Automation error element not found in vb6 2147319765 after upgrading the os
Hi we had updated our OS to windows 7 from XP.Previously we had an application in XP which is built on Vb 6 .The application throws an error message like Automation error --element not found with error code 2147319765 .The application shows the same error
message even after I ran the application in XP compatability mode.
The application is using data from other servers and all the servers are windows server 2003.
muneer
Double post:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/229b4e46-9bcb-411e-901e-fec376dc36da/automation-error-element-not-found-in-vb6-2147319765-after-upgrading-the-os
This forum is about VB.Net. If your question is about a VB6 project, have a look here:
Where to post your VB 6 questions
Armin
Similar Messages
-
Hi
I am getting this error when trying to start a VM in a Windows 2008 R2 Hyper-V ( all updated applied )
'vm-xx' could not initialize machine remoting system. Error: 'Element not found.'(0x80070490).
Does anyone experienced this error?
I found one update, KB967902 but it is for Windows 2008 Hyper-V not for R2
If this post is helpful, please mark it as such
Alessandro Cardoso
MVP | Microsoft Heroes | MCT
blog: http://itaustralia.spaces.live.com
http://cardosoalessandro.spaces.live.comHello
Alessandro,
I wrote about this error in the following KB and blog post.
Please let me know if they are helpful.
Error 2912 when a Virtual Machine Manager 2008 operation fails due to a certificate issue: "Element not found (0x80070490)"
http://support.microsoft.com/kb/971264
http://blogs.technet.com/b/mbriggs/archive/2009/05/08/vmm-operation-fails-with-error-2912-0x80070490-due-to-a-certificate-issue.aspx
Best Regards, Mike Briggs [MSFT]
– Posting is provided "AS IS" with no warranties, and confers no rights -
Error target not found base-level failed to install the packages
Im trying to install arch on my Virtualbox VM and its just returning:
error target not found base-level failed to install the packages to new root
What do I do? I have selected the right mirrors, pinging google, my own VPS's and a few other servers and they all pinged fine. Any ideas on whats up? Think my VPN's IP has been blocked and thats why I cant download anything? I have tried pacman -Ssy and it worked fine but still no.Please read the following and follow the advice included:
https://bbs.archlinux.org/viewtopic.php?id=57855
With that, be sure to clarify whether the typo was just here on the forum, or whether it was also in your original command. If it was in your original command, that would explain your results. -
SpryEffect Error, Element Not Found
Hello,
I am currently developing a web template which uses spry
effects. However I have noticed that on random occasions I
encounter a series of 4 errors. The first one states that an
element on my webpage is not found, the second one states that the
element null was not found, and then the other two just state that
the element null is full.
I have found that someone else had this problem, however the
persons answer did not help me out too much. I attempted to use his
solution, only to find it stopped the effects from occurring
entirely.
The URL to the webpage is
here.
Any help at all would be appreciated, thank you.Thank you for your help so far. It has helped considerably. I
only get one error instead of 4 now.
The exitEffect() function used to be there, but then I
started using a cookie to keep the bottom bar from performing the
entrance effects more than once per visit. I removed the function
but forgot to remove the references.
I also removed the effects that applied to the images on the
pages as they where unnecessary and wont be there on the actual
website.
I am however still getting the error, no matter how slow or
fast I click the links. Do you think it has anything to do with the
cookie I have set up? Its so the entrance effect only occurs once
per visit.
Also
This problem [
here]
is very similar to mine. I could not however make sense of the
answer given. Do you think there is any relevance there? -
Popup LOV returns not found on this server after upgrading to APEX 3.2
The Popup Key LOV (Displays description, returns key value) does not work after upgrading to APEX 3.2 from APEX 3.0.
Don't now if the character set is relevant.
The database character set on APEX 3.0 was:
NLS_CHARACTERSET: WE8MSWIN1252
DAD CHARACTERSET: WINDOWS-1252
APEX 3.2:
NLS_CHARACTERSET: AL32UTF8
DAD CHARACTERSET: UTF-8
When clicking on the popup the message is "The requested URL /pls/apex31mb/wwv_flow_utilities.gen_popup_list was not found on this server.".
This error applies for both Firefox and IE.Can't reproduce the error on apex.oracle.com, the popup works fine.
The only difference I notice on the environments is the database version (our: 10g, oracle.apex.com: 11g), but I can't see this have any influence. -
MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2
I am running a 2 node DAG with separate Hub & CAS servers
I have already upgraded the Hub CAS server and they are fine
Exchange running on Windows 2008 R2 SP1
All are in VM-Ware ESXi 5.0
After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
But again after reboot they do not start
Also I get the below event in the app log when the IS & SA fails to start
Log Name: Application
Source: MSExchangeIS
Date: 05/22/2012 5:15:03 AM
Event ID: 5003
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
configured and is currently online.
If I check the Registry for time resource it is taking from the DC
I manually compared the time between DC and Exchange and it is fine
Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
Checked for group policy and do not find any specific to time sync.
Confirmed that Windows Time service is running
Suspecting a Operating system issue, tried to upgrade the other DAG
Even that node is displaying the same symptom and Issues
Tried to install RU1 on both nodes and that too did not fix the issue.
Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
Is Anyone have come across the issue before ?Exchange 2010: Unable to initialize the Information Store
Problem:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either in the client or the server, and may require a reboot of that computer. Verify that
your domain is properly configured and is currently online.
Solution:
Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
Run this command
Net time \\ADServerName /Set
Restart the Microsoft Exchange Active Directory Topology Service
*Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work.. I tried just starting the Information Store service after running the command it it still failed..
This worked for me and all is well on my exchange server.
- See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf -
Element not found when trying to change url for httpstunnel
We use DirectAccess 2012 and Windows 7 is able connect via DirectAccess
Netsh dns show state
shows me that I have httpstunnel adapter with a url
According to the following article I should be able to change that url of the httpstunnel which we use for DirectAccess
https://technet.microsoft.com/en-us/library/dd941590%28v=ws.10%29.aspx#BKMK_4
However, when I use the following command
netsh interface httpstunnel set interface https://something.com:443/IPHTTPS none
I get the error "Element not found"
What am I doing wrong here?Hi Mister lks,
Regarding to your question, I’d suggest that we post at Direct Access, UAG and IAG forum. There you can get more effective suggestion by other experts who familiar with Direct Access. Your understanding is highly appreciated.
https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=forefrontedgeiag
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Javascript problem in IE 8 - Element not found
Hi guys,
My webapp developed in ADF 11.1.2 works very well in all browser, except the IE 8.0. In fact, there's one client IE8 who shows the problem, others none.
The error is:
Element not found
boot-SHERMAN-1147.js
http://servert:port/myapp/afr/partition/ie/default/boot-SHERMAN-1147.js
Line: 8274
Caractere: 5
Details:
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Carimbo de data/hora: Tue, 23 Aug 2011 16:51:15 UTC
Anyone could help me?chk this post..
Re: 11gp1 - JS Error in IE8 : Element not found boot-SHEPHERD-PS1-9296.js
and apply this patch to the windows registry..
http://www.winhelponline.com/articles/122/1/Error-Element-not-found-when-attempting-to-add-a-Search-Provider-in-Internet-Explorer-7.html
ie7tlbfix.reg hyper link under Attachments section. Download it and run. It should fix the issue.http://www.winhelponline.com/downloadattachment.php?aId=bb83eb194e9aa67c9432b90cb7ef9fbd&articleId=122 -
Windows 8 Pro Final (9200) BitLocker in UEFI mode not working, Element not found
Hi,
with the latest bios (either 1.37a (for Windows 8 Beta Driver test (June 2012) or 1.39 (Current) of the W520 and final release of Windows 8 Pro (Build 9200) BitLocker comes up with "Element not found" when trying to activate for the system drive in UEFI only mode.
In a new legacy only mode installation BitLocker works fine.
In both cases all devices in device manager are recognized. TPM 1.2 is active and working with e.g. the client security solution and fingerprint software.
I thought the UEFI / BitLocker issues have already been solved?!
Is there still an issue with the UEFI only mode of the W520?
Any thoughts or a bios update within sight?
Thx in advance,
nasenbaer
Solved!
Go to Solution.Haven't heard of this issue with Win8. The issue with Win7/UEFI/bitlocker from last year is definitely solved.
Does this link help?
http://social.technet.microsoft.com/wiki/contents/articles/11518.cannot-turn-on-or-resume-bitlocker-...
EDIT: I tried this just now with Win8 Pro on T420 (same BIOS code base as W520) in UEFI mode. And bitlocker works fine. So I'm sure what problem is happening on your W520. -
ISE Guest Portal - Error Resource not found
Hello,
When I create a guest user through the sponsor portal, then try to login with this guest user through the Guest Portal, after I press login button, the following error message occurs and do not know what to do to solve.
Error: Resource not found.
Resource: /guestportal/
None of the messages on the forum about it helped me to solve the problem.
I am using ISE 1.1.3.124 and this is a new re-image appliance.
Can anyone help?Hello,
As you are not able to get the guest portal, then you need to assure the following things:-
1) Ensure that the two Cisco av-pairs that are configured on the authorization profile should exactly match the example below. (Note: Do not replace the "IP" with the actual Cisco ISE IP address.)
–url-redirect=https://ip:8443/guestportal/gateway?...lue&action=cpp
–url-redirect-acl=ACL-WEBAUTH-REDIRECT (ensure that this ACL is also defined on the access switch)
2) Ensure that the URL redirection portion of the ACL have been applied to the session by entering the show epm session ip command on the switch. (Where the session IP is the IP address that is passed to the client machine by the DHCP server.)
Admission feature : DOT1X
AAA Policies : #ACSACL#-IP-Limitedaccess-4cb2976e
URL Redirect ACL : ACL-WEBAUTH-REDIRECT
URL Redirect :
https://node250.cisco.com:8443/guestportal/gateway?sessionId=0A000A72
0000A45A2444BFC2&action=cpp
3) Ensure that the preposture assessment DACL that is enforced from the Cisco ISE authorization profile contains the following command lines:
remark Allow DHCP
permit udp any eq bootpc any eq bootps
remark Allow DNS
permit udp any any eq domain
remark ping
permit icmp any any
permit tcp any host 80.0.80.2 eq 443 --> This is for URL redirect
permit tcp any host 80.0.80.2 eq www --> Provides access to internet
permit tcp any host 80.0.80.2 eq 8443 --> This is for guest portal
port
permit tcp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8906 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
deny ip any any
Note:- Ensure that the above URL Redirect has the proper Cisco ISE FQDN.
4) Ensure that the ACL with the name "ACL-WEBAUTH_REDIRECT" exists on the switch as follows:
ip access-list extended ACL-WEBAUTH-REDIRECT
deny ip any host 80.0.80.2
permit ip any any
5) Ensure that the http and https servers are running on the switch:
ip http server
ip http secure-server
6) Ensure that, if the client machine employs any kind of personal firewall, it is disabled.
7) Ensure that the client machine browser is not configured to use any proxies.
8) Verify connectivity between the client machine and the Cisco ISE IP address.
9) If Cisco ISE is deployed in a distributed environment, make sure that the client machines are aware of the Policy Service ISE node FQDN.
10) Ensure that the Cisco ISE FQDN is resolved and reachable from the client machine.
11) Or you need to do re-image again. -
Oracle Certification Page Error - Page Not Found (404)
Hello,
I'm experiencing the following problem: can not access the certification section on oracle site:http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=39
I receive the following error:
Page Not Found (404)
We're sorry! The page you are looking for has been moved or no longer exists.
Please check the current status page first before logging an SR to AITSYS WEB SERVICES group
or Calling the HelpDesk and provide the following information along with steps to reproduce the issue:
Page Not Found Error 404 on Thursday, 23-Oct-2008 01:54:56 PDT amts498.oracle.com (141.146.13.151)
Does anyone have the same problem?I am sorry, but I am not able to replicate your issue. The page is working fine for me. Perhaps you could contact OU technical support. Are you also having trouble getting to page tihs page http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=3?
You can find OU technical support numbers on this page http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=123. There are also certification email addresses, but they will not be able to assist with technical problems with the website. The Oracle Certification Program Website is a part of the Oracle University website, so this is probably a bigger problem that you are having with the OU site.
Regards,
Brandye Barrington
Certification Forum Moderator
Certification Program Manager -
ORA-12709: error while loading create database character set after upgrade
Dear All
i m getting ORA-12709: error while loading create database character set, After upgraded the database from 10.2.0.3 to 11.2.0.3 in ebusiness suit env.
current application version 12.0.6
please help me to resolve it.
SQL> startup;
ORACLE instance started.
Total System Global Area 1.2831E+10 bytes
Fixed Size 2171296 bytes
Variable Size 2650807904 bytes
Database Buffers 1.0133E+10 bytes
Redo Buffers 44785664 bytes
ORA-12709: error while loading create database character set
-bash-3.00$ echo $ORA_NLS10
/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_BASE=/u01/oracle
export ORACLE_HOME=/u01/oracle/PROD/db/tech_st/11.2.0
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/perl/bin:$PATH
export PERL5LIB=$ORACLE_HOME/perl/lib/5.10.0:$ORACLE_HOME/perl/site_perl/5.10.0
export ORA_NLS10=/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_SID=PROD
-bash-3.00$ pwd
/u01/oracle/PROD/db/tech_st/11.2.0/nls/data/9idata
-bash-3.00$ ls -lh |more
total 56912
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx00001.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00002.nlb
-rw-r--r-- 1 oracle oinstall 959 Jan 15 16:05 lx00003.nlb
-rw-r--r-- 1 oracle oinstall 984 Jan 15 16:05 lx00004.nlb
-rw-r--r-- 1 oracle oinstall 968 Jan 15 16:05 lx00005.nlb
-rw-r--r-- 1 oracle oinstall 962 Jan 15 16:05 lx00006.nlb
-rw-r--r-- 1 oracle oinstall 960 Jan 15 16:05 lx00007.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00008.nlb
-rw-r--r-- 1 oracle oinstall 940 Jan 15 16:05 lx00009.nlb
-rw-r--r-- 1 oracle oinstall 939 Jan 15 16:05 lx0000a.nlb
-rw-r--r-- 1 oracle oinstall 1006 Jan 15 16:05 lx0000b.nlb
-rw-r--r-- 1 oracle oinstall 1008 Jan 15 16:05 lx0000c.nlb
-rw-r--r-- 1 oracle oinstall 998 Jan 15 16:05 lx0000d.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx0000e.nlb
-rw-r--r-- 1 oracle oinstall 926 Jan 15 16:05 lx0000f.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00010.nlb
-rw-r--r-- 1 oracle oinstall 958 Jan 15 16:05 lx00011.nlb
-rw-r--r-- 1 oracle oinstall 956 Jan 15 16:05 lx00012.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx00013.nlb
-rw-r--r-- 1 oracle oinstall 970 Jan 15 16:05 lx00014.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00015.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00016.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00017.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00018.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00019.nlb
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx0001a.nlb
-rw-r--r-- 1 oracle oinstall 944 Jan 15 16:05 lx0001b.nlb
-rw-r--r-- 1 oracle oinstall 953 Jan 15 16:05 lx0001c.nlb
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
ORACLE_HOME = /u01/oracle/PROD/db/tech_st/11.2.0
System name: SunOS
Node name: proddb3.zakathouse.org
Release: 5.10
Version: Generic_147440-19
Machine: sun4u
Using parameter settings in server-side spfile /u01/oracle/PROD/db/tech_st/11.2.0/dbs/spfilePROD.ora
System parameters with non-default values:
processes = 200
sessions = 400
timed_statistics = TRUE
event = ""
shared_pool_size = 416M
shared_pool_reserved_size= 40M
nls_language = "american"
nls_territory = "america"
nls_sort = "binary"
nls_date_format = "DD-MON-RR"
nls_numeric_characters = ".,"
nls_comp = "binary"
nls_length_semantics = "BYTE"
memory_target = 11G
memory_max_target = 12G
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl01.dbf"
control_files = "/u01/oracle/PROD/db/tech_st/10.2.0/dbs/cntrl02.dbf"
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl03.dbf"
db_block_checksum = "TRUE"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_dest_1 = "LOCATION=/u01/oracle/PROD/db/apps_st/data/archive"
log_archive_format = "%t_%s_%r.dbf"
log_buffer = 14278656
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
db_files = 512
db_file_multiblock_read_count= 8
db_recovery_file_dest = "/u01/oracle/fast_recovery_area"
db_recovery_file_dest_size= 14726M
log_checkpoints_to_alert = TRUE
dml_locks = 10000
undo_management = "AUTO"
undo_tablespace = "APPS_UNDOTS1"
db_block_checking = "FALSE"
session_cached_cursors = 500
utl_file_dir = "/usr/tmp"
utl_file_dir = "/usr/tmp"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/PROD_proddb3"
utl_file_dir = "/usr/tmp"
plsql_code_type = "INTERPRETED"
plsql_optimize_level = 2
job_queue_processes = 2
cursor_sharing = "EXACT"
parallel_min_servers = 0
parallel_max_servers = 8
core_dump_dest = "/u01/oracle/PROD/db/tech_st/10.2.0/admin/PROD_proddb3/cdump"
audit_file_dest = "/u01/oracle/admin/PROD/adump"
db_name = "PROD"
open_cursors = 600
pga_aggregate_target = 1G
workarea_size_policy = "AUTO"
optimizer_secure_view_merging= FALSE
aq_tm_processes = 1
olap_page_pool_size = 4M
diagnostic_dest = "/u01/oracle"
max_dump_file_size = "20480"
Tue Jan 15 16:16:02 2013
PMON started with pid=2, OS id=18608
Tue Jan 15 16:16:02 2013
PSP0 started with pid=3, OS id=18610
Tue Jan 15 16:16:03 2013
VKTM started with pid=4, OS id=18612 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Tue Jan 15 16:16:03 2013
GEN0 started with pid=5, OS id=18616
Tue Jan 15 16:16:03 2013
DIAG started with pid=6, OS id=18618
Tue Jan 15 16:16:03 2013
DBRM started with pid=7, OS id=18620
Tue Jan 15 16:16:03 2013
DIA0 started with pid=8, OS id=18622
Tue Jan 15 16:16:03 2013
MMAN started with pid=9, OS id=18624
Tue Jan 15 16:16:03 2013
DBW0 started with pid=10, OS id=18626
Tue Jan 15 16:16:03 2013
LGWR started with pid=11, OS id=18628
Tue Jan 15 16:16:03 2013
CKPT started with pid=12, OS id=18630
Tue Jan 15 16:16:03 2013
SMON started with pid=13, OS id=18632
Tue Jan 15 16:16:04 2013
RECO started with pid=14, OS id=18634
Tue Jan 15 16:16:04 2013
MMON started with pid=15, OS id=18636
Tue Jan 15 16:16:04 2013
MMNL started with pid=16, OS id=18638
DISM started, OS id=18640
ORACLE_BASE from environment = /u01/oracle
Tue Jan 15 16:16:08 2013
ALTER DATABASE MOUNT
ORA-12709 signalled during: ALTER DATABASE MOUNT...ORA-12709 signalled during: ALTER DATABASE MOUNT...Do you have any trace files generated at the time you get this error?
Please see these docs.
ORA-12709: WHILE STARTING THE DATABASE [ID 1076156.6]
Upgrading from 9i to 10gR2 Fails With ORA-12709 : Error While Loading Create Database Character Set [ID 732861.1]
Ora-12709 While Trying To Start The Database [ID 311035.1]
ORA-12709 when Mounting the Database [ID 160478.1]
How to Move From One Database Character Set to Another at the Database Level [ID 1059300.6]
Thanks,
Hussein -
Error in installing windows 2008 r2 sp 1 element not found
error in installing windows 2008 r2 sp 1 element not found
Hi,
As Akash G says, would you please let us know the complete error message or provide a screenshot? It will help
us to go further.
In addition, would you please let me confirm whether install the Windows Server 2008 R2 Service Pack 1 via
Windows Update, or download the installation package and then install manually?
Please refer to the following article and check if can help you to solve this issue.
The error 0X80070490(Element not found) when you are installing a service pack or update
http://blogs.technet.com/b/asiasupp/archive/2011/06/20/the-error-0x80070490-element-not-found-when-you-are-installing-a-service-pack-or-update.aspx
By the way, you can also install the Service Pack 1 in
Clean Boot mode manually. Then please check if install successfully.
Hope this helps.
Best regards,
Justin Gu -
11gp1 - JS Error in IE8 : Element not found boot-SHEPHERD-PS1-9296.js
Hi,
I started to get this JS error when I run my ADF applications in IE8. This happens on my PC. I tried clearing cache etc but it didn't help..
It happens even for one page test applications when click a button or link on the page..It works fine with firefox..
Does anyone have any idea ?
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; InfoPath.2; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152)
Timestamp: Fri, 7 May 2010 14:27:17 UTC
Message: Element not found.
Line: 5636
Char: 2
Code: 0
URI: http://127.0.0.1:7101/Application9-ViewController-context-root/afr/partition/ie/default/opt/boot-SHEPHERD-PS1-9296.jsThank you, Muhammed.
Yes...
I'm trying with firefox (everything ok), Safari (ok), Chrome (ok), Opera (not supported for Faces), IE7 and IE8 (supported in compatibility mode).
According to this this , it should be supported and certified to run on IE7, but it returns this funny error, related to Javascript. As far as I could guess, it has to do with the Flash properties of faces.
I've tried with 2 different pages:
- the first one contains an ADF DVTGraph and, then, it returns this error when loading.
- the second one contains Panel Accordion (these ones embedded that get minimized when you click on another). This behaviour is Flash, i think, because it is in this moment when it returns the error and not when it is loading.
I don't know if I did mysefl clear... :)
Did you uninstall IE8 and then you tried with IE7 an it worked?? Did you render any DVT component?
I'm incredibly puzzled with this.... Any Idea??
Edited by: juan.aleixandre on 19-may-2010 1:11 -
I am trying to download the trial of PSE 13 which consists of two files. The first downloads ok but on the second I get this message:
Downloading Adobe Photoshop Elements 13 MultipleLanguages Windows
The Akamai Download Manager has encountered an fatal error: File not found.
Same thing happens if I try to download the files individually and also in different browsers. Any ideas?Me three. I have been trying for hours, and have used three different browsers.
I have just noticed that the URL it is trying to use is looking for ...win32.exe under a directory called win64. That sounds like a stupid typo mistake. I manually modified the URL to this instead (and it downloaded something)...
http://trials3.adobe.com/AdobeProducts/PSE/13/win32/PhotoshopElements_13_LS25_win32.exe
Now I just need to figure out how to install the product manually using the two downloaded files!?!
Maybe you are looking for
-
Problem in WEB-UI field (Not Bound)
Hi Experts, I am new to CRM Technical, I have added new standard field (Date Of Birth) thourgh component work bench 'BSP_WD_CMPWB' in 'Z_IC_AGENT' business role. after execution this business roles i could able to see this DOB field but its showi
-
I Don't know what to do!? Can anyone PLEASE help me!?
My iPod mini, 4gb is hard to get serviced obviously because they dont make them anymore. Lately ive noticed that my bettery life has decreased so much that i dont even bother taking it out of the ac adapter that is in my outlet. instead of the sugges
-
Itunes for windows 8 does not show toolbar and I can't change settings
I just downloaded iTunes for Windows 8 and there is no tool bar. I want to change settings but don't know how. What do I do?
-
Internal speakers and audio output gone from System preferences
i can't get macbookpro 2010 to recognize internal speakers and audio output. only optical OUTPUT. CAN'T GET ANY SOUND EXCEPT FOR OPTICAL PORT
-
I bought before some days an occasion iphone 5, but always when I like to create an icloud account, in final of the process, it appears a message like that "This device (iphone) is not allowed to create a free icloud". what I must do?