Automation still not insync even Logic X

Hello everyone.
Does anyone happen to know why the automation is not in sync with the audio/ nor the bar/beats
The problem was in Logic 9 and perhaps earlier too, but I thought they had done little better with logic X - but nope.
When I draw automation lets say for example a HighCut to 74Hz and I want it to open on the 1st 1/4 of bar 124 I must draw the automation to open in 124.1.4 in order it to be synced with audio (that the hicut does not open too early)
Why is this like this?
is there something to do with plugin dly compensation - that would really make it hard to draw precise automation..
answers tips, points.. everything is welcome..
-lauri

Sounds like it might be the same problem as this:
https://discussions.apple.com/thread/2367218?start=0&tstart=0
"go to:
Preferences / Audio / General, and set Sample Accurate Automation to Volume, Pan, Sends, Plugin Parameters"

Similar Messages

Calendar reminders (notifications) still NOT working, even after 602 update.....

So, Verizon Wireless released the 602 update to the Gingerbread OS for the Droid X, and the calendar reminder popups (notifications) are still NOT working properly.
This is VERY frustrating, as I use these notifications (reminder pop ups) for everything from business related (meetings, etc) to personal (when to take medicines, etc).
It's also VERY frustrating because BEFORE Gingerbread, when the Droid X ran Froyo, there was NOT a problem with the calendar and its reminders.
I would assume that there are MANY, MANY people being affected by this issue...and I wonder why Verizon hasn't "put the heat" on Google to FIX this issue which is clearly related to the Android OS, more specifically, Gingerbread.
I used to like the Droid X very much, but now I'm counting the days until I can get an iPhone. At least you know what you're getting, and won't have an update "break" functions of the phone.
So, Verizon, if you're listening... PLEASE get this calendar notification problem FIXED.
Thank you!!

I'm the original poster of this topic. And let me tell you the steps that I went through to try to get this resolved, and then I'll let you know the ultimate solution that I wound up doing and am happy about (but am NOT happy about Verizon & Motorola).
1) updated DroidX to latest 602 update.
2) went into admin partition and deleted cache
still did not work
3) went into admin partition and did hard reset (complete restore) from inside the admin partition
Still did not get calendar reminders to work.
4) went into normal phone and accessed "Restore Phone to Factory Specs" from the Privacy menu in settings. This caused the phone to do a similar hard reset as in step 3, except it also ran the beginning software (welcome to your Droid, we now have to activate your phone, etc).
Calendar reminders did not work. (REMEMBER... when I say they did not work, I mean that the reminders would go off EVENTUALLY , but anywhere from 30mins AFTER the appointment to literally HOURS AFTER the appointment).
5) Created a COMPLETELY NEW AND DIFFERENT calendar at Google under a DIFFERENT screen name/account. Configured DroidX to completely forget the original calendar and to start using the NEW one.
Reminders still did NOT work properly.
6) Once again, tried hard resets.
NOPE. Still did NOT work.
7) CALLED Verizon Wireless and described my problem and they pretty much didn't/couldn't help and said they would "send a report to the engineering team" about the problem.
And HERE is the thing that REALLY BURNED ME UP about this WHOLE ENTIRE DEBACLE..... my DroidX worked 100% correctly BEFORE the Gingerbread upgrade to the Android OS. When it was running Froyo (previous OS), every single calendar reminder on my original calendar worked every single time, on time, every time. BUT... AFTER Gingerbread, it just didn't work. (Don't get me started with the phantom powering on of the phone after it was powered off problem that STILL exists after the 602 upgrade).
SO.......... what did I eventually do??? Well, by this time, I was eligible for early upgrade at upgrading pricing and switched to the iPhone4 (I didn't want the 4S). AND YOU KNOW WHAT??? Using the ORIGINAL GOOGLE calendar that I used before all the above stuff happened, my reminders on the iPhone4 work all the time, every time. These include appointments that I made 8 months ago to new ones that I make every day. And for all of them, the iPhone4 sets the reminder chime off EXACTLY when I want it to.
Now, I realize that this doesn't address the problem for you, Ganamide (who wrote above), but for me, I finally got to the point where I had missed critical appointments with clients and couldn't wait around for the DroidX Calendar Reminder Problem to be resolved.
So Verizon Wireless and Motorola (maker of DroidX) and Google (maker of Android OS) all have "negative points" in my book for allowing such a problem to continue without proper resolution. Apple, on the other hand, gets "positive points" in my book for making a product that is rock solid and works well.

Lightroom CC still not open even I signed back in or change permission of delete plist file.

I have just update to Lr CC
uninstall Lr5.7 by 3rd party app
then i cannot open to Lr CC (just flash screen appear)
I've already signed out from CC then signed in back
remove Plist file from preferences folder and changed permission too
How Can I do next? it's still not work

Hi There,
Kindly try Solution 2 from the link mentioned below.
"Unknown Server Error" | Log in to Creative Cloud
2. If you are still not able to activate it, please contact our support team via: http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
If you are unable to use chat option kindly try below mentioned steps.
Try different browser.
Delete cookies and cache
If the problem still persists Kindly revert with the below mentioned information.
OS version:
Browser Version:
You can also try:http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Thanks,
Atul Saini

Lightroom is still not working even after spending several hours on the phone w/ adobe. Suggestions?

At first, the issue was that we had to type the serial number in every time we used Lightroom. Now, we cannot even get Lightroom to turn on even after typing in our serial number. All we want to do is edit our pictures. How do we get Lightroom to work. I've called adobe a few times and literally spent hours on the phone with them trying different things to get it to work. Still no Lightroom. Any suggestions?

Which version of Lightroom? Which operating system?

IPOD STILL NOT WORKING EVEN AFTER SERVICE

Hi,
I can't belive this. I sent my ipod off for service because my ipod had a problem with its battery. The ipod would cut off when the indicator showed 1/2 full this happened about an hour into play. Yes the battery life was only about an hour.
So when i got it back I was so glad but I've just been using it and the problem still persists. I have tried the battery test and the ipod fails this test.
I cannot understand why apple has sent me my ipod back unchanged. I paid £180 for my first generation mini and at the moment it is almost useless as I have to constantly charge the battery up.
Can anyone give me some advise??? Thank You For Your Time

Did you get an email adress or phone numer for someone to complain too? I got 2 ipods. One broke sometime ago and we go a replacment and now both of them are broken. (Its not my PC, I use a Sony MP3 and it works fine). It is the lack of customer service that is bugging me. I have been trying to call Apple or an Apple store for days. Totally rubbish. My daughter threw her ipod out today!!! If you get a UK phone number or amail address please let me know. Cheers

Copy and paste are still not working even after many workarounds

This usually happens to me randomly. I would say that there is about a 25% chance that my paste works. The copy function seems to work, but when it comes to pasting, my browser does not offer the pasting button and it stays invisible. I have disabled my firewall, disabled my antivirus, resat firefox, started in safemode, disabled all plugins, and even uninstalled and reinstalled java. I have tried everything. This is definitely a browser problem because I am able to copy and paste in any other application with out any problem. I don't like any other browser so I refuse to do so. Please help me firefox team.

Why yes it was in fact Zonealarm's problem. Thank you very much for your answer. I will now inform Zonealarm about this issue.

Back to My Mac still not working even after updating to 10.5.1

Updated to 10.5.1 on 2 machines. each machine is is in a different house but both on Verizon DSL using Westell Versalink modem/routers models 327W A90-327W15-06 with UPNP Enabled on both.
Still nothing
they work fine when in the same house on the same network but as soon as I move one to another house on a DSL account of it's own they don't see each other anymore.
Verizon isn't much help with firmware updates for the modem/routers either. If I could talk to somebody that speak english it may be more helpful but so far no luck.
Anyone having luck with Verizon DSL and this stil modem/router?

My suggestion is to see if Verizon will let you treat the modem as a simple modem and attach your own router to it.
I've found these Westells a pain to setup, and it took me once 2 hours to get through to a Mac specialist on Verizon's end to finally get the right setup on a customer's machine. I don't know that customer's number anymore unfortunately since this was a couple years ago.
Message was edited by: a brody

PDF still not converting even after all advice from forum

Hello, I am trying to convert a PDF using Adobe Export PDF, the file is 8.6mb, when I click to convert it says "file failed to convert using Adobe Export PDF online" I tried disabling recognised text, still didn't work. Followed the link to the ExportPDF web interface, it says export complete so I save, however when you click it says 'internet explorer has stopped working' and it closes the programme. It says in Properties- Applications...and then it's blank. After PDF producer it says Acrobat Distiller 7.0 (windows) . I have comverted 7 other files in the same series, some of which are bigger, however there is just won't convert. Please help....

Hi Sean,
Sorry to hear you're having trouble!
Could you try the steps outlined in this document: http://forums.adobe.com/docs/DOC-1831 ?
After going through those steps, try converting from the ExportPDF web interface again.
Let us know how it goes!
-David

Attachments still not opening even after new September Update??

I hope someone might be able to shed some light on this. After the new update I sent myself some word, excel, pdf attachments thinking to try the tilt/landscape feature in viewing attachments, but nothing. The attachment still shows up as a bar with the file name, but nothing happens when I click on it, as the intro video on Apple said to click on it and the attachment should open and you can see them in landscape mode?? Anyone else having this problem, all the other updates were succefully downloaded.
SK

I hope someone might be able to shed some light on this. After the new update I sent myself some word, excel, pdf attachments thinking to try the tilt/landscape feature in viewing attachments, but nothing. The attachment still shows up as a bar with the file name, but nothing happens when I click on it, as the intro video on Apple said to click on it and the attachment should open and you can see them in landscape mode?? Anyone else having this problem, all the other updates were succefully downloaded.
SK

Passbook is still not working even I manually set up time

Hey guys,
I tried resetting my time back to 2011 and opened passbook again. After entering App store from passbook, the App store still said it cannot connect to it. Is there any other method to make it work? Please help me! Thanks!

If your printer is already connected to your router, skip the step of pressing the wireless light.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT201274 Facetime is still not working even after restore and all other troubleshooting is performed

Tried restoring and all other troubleshooting and still cannot obtain Facetime on my phone - have others had this problem and if so how di you resolve the problem? Please help.

Which version of Lightroom? Which operating system?

Updated to ios6 lost wifi still not working even after resetting networks?

I've tried resetting the networks and changing the HTTP proxy to auto but no iphone users in my office have wifi connectivity after updating.

My suggestion is to see if Verizon will let you treat the modem as a simple modem and attach your own router to it.
I've found these Westells a pain to setup, and it took me once 2 hours to get through to a Mac specialist on Verizon's end to finally get the right setup on a customer's machine. I don't know that customer's number anymore unfortunately since this was a couple years ago.
Message was edited by: a brody

3.1EA2 bug still not fixed - Members of package body not listed in the tree

Hi, I was working today with SQL Developer again and found that this bug is still not fixed even when it was reported more than 1 year ago!!!
I did a quick search and found it here
Package Body Tree not always showing
The problem is when you expand the package specification or package body tree, not all members of the specification/body are listed. This is mostly observable in the package body, but it regards to the specification as well.
Consider this case:
CREATE TABLE EMP (
    ID               NUMBER(6,0) DEFAULT 0,
    NAME             VARCHAR2(20 BYTE) DEFAULT NULL,
    DEPT             VARCHAR2(20 BYTE) DEFAULT NULL,
    FUNCTION         VARCHAR2(20 BYTE),
    PROCEDURE        VARCHAR2(20 BYTE));
CREATE TABLE LOOP (
AREA    VARCHAR2(5),
VALUE   VARCHAR2(2));
CREATE OR REPLACE PACKAGE Test_Package1 AS
gvc_const CONSTANT VARCHAR2(10) := 'xxx';
PROCEDURE Test(p_RC OUT NUMBER,
               p_ID IN NUMBER);
END Test_Package1;
CREATE OR REPLACE PACKAGE BODY Test_Package1 AS
PROCEDURE Test(p_RC OUT NUMBER,
               p_ID IN NUMBER)
IS
BEGIN
--INSERT INTO EMP (ID, NAME, DEPT, PROCEDURE) VALUES (1, 'Tina', 'xxx', 'xxx');
--INSERT INTO EMP (ID, NAME, DEPT, FUNCTION) VALUES (2, 'Jeff', 'xxx', 'xxx');
--INSERT INTO LOOP(AREA, VALUE) VALUES('a','b');
NULL;
END;
END Test_Package1;Compile the package specification and the body. Expand the spec + body in the tree. Uncomment any of the commented lines in the package body and compile the body again. Now expand the package body again and look what is displayed.
Why? It is because SQL Developer handles words "Function", "Procedure" and "Loop" as keywords and according to them does the parsing.
Another case
CREATE OR REPLACE PACKAGE Test_Package1 AS
gvc_const CONSTANT VARCHAR2(10) := 'xxx';
TYPE Loop_rec IS RECORD(
item1   LOOP.AREA%TYPE);
PROCEDURE Test(p_RC OUT NUMBER,
               p_ID IN NUMBER);
END Test_Package1;Compile just this specification and try to expand it in the tree. Again, during parsing the package, SQL Developer takes the word "LOOP" into consideration and fails to parse the specification.
There is exactly the same problem when you declare functions from external dll libraries in package body. Since there is no "END;" in this case, SQL Developer's parser fails...
To me it seems you simply blindly took some keywords like "FUNCTION" and expect there will be some "END;" keyword corresponding with it.
Can anyone have a look at this and finally fix it?

Hi,
Thanks for trying out SQL Developer 3.1 EA2 and providing a clear, reproducible test case for this issue. I logged an internal bug for it:
Bug 13438696 - 3.1EA2: FORUM: CERTAIN KEYWORDS IN PKG BODY BLOCK MEMBERS FROM CONN VIEW TREE
It seems the bug noted in the other forum thread you reference has been fixed, but really had nothing to do with problems discussed either here or there. That fix involved adding an Edit Body... item to the Package context menu in the Schema Browser, not displaying Package members correctly in the Connection view tree.
Regards,
Gary
SQL Developer Team

Accidentally deleted x protect meta.plist and plug in not working even after downloading latest

Hi all
Need some help here. It started off like this - after upgrading to mavericks, i had a problem viewing some java stuff. Googled and read somewhere to delete the x protect meta.plist and thus, did so. After doing that, my youtube videos etc all couldnt work. So googled again and did whatever the rest suggested - download latest version of Java, uninstall java and reinstall again, install other versions of java etc etc. all didnt worked.
Someone just pointed out that I had deleted a very critical security file (x protect meta.plist) and might have more problems that I thought on my hand.
Im not very technical or IT saavy, so please kindly advise. Most of the problems surfaced after deleting that file. And right now, plug in for videos are still not working even though I have attempted various 'solutions' suggested in this forum (the not too technical ones) and java is still cranky. Pls advise. thanks!

Anyone able to help?
1) How did u solve the missing/out of date plugin?
- Have tried installing numberous times the latest version - doesnt work
- Tried uninstalling and then reinstalled earlier versions of java - doesnt work too
read somewhere to delete the xprotect meta plist - realised much later that piece of advice was for snow leopard OS and thus, did not work too. A forummer told me today this file is a critical security file and i should not have deleted it. WHat can I do now?
current situation:
still cant play youtube videos and other videos.
java on some sites still cant work

Even though block popup windows is unchecked in content tab of options, I am still not getting any popups. Please help me.

Hi - Even though block popup windows is unchecked in content tab of options, I am still not getting any popups. Please suggest how to over come this problem.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Did you make sure that your security software isn't blocking the pop-ups?
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

Automation still not insync even Logic X

Similar Messages

Maybe you are looking for