Automotically Hands free mode is switching ON & OFF while conversation

Hi,
I facing the problem with my 8520 model, the problem is that, The handsfree mode is automatically getting switched ON and OFF automatically. So I cannot hear the voice of the caller. It happens only after I used the Nokia's ear phone.After that I tried with Blackberry original ear phone, But till I am facing the problem. Kindly give me the solution.

Hi smaniramji and welcome to the BlackBerry Support Community Forums!
Are you using a wired hands free device or are you using a Bluetooth handsfree device? Have you tried rebooting your BlackBerry smartphone to see if the problem exists after that?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

HT204389 In hands free mode, why does Siri lock my phone after executing a command?

Anytime I'm using Siri in my car in hands free mode, she locks my phone immediately after executing my command. Then I can't access certain abilities without unlocking first - which obviously is missing the point of hands free mode.
Thank you!

May have found a solution for part of this. In the first senario when the two names are presented, repeat request with a verb and a noun. Say call John.
As for the 2nd senerio, I have not been able to find a solution.
Siri appears to be a toy and an advertizing campain talking voice but little else. Upsetting as it was one of the reasons for choosing this platform. It will get better but not soon enough.
For now considering turning it off and using regular voice control agumented by Plantronics Vocalast service. I can possibly go on business trips and use my phone hands free whith the state Siri is in right now.

I am having iphone 5. my phoen restarts automatically after i switch it off while not on charging. but when it is charging it works normally. battery also discharge in 1 hour.

i am having iphone 5. my phoen restarts automatically after i switch it off while not on charging. but when it is charging it works normally. battery also discharge in 1 hour.

basically i bought this phone from canada & using it in india. i tried to contact apple support in india, they told that the warranty is valid in the country where you purchsed this phone. very ammazing. Apple is a very big brand name & they are not serving their costumers in other country. any suggestions?

Hands Free Mode keeps turning itself on. How do I stop it?

I have repeatedly turned off hands on mode (Settings/Device), but it keeps turning itself back and the stupid voice wants me to say "Hi Galaxy" or asks if I'm having a nice day. It may have been a nice day, but not after hearing that voice. This seems to be associated with receiving a notification.
How do I turn off this feature such that it only comes on when I want it to?
John

I'm sorry to hear about this issue that's occuring with your phone jstevens8352. Have you tried adjusting the notifications on your device? I have listed them below:
• From the home screen, select Apps (located in the lower-right).
• From the Apps tab, select Settings.
• From the My device tab, select Sound. • Select Notifications. • Select a notification then select OK.
Do you have any apps that may be tied into this setting? If so, please temporarily remove. I would also recommend safe mode? Put the phone into safe mode and test the device, then disable the setting. Here is a link to the steps http://vz.to/1hCWfLm .
KinquanaH_VZW
Follow us on Twitter @vzwsupport

MBP simply switches itself off while on battery

Hope to get some idea of what's going... basically yesterday while I was using my MBP on battery alone, the computer simply switches itself off out of the blue. So I check the temperature and everything seems fine. I was using it with video card in the "better battery life" mode, so I didn't think it was overheating. So I switched it on again. After starting, after a few minutes it went off again. I gave up and didn't switch on again until connected to the mains, and it is on until now without any problems.
Has anyone experienced this before? Any ideas of what's going on?
Thanks

I have experienced this before. I hate to be the bearer of bad tidings, but this is a sign that the battery is dying. You may well find that the time before this happens reduces until eventually you will get a few minutes at best.
You do not say how old the MBP is or if this is the original battery. My old one (recently replaced) went through the first battery in just over a year; and then a year later the second went too. I changed how I used the third one. I had relied on mains power when I could before. With the last one I used battery whenever I could and charged when necessary.
Make sure the battery is calibrated but I am not sure that is going to help.

Volvo s80 2008 model works with iPhone 5 only on hands free mode. Should it not also play my music through Bluetooth connection. Even my 4 year old Tom Tom does that.

How do I get iPhone 5 to stream music by Bluetooth to my volvo s80. My built in volvo Bluetooth seems only to pair for calls and address book only but I can't get it to stream the music. Surly this should be possible my 4 year old Tom Tom even does that.

If bound to a Bluetooth device which support a2dp all audio Will play out of the Bluetooth device this have been the case with all iOS devices which support Bluetooth

Foreign Currency rounding off while conversion

Hi All,
I am experiencing a scenario while foreign currency conversion.
I have searched for a solultion but i am unlucky to find one regarding this problem.
The scenario:
Example:
Foreign Curr | Value | Rate | SAP converted Local Curr(Yen) | Act Con Value(Y)
Euro | 1210Eur| 127.99Y| 154868Y | 154867(-veRound Off)
Is there any setting where you can round off the converted amount to its negative whole amount?
I have searched all the setting in Foreign Currency transactions(OB52,OB59) but couldnt find.
Hope i can get a solution.
Regards
Andrew

Hi
Reason and Prerequisites
u2022Your tax country is Slovakia
u2022You billed an order with several items in foreign currency,
u2022where the exchange rate factor between foreign currency and local
u2022currency is very large or very small.
u2022The accounting document created during the billing has a tax line item that contains incorrect amounts in local currency
Solution
The solution is using the same solution as note 832477 and 32477 with the difference that the country is Slovakia. For other countries you should put the variable L_LAND1 to the string that represent the country.
Limitations:
The solution will NOT lead to a recalculation of taxes in local
currency. However, it will serve to minimise any rounding differences
which may arise from converting the individual tax lines which are
transferred from SD to FI. In most practical cases, this should fulfill
the legal requirements, even though rounding differences may occur for
individual documents in special cases.
Regards
uday

Washington State now requires hands-free use: we NEED help from Apple

While iPhone pairs seamlessly with bluetooth-capable automobiles, users will nonetheless struggle to comply with laws that mandate hands-free phone usage in our cars. Answering calls is easy, but in order to dial in hands-free mode we need either
1) Voice-dialing
-or-
2) Complete contact list transfer, enabling one-touch dialing features already built into our cars.
At this time iPhone offers neither, and since I have to look at the screen to dial a contact I'd be in violation of the law when relying on my iPhone in the car to make calls.

My car has voice operated dialling (Honda Civic).
I program my numbers in the car via voice and allocate then a voice command (like "Mother").
Then all I do is press the button on the steering wheel and say "Dial Mother' the car repeats back to me "Do you want to dial Mother?", I press the button again and say "Yes", the car says "Dialling".
It then connects to the phone dials the number and the audio in and out is sent via the car microphone and speakers. It even directs the sat nav commands to the opposite side speaker so that you hear two distinct voices.
Ian

TS3274 My Ipad display is stuck on portrait mode. I tried the toggle switch, turning off and restart and just now backed up into Itunes and restored and still is stuck on portrait mode and it won't flip to landscape mode. Is this a hardware problem?

My Ipad display is stuck on portrait mode. I tried the toggle switch, turning off and restart and just now backed up into Itunes and restored and still is stuck on portrait mode and it won't flip to landscape mode. Is this a hardware problem?

Has lock rotation been accidentally enabled within the control centre? If you swipe up the screen is there a circle with a lock symbol & if so is is greyed out or white - if white it is enabled.

Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anyth

Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything. I have taken my car to my local dealer but they say the Radiosat is working ok?

Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling

My Ipad got wet in the rain. Unfortunately it was in my bag it was in sleep mode. Now i am not able to switch it off and it automatically selects different pages and Icons.What should i do. Please help

My Ipad got wet in the rain. Unfortunately it was in my bag it was in sleep mode. Now i am not able to switch it off and it automatically selects different pages and Icons.What should i do. Please help

Solutions for wet iPad.
http://www.gazelle.com/how-to/ipad/ipad-recover-from-water-damage
http://www.knowyourmobile.com/appleiphone/ipad/ipaduserguides/701079/how_to_fix_ an_ipad_if_it_gets_wet.html
 Cheers, Tom

Switch on telephone ringing when hands-free connected

Is it possible to switch on the ringing of telephone even when hands-free is connected? I do not wear the hands-free all the time (it is on my table) and I cannot hear ringing in case of upcoming calls. On my old Nokia this was standard setting.
Thank you.

I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.

Nokia 7373 turning off hands free

does anyone know how to turn off hands free - cable is unplugged and when making a call the options list only has load speaker as an option

Turn the phone off and clean the bottom connecter with a little brush. then see if it makes a difference.
Nokia N95
V 20.0.015
0546553

Prevent Macbook/Cinema display sleep mode when switching from plugged-in/off

Hello, I've a macbook connected to a Cinema Display. On Energy Saver, all is set to never go to sleep. I'm trying to prevent my macbook going to sleep mode when I plugged off it. Do you have any solution for this?

KinoBillie wrote:
Hi tjk,
Yes I mean when I disconnect the power supply (that comes from the Cinema Display) the macbook pro goes into sleep mode until i press a button on the keyboard, then it returns into running mode (even if in energy saver all is set to never go to sleep).
I would like that, if there is a power cut in my house, the mbp does not go into sleep mode but continue to be in execution (by means of battery) avoiding sleep mode.
Thanks
Looks like someone already cut in to try answering, but I'll answer the question you asked me anyway. You can read Apple's directions http://support.apple.com/kb/HT3131 and see that unplugging is the cause. It's not really an issue, it's just the way it works.
Contrary to the statement "There's no way around it." you may want to look into UPS (uninterrupted power supply) if it's important enough to you. I have never used one so I am not familiar with them, but by their very nature/purpose, I would think they'd do what you need.

Having trouble using my 9720 connecting to car hands free kit

Hi, i am utterly frustrated with my company blackberry 9720 phone. The trouble i am having is with the car hands free kit, my skoda superb uses the bluetooth premium and cannot use the normal hands free setting like with my Iphone. The problem i am having is firstly connecting, i can only use the bluetooth premuim, which completly changes all the setting on the phone i.e turns the network off on the phone and then a screen pops up saying running SAP mode (must use an ittenna in car?), which in turn stops emails from coming in, i can stupidly write texts messages on my dash board and receive them and read them on my dash board while driving. So when i remove the keys from the ignition the phone does not put the phone back to its normal working settings, it keeps the network switched off i have to go to settings and turn the network on. Thirdly when i turn the car on the phone will not connect automatically it says cannot connect to mobile, but if i switch the phone off and on it automatically connects, but if by the grace of god it does connect an second time the phone crashes and resets and then connects five minutes later after reseting. forthly this is not an phone issue it is definatly software as i have been given an second 9720 and the fault is present on both phones.
can anyone help

as I believe it a car bluetooth hands free can only be paired to one device . ie if you wish to pair with another device you would have to reset back to default and search again.... so does the cuve work if you reset the bury and pair again but then your other phone does not work with it ... this is logical as if we drove down a motorway we would pick up loadsa phones.... therefor we can only pair to one device

Automotically Hands free mode is switching ON & OFF while conversation

Similar Messages

Maybe you are looking for