Automator not starting

I am having an issue with Automator in 10.5. It refuses to start at all. Begins the process, the beach ball spins and then it is gone and generates a "Send error report to Apple" message.
Any one else? Any solutions?
Thanks

I see it says 2.1 on your tagline - mine is 2.2 for Lion:
Looks like your Lion upgrade hasn't worked?
Regards,
Colin R.

Similar Messages

Campaign automation will not start

Hi
i'm having a problem here. I've created a campaign types and its elements and then i clicked on F5 to start the campaign automation flow. I dragged and dropped all the elements into the screen and defined all the necessary rulesv(channel, segments, etc). after that, i clicked on Save, then "Released" the campaign.
I then get a prompt if i want to start the campaign, but when i click on that, i get an error msg on the top of the screen saying that "Campaign has not started" with the following details "crm_mktca_execution009"
Can someone tell me what is wrong and what i can do to "fix" the problem.

HI Gregor,
I also getting the same error saying that Campaign has not started " message CRM_MKTCA_EXECUTION009".
I have taken a simple scenario. I have created only one Campaign No Campaign elements.
I also transferred the Target group to the channel before I started Campaign Automation.
Please suggest me how to go about it.
Thanks in advance.
Regards,
-Rahul.

Campaign Automation is next step is not starting

Hello Guru's,
Greetings.
I have created a campaign automation workflow like this..
1) Created a Campaign 1 - Campaign start
2) Created a campaign 2 as element - Assigned a communication method as e-mail with Survey link (Suevey is created under marketing) - Assigned a work flow send target group to channel - Have used the CRM_MKTCA_SURVEY_MKT_PBO and CRM_MKTCA_SURVEY_MKT_PAI in the survey to create the lead
3) Created a campaign decision - If "Would you like to receive the application with options as Yes"
4) Created a campaign 3 with empty target group and assigned a work flow "Add BP to Target Group" - Selected an option of Start for every respondant
5) Created a Campaign 4 by using the traget group created in step 4
6) I have activated all workflows
7) made the workflows as general
Released the campaign 1
Saved
Started the campaign
Campaign execution started and sends the mail to target group. I have responded for the survey, I can see the results on survey suite, also the Lead created.
Problem is .....
The decision is not triggering even if I select yes for step 3 (Condition is met), not starting the next step.
I am missing some thing here, can you please guide.
Thank you very much.

Sloved my self by assigning the CAMPAIGN_AUTOMATION_LEAD Action profile to the Lead transaction in SPRO. This Action Profile will have MKTCA_PROC_INB method, which will trigger the next steps or followup actions.
Thanks to all

Service Hub Transport not started

Hi all
I have single virtual machine with Win2008EEx64 with role Domain Controller i try install Exchange 2010 with roles Mailbox,CAS and HUB When i install HUB role occur error. Service HUB Transport not start :(
Here link with error http://img7.imageshack.us/img7/1245/errorhub.jpg I can Uploading full logs install Exchange 2010. Perhaps do you have
concurrent errors ?
Small fragment log :(
"[04/18/2009 12:43:51.0403] [1] Processing component 'Bridgehead Service Configuration' (Starting Hub Transport services).
[04/18/2009 12:43:51.0403] [1] Executing 'if ($RoleStartTransportService) { start-SetupService -ServiceName MSExchangeTransport }', handleError = False
[04/18/2009 12:43:51.0403] [2] Launching sub-task '$error.Clear(); if ($RoleStartTransportService) { start-SetupService -ServiceName MSExchangeTransport }'.
[04/18/2009 12:43:51.0403] [2] Runspace context: Executing user: Exchange2010.local/Users/Administrator, Executing user organization: , Current organization: .
[04/18/2009 12:43:51.0403] [2] Beginning processing.
[04/18/2009 12:43:51.0403] [2] Current ScopeSet is: {Domain Read Scope: {, }, Domain Write Scope(s): {, }, Configuration Scope: {, }, Server Configuration Scope(s): , Exclusive Scope: {, }}
[04/18/2009 12:43:51.0403] [2] Resolved current organization: .
[04/18/2009 12:43:53.0840] [2] The maximum wait for the operation is set to '00:15:00'.
[04/18/2009 12:43:53.0840] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='0'- Current checkpoint='0'.
[04/18/2009 12:43:53.0840] [2] Previous service status query time is '4/18/2009 4:43:53 PM'.
[04/18/2009 12:43:53.0840] [2] Current service status query time is '4/18/2009 4:43:53 PM'.
[04/18/2009 12:43:53.0840] [2] Will wait '2000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:43:55.0934] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '2000' milliseconds.
[04/18/2009 12:43:55.0934] [2] The remaining time for service status change is '00:14:58'.
[04/18/2009 12:43:55.0934] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[04/18/2009 12:43:55.0934] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:45:26.0012] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:45:26.0012] [2] The remaining time for service status change is '00:13:28'.
[04/18/2009 12:45:26.0012] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:45:26.0012] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:45:26.0012] [2] Current service status query time is '4/18/2009 4:45:26 PM'.
[04/18/2009 12:45:26.0012] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:46:56.0043] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:46:56.0043] [2] The remaining time for service status change is '00:11:58'.
[04/18/2009 12:46:56.0043] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:46:56.0043] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:46:56.0043] [2] Current service status query time is '4/18/2009 4:46:56 PM'.
[04/18/2009 12:46:56.0043] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:48:26.0293] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:48:26.0293] [2] The remaining time for service status change is '00:10:28'.
[04/18/2009 12:48:26.0293] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:48:26.0293] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:48:26.0293] [2] Current service status query time is '4/18/2009 4:48:26 PM'.
[04/18/2009 12:48:26.0293] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:49:56.0465] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:49:56.0465] [2] The remaining time for service status change is '00:08:58'.
[04/18/2009 12:49:56.0465] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:49:56.0465] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:49:56.0465] [2] Current service status query time is '4/18/2009 4:49:56 PM'.
[04/18/2009 12:49:56.0465] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:51:26.0481] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:51:26.0481] [2] The remaining time for service status change is '00:07:28'.
[04/18/2009 12:51:26.0481] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:51:26.0481] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:51:26.0481] [2] Current service status query time is '4/18/2009 4:51:26 PM'.
[04/18/2009 12:51:26.0481] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:52:56.0496] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:52:56.0496] [2] The remaining time for service status change is '00:05:58'.
[04/18/2009 12:52:56.0496] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:52:56.0496] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:52:56.0496] [2] Current service status query time is '4/18/2009 4:52:56 PM'.
[04/18/2009 12:52:56.0496] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:54:26.0668] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:54:26.0668] [2] The remaining time for service status change is '00:04:28'.
[04/18/2009 12:54:26.0668] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:54:26.0668] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:54:26.0668] [2] Current service status query time is '4/18/2009 4:54:26 PM'.
[04/18/2009 12:54:26.0668] [2] Will wait '90000' milliseconds for the service 'MSExchangeTransport' to reach status 'Running'.
[04/18/2009 12:55:56.0700] [2] Service 'MSExchangeTransport' failed to reach status 'Running' on this server after waiting for '90000' milliseconds.
[04/18/2009 12:55:56.0700] [2] The remaining time for service status change is '00:02:58'.
[04/18/2009 12:55:56.0700] [2] [WARNING] Service checkpoint has not progressed. Previous checkpoint='1'- Current checkpoint='1'.
[04/18/2009 12:55:56.0700] [2] Previous service status query time is '4/18/2009 4:43:55 PM'.
[04/18/2009 12:55:56.0700] [2] Current service status query time is '4/18/2009 4:55:56 PM'.
[04/18/2009 12:56:10.0246] [2] Generated Watson report with dump for the service MSExchangeTransport
[04/18/2009 12:56:10.0246] [2] [ERROR] Unexpected Error
[04/18/2009 12:56:10.0246] [2] [ERROR] Service 'MSExchangeTransport' failed to reach status 'Running' on this server.
[04/18/2009 12:56:10.0262] [2] Ending processing.
[04/18/2009 12:56:10.0262] [1] The following 1 error(s) occurred during task execution:
[04/18/2009 12:56:10.0262] [1] 0. ErrorRecord: Service 'MSExchangeTransport' failed to reach status 'Running' on this server.
[04/18/2009 12:56:10.0262] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceDidNotReachStatusException: Service 'MSExchangeTransport' failed to reach status 'Running' on this server.
[04/18/2009 12:56:10.0278] [1] [ERROR] The execution of: "$error.Clear(); if ($RoleStartTransportService) { start-SetupService -ServiceName MSExchangeTransport }", generated the following error: "Service 'MSExchangeTransport' failed to reach status 'Running' on this server.".
[04/18/2009 12:56:10.0278] [1] [ERROR] Service 'MSExchangeTransport' failed to reach status 'Running' on this server.
[04/18/2009 12:56:10.0278] [1] [WARNING] <<< Setup failed to execute a task. Dumping all variables.... >>>
[04/18/2009 12:56:10.0278] [1] $ =
[04/18/2009 12:56:10.0278] [1] ? = True
[04/18/2009 12:56:10.0278] [1] ^ =
[04/18/2009 12:56:10.0278] [1] _ =
[04/18/2009 12:56:10.0278] [1] addressSpace = MOBILE:*
[04/18/2009 12:56:10.0278] [1] agent =
[04/18/2009 12:56:10.0278] [1] agentAssembly = C:\Program Files\Microsoft\Exchange Server\V14\bin\Microsoft.Exchange.MobileDriver.dll
[04/18/2009 12:56:10.0278] [1] agentFactory = Microsoft.Exchange.TextMessaging.MobileDriver.TextMessagingDeliveryAgentFactory
[04/18/2009 12:56:10.0278] [1] agentName = Text Messaging Delivery Agent
[04/18/2009 12:56:10.0278] [1] args =
[04/18/2009 12:56:10.0278] [1] assembly = Microsoft.Exchange.ProvisioningAgent.dll
[04/18/2009 12:56:10.0278] [1] classFactory = Microsoft.Exchange.ProvisioningAgent.AdminLogAgentClassFactory
[04/18/2009 12:56:10.0278] [1] comClassFile = C:\Program Files\Microsoft\Exchange Server\V14\bin\Monitoring\x86\DiagnosticCmdletController.dll
[04/18/2009 12:56:10.0278] [1] ConfirmPreference = None
[04/18/2009 12:56:10.0278] [1] connector = Text Messaging Delivery Agent Connector
[04/18/2009 12:56:10.0278] [1] connectorName = Text Messaging Delivery Agent Connector
[04/18/2009 12:56:10.0278] [1] ConsoleFileName =
[04/18/2009 12:56:10.0278] [1] DebugPreference = SilentlyContinue
[04/18/2009 12:56:10.0278] [1] deliveryProtocol = MOBILE
[04/18/2009 12:56:10.0278] [1] dllFile = C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSMIME.dll
[04/18/2009 12:56:10.0278] [1] Error = System.Collections.ArrayList
[04/18/2009 12:56:10.0278] [1] ErrorActionPreference = Continue
[04/18/2009 12:56:10.0278] [1] ErrorView = NormalView
[04/18/2009 12:56:10.0278] [1] ExchangePropertyContainer = Microsoft.Exchange.Configuration.Tasks.ExchangePropertyContainer
[04/18/2009 12:56:10.0278] [1] ExecutionContext = System.Management.Automation.EngineIntrinsics
[04/18/2009 12:56:10.0278] [1] exsSid = S-1-5-21-3189551677-1878205415-1818128433-1104
[04/18/2009 12:56:10.0278] [1] false = False
[04/18/2009 12:56:10.0278] [1] file = microsoft.exchange.protectedservicehost.exe.config
[04/18/2009 12:56:10.0278] [1] FormatEnumerationLimit = 4
[04/18/2009 12:56:10.0278] [1] fullPath = C:\Program Files\Microsoft\Exchange Server\V14\bin\microsoft.exchange.protectedservicehost.exe
[04/18/2009 12:56:10.0278] [1] HOME = C:\Users\Administrator
[04/18/2009 12:56:10.0278] [1] Host = System.Management.Automation.Internal.Host.InternalHost
[04/18/2009 12:56:10.0278] [1] input =
[04/18/2009 12:56:10.0278] [1] installedAgents =
[04/18/2009 12:56:10.0278] [1] InternalPowerShellUrl = https://WIN-EMFQIRKOWAL.Exchange2010.local/powershell
[04/18/2009 12:56:10.0278] [1] journalAgent =
[04/18/2009 12:56:10.0278] [1] localSite = Exchange2010.local/Configuration/Sites/Default-First-Site-Name
[04/18/2009 12:56:10.0278] [1] localSiteEdgeSyncConfig =
[04/18/2009 12:56:10.0278] [1] localSiteName = Default-First-Site-Name
[04/18/2009 12:56:10.0278] [1] MaximumAliasCount = 4096
[04/18/2009 12:56:10.0278] [1] MaximumDriveCount = 4096
[04/18/2009 12:56:10.0278] [1] MaximumErrorCount = 256
[04/18/2009 12:56:10.0278] [1] MaximumFunctionCount = 4096
[04/18/2009 12:56:10.0278] [1] MaximumHistoryCount = 64
[04/18/2009 12:56:10.0278] [1] MaximumVariableCount = 4096
[04/18/2009 12:56:10.0278] [1] mflFilePath = C:\Program Files\Microsoft\Exchange Server\V14\bin\en\Exchange.MFL
[04/18/2009 12:56:10.0278] [1] mofFilePath = C:\Program Files\Microsoft\Exchange Server\V14\bin\Exchange.MOF
[04/18/2009 12:56:10.0278] [1] MyInvocation =
[04/18/2009 12:56:10.0278] [1] NestedPromptLevel = 0
[04/18/2009 12:56:10.0278] [1] null =
[04/18/2009 12:56:10.0278] [1] organizationConfig = Exchange2007
[04/18/2009 12:56:10.0278] [1] OutputEncoding = System.Text.ASCIIEncoding
[04/18/2009 12:56:10.0278] [1] PID = 2380
[04/18/2009 12:56:10.0278] [1] ProgressPreference = Continue
[04/18/2009 12:56:10.0278] [1] PSBoundParameters = System.Collections.Generic.Dictionary`2[System.String,System.Object]
[04/18/2009 12:56:10.0278] [1] PSCmdlet =
[04/18/2009 12:56:10.0278] [1] PSCulture = en-US
[04/18/2009 12:56:10.0278] [1] PSEmailServer =
[04/18/2009 12:56:10.0278] [1] PSHOME = C:\Windows\system32\WindowsPowerShell\v1.0\
[04/18/2009 12:56:10.0278] [1] PSMaximumReceivedDataSizePerCommandMB = 2047
[04/18/2009 12:56:10.0278] [1] PSMaximumReceivedObjectSizeMB = 2047
[04/18/2009 12:56:10.0278] [1] PSSessionApplicationName = wsman
[04/18/2009 12:56:10.0278] [1] PSSessionConfigurationName = http://schemas.microsoft.com/powershell/Microsoft.PowerShell
[04/18/2009 12:56:10.0278] [1] PSTypePath =
[04/18/2009 12:56:10.0278] [1] PSUICulture = en-US
[04/18/2009 12:56:10.0278] [1] PSVersionTable = System.Collections.Hashtable
[04/18/2009 12:56:10.0278] [1] PWD = C:\Windows\Temp\ExchangeSetup
[04/18/2009 12:56:10.0278] [1] regsvr = C:\Windows\system32\regsvr32.exe
[04/18/2009 12:56:10.0278] [1] regSvr32WOW = C:\Windows\sysWOW64\regsvr32.exe
[04/18/2009 12:56:10.0278] [1] ReportErrorShowExceptionClass = 0
[04/18/2009 12:56:10.0278] [1] ReportErrorShowInnerException = 0
[04/18/2009 12:56:10.0278] [1] ReportErrorShowSource = 1
[04/18/2009 12:56:10.0278] [1] ReportErrorShowStackTrace = 0
[04/18/2009 12:56:10.0278] [1] RoleBinPath = C:\Program Files\Microsoft\Exchange Server\V14\Bin
[04/18/2009 12:56:10.0278] [1] RoleCustomerFeedbackEnabled = True
[04/18/2009 12:56:10.0278] [1] RoleDatacenterPath = C:\Program Files\Microsoft\Exchange Server\V14\Datacenter
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointABCHContactService = <ServiceEndpoint><Url>http://pvt-contacts.msn.com/abservice/abservice.asmx</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointDomainPartnerManageDelegation = <ServiceEndpoint><Url>https://domains.live.com/service/managedelegation.asmx</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveFederationDeprecatedMetadata = <ServiceEndpoint><Url>https://nexus.passport.com/FederationMetadata/2006-02/FederationMetadata.xml</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveGetUserRealm = <ServiceEndpoint><Url>https://login.live.com/GetUserRealm.srf</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveRmsCertificationService = <ServiceEndpoint><Url>https://licensing.drm.microsoft.com/licensing/licensing.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveRmsLicensingService = <ServiceEndpoint><Url>https://certification.drm.microsoft.com/certification/certification.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveRmsPublishingService = <ServiceEndpoint><Url>https://licensing.drm.microsoft.com/licensing/publish.asmx</Url><CertificateSubjectName>TO BE FILLED IN </CertificateSubjectName></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointLiveServiceLogin2 = <ServiceEndpoint><Url>https://login.live.com/RST2.srf</Url></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDatacenterServiceEndpointRmsPremiseAuthenticationCertificate = <ServiceEndpoint><CertificateSubjectName>CN=exchangelabs.live-int.com, OU=Exchange, O=Microsoft, L=Redmond, S=Washington, C=US</CertificateSubjectName></ServiceEndpoint>
[04/18/2009 12:56:10.0278] [1] RoleDomainController = WIN-EMFQIRKOWAL.Exchange2010.local
[04/18/2009 12:56:10.0278] [1] RoleFqdnOrName = WIN-EMFQIRKOWAL.Exchange2010.local
[04/18/2009 12:56:10.0278] [1] RoleInstallationMode = Install
[04/18/2009 12:56:10.0278] [1] RoleInstallPath = C:\Program Files\Microsoft\Exchange Server\V14\
[04/18/2009 12:56:10.0278] [1] RoleInvocationID = 20090418-1525100043514005697
[04/18/2009 12:56:10.0278] [1] RoleIsAdminToolsRoleInstalled = True
[04/18/2009 12:56:10.0278] [1] RoleIsDatacenter = False
[04/18/2009 12:56:10.0278] [1] RoleLanguagePacksPath = C:\1\
[04/18/2009 12:56:10.0278] [1] RoleLoggedOnUser = EXCHANGE2010\Administrator
[04/18/2009 12:56:10.0278] [1] RoleLoggingPath = C:\Program Files\Microsoft\Exchange Server\V14\Logging
[04/18/2009 12:56:10.0278] [1] RoleNetBIOSName = WIN-EMFQIRKOWAL
[04/18/2009 12:56:10.0278] [1] RolePreviousVersion =
[04/18/2009 12:56:10.0278] [1] RoleProductPlatform = amd64
[04/18/2009 12:56:10.0278] [1] RoleRoleName = BridgeheadRole
[04/18/2009 12:56:10.0278] [1] RoleRoles = AdminToolsRole
[04/18/2009 12:56:10.0278] [1] RoleSetupLoggingPath = C:\ExchangeSetupLogs
[04/18/2009 12:56:10.0278] [1] RoleStartTransportService = True
[04/18/2009 12:56:10.0278] [1] RoleTargetVersion = 14.00.0482.020
[04/18/2009 12:56:10.0278] [1] RoleUpdatesDir = C:\1\Updates
[04/18/2009 12:56:10.0278] [1] server = WIN-EMFQIRKOWAL
[04/18/2009 12:56:10.0278] [1] ShellId = Microsoft.PowerShell
[04/18/2009 12:56:10.0278] [1] StackTrace =
[04/18/2009 12:56:10.0278] [1] this =
[04/18/2009 12:56:10.0278] [1] true = True
[04/18/2009 12:56:10.0278] [1] user = Exchange2010.local/Users/Administrator
[04/18/2009 12:56:10.0278] [1] vdirName = PowerShell
[04/18/2009 12:56:10.0278] [1] VerbosePreference = SilentlyContinue
[04/18/2009 12:56:10.0278] [1] w3svc = System.ServiceProcess.ServiceController
[04/18/2009 12:56:10.0278] [1] WarningPreference = Continue
[04/18/2009 12:56:10.0278] [1] wasRunning = True
[04/18/2009 12:56:10.0278] [1] WhatIfPreference = False
[04/18/2009 12:56:10.0278] [1] WSManMaxRedirectionCount = 5
[04/18/2009 12:56:10.0278] [1] [WARNING] <<< Variable dumping complete. >>
[04/18/2009 12:56:10.0309] [1] Setup is halting task execution because of one or more errors in a critical task.
[04/18/2009 12:56:10.0309] [1] Finished executing component tasks.
[04/18/2009 12:56:10.0371] [1] Ending processing.
[04/18/2009 13:07:51.0090] [0] [WARNING] Setup has made changes to operating system settings that require a reboot to take effect. Please reboot this server prior to placing it into production.
[04/18/2009 13:07:51.0153] [0] End of Setup
[04/18/2009 13:07:51.0153] [0] **********************************************

Hi
I tested your problem in test lab and when desable ip v6 on network connection Transport service will take long time to start.
Try again after enable ipv6.
BTW-Also i was found good article for similar case with your case 
http://www.exchangeinbox.com/article.aspx?i=111
RegardsChinthaka
-If you think my thread is helpful for you, Please vote.

Photoshop CS4 will not Start

Hi, i'm usually quite responsible when it comes to making sure my system can coap with what i am asking of it, but i've ran into a problem that my computer just can't seem to get around, and means that photoshop cs4 will not start up.
I've been making .PAT files from a few pattern sourcebooks i've recently brought. The first two went fine, but a japanese sourcebook contained 250 reasonably hi-res pattern images which i put through an automated action which set them all as patterns for me for the Pattern Overlay option in beldning options. When i did this i noticed my computer started to slow down near the end of the process, so i saved out the .PAT file from them, and quit photoshop to free up over 2.10GB worth of data. I have 4GB on a 32bit XP, but only 2 and a half-ish is seen by windows due to the hardware installed aswell. Of course i plan to chnage this to 64bit soon, but anyway, when photoshop now is told to start up, it reads everything normally, then gets to "Reading Preferences", and crashes with an error report, which watching my task manager, i belive to be linked to memory shortage from having to load the patterns up.
I reset my preferences to see if it would set them all back to default and not read the added pattern files, but that made no difference. Any ideas?
Thanks in advance!!

I'd look into doing a couple of tests:
1.) Move those PAT files elsewhere
2.) Eliminate all programs and Processes, that are unnecessary. Task Manager>Processes will give you a list of all that load, and you can probably stop half of them with no ill effects. I'd use MSCONFIG, so you can go back and easily activate them later.
3.) Reboot and see what happens.
Note: John's suggestion on the Presets folder might address #1, but I'd also physically Move them. It sounds like you're running totally out of resources to run PS, so Textures, and such, might be an issue too.
A question: how are your Scratch Disks setup and please tell us about your I/O sub-system, i.e. the internal HDD's, their size, free space, speed, controller type and how these internal HDD's are allocated. Especially tell us if you have any physical HDD's partitioned.
Good luck,
Hunt

SQL Server not Starting Up - Could not open error log file system error = 5(Access is denied.)

Hi guys,
I am working on issue with SQL Server 2008 R2 .. we rebooted the server and after that all SQL services is not coming up. below is the error from eventlog...
SQL Server running under NetworkService account and has full control on this files..
from Config Manager ....
The request failed or the service did not respond in a timely fashion....
From Event log..
initerrlog: Could not open error log file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'. Operating system error = 5(Access is denied.).
Any idea or workaround..?
Thanks..
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

Finally I found solution and was able to bring back online the SQL Services...
I had a very similar issue with the following error (event log):
Description:
The SQL Server (MSSQLSERVER) service terminated with service-specific error 17058 (0x42A2).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17058
Date: 19/05/2012
Time: 10:20:14
User: N/A
Computer: NSQLXX
Description:
initerrlog: Could not open error log file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
Operating system error = 5(error not found).
In this case the ERRORLOG file had been marked as read only. This was following a scheduled automated boot. -This
was culprit
MSSQL wouldn't not start until this file had been changed.
http://www.experts-exchange.com/Database/MS-SQL-Server/Q_23951723.html
Thanks everyone for your kind replies and time...
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

Re-execution of campaign Automation Not working

Hello
We are using Campaign Automation Process to execute Multi Wave
Campaigns with Campaign Elements.When i use the "Start Process" button
in the Campaign Automation Graphical Modeler to execute the Campaign, it
works fine for the first time.However if i again re-execute the Campaign
Process using "Start Process" button in the Campaign Automation Applet
modeler,re-execution fails and it says that the "Execution of Campaign XXXXXXX has already
started" and "Campaign was not started".Please note that i have re-triggered the execution process only after the First execution has been successfully done.
Is it not possible to re-execute the Campaign once it has been already
executed using Campaign Automation Process?May be i have missed some customizing steps.
We are using SAP CRM 7.0.Any help will be appreciated.
Thanks,
Abhishek

Hi, Abhishek!
Have you found the solution how to restart/re-execute the campaign?
Appreciate any help with this subject!

Manually installed ziswin not starting

Hi all: Testing a new reimaging method in light of issues I
have with newer zfdagent. From what I have read ziswin can
be installed manually so that the full zfdagent is not
needed to restore image-safe data. However, my testing has
shown that ziswin will not kick off following a reboot like
it should (assuming the just imaged flag is set).
My manual install consisted of:
ziswinexe -> c:\windows\system32
ziswinr.dll -> c:\windows\system32\nls\english
Then run ziswin -install to set registry key. Supposedly
this should result in ziswin kicking off at every startup
and if the "just reimaged" flag is set restore the
image-safe data.
Can you help me out? Why will ziswin not start? Thanks,
Chris.

Chris,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.

please can somebody help, my imac will not start up, just chimes, apple sign then spinning cog. I have tried many key codes, no success, would really like to talk to someone.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing ' ' 1274181950 464843899 1233118628 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Error "can not start the configuration in parallel does not correct"

Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!

Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

Can not start data Collection service

I have installed Fabric Manager version 3.3.(4). In the Performance Web Client I can not start the service Data Collection is in starting forever.
I also could not stop it. I rebooted the server and the status for this service is in starting.
Thanks,

Please provide more details like: Server OS, Java version, and what type of database you are using for the FM Server. Have you considered using a newer version of FM Server?

I can not start secion in creative cloud from a macbook

I can not start secion in creative cloud from a macbook, always comes CERRO secion, and never I log in I can not start secion indesign folio builder fails me in muse could not enter if you remove it to install again, now I can not download, I tried / Library / Application Support / Adobe / OOBE rename the folder to OOBE_old setup Guide, and simply does not work, if we are paying the membership of adobe creative cloud, at least ask for is a solution, timely responses because we are losing time and therefore money, if they are solving a problem is better than what we say and if more users seek solutions and only wait.
En español.
No puedo iniciar secion en creative cloud desde una macbook, siempre sale CERRO SECION, y nunca me conecto, en indesign no puedo iniciar secion de folio builder me da error, en muse tampoco podia entrar a si que lo elimine para poder instalar nuevamente, ahora no puedo descargar, he intentado / Library / Application Support / Adobe / OOBE cambiar el nombre de la configuración rápida carpeta para OOBE_old, y simplemente no funciona, si nosotros estamos pagando la membresia de adobe creative cloud, lo menos que pedimos es una solucion, respuestas oportunas porque estamos perdiendo tiempo y consecuencia dinero, si estan resolviendo algun problema es mejor que lo digan y a si nosotros los usuarios no buscamos mas soluciones y solamente esperaremos.
we want a valid and positive response

Hello, could you please try the steps posted here: http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
Please let me know if you are successful or not.

Can not start Enterprise Manager web page

I can not start Enterprise Manager web page.
Here is my steps:
1. Start enterprise manager
emctl start
Waiting for EM to initialize ...Started
2. Check status:
emctl status
EMD is up and running : 200 OK
3. Start the web page
http://myhost:1810/
4. get following error
"There was no response. The server could be down or is not responding"
System info:
Database: 8.1.7.2
OAS: 9.2.0.2
JDK: 1.3.0_02
Server OS: SunOS 5.8
My question is where is the log file of enterprise manager and what the problem is.
Thanks in advance
Don

diego,
Thank you for your help. when I try your command I get following error:
emctl start iasconsole
Unknown command option
Usage::
emctl start|stop|status
emctl reload | upload
emctl set credentials [<Target_name>[:<Target_Type>]]
emctl gencertrequest
emctl installcert [-ca|-cert] <certificate base64 text file>
emctl set ssl test|on|off|password [<old password> <new password>]
emctl set password <new pwd>
emctl authenticate <pwd>
emctl switch home [-silent <new_home>]
emctl config <options>
emctl config options can be listed by typing "emctl config"

"can not start a job" issue in AWM

Hi ALL,
I am maintaining my cube from PLSQL with following options
1. buildtype = "BACKGROUND"
2. trackstatus = "true"
3. maxjobqueues = 3
i get following error when i see the "olapsys.xml_load_log" table
***Error Occured: Failed to Build(Refresh) DB_OWNER.MY_ANALYTICAL_WORKSPACE Analytic Workspace. Can not start a job.
Can anybody explain when and why this error occurs? I have wasted a lot of time searching for this issue, but have found no person facing such issue.
Hi Keith, it will be great if you can answer this one.
My database version is 10.2.0.4.0 and AWM version is also 10.2.0.3.0
Kind Regards,
QQ
Message was edited by:
dwh_10g

Applies to:
Oracle OLAP - Version: 10.1 to 11.1
This problem can occur on any platform.
Symptoms
- We have an AW maintenance / refresh script or procedure that contains BuildType="BACKGROUND", so that the AW maintenance task will be sent to the Oracle Job queue.
- When we execute the AW maintenance / refresh script or procedure, we do not get any errors in the foreground, the script/procedure has been executed successfully.
- However when we look into the build/refresh log (see <Note 351688.1> for details) we see that the maintenance/refresh task failed with:
13:29:39 Failed to Submit a Job to Build(Refresh) Analytic Workspace <schema>.<AW Name>.
13:29:39 ***Error Occured in BUILD_DRIVER
- In the generated SQL trace for the session of the user who launches the AW build/refresh script or procedure, we see that ORA-27486 insufficient privileges error occurred at creation of the job.
We see from the relevant bit of the SQL trace that err=27486 occured while executing the #20 statement which is 'begin DBMS_SCHEDULER.CREATE_JOB ...', and the statement is parsed and tried to be executed as user having uid=91:
PARSING IN CURSOR #20 len=118 dep=2 uid=91 oct=47 lid=91 tim=1176987702199571
hv=1976722458 ad='76dd8bcc'
begin
DBMS_SCHEDULER.CREATE_JOB(:1, 'plsql_block', :2, 0, null, null, null,
'DEFAULT_JOB_CLASS', true, true, :3); end;
END OF STMT
PARSE
#20:c=1000,e=1100,p=0,cr=0,cu=0,mis=1,r=0,dep=2,og=1,tim=1176987702199561
EXEC #20:c=65990,e=125465,p=10,cr=1090,cu=3,mis=1,r=0,dep=2,og=1,tim=
1176987702325167
ERROR #20:err=27486 tim=465202984
Cause
User who tries to create a job (executes DBMS_SCHEDULER.CREATE_JOB() procedure) does not have the sufficient privileges.
Solution
1. Identify the user under which the job is supposed to be created. This user is not necessarily the same as the user who launched AW build/refresh script or procedure. Get the corresponding username from one of the %_USERS views e.g. from ALL_USERS.
e.g.
SELECT user_id,username FROM all_users WHERE user_id=91;
2. Identify the system privileges currently assigned to the user by connecting as the user whom the privileges need to be determined, and execute:
SELECT * FROM SESSION_PRIVS ORDER BY PRIVILEGE;
3. Ensure that the CREATE JOB privilege is listed.
The CREATE JOB privilege can be granted in various ways to a user:
- via role OLAP_USER or via role OLAP_DBA (see view ROLE_SYS_PRIVS for what privs are assigned to a role):
GRANT OLAP_USER TO <username>;
- explicitly
GRANT CREATE JOB TO <username>;

Automator not starting

Similar Messages

Maybe you are looking for