Automator errors under Snow Leopard

Hi everyone,
Since upgrading my MacBook to Snow Leopard (I have the latest 10.6.3 update), Automator behaves very erratically. The window ‘AppleScript Error; The result of a numeric operation was too large. (-2702)’ pops up frequently at various stages of opening, using, or modifying my workflows previously created under Leopard.
I still get this erratic behavior even if I try to remake my workflows from scratch in Snow Leopard. Even stranger is that I can get a workflow to behave fine for a little while, and then it starts getting crazy again. Some Automator actions (Rename Finder item, Get Specified URLs, Run Applescript) seem to be especially prone to triggering the error.
This problem is general and very annoying, and I was thus surprised to find very few threads about this issue when I searched the Apple forums (assuming I searched correctly) or using Google.
Because of this issue, I have refrained from upgrading my Mac Pro to Snow Leopard, while waiting for future updates to hopefully fix the problem (which hasn’t happened so far).
Did anyone else encounter this problem, and if so, how do you solve it?
Any hint would be much appreciated.

I was loosing hope for a solution. But running Automator in 32-bit mode does work! Thank you Lupus42.
Now I can dare to install Snow Leopard on my Mac Pro. But because of this Automator error story, I’m still anxious about making the transition. So I’ll seek the safest way to try Snow Leopard. I know I can reinstall Leopard if Snow Leopard still causes me trouble, but I’d prefer not to mess with my current system at all. I’ve heard you can upgrade a disk image of your system instead, or create a new partition on your disk. I don’t know if these options are actually feasible and better, but I’d to explore these alternatives before altering my current system. Maybe I’ll start a new thread about this if needed.
Thanks everyone for sharing your similar problems (and showing me I wasn’t crazy) and your solution to the problem.

Similar Messages

  • Automator error and Snow Leopard

    In Snow Leopard's Automator, I'm getting an error that says my Automator actions are not Universal, which is incorrect, since they are certainly Universal Binaries.
    However, after doing some research, I've found other similar cases, and it seems that this error is misguiding, and that the Automator actions just have not been compiled to be 64-bit yet. From my quick glance in Xcode, however, if I want to make a 32/64-bit UB Action, it is only compatible with Mac OS 10.5 and above. Am I wrong in my assumption? Might it be possible to build appropriate versions of the Automator actions that will work with Mac OS 10.4 through 10.6?

    My concern is how feasible is it to get a 32+64-bit and PPC/Intel hybrid Automator Action that can run on Mac OS 10.4 - 10.6.
    Apple has this to say about that...
    -=-=-=-
    Automator Actions as Universal Binaries
    A universal binary is executable code that can run on either PowerPC-based or Intel-based Macintosh computers.
    To move a PowerPC-only project to a universal-binary project may require work involving such programming details as endianness, alignment, and calling conventions. The amount of work generally depends on the level of the source code; lower-level source code (for example, the kernel) requires more work than higher-level code (for example, an application based on Carbon).
    The need to make an Automator action a universal binary depends on the language used:
    ■ AppleScript actions are platform-independent and do not require any changes to run on Intel processors.
    ■ An action that contains Objective-C code, whether a Cocoa-only action or an action that contains a mix of Objective-C and AppleScript, must be built as a universal binary to run correctly on both Intel and PowerPC processors.
    For information on making universal binaries, see 'Universal Binary Programming Guidelines, Second Edition'.

  • HP Officejet Pro 8500 Wireless Won't Scan Under Snow Leopard

    After installing Snow Leopard, my new HP Officejet Pro Wireless 8500 all-in-one printer won't scan. It delivers the following error message: "No Scan Options - refer to device documentation".
    Also, when I attempted to check and adjust scan settings using HP's Scan Destinations program, that program hangs and cannot save any setting changes. Then I have to use "Force Quit" to stop the program from hanging up while saving.
    HP's software update reports the printer software is up to date.
    It appears there are a ton of printer problems appearing for people after installing Snow Leopard, but I sure would appreciate any help on solutions if someone also has this problem.
    Thanks much.

    I also just tried connecting my 8500 wireless printer directly via usb and then downloading the HP printer drivers from Apple downloads and reinstalling.
    The install hangs nearly forever on the final step, but eventually says the driver install was successful. However, then when connected via usb, I am unable to print. Printing works when you reconnect via the wireless on the 8500.
    So connecting via usb and reinstalling HP printer drivers does not solve the issue. And it's puzzling, because the list of supported printers under Snow Leopard lists the Officejet Pro8500 Wireless as supporting both printing and scanning.
    Somebody has it wrong.
    If this scanning problem continues very long, I may be forced to uninstall Snow Leopard, because my printer is brand new.

  • HP OfficeJet Pro 8500 Wireless second paper tray under Snow Leopard

    He there, I have a strange problem with the second (extra) paper tray from the Office Jet Pro 8500. I have setup the tray and activated the option on the driver page on the computers, but no results. No paper is loaded from the tray and there is an error that no paper is loaded in the machine. The printer is connected via ethernet (and a time machine) and I am running snow leopard on all the machines that are connected to the printer. I have installed the latest drivers from Apple and from HP. I know that the paper tray is working, because when I make a copy on the machine localy and force him to use papertray number 2, then there is no problem.
    Does anybody have the same problem?? Thanks

    I also just tried connecting my 8500 wireless printer directly via usb and then downloading the HP printer drivers from Apple downloads and reinstalling.
    The install hangs nearly forever on the final step, but eventually says the driver install was successful. However, then when connected via usb, I am unable to print. Printing works when you reconnect via the wireless on the 8500.
    So connecting via usb and reinstalling HP printer drivers does not solve the issue. And it's puzzling, because the list of supported printers under Snow Leopard lists the Officejet Pro8500 Wireless as supporting both printing and scanning.
    Somebody has it wrong.
    If this scanning problem continues very long, I may be forced to uninstall Snow Leopard, because my printer is brand new.

  • Font problem with MX under Snow Leopard

    Anybody know what might cause an app built with Director MX not to display an installed (not embedded) custom font under Snow Leopard?
    The program was built quite some time ago but was tested under previous Mac OS X.x versions and worked fine. What might have changed that could cause this problem?
    Complicating this is that I don't have Snow Leopard myself to test it directly, but here's what I do know:
    The font is definitely installed and available to other apps.
    Everything else about the app works fine.

    I noticed the same jumbled text problem.
    When I went to look at Font Book, I see that those fonts are no longer installed. It must've happened when I loaded Snow Leopard last weekend.
    Anyway, I went to reinstall fonts, and I see I've got a bunch that got uninstalled. But when I try to reinstall them, like Calisto and Caligula to name the first couple I tried, Font Book reports that there were serious errors when trying to load them.
    Does anyone have insights into the vague message: "System Validation" as the serious problem? I don't see a way to get more details about the problem than that.

  • Front Row Incorrectly Reads iTunes Metadata under Snow Leopard?

    There is a serious problem with Front Row under Snow Leopard. The program is unable to correctly read the TV metadata from iTunes and does not correctly filter/organize the data. TV episode/season/title data is not read resulting in a completely disorganized library. All files are viewd as "movies" whether they have been tagged as TV shows or not. I had a sizable libray of videos that was perfectly organized under Tiger. Under Snow Leopard my entire database has been blown up- most TV shows appear as "Untitled". I'm sure they are MacMini users who have integrated their computers into their media playback systema s I have and am hoping Apple will provide a fix for this issue which totally undercuts one of the main reasons for integrating the Mini into one's home theatre system. Does any have a fix or simple work around. Come on Apple-- don't turn into Microsoft on me!

    I recently purchased a used iMac (from 2006), that the previous owner had upgraded to Snow Leopard. I already have a MacBook Pro. To explain, I purchased the iMac to set it up as a media center computer, connected to my external hard drive and synced with AppleTV. I used Migration Assistant to move my files onto the iMac, but Front Row is now showing all the errors you described.
    1. It is VERY slow to open. Clicking Menu on the remote, and you wait 15 seconds or more for Front Row to open.
    2. Even though iTunes is directed to my external hard drive, Front Row shows Source as my Macbook Pro.
    3. TV shows are out of order. On my Macbook Pro (10.5.8) all shows are listed from first to last, from top to bottom. On the iMac (10.6.4) they are listed last to first, top to bottom.
    4. Some TV shows that are clearly in iTunes (purchased from iTunes) do not appear in Front Row at all.
    5. The unwatched content blue dot remains even after watching something all the way through to the end. After watching them in Front Row, iTunes does not show them as watched either, but instead has the half blue dot, as if they were unfinished.
    6. iTunes is also badly affected: I now have a large number of TV shows in the Movies section, and attempts to reorganize them in the folders on the external where they are store fails. It's a complete mess, and it seems like its deliberate that we cannot reorganize it ourselves.
    So what used to be a very lovely program has become a horribly messy, PC like, application. Which made the whole point of setting up a special computer just for media a total waste of time and money with Snow Leopard installed.
    If a fix is not forthcoming, I'm probably going to uninstall Snow Leopard, and reinstall Leopard. Everything worked fine there for me.

  • Gremlins in Vsn 1.6.1 under Snow Leopard.

    Have any other users notices graphics gremlins under OS X 10.6.2?
    As the play-bar progresses there are noticeable errors along the display of the time-line itself, like small "holes" in the graphics display?
    Operation seems fine. This issue did not seem apparent under OS X 10.5.8
    Also, as Logic Studio (9) now offers the Apogee UV Dithering algorithm, will we see that in Waveburner too?
    Many thanx.
    P.S. Logic Rocks under Snow Leopard - 64bit operation.

    Hi.
    make this.
    1. Go to the Apple> System Preferences...
    2.  Open the "Print & Fax" preference panel.
    3. Select the Printing tab, to get to the printers list.
    4.  Select the printer "Adobe PDF 9.0".
    5. Click the options and supplies button.
    6. Choose the Drive.
    Now I have reinstalled Leopard. but first like a Drive I have listed only a "Generic Printer".
    I tried to reassign it ADPDF9.PPD but is not recognized and automatically resets to a generic printer.
    So after some  tests that I have found here
    http://kb2.adobe.com/cps/509/cpsid_50981.html
    I have reinstall leopard
    This has been my problem.
    mario

  • No 802.11n on early Intel iMac under Snow Leopard

    Hello,
    After installing Snow Leopard on my white Intel iMac (first Intel iMac model) I have lost 802.11n functionality. I had to patch the iMac under Leopard with the AirPort Extreme 802.11n Enabler to get 802.11n working (http://store.apple.com/uk/product/D4141ZM/A). Snow Leopard appears to of changed the Airport Extreme settings, and under system profiler it just shows: ‘Supported PHY Modes as 802.11 a/b/g’
    I can no longer use the 802.11n enabler under Snow Leopard as it comes up with an error message "You cannot install AirPort Extreme 802.11n Enabler on this volume. This volume does not meet the requirements for this update." - this is due to an Airport Extreme 2007-002 upgrade being required (http://support.apple.com/downloads/AirPortExtreme_Update_2007002), which also won't install under Snow Leopard.
    Help! Is this a known issue and will Apple be releasing a Snow Leopard compatible 802.11n enabler? OR, is there a work around/fix under Snow Leopard.
    Essentially, accessing my home server for work is a nightmare as 802.11g is just not fast enough for the media files I work with.
    All help would be greatly appreciated.
    Regards,
    Graham Johnson.
    Message was edited by: orch5

    I am a bit confused as to which iMac you are trying to use with 802.11n.
    You say that you have the first white iMac that was Intel. But the first three white Intel iMacs do not have 802.11n capabilities; neither the Early '06 Core Duo, the Mid '06 Core Duo, nor the Late '06 Core 2 Duo CD have AirPort Extreme cards capable of 802.11n. But you profile is showing a 2.16 GHz iMac C2D which is Late '06 and does have the AirPort Extreme card with 802.11n capabilities.
    Is that the Mac that now appears to have lost this capability?
    What does Apple say? Did you buy Apple Care? Is it still in its last weeks of warranty?
    Dah•veed

  • Backing up an encrypted drive with Time Machine under Snow Leopard

    In a nutshell, my question is “Can I back up an encrypted drive using Time Machine under Snow Leopard, and if so, how do I access its data from a previous day?”
    I have a 1Tb USB drive connected to my MacBook, which runs Snow Leopard. The drive is formatted as Mac OS Extended (Journaled). This drive is included in the drives that Time Machine backs up. I used Disk Utility to create an encrypted drive on the USB drive (998Gb), also formatted as Mac OS Extended (Journaled). The encrypted drive is not on TimeMachine’s list of excluded files/drives.
    When I go into Time Machine, I can see the USB drive and the encrypted drive in the side bar. I can access the files on the encrypted drive as long as I’m looking at how it stands now. But if I move backward in time, the encrypted drive is grayed out and inaccessible.  If I click on the USB drive, I get a window that tells me it is 75.9Gb in size, and nothing else is available to me.
    When I open the back-up drive in Finder and navigate to Backups.backupdb > macbook name > some date and time, I see my MacBook’s hard drive and the USB drive. The encrypted drive is not shown. When I click on the USB drive, I see an entry for drivename.sparsebundle. When I click on that I’m prompted for the password for the encrypted drive. When I enter it, I get a warning telling me that the disk image could not be opened and that the encrypted drive has no mountable file systems.
    Is my encrypted drive really be backed-up and if so, how do I access the backed-up data? 

    Having received a bunch of views but no replies over the last 5 days, I decided to venture into my local Apple store and ask this same question. The response I got from the geniuses was that you can't get a reliable back-up of an encrypted drive using Time Machine under Snow Leopard. So, my only alternative is to copy the encrypted drive's contents elsewhere, unencrypt the drive, and then copy the contents back. This is what I expected, but not what I wanted to hear.

  • My app will no longer run under Snow Leopard, runs fine under Lion.

    My app will no longer run under Snow Leopard, even though it was originally written for Snow Leopard.  It runs fine on my Dev machine under Lion. But when I test it on my Snow Leopard Mac Mini the app starts but the window does not appear. Going to file, new window does nothing. My depolyment target is set to 10.6. Is there something I did to make my app lose Snow Leopard compatiblty?

    Does your application use features only available in Lion?  Are you getting any console logs?

  • I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

    After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this? 

    If you have this product,
    http://www.symantec.com/business/support/index?page=content&id=TECH165159
    you have to go back to Snow Leopard.
    To re-install SL, back up your home directory, format and re-install.

  • PhotoShop Elements 6 for Mac under Snow Leopard?

    Hi. Apple's new operating system for Mac, Snow Leopard is being released tomorrow.
    According to the Snow Leopard wiki, Photoshop Elements 6 does not work under Snow Leopard:
    http://snowleopard.wikidot.com/
    I contacted Adobe to ask if they had any plans to update Photoshop Elements 6 to work with Snow Leopard.  The response I got from their support was that Adobe Photoshop Elements was programmed before Snow Leopard and so they weren't responsible if it didn't work.
    I am pissed because of course Photoshop Elements was programmed before Snow Leopard.  EVERY software program was. Most of my software (and I have a lot of apps) are being updated for Snow Leopard by their developers.
    I'm writing this post just to make sure that Photoshop Elements doesn't work under Snow Leopard. It's possible whoever posted that Photoshop Elements didn't work under Snow Leopard could have been having an isolated problem.
    So, if anyone tries Photoshop Elements with Snow Leopard, please post here whether or not it works.
    Thanks a lot.
    Mirskyman

    No, there are no significant known conflicts with Snow Leopard, so that's not your problem. Have you deleted prefs since the upgrade? Was this an upgrade in place rather than an erase install? If so, go to your username>library>preferences and delete:
    com.adobe.Photoshop.Elements.plist
    Adobe Photoshop Elements 6 Paths Folder
    Adobe Photoshop Elements 6 Settings Folder
    Opera preferences
    repair permissions and see if it's any better. Do you have any third party content installed in PSE? There may well be conflicts with that, if so.

  • Canon iP6700D Tray Choices Disappear Under Snow Leopard

    I have a Canon iP6700D. In 10.5 and earlier, one could select between the automatic sheet feeder and the cassette through selections under "Quality and Media". Those options seem to have disappeared under 10.6.1 using the September 11th Canon printer driver. Nosing about in Google, others seem to have the same problem with this and other printers under Snow Leopard. I've tried uninstalling the printer and re-installing but it hasn't helped.
    Settings made under 10.5 and saved still appear in Snow Leopard, and are still able to access the cassette and the sheet feeder, but I can't find a place to CHANGE that for saved or for new settings.
    Can anyone tell me where to find this setting, or where I might find a patch that will fix the problem?

    The v10.26 driver for the iP6700D still has the Paper Source menu under Q&M on 10.6. I can only think that something is conflicting with your installation of the driver. I would trash the contents of the BJPrinter folder, located in HD > Library > Printers > Canon. Then install the v10.26 driver again and see if the menus are present.
    There were two versions of printer drivers available for 10.5, v5.8.3 and v10.xx. If you had the version 5 installed and had presets based on this driver, then they will not work correctly with the v10 driver on 10.6. You should Delete these presets and create new ones once you get the Q&M menu appearing on your install.
    Final note. You should be posting this question on the Snow Leopard forum. This forum is for Leopard printing and scanning issues.
    Pahu

  • TS2510 problem with soundtrack pro v2.0.2 under snow leopard

    Hi, I've just upgraded my mac book to snow leopard and now when I try to record something with soundtrack pro v2.0.2 through the line input jack, the internal microphone is still switched on and none of the preferences allow me to switch to the input jack,ks
    Does anyone know whether STP v2.0.2 will run ok under snow leopard? If I need to upgrade the drivers, does anyone know where I can find these and how to instal them.
    Many thanks.

    There are no "drivers".
    Use Audio MIDI Setup to set your audio input.
    Good luck.
    x

  • HP AIO: Scan to Computer STILL missing under Snow Leopard?

    Has anyone gotten any info on the status of the "Scan to Computer" and "Copy to Computer" (for reading memory card) under Snow Leopard? Being able to scan and copy files from my AIO directly to my Mac under Leopard was freaking awesome. Now I have to acquire images from the Mac (which works) and there is no way to automagically copy over files from the card reader at all.
    It's a real bummer to have to use a Windows machine to do these things... Especially since it was working fine in Leopard and we've been waiting months with no work and the only HP person appears to no longer be able to post here.

    Uh-huh. I beg to differ and think it is an Apple issue and an Image Capture issue in particular.
    I have a nice new Epson SX610FW that is absolutely stunning in Windows Vista.
    It also has Epson Scan application that does scan but Image Capture sticks and will not talk to the scanner.
    Plus on Windows I can fax from the 'pooter using Epson Fax, in OS 10.5 or 10.6 no fax option is available.
    I am of the opinion that print, scan and fax is broke in OS 10.6
    So, in my case on a wi-fi capable all-in-one:
    Windows Vista Home Premium
    Scan
    Print
    Fax
    On the device
    Copy
    Fax
    send scan to a declared network computer (I have not tried this too thoroughly but it looks broke on OS X)
    In OS 10.5
    Scan
    Print
    no Fax
    or 10.6
    Scan with Epson Scan but not with Image Capture or Preview (Preview fires up Image Capture with no option to use Epson Scan instead)
    Print
    no Fax
    Why won't OS X do Fax easily from an all-in-one - a relatively new all-in-one at that?
    Interim conclusion
    Image Capture is broked in OS 10.6
    Fax is strange in OS X

Maybe you are looking for