Automator & podcast - but with a twist

So, here goes.
Every day, numerous small audio segments, from 5 seconds to 2 minutes long, get delivered to a particular gmail account as attachments, each a single attachment to an individual email. They are then routed to a mailbox on my mac.
I need an automator action - or several - to do the following every day:
a) download the audio attachments from that mail folder to a folder on my desktop or elsewhere;
b) format those into a daily podcast - but not one big single file, rather a podcast with "enclosures" (is that what you call it?) where each segment is a different track/chapter;
c) upload the podcast, appropriately formatted, to some filespace somewhere.
The podcast/feed on my Typepad site will, I assume, link to the newest file each day.
Is this the kind of thing that Automator can do? Do I need another piece of software in addition? If so, what? Should I attempt to do it myself, or hire someone?

Many thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Similar Messages

Photos missing from iPhoto/TM backup but with a twist.....

So, there is a challenging twist associated with this case of missing photos and I hope an expert can provide some advice. Note: This is not related to upgrading from iPhoto '09 to '11 thank goodness!
Here is the story in condensed form, with additional details below:
MBP stolen but backed up with TM
Used TM on the replacement MBP to browse backup of iPhoto backup of stolen MBP
Restored iPhoto library to new MBP
Open iPhoto on new MBP and browse library
Everything looks OK except *FIVE* Events which show in the Event viewer as blank grey squares. However, the Events have the correct titles and show the correct number of pictures in brackets in the title. In addition, using the trackpad to scroll over the Event there are no thumbnails visible. If I click on the Event all the photos are greyed out but they do have the correct titles and keywords below the grey boxes. If I click on an individual photo I get a black exclamation mark in a grey circle. Interestingly the LAST IMPORT folder in iPhoto DOES show the thumbnails for ALL the missing pictures, all arrange with the correct Event titles. Of course, clicking on any individual picture gives me the same exclamation mark detailed above.
After reading these support forums I have tried the following:
1) Viewed package contents ---> the blank Events DO NOT show up as folders in the Finder window
2) Used COMMAND & OPTION to launch iPhoto and checked the following boxes in the REBUILD DIALOG BOX: rebuild small thumbnails/rebuild all of the photos' thumbnails/recover orphaned photos/examine and repair permissions ---> Issue persists
3) Download iPhoto Manager and tried EXTRACTING all the photos from the library --> Photos from missing events still not showing up. Not really surprising given that the VIEW PKG. CONTENTS in #1 above didn't show them either.
4) Used iPhoto Manager to REBUILD LIBRARY --> still doesn't show them
5) Used TM to browse the backup directly --> missing photos have blank placeholders only.
It appears for what ever reason the photos have been deleted from the backup. I say "deleted", as opposed to "not backup up", because iPhoto has the remnants of the photos (i.e, Events, thumbnails, titles, keyword, etc.). Any suggestions on how to possibly recover these missing pictures. How about the thumbnail versions at least, even in their their low resolution form. Although, I admit I don't know how/where thumbnails are dealt with in iPhoto as they don't seem to show up in the Library package contents.
Additional info:
OSX 10.7.5, iPhoto '09 is version 8.1.2, and iPhoto library is 75GB, 139 Events, 28,000 pics
The day before the MBP was stolen I downloaded a number of photos and did some editing. That night plugged the MBP in and noticed that the Time Machine did a number of backups through the night, although the iPhoto library seems untouched but can't be sure. The following morning, the computer was used for a few hours and thus had plenty of time to complete any backups necessary.
The *FIVE* Events that are affected seem to be the most recent ones, worked on the night before the MBP was stolen.

I cannot say for certian but it is highly likley that YES, when the person finished editing they just closed the lid of the computer and didn't actually quit iPhoto. So would this explain why there are fragmenst of them in the backup (i.e. Events, keywords, thumbnails, etc.) but not the actual image files? Any way I can at least save the extremely low res thumbnail versions?
I'm also going to try Data Rescue on the camera memory card to try and recover them that way.
Thanks.

Same old Bondi blue FBT story, but with a twist?

Hi.
I've been all over the internet trying to understand the FBT workarounds for an old Rev A Imac and I apologize in advance if this is a redundant question.
I must admit I'm now a little confused. I think the problem with the computer is a bad FBT. When I press the power button, I get an amber light, chime, spin up and then a pop and it shuts down. When I connect an external apple monitor to it, it boots right up. Here's the kink-when I connect a PC VGA monitor through an adapter (I've tried two different adapters and three different monitors), the light stays amber and no chime. Finally, when I disconnect the external monitor and boot, with no monitor connected (just the adapter plugged into the back of the bondi) wait for the chime, and then connect the external monitor, all is well and it boots. I want to remove the motherboard and power supply from the case and just make a new case with an external monitor. Any suggestions on what this might be? Reset PRAM? Bad PRAM battery?No hope at all? The power button seems to remain amber the whole time. Should it turn green or some other color at some point?
PS-This was all done with the original OS 8.x software on the machine...
Thanks in advance!!
Biokemyst
Message was edited by: Biokemyst

These forums have many more readers than posters. Some readers would be ready, willing and able to answer your question, but they may not be native speakers of English. When you use acronyms, like FBT, but do not define them, readers may have trouble understanding.
When I connect an external apple monitor to it, it boots right up.
Then it is working fine. The iMac power supply uses the Flyback transformer to generate various Voltages used to power Digital Logic inside the iMac. If the Flyback Transformer were not working, you would not get to the software-generated chime that indicates booting is likely.
when I connect a VGA monitor through an adapter (I've tried two different adapters and three different monitors), the light stays amber and no chime.
Then your adapters are not the right ones for that Mac. It is very common for the wrong adapter to cause no green light and no picture.
The adapters do two jobs:
1) they shuffle the signals around to the right pins so that you can get a picture on the display.
2) they provide a code on pins 4, 7, and 10 that tells the Mac what display is attached, thus limiting the resolutions that the Mac will allow. On later Macs they can tell the Mac to look for Digital Data Channel information from the Display.
Do you get a good boot up and a picture on the internal display if you boot from a System CD appropriate for that Mac? This test bypasses your Hard Drive and all the software on it, effectively cutting the problem into Hardware vs. Software.
Message was edited by: Grant Bennet-Alder

Another 'can this wirelessly extend my network' question, but with a twist

Perhaps not a great twist, but I'm running a powerline network in my home, from an Apple Extreme-N Airport. Love the speed, but am wondering if I can simply plug an Airport Express on the far end of the house into the powerline system and use it to broadcast the signal where it's a bit weak.
Is this possible? It sure seems so. I much appreciate the help

Welcome to the discussion area, applenewbie80!
but am wondering if I can simply plug an Airport Express on the far end of the house into the powerline system and use it to broadcast the signal where it's a bit weak.
Yes, you can do this if you configure the AirPort Express as a "bridge" to create a wireless network using the same wireless network name, security and password as your AirPort Extreme network.
Then, computers will be able to "roam" from one area to another and stay on the same network. Or, you could assign a different name and log in for the AirPort Express wireless if you preferred.
Post back if you need more information.

Resubmit a podcast but with a different rss feed.

I am having to resubmit a podcast using a different rss feed. I have just recently changed on how I will be doing my podcast and of course the rss feed has changed. How do I go about fixing the older podcast with the new feed or do I have to do away with the old and start all over again with getting my podcast reinstated?
Thanks in advance
Kimmer Mussman

Interestingly, it appears you did manage to get your podcast accepted in the Store - if you did this with an .html feed I'm a bit surprised it worked. I wonder whether you started with an .xml URL and it got changed by accident?
If you did manage to get the Store to accept a feed with an .html extension then you will need to change its attention to the revised version of the feed. This will mean that you will have to leave the present feed where it is, upload a version with the correct extension (having checked it works) and then add the 'itunes:new-feed-url' tag to the incorrect feed as described in this page:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
Of course if you managed to change the extension by accident then changing it back should do the job.

Yet another imessage to one specific person thread - but with a twist.

Hi.
Monday this week I started experiencing difficulties sending imessages to one specific person from my phone. The messages would leave my phone but I get no indication of anything - no red error symbol, no "delievered", just silence. We are constantly sending each other messages and have been for quite some time - always using imessage. First off it looked like the messages was not being sent at all but I have discovered that they are delivered after 10-20 minutes.
What I have tried so far:
Can successfully send and recieve messages to and from others using imessage
Rebooted phone
Turned off imessages and reset network settings
Turned off imessages and facetime and removed email addresses
Used flight mode with only WIFI enabled and vice verca
Tried from a new iphone device set up as a new phone
What the other person has tried:
Can successfully send and recieve messages to and from others using imessage
Rebooted phone
Turned off imessages and reset network settings
Tried from a new iphone device set up as a new phone
I do not have the faintest idea as to what can be the problem now and would really appreciate some good pointers.
Regards
Thomas

Good idea. But wouldn't this have been covered by trying to message each other from a new phone - set up with no restore and hench being empty?
Thomas

Another "can't download support drivers" question (but with a twist)

From looking through the forum it seems that a lot of people are having difficulty downloading the drivers through the boot camp assistant, and the most common advice seems to be to use the drivers that come with the snow leopard 10.6 install disc.
That's all good and well, except I have just bought a brand new iMac and it had Mountain Lion on it already. It did not come with any software installation disc.
So my question is: how do I get the windows support software onto my machine if I can't download it through the boot camp assistant?
Should I have received a system software CD with my computer?
Many thanks in advance.

Well I got everything up and running today, not a bother.
It actually only took about an hour, if that, to download the drivers. Possibly because I downloaded them early this morning (which would be the middle of the night over in the US and so probably a lot less people trying to download it from the apple servers).
For a while only the keyboard was working but for some reason the wireless mouse wasn't, but I just ran the driver installer again and it seemed to resolve itself.
So thanks for all the help guys, much appreciated.

Ipod not being recognised, but with a twist

Hi,
My ipod nano 5th Gen is not being recognised on my computer. It is now being recognised by the computer itself sometimes, but not itunes. However, when I plug my ipod into my partners laptop, its fine. More to the point, when they plug their's into my laptop, it recognises them. To me, this suggests that both my laptop and my ipod, individually at least, are working.
I have been through the ipod support page, and gone through all the steps, and to no avail.
Final details. I'm Windows 8, and my itunes is totally up to date. I have re-installed iTunes, and have reset my ipod to factory settings on another computer. It still doesn't work, please help if you know anything about this!!
Cheers,
Ralf

I have the same issues. itunes 5.0.1.4 doesn't recognize my mini. ipod updater doesn't recognize my mini either. i have uninstalled itunes 5 and reinstalled 4.9, but it didn't work still. something in itunes 5 changed something in my system that reinstalling 4.9 doesn't fix it. updater just shows that i have no ipod connected. if i try to get updater to check for my ipod during the updater installatin, it just sits there and says "waiting for ipod". it's not my usb port because i can read and write to my ipod. i did the entire list of chores that apple suggests on the site including disabling all other functions and services, reinstalling the com port, uninstalling everything, reinstalling everything, getting windows install clean up, e v e r y t h i n g! nothing worked.
I then installed itunes 4.9 and updater 1.4 in my other laptop. i was able to update to firmware 1.4 using that computer. when i put the ipod into that computer w/ itunes 4.9, everything works fine. of course, it asks me if i want to link that laptop w/ my ipod. i said no, because i want to use my original laptop w/ the ipod.
anybody have a solution for this? it's like we all have the same symptoms and going to the same doctor and we end up having to diagnose ourselves. this is extremely annyoying and inefficient.

Same problem printing pdf but with a twist

I am having the same problem as others have described in not being able to print certain pdf documents. I have tried all of the suggest "fixes" including uninstalling and reinstalling Acrobat XI Pro. (I am on a Windows 7 Professional system). The twist is that if I open the pdf on my Ipad I can print it from there - just not on my windows based PC. Now what?????

Hi Paul,
Please refer to this KB doc. Troubleshoot PDF printing | Acrobat, Reader and follow the steps in order to resolve the issue.
Let me know if the issue persist.
Regards,
Aadesh

Same problem with 10.4.9 but with a twist

So I am having the same problem many others are having after installing the new update. There is just the grey scren with the apple logo and a spinning progress wheel. I have tried to start up from the installer disk to reinstall, However, I am told that I don't have enough free space. So how am I supposed to free up any space when I can't get to anything!!
mac mini Mac OS X (10.4.5)

Unless you have a bootable backup/clone on another disk and can boot into it, you'll have to boot with the install disk, enter your language, and, when the menu bar pops up, select Utilities->Terminal and use it to delete stuff. If you're not familiar with the command line interface, you have a daunting task. Alternatively, if you have another computer, you could mount the mini into target disk mode (see http://docs.info.apple.com/article.html?artnum=58583 for details), and use the host computer to delete stuff from the mini.

Missing .MSI but with a twist

Hi There I have searched the forum for the specific answer to this message I keep getting when I try to either download and install OR remove with CCleaner.
The feature you are trying to use is on a network resource that is unavailable. I am not on a network with this computer. I have this also with IObit program when I try to uninstall it. It is still showing up on the list of programs to uninstall. I am using Microsoft Windows Vista SP 2. Also for some reason my DVD player is not showing up in the device manager and somewhere along the line I read that iTunes/QuickTime are most likely the "culprits".
Any help is appreciated, Thanks KSB

Many thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

HT1689 I subscribe to my video podcasts but some of them either has a small red E next to them and won't download new content or some just doesn't download new content. I have been watching the Rachael Maddow video podcast for at least a month with no pro

I subscribe to my video podcasts but some of them either has a small red E next to them and won't download new content or some just doesn't download new content. I have been watching the Rachael Maddow video podcast for at least a month with no problems. Now suddenly it won't download the last nights show. I have read and followed all troubleshoot and cannot find a solution. I have unsubscribed and re-subscribed to no avail. Can someone help me with this problem?

keian27 wrote:
And now that my contract has expired, I have some options. Last weekend, I called Verizon again threatening to leave. The representative offered the same $75 rebate that was offered to me 6 months earlier. I even offered up one of my device upgrades in place of a network extender, but that deal was knocked down. And so now I’m left with the option to make a public spectacle out of this scenario and hope Verizon takes notice. Failing that, I’ll be forced to leave Verizon behind.
I don't understand. If having service in your home IS important to you and you already know Verizon's policy, why have you not instead started to search for carriers which cover your home? It seems a pretty easy decision to me, at least.

My mid-2010 27" iMac running Mavericks is fine in safe mode, but with normal boot up the screen goes haywire with some animation emanating from the apple menu area at top left of screen.

From what I'm reading in these forums, this is likely an issue due to some 3rd party software / kernal conflict. I am going to run a diagnostic and perhaps someone here can help me evaluate the results and determine what software must be removed.
It's hard to describe what I'm seeing on screen. I've never seen anything like it. I get a number of lines that begin at the top left of my screen, about at the apple icon, and they spread out in a triangular pattern from left to right, top to bottom across my screen, while the entire screen flickers uncontrollably. I realize that iMacs from this era have screen issues, but since I can boot fine in safe mode, this can't be a hardware issue.
Any assistance is greatly appreciated!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri|sshd?_c)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf,ssh{,d}_c*} {,/usr/local}/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I attempted to download a podcast but it was corrupt and only a fraction downloaded. It won't download and I can't delete. How do I get it off my itouch?

I attempted to download a podcast but it was corrupt. Only a fraction downloaded and I can't download nor delete. Any ideas as to how to delete?

If a Podcast has only partially downloaded, then you need to delete that partial download before iTunes will "allow you" to begin a fresh download of that same file.
Have a look in your iTunes Media folder for the Download folder. On my Windows 7 for instance, it's Music/iTunes/iTunes Music/Downloads. In that folder, there should be a sub-folder with the name of that podcast which has the partial download in it. Delete the named podcast folder, but not the Download folder.
You should then be able to start a fresh download (if you still want it!).

I am trying to download a podcast, but it tells me "to download ....you need to have ITunes", I already have ITunes 10 installed, I am using Windows 7, 64 bit

I am trying to download a podcast, but it tells me "to download...you need to have ITunes", I already have ITunes 10 installed

Hi kikor99!
Here is an article that will help you troubleshoot this issue with your ability to download this podcast:
iTunes Store: Can't download or play a podcast
http://support.apple.com/kb/ts2313
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Automator & podcast - but with a twist

Similar Messages

Maybe you are looking for