI problem.  (MAC version only??)
    If so, several things that I would like you to do if you have not already....
    1. Delete the Adobe Premiere Elements Prefs file which should be found
        Users\Libraries\Application Support\Adobe\Premiere Elements\12
    >> After I delete the Adobe Premiere Elements Prefs file I did restart PE12 program and created  a new project ( an new PE Prefs was automatic create in the same directory as expected)
          But unfortunately my problem is still there.  
    2. In the opened project, go to Edit Menu/Preferences/General and experiment with the Timeline Playback Auto-Scrolling Options (No Scroll, Page Scroll, and Smooth Scroll).
    ATR Premiere Elements Troubleshooting: PE12/12.1: Timeline Playback Auto-Scrolling
    >> Thanks, here I found lot of good reading but your suggestion to change the Timeline Playback Auto-Scrolling Options did change scrolling behavior,
           unfortunately my problem is still there. 
    I am strictly an Elements Windows user, so please double check the translation of the suggested locations from Windows to Mac.
    How would describe your issue - "it worked before but not now" or "it never worked before".
    >> My best answer must be;  I have not seen this problem before but I´m trying to learn video editing so I could have missed the CTI behavior.
    Looking forward to your follow up.
    Thank you.
    Add On...Like the originator of this thread, are you working with a tryout of Premiere Elements 12/12.1?
    No this is a licensed version 12.0 upgraded to 12.1
    Summary:
    My conclusion must be that this CTI behavior is a software bug  (maybe only in MAC versionPE12 or in  some combination).
    How to fix my problem:
    Will a reinstall likely fix the problem?
    Or is´t a case for Adobe Support to handle? 
    I´m happy for any help here.
    Regards.
    Per

  • Can I create a footer that doesn't move with a scrolling layout?

    I'm making a book that has horizontal and vertical layouts, and I'd love to make a footer that stays put while the content scrolls. Is that possible?
    ----S

    Having  taken almost an hour using my primitive Aussie download speed Broadband,  to download the 1gig plus book...and expecting some supa dupa new gizmo..... Its a great example of  using the power of iBA coupled  together with a full understanding of how to use the built in options and facilities.
    Apart from certain  things which I personally don't like ( six mini sized videos on a white page ) it is a masterclass worth downloading by anybody wanting to  have a reference work at hand. It is free and basically from what I see, its  a brochure for a company.
    The  virtical scrolling pages are...... just that and available to anybody using iBA and a LS template and wanting vertical scrolling - which I think is pointless , but hey....
    Basically, you create in LS and edit in Portrait.
    A comment in the  book was .. " I took  my staff to a beer tasting....."
    "My Staff", to me suggest the  book is a studio product
    Use the  Orientation icons top menu to see your  page in either modes.
    I suggest you  open a template and  use it as a test book.... I keep one all the time and its now full or trials and tests! OR, duplicate your  book and  play with the copy, it saves heartache when it goes wrong!
    Again my  disclaimer....  most people do not  like  turning the iPad around and as books made  with iBA are not  usable on other devices, I see no point in  having basically  duplicate  content seen in porttrait or LS.....after all, you do not keep grabbing your flatescreen TV and turning it  vertical , or expecting a cinema screen to rotate...
    Have some more fun......

  • Creating a layer mask that doesn't move

    Hi, I'm just starting to learn how to use After Effects. I'm trying to apply a mask to a layer. I figured out that right clicking on the layer and going to Mask > New Mask adds a mask. My problem however is that the the layer I want the mask to mask moves but I want the mask to stay still. How do I go about doing this? Thanks in advance for any help.

    Masks are on layers. Perhaps what you're looking for is a track matte. A track matte is a layer that defines transparency for an underlying layer. If you move the underlying layer, the track matte layer doesn't move with it (unless you explicitly connect them with parenting or something like that).

  • How can i get back the" Copy or Move automation with region?" dialog box?

    i was working on an arrangement moving lots of regions around and logic kept asking me about moving automation with regions and i got sick of it and clicked "Don't ask me again" Now i want to Logic to ask me again if i want to move automation with regions is there a way to reset this or get the dialog box back? thanx-gospel

    thanx sc. i will try it out shortly. Off Topic- since you speak german is was wondering if you don't mind what would the german translation be for "moonlight night tonight"- thanx gospel

  • Way to "anchor" item in a Region Footer so it doesn't move relative ...

    Now: Is there a way to "anchor" and item in a Region Footer so it doesn't move relative to the footer when the IE window is resized?
    Was: Stop Region Footer Items from moving to Header when IE window is resized?
    Using APEX 4.0.x under Oracle 11.2.y on Unix displaying to Windows 7.
    I use #TIMING# in a Region Footer of a chart where it displays in the lower left-hand corner. The chart slightly more than fills the window so I want to shrink it. But when I change the "zoom level" of the IE window (under IE 8.0.7601.17514) to say, 96%, the timing value (e.g., 0.02) displayed moves from below the chart at the left to above the chart on the right-hand side. ???
    Is there java / html that can be put in the Region Footer field with #TIMING# to prevent this?
    Howard
    Edited by: Howard (DBA in Training) on Oct 4, 2012 3:52 PM

    It sounds like you are not running the latest software. Connect to itunes. Go to the summary screen for your ipod and check what version of the software it says you are running. If it does not say 1.1, then you need to update.
    If it says 1.1, then I would suggest restoring.
    If you are running the 1.1 version of the software, if you hold the larger "Sleep/Wake" button down for a few seconds, it should shut down the nano.
    i

  • I'm trying to organize my movies with folders.  When I click "new folder", it either doesn't add any folder or adds a new folder as a "subfolder" of an existing folder.  Help!

    I'm trying to organize my movies with folders.  When I click "new folder", it either doesn't add any folder or adds a new folder as a "subfolder" of an existing folder.  Help!

    Thank you for the suggestion - I tried it but still didn't work.  When I click "New Folder" it gives me the pop-up to name the new folder, but doesn't put a new folder anywhere in my Project Library.

  • I have 3 macs. 2 are Lion, 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

    I have 3 macs. 2 are Lion, but 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

    What version of word do you have? The TS3938 sounds like it's a PowerPC app- written for an old architecture that is no longer supported in Lion. If this is the case, your files are fine- you just need a newer version of word that will run in Lion in order to open them. The newest version (2011) should be readily available anywhere, and has worked fine for me ever since I switched to Lion on release day....

  • Repeating automation together with region?

    How can I when I' m repeating a region on a track also get the automation in the region repeated?
    Message was edited by: Ron H.

    1. You can Export the region *as a new audio file* and use that instead of the original region. Put it on a new track and you can use the RR command no problem!
    (You can also put it on the same track, but then don't forget to delete the old automation.)
    2. I haven't tried this yet, but it should work: open the *Automation Event editor* with ctrl-⌥-E . Then open a new Arrange window, ⌘-1. This new arrange window displays regions exclusively containing automation, so anything you do here only affects automation. The Repeat regions command should work on those automation-regions too.
    3rd (old option) copy the original region by ⌥dragging. Select both. Dragcopy. Select all four. Dragcopy. Etc. In five steps you can make up to 32 copies.
    remark: I think it is an oversight that the Repeat Regions command does not 'listen' to the Copy Automation with Regions-preference. Another feature/fix request to send to Apple.
    regards, Erik.

  • Importing mov with alpha channel doesn't work

    Installed the new and "improved" Premiere Pro CC 2014 and having lots of issues.
    First off, importing .movs with an alpha channel doesn't work.
    Second, the playback in Premiere is much worse, dropped frames and dropped audio quite frequently.
    Anyone have any solutions or experiencing similar problems?

    Use PNG-24.
    Chris Georgenes
    Animator
    http://www.mudbubble.com
    http://www.keyframer.com
    Adobe Community Expert
    *\^^/*
    (OO)
    <---->
    masterys wrote:
    > Is there a difference between the way that the Windows
    and Mac versions of
    > Flash 8 Pro handle alpha channels on .bmp files? We are
    working with a .fla
    > that was created in the Windows version of Flash 8, but
    we are editing it with
    > the Mac version. When we import the .bmp files that we
    made on our Mac, the
    > alpha channels don't show up. But the same .bmp files
    that were imported with
    > the Windows version do display their alpha channels. We
    had to change the
    > format to .tif in order to avoid "losing" the alpha
    channel. Can anyone shed
    > any light on this? Thanks!
    >

  • Track automation not in sync with playback

    As of today any track automation that I manipulate is out of sync with the track by a beat. So if I adjust low frequency cut to jump from 20Hz to 1kHz at measure 64 1 1 1, when I playback it will make that adjustment at measure 63 4 1 1 instead, despite me looking at the line that's jumped from 20Hz to 1kHz on 64 1 1 1. Am I going crazy?
    This doesn't happen to any PREVIOUS track automation, but only new track automation. And it's always a beat early compared to what I assign to it. Also, this is not specific to a certain project, but happens to every project. In other words, I can't make any music really past notes and beat assignments.
    Does anyone have any idea what this means?
    I don't know if this helps, but here's the current configurations on the Automation menu:
    Move automation with regions: never
    snap offset: -5 ticks
    ramp time: 200 ms
    'Write' mode changes to: Touch
    Write automatino for (everything is checked off except "solo")
    Automation Quick Assic: [X] off

    Hi,
    Have you add plugins like Adaptive limiter and/or phase linear Eq on Master Out 1-2?
    If you add plugin that require Delay conpensation on the Master 1-2.
    Also the meter will be delayed...... try to add 5 or more instances of Adaptive Limiter on the master after automation is done...
    Maybe this should be related with Graphic delay that is not f compensate in logic 8, I'm not sure but when I add Plugins such as UAD for mastering reason I can see very large difference (not in sync with audio monitoring) on Meters viewing and all pre-recorded automation will be not in sync.
    But I'm not sure if this issue is related with only certain project... maybe you have plugin that add latency on Aux or Master out in those projects!
    check it.
    Thanks
    G
    g

  • Numbers 3.2 has changed too much, it doesn't work with my project anymore. How do I revert back to the previous version I was using?

    Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?

    The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
    You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
    Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
    This is done via a Jump to Sheet Automator Service (Dropbox download).  To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
    This will cause a new item to appear in your Numbers > Services menu.  Then, if you want a keyboard shortcut, go here in System Preferences and add one:
    You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
    This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
    SG

  • "Filter Mail Messages" in Automator doesn't filter out mails of today

    Is it me, or does the Automator action "Filter Mail Messages" doesn't have an option to find messages that have not been sent or received today. It seems that there is no option to get rid of the messages sent or received today while filtering.
    I mean there is no option for "Date received" -> "Not today"; and I seem to can not find any easy workaround for this.
    i.e. What I'm trying to do is, filter the messages that are in a certain mailbox and are not sent or received in the last 7 days. However, the mails of today always show up.
    I hope somebody had found a solution to this, it appears to be an obvious problem with the Automator, trying to work with the Mail App and many have probably run into this before.
    Thanks!

    OK.... Did a bit more debugging... updated script
    property secondsIn21Days : 1814400
    on run {input, parameters}
      try
      set dateToday to current date
      tell application "Mail"
      set archiveCount to 0
      set theArchiveMailboxName to "CurrentArchive"
      if (mailbox theArchiveMailboxName exists) = false then
      make new mailbox with properties {name:theArchiveMailboxName}
      end if
      repeat with aMessage in input
      -- set theMessages to input
      -- repeat with aMessage in theMessages
      set messageRDate to date received of aMessage
      set messageSDate to date sent of aMessage
      set messageSubject to subject of aMessage
      set messageID to id of aMessage
      set timeRDifference to 0
      set timeSDifference to 0
      -- if messageRDate > 0 then
      set timeRDifference to dateToday - messageRDate
      -- end if
      -- if messageSDate > 0 then
      set timeSDifference to dateToday - messageSDate
      -- end if
      display dialog messageSubject & " " & messageID & " " & timeRDifference & " " & timeSDifference
      if timeRDifference > secondsIn21Days then
      display dialog "Move " & messageID & " Received" & messageRDate & " " & messageSDate
      move aMessage to mailbox theArchiveMailboxName
      set archiveCount to archiveCount + 1
      else if timeSDifference > secondsIn21Days then
      display dialog "Move " & messageID & " Sent" & messageRDate & " " & messageSDate
      move aMessage to mailbox theArchiveMailboxName
      set archiveCount to archiveCount + 1
      end if
      end repeat
      end tell
      display notification "emails archived = " & archiveCount with title "Mail Archive"
      -- return -- Successful completion of handler.
      on error errStr number errorNumber
      -- If our own error number, warn about bad data.
      -- if the errorNumber is equal to 750 then
      -- display dialog "All items in the list must be integers."
      -- return integerSum -- Return the default value (0).
      -- else
      -- An unknown error occurred. Resignal, so the caller
      -- can handle it, or AppleScript can display the number.
      error errStr number errorNumber
      display notification "emails archived = " & archiveCount with title "Mail Archive"
      -- end if
      end try
    end run

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

Maybe you are looking for