Automount in gnome

I have a problem with automatic mounting of dvd drive in gnome. When I insert blank DVD it says something's in but when it isn't blank, it doesn't mount it. USB drives mount automatically.In graphics environment as root doesn't the drive mount either.I always have to mount it as root in terminal with command "mount". I've tried it in KDE 4.1 and the DVD mounts and shows everything on it.
[karel@notebook ~]$ groups
lp video audio optical storage scanner power users
fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /mnt/cdrom auto ro,user,noauto,unhide 0 0
/dev/dvd /mnt/dvd auto ro,user,noauto,unhide 0 0
/dev/sda1 /boot ext2 defaults 0 1
/dev/sda2 swap swap defaults 0 0
/dev/sda3 / ext3 defaults 0 1
/dev/sda4 /home ext3 defaults 0 1
System is up to date.
Thanks for advice

I put DVD video
dmesg:
CPU0: Intel Genuine Intel(R) CPU T1350 @ 1.86GHz stepping 08
Brought up 1 CPUs
Total of 1 processors activated (3725.15 BogoMIPS).
net_namespace: 832 bytes
HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [C002] (0000:00)
PCI: 0000:00:02.0 reg 10 32bit mmio: [f4400000, f447ffff]
PCI: 0000:00:02.0 reg 14 io port: [4000, 4007]
PCI: 0000:00:02.0 reg 18 32bit mmio: [e0000000, efffffff]
PCI: 0000:00:02.0 reg 1c 32bit mmio: [f4480000, f44bffff]
PCI: 0000:00:02.1 reg 10 32bit mmio: [f4500000, f457ffff]
PCI: 0000:00:1b.0 reg 10 64bit mmio: [f4580000, f4583fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [4020, 403f]
PCI: 0000:00:1d.1 reg 20 io port: [4040, 405f]
PCI: 0000:00:1d.2 reg 20 io port: [4060, 407f]
PCI: 0000:00:1d.3 reg 20 io port: [4080, 409f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [f4584000, f45843ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
PCI: 0000:00:1f.1 reg 20 io port: [40a0, 40af]
PCI: 0000:00:1f.2 reg 10 io port: [13f0, 13f7]
PCI: 0000:00:1f.2 reg 14 io port: [15f4, 15f7]
PCI: 0000:00:1f.2 reg 18 io port: [1370, 1377]
PCI: 0000:00:1f.2 reg 1c io port: [1574, 1577]
PCI: 0000:00:1f.2 reg 20 io port: [40d0, 40df]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [f4585000, f45853ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:10:00.0 reg 10 32bit mmio: [f4000000, f4003fff]
pci 0000:10:00.0: supports D1
pci 0000:10:00.0: supports D2
PCI: bridge 0000:00:1c.1 32bit mmio: [f4000000, f40fffff]
PCI: bridge 0000:00:1c.3 io port: [2000, 3fff]
PCI: bridge 0000:00:1c.3 32bit mmio: [f0000000, f3ffffff]
PCI: 0000:02:06.0 reg 10 32bit mmio: [f4100000, f4100fff]
pci 0000:02:06.0: supports D1
pci 0000:02:06.0: supports D2
pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.0: PME# disabled
PCI: 0000:02:06.1 reg 10 32bit mmio: [f4101000, f41017ff]
PCI: 0000:02:06.1 reg 14 32bit mmio: [f4104000, f4107fff]
pci 0000:02:06.1: supports D1
pci 0000:02:06.1: supports D2
pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.1: PME# disabled
PCI: 0000:02:0e.0 reg 10 32bit mmio: [f4108000, f4109fff]
pci 0000:02:0e.0: supports D1
pci 0000:02:0e.0: supports D2
pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:0e.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 32bit mmio: [f4100000, f43fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C093._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0FC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C10C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C002.C112._PRT]
ACPI: PCI Interrupt Link [C108] (IRQs *10 11)
ACPI: PCI Interrupt Link [C109] (IRQs *10 11)
ACPI: PCI Interrupt Link [C10A] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C10B] (IRQs *10 11)
ACPI: PCI Interrupt Link [C124] (IRQs *10 11)
ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled.
ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20080609]
ACPI: Power Resource [C1F7] (on)
ACPI: Power Resource [C20D] (on)
ACPI: Power Resource [C216] (off)
ACPI: Power Resource [C2FF] (off)
ACPI: Power Resource [C300] (off)
ACPI: Power Resource [C301] (off)
ACPI: Power Resource [C302] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
ACPI: RTC can wake from S4
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xe0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x5f7fffff could not be reserved
system 00:09: ioport range 0x500-0x57f has been reserved
system 00:09: ioport range 0x800-0x80f has been reserved
system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x1000-0x107f has been reserved
system 00:0a: ioport range 0x1100-0x113f has been reserved
system 00:0a: ioport range 0x1200-0x121f has been reserved
system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
system 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:0a: iomem range 0xfed90000-0xfed9afff could not be reserved
system 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xf4000000-0xf40fffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:20
pci 0000:00:1c.3: IO window: 0x2000-0x3fff
pci 0000:00:1c.3: MEM window: 0xf0000000-0xf3ffffff
pci 0000:00:1c.3: PREFETCH window: disabled
pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:06.0: IO window: 0x005000-0x0050ff
pci 0000:02:06.0: IO window: 0x005400-0x0054ff
pci 0000:02:06.0: PREFETCH window: 0x60000000-0x63ffffff
pci 0000:02:06.0: MEM window: 0x64000000-0x67ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x5000-0x5fff
pci 0000:00:1e.0: MEM window: 0xf4100000-0xf43fffff
pci 0000:00:1e.0: PREFETCH window: 0x00000060000000-0x00000063ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 08 index 0 mmio: [0, 0]
bus: 08 index 1 mmio: [0, 0]
bus: 08 index 2 mmio: [0, 0]
bus: 08 index 3 mmio: [0, 0]
bus: 10 index 0 mmio: [0, 0]
bus: 10 index 1 mmio: [f4000000, f40fffff]
bus: 10 index 2 mmio: [0, 0]
bus: 10 index 3 mmio: [0, 0]
bus: 20 index 0 io port: [2000, 3fff]
bus: 20 index 1 mmio: [f0000000, f3ffffff]
bus: 20 index 2 mmio: [0, 0]
bus: 20 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [5000, 5fff]
bus: 02 index 1 mmio: [f4100000, f43fffff]
bus: 02 index 2 mmio: [60000000, 63ffffff]
bus: 02 index 3 io port: [0, ffff]
bus: 02 index 4 mmio: [0, ffffffff]
bus: 03 index 0 io port: [5000, 50ff]
bus: 03 index 1 io port: [5400, 54ff]
bus: 03 index 2 mmio: [60000000, 63ffffff]
bus: 03 index 3 mmio: [64000000, 67ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 760k freed
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1757
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:C20A,PNP0f13:C20B] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 284k freed
No dock devices found.
SCSI subsystem initialized
input: AT Translated Set 2 keyboard as /class/input/input1
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585100 irq 220
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
Switched to high resolution mode on CPU 0
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-7: HTS541060G9SA00, MB3OC60P, max UDMA/100
ata1.00: 117231408 sectors, multi 16: LBA48
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HTS541060G9SA00 MB3O PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40a0 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40a8 irq 15
ata5.00: ATAPI: MATSHITADVD-RAM UJ-840S, 1.11, max MWDMA2
ata5.00: configured for MWDMA2
ata6: port disabled. ignoring.
scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-840S 1.11 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 117231408 512-byte hardware sectors (60022 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 117231408 512-byte hardware sectors (60022 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4584000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004080
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 3-2: new low speed USB device using uhci_hcd and address 2
PM: Starting manual resume from disk
usb 3-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
PM: Starting manual resume from disk
input: Microsoft Microsoft Wireless Optical Mouse 1.00 as /class/input/input2
input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse 1.00] on usb-0000:00:1d.1-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
b43-pci-bridge 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
b43-pci-bridge 0000:10:00.0: setting latency timer to 64
ssb: Sonics Silicon Backplane found on PCI device 0000:10:00.0
b44 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:08:33:92:15
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
Marking TSC unstable due to TSC halts in idle
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
b43-phy0: Broadcom 4311 WLAN found
phy0: Selected rate control algorithm 'pid'
ACPI: AC Adapter [C1B3] (on-line)
Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
ACPI: Battery Slot [C1B5] (battery present)
ACPI: Battery Slot [C1B4] (battery absent)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [C234]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [C22D]
ACPI: Transitioning device [C303] to D3
fan PNP0C0B:00: registered as cooling_device1
ACPI: Fan [C303] (off)
ACPI: Transitioning device [C304] to D3
fan PNP0C0B:01: registered as cooling_device2
ACPI: Fan [C304] (off)
ACPI: Transitioning device [C305] to D3
fan PNP0C0B:02: registered as cooling_device3
ACPI: Fan [C305] (off)
ACPI: Transitioning device [C306] to D3
fan PNP0C0B:03: registered as cooling_device4
ACPI: Fan [C306] (off)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (50 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ1] (49 C)
thermal LNXTHERM:03: registered as thermal_zone2
ACPI: Thermal Zone [TZ2] (46 C)
thermal LNXTHERM:04: registered as thermal_zone3
ACPI: Thermal Zone [TZ3] (28 C)
thermal LNXTHERM:05: registered as thermal_zone4
ACPI: Thermal Zone [TZ4] (0 C)
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
ACPI: WMI: Mapper loaded
input: Video Bus as /class/input/input6
ACPI: Video Device [C080] (multi-head: yes rom: no post: no)
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
intel_rng: FWH not detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
Yenta: CardBus bridge found at 0000:02:06.0 [103c:30a2]
Yenta: Enabling burst memory read transactions
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01011b22, devctl 0x64
Error: Driver 'pcspkr' is already registered, aborting...
lp0: using parport0 (interrupt-driven).
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input7
Yenta: ISA IRQ mask 0x0c78, PCI irq 18
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
cs: IO port probe 0x5000-0x5fff: clean.
pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf43fffff
pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
input: PC Speaker as /class/input/input8
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ppdev: user-space parallel port driver
Error: Driver 'pcspkr' is already registered, aborting...
ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f4101000-f41017ff] Max Packet=[2048] IR/IT contexts=[4/8]
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bridge firewalling registered
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
mtrr: no MTRR for e0000000,10000000 found
mtrr: no MTRR for e0000000,10000000 found
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
usb 2-6: new high speed USB device using ehci_hcd and address 3
usb 2-6: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 6:0:0:0: Direct-Access WD 2500BB External 0108 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: unknown partition table
sd 6:0:0:0: [sdb] Attached SCSI disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdb, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
cdrom: This disc doesn't have any tracks I recognize!
warning: `growisofs' uses 32-bit capabilities (legacy support in use)
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cdrom: This disc doesn't have any tracks I recognize!
usb 2-6: USB disconnect, address 3
b44: eth0: Link is down.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
sr0: CDROM not ready. Make sure there is a disc in the drive.
sr0: CDROM not ready. Make sure there is a disc in the drive.
EDIT Added code tags MrG was here

Similar Messages

No automounting in gnome

Hi,
Got no automounting in gnome sure I can pmount ... but it used to load usbkeys automagically hal and dbus are set so
wondered if anyone else is having the same problem
MrG

Mr Green wrote:
Hi,
Got no automounting in gnome sure I can pmount ... but it used to load usbkeys automagically hal and dbus are set so
wondered if anyone else is having the same problem
MrG
My wife's PC has been showing the same symptoms for about a week now. She runs fam and I use gamin. My automount works great, so if that's any indication.....

Automount in Gnome 3.4.1 is broken

Hi all!
I have a strange issue with gnome 3.4.1 and automount on both my laptop and my PC.
When I plug an usbkey, I can hear the sound "plop" but nothing happen, no notification to open nautilus, and in nautilus, the usb device isn't showed, isn't mounted.
When is do lsusb, I can't see my usb key listed:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 005 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 005: ID 1e3d:8246
Bus 005 Device 003: ID 046d:c52e Logitech, Inc.
Bus 005 Device 004: ID 0b05:179c ASUSTek Computer, Inc.
but dmesg shows this:
[ 754.994691] usb 2-1.2: new high-speed USB device number 5 using ehci_hcd
[ 755.078996] scsi10 : usb-storage 2-1.2:1.0
[ 756.079519] scsi 10:0:0:0: Direct-Access YHS V88 5.00 PQ: 0 ANSI: 2
[ 756.080385] sd 10:0:0:0: [sdb] 8108032 512-byte logical blocks: (4.15 GB/3.86 GiB)
[ 756.080852] sd 10:0:0:0: [sdb] Write Protect is off
[ 756.080855] sd 10:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 756.081348] sd 10:0:0:0: [sdb] No Caching mode page present
[ 756.081350] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 756.083618] sd 10:0:0:0: [sdb] No Caching mode page present
[ 756.083621] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 756.084346] sdb: sdb1
[ 756.086987] sd 10:0:0:0: [sdb] No Caching mode page present
[ 756.086990] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 756.086991] sd 10:0:0:0: [sdb] Attached SCSI removable disk
I use systemd and udisks2.service is running well.
Do you have an idea of how I can correct this?

Sara wrote:
Vena wrote:Gnome 3.4.1 has just been moved to extra, and I must say that I'm quite disappointed. I don't see many new features, only new smooth scrolling (which is more annoying than useful tbh) and some GUI changes.
Gnome 3.4.1 is more impressive on a multitouch computer, given that GTK 3.4 has also been released (features multitouch support), and many of the gnome apps support scrolling with fingers now, which is unbelievably useful.
<OT>You know, this laptop is 4 years old, and I've been scrolling with fingers since the day I got it </OT>

Automounting in Gnome

Basically, I wan't to control what happens when I plug in a usb stick into my computer. Currently, Gnome displays a notification saying "Open folder with Thunar", which I want to change.
Problem is, I can't find where this is configured. I checked dconf-editor and in "org.gnome.desktop.media-handling" both automount and automount-open are checked. I also tried checking PolKit, but I have no rules on the system at all in /etc/polkit-1/rules.d , is this correct.
So, in summery, very simple question. How do I change the action presented to me by gnome when a removable media is added to the system?

You can define what to do in the settings, from GNOME. Open gnome-control-center -> Details -> removable media. It doesn't list automount per sé, but you can configure it to open the folder and more. It might be what you're looking for.
Other than that, perhaps Thunar doesn't work properly with gnome-desktop's way of detecting and mounting devices. It might be worth it to look into using Nautilus.

Automounting in Gnome. encoding problem

I have problems with encoding of automounting devices as cdroms and flashdrives with my local encoding
ru_RU.UTF-8. I have no before with the same configs on the KDE!
How can I solve my problem?

Using gconf-editor, go to /system/storage/default_options/vfat and add to mount_options the string "utf8".
That solved it for me.

[Solved] Permission issues for automounted devices in Gnome 3

I am unable to write into any device after it has been automounted in Gnome 3. I get the following error:
There was an error copying the file into /run/media/dhaval/3C2E3A4E2E3A0206. Permission denied.
I set up Gnome 3 according to the instructions in the wiki. Searching through the forums did not lead to any results.
This happens with all external devices and also with my internal secondary hard drive.
Last edited by dhavalparmar (2012-10-07 00:40:32)

Solved!!
Installed ntfs-3g and ntfsprogs. Everything works now.
Thank you so much everyone for helping me out!

Gnome 3 starting in fallbackmode

Hi all.
I've a Inspiron 9400 with a Radeon Mobility X1400 card. Gnome 3 starts in fallback it says that card have no accelerated support, but when I try a Fedora Live with Gnome 3 it starts correctly in standard mode.
I'm not using t xorg.conf file and I'm using the open source drivers xf86-video-ati (the same as Live Fedora).
Some logs:
$HOME/.xsession-errors
gnome-session-is-accelerated: No hardware 3D support.
gnome-session-check-accelerated: Helper exited with code 256
gnome-session[14033]: WARNING: Session 'gnome' runnable check failed: Salió con el código 1
gnome-session[14033]: EggSMClient-WARNING: Desktop file '/home/dani/.config/autostart/dropbox.desktop' has malformed Icon key 'dropbox.png'(should not include extension)
GNOME_KEYRING_CONTROL=/tmp/keyring-qcEhuG
GNOME_KEYRING_PID=14061
GNOME_KEYRING_CONTROL=/tmp/keyring-qcEhuG
GPG_AGENT_INFO=/tmp/keyring-qcEhuG/gpg:0:1
SSH_AUTH_SOCK=/tmp/keyring-qcEhuG/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-qcEhuG
GPG_AGENT_INFO=/tmp/keyring-qcEhuG/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-qcEhuG
GPG_AGENT_INFO=/tmp/keyring-qcEhuG/gpg:0:1
SSH_AUTH_SOCK=/tmp/keyring-qcEhuG/ssh
(gnome-settings-daemon:14062): keybindings-plugin-WARNING **: La combinación de teclas (screenreader) está incompleta
(gnome-settings-daemon:14062): keybindings-plugin-WARNING **: La combinación de teclas (magnifier) está incompleta
(gnome-settings-daemon:14062): keybindings-plugin-WARNING **: La combinación de teclas (onscreenkeyboard) está incompleta
WARNING: gnome-keyring:: no socket to connect to
** (gsynaptics-init:14149): WARNING **: Using synclient
[2011-12-11 19:22] [WARNING] System is not able to show notifications.
** (gnome-fallback-mount-helper:14135): DEBUG: Starting automounting manager
** (gnome-fallback-mount-helper:14135): DEBUG: Found ConsoleKit session at path /org/freedesktop/ConsoleKit/Session8
** (gnome-fallback-mount-helper:14135): DEBUG: ScreenSaver name vanished
** (gnome-fallback-mount-helper:14135): DEBUG: ConsoleKit session is active 1
Failed to play sound: File or data not found
** Message: applet now removed from the notification area
** (gnome-fallback-mount-helper:14135): DEBUG: ScreenSaver name appeared
** (gnome-fallback-mount-helper:14135): DEBUG: ScreenSaver proxy ready
** (gnome-fallback-mount-helper:14135): DEBUG: Screensaver GetActive() returned 0
** (nm-applet:14137): WARNING **: get_all_cb: couldn't retrieve system settings properties: (25) Launch helper exited with unknown return code 1.
** (nm-applet:14137): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
** (nm-applet:14137): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
QSystemTrayIcon::setVisible: No Icon set
** Message: applet now embedded in the notification area
** Message: applet now removed from the notification area
** (gnome-fallback-mount-helper:14135): DEBUG: ConsoleKit session is active 0
** (gnome-fallback-mount-helper:14135): DEBUG: ConsoleKit session is active 1
(gnome-settings-daemon:14062): color-plugin-WARNING **: Done switch to new account, reload devices
(exe:15399): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
/var/log/Xorg.0.log
[ 3488.635]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 3488.635] X Protocol Version 11, Revision 0
[ 3488.635] Build Operating System: Linux 3.1.5-1-ARCH i686
[ 3488.635] Current Operating System: Linux leize 3.1.5-1-ARCH #1 SMP PREEMPT Sun Dec 11 06:26:14 UTC 2011 i686
[ 3488.635] Kernel command line: root=/dev/sda2 ro vga=791
[ 3488.635] Build Date: 17 December 2011 09:38:27AM
[ 3488.635]
[ 3488.635] Current version of pixman: 0.24.0
[ 3488.635] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3488.636] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3488.636] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 21 19:22:21 2011
[ 3488.636] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3488.636] (==) No Layout section. Using the first Screen section.
[ 3488.636] (==) No screen section available. Using defaults.
[ 3488.636] (**) |-->Screen "Default Screen Section" (0)
[ 3488.636] (**) | |-->Monitor "<default monitor>"
[ 3488.636] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3488.636] (==) Automatically adding devices
[ 3488.636] (==) Automatically enabling devices
[ 3488.636] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3488.636] Entry deleted from font path.
[ 3488.637] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 3488.637] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3488.637] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3488.637] (II) Loader magic: 0x8228580
[ 3488.637] (II) Module ABI versions:
[ 3488.637] X.Org ANSI C Emulation: 0.4
[ 3488.637] X.Org Video Driver: 11.0
[ 3488.637] X.Org XInput driver : 13.0
[ 3488.637] X.Org Server Extension : 6.0
[ 3488.638] (--) PCI:*(0:1:0:0) 1002:7145:1028:2002 rev 0, Mem @ 0xd0000000/268435456, 0xefdf0000/65536, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
[ 3488.638] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3488.638] (II) LoadModule: "extmod"
[ 3488.638] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 3488.638] (II) Module extmod: vendor="X.Org Foundation"
[ 3488.638] compiled for 1.11.3, module version = 1.0.0
[ 3488.638] Module class: X.Org Server Extension
[ 3488.638] ABI class: X.Org Server Extension, version 6.0
[ 3488.638] (II) Loading extension MIT-SCREEN-SAVER
[ 3488.638] (II) Loading extension XFree86-VidModeExtension
[ 3488.638] (II) Loading extension XFree86-DGA
[ 3488.638] (II) Loading extension DPMS
[ 3488.638] (II) Loading extension XVideo
[ 3488.638] (II) Loading extension XVideo-MotionCompensation
[ 3488.638] (II) Loading extension X-Resource
[ 3488.638] (II) LoadModule: "dbe"
[ 3488.639] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 3488.639] (II) Module dbe: vendor="X.Org Foundation"
[ 3488.639] compiled for 1.11.3, module version = 1.0.0
[ 3488.639] Module class: X.Org Server Extension
[ 3488.639] ABI class: X.Org Server Extension, version 6.0
[ 3488.639] (II) Loading extension DOUBLE-BUFFER
[ 3488.639] (II) LoadModule: "glx"
[ 3488.639] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3488.639] (II) Module glx: vendor="X.Org Foundation"
[ 3488.639] compiled for 1.11.3, module version = 1.0.0
[ 3488.639] ABI class: X.Org Server Extension, version 6.0
[ 3488.639] (==) AIGLX enabled
[ 3488.639] (II) Loading extension GLX
[ 3488.639] (II) LoadModule: "record"
[ 3488.639] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 3488.639] (II) Module record: vendor="X.Org Foundation"
[ 3488.639] compiled for 1.11.3, module version = 1.13.0
[ 3488.639] Module class: X.Org Server Extension
[ 3488.639] ABI class: X.Org Server Extension, version 6.0
[ 3488.639] (II) Loading extension RECORD
[ 3488.640] (II) LoadModule: "dri"
[ 3488.640] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 3488.640] (II) Module dri: vendor="X.Org Foundation"
[ 3488.640] compiled for 1.11.3, module version = 1.0.0
[ 3488.640] ABI class: X.Org Server Extension, version 6.0
[ 3488.640] (II) Loading extension XFree86-DRI
[ 3488.640] (II) LoadModule: "dri2"
[ 3488.640] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 3488.640] (II) Module dri2: vendor="X.Org Foundation"
[ 3488.640] compiled for 1.11.3, module version = 1.2.0
[ 3488.640] ABI class: X.Org Server Extension, version 6.0
[ 3488.640] (II) Loading extension DRI2
[ 3488.640] (==) Matched ati as autoconfigured driver 0
[ 3488.640] (==) Matched vesa as autoconfigured driver 1
[ 3488.640] (==) Matched fbdev as autoconfigured driver 2
[ 3488.640] (==) Assigned the driver to the xf86ConfigLayout
[ 3488.640] (II) LoadModule: "ati"
[ 3488.641] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 3488.641] (II) Module ati: vendor="X.Org Foundation"
[ 3488.641] compiled for 1.11.1.902, module version = 6.14.3
[ 3488.641] Module class: X.Org Video Driver
[ 3488.641] ABI class: X.Org Video Driver, version 11.0
[ 3488.641] (II) LoadModule: "radeon"
[ 3488.641] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 3488.641] (II) Module radeon: vendor="X.Org Foundation"
[ 3488.641] compiled for 1.11.1.902, module version = 6.14.3
[ 3488.641] Module class: X.Org Video Driver
[ 3488.641] ABI class: X.Org Video Driver, version 11.0
[ 3488.641] (II) LoadModule: "vesa"
[ 3488.642] (WW) Warning, couldn't open module vesa
[ 3488.642] (II) UnloadModule: "vesa"
[ 3488.642] (II) Unloading vesa
[ 3488.642] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3488.642] (II) LoadModule: "fbdev"
[ 3488.642] (WW) Warning, couldn't open module fbdev
[ 3488.642] (II) UnloadModule: "fbdev"
[ 3488.642] (II) Unloading fbdev
[ 3488.642] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3488.642] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS
[ 3488.647] (++) using VT number 7
[ 3488.672] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 3488.672] (II) [KMS] drm report modesetting isn't supported.
[ 3488.672] (II) RADEON(0): TOTO SAYS 00000000efdf0000
[ 3488.672] (II) RADEON(0): MMIO registers at 0x00000000efdf0000: size 64KB
[ 3488.672] (II) RADEON(0): PCI bus 1 card 0 func 0
[ 3488.672] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3488.672] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 3488.672] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 3488.672] (==) RADEON(0): Default visual is TrueColor
[ 3488.672] (II) Loading sub module "vgahw"
[ 3488.672] (II) LoadModule: "vgahw"
[ 3488.672] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 3488.673] (II) Module vgahw: vendor="X.Org Foundation"
[ 3488.673] compiled for 1.11.3, module version = 0.1.0
[ 3488.673] ABI class: X.Org Video Driver, version 11.0
[ 3488.673] (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 3488.673] (==) RADEON(0): RGB weight 888
[ 3488.673] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 3488.673] (--) RADEON(0): Chipset: "ATI Mobility Radeon X1400" (ChipID = 0x7145)
[ 3488.673] (--) RADEON(0): Linear framebuffer at 0x00000000d0000000
[ 3488.673] (II) RADEON(0): PCIE card detected
[ 3488.673] (II) Loading sub module "int10"
[ 3488.673] (II) LoadModule: "int10"
[ 3488.673] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 3488.673] (II) Module int10: vendor="X.Org Foundation"
[ 3488.673] compiled for 1.11.3, module version = 1.0.0
[ 3488.673] ABI class: X.Org Video Driver, version 11.0
[ 3488.673] (II) RADEON(0): initializing int10
[ 3488.674] (II) RADEON(0): Primary V_BIOS segment is: 0xc000
[ 3488.674] (II) RADEON(0): ATOM BIOS detected
[ 3488.674] (II) RADEON(0): ATOM BIOS Rom:
[ 3488.674] SubsystemVendorID: 0x1028 SubsystemID: 0x2002
[ 3488.674] IOBaseAddress: 0xee00
[ 3488.674] Filename: BR19350.bin
[ 3488.674] BIOS Bootup Message:
ATI Mobility Radeon X1400
[ 3488.674] (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
[ 3488.674] (II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
[ 3488.674] (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
[ 3488.674] (II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
[ 3488.674] (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
[ 3488.674] (II) RADEON(0): Default Engine Clock: 432000
[ 3488.674] (II) RADEON(0): Default Memory Clock: 396000
[ 3488.674] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
[ 3488.674] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
[ 3488.674] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
[ 3488.674] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
[ 3488.674] (II) RADEON(0): Maximum Pixel Clock: 400000
[ 3488.674] (II) RADEON(0): Reference Clock: 27000
[ 3488.674] drmOpenDevice: node name is /dev/dri/card0
[ 3488.675] drmOpenDevice: open result is 10, (OK)
[ 3488.676] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 3488.676] drmOpenDevice: node name is /dev/dri/card0
[ 3488.676] drmOpenDevice: open result is 10, (OK)
[ 3488.676] drmOpenByBusid: drmOpenMinor returns 10
[ 3488.676] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 3488.677] (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.33.0
[ 3488.677] (==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
[ 3488.677] (II) RADEON(0): Will try to use DMA for Xv image transfers
[ 3488.677] (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
[ 3488.677] (II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
[ 3488.677] (--) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
[ 3488.677] (II) RADEON(0): Color tiling enabled by default
[ 3488.677] (II) Loading sub module "ddc"
[ 3488.677] (II) LoadModule: "ddc"
[ 3488.677] (II) Module "ddc" already built-in
[ 3488.677] (II) Loading sub module "i2c"
[ 3488.677] (II) LoadModule: "i2c"
[ 3488.677] (II) Module "i2c" already built-in
[ 3488.677] (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=90000 max=110000; xclk=40000
[ 3488.677] (WW) RADEON(0): LVDS Info:
XRes: 1440, YRes: 900, DotClock: 96210
HBlank: 320, HOverPlus: 64, HSyncWidth: 32
VBlank: 12, VOverPlus: 1, VSyncWidth: 3
[ 3488.677] (II) RADEON(0): Skipping TV-Out
[ 3488.677] (II) RADEON(0): Skipping Component Video
[ 3488.677] (II) RADEON(0): Output VGA-0 has no monitor section
[ 3488.678] (II) RADEON(0): I2C bus "VGA-0" initialized.
[ 3488.678] (II) RADEON(0): Output LVDS has no monitor section
[ 3488.678] (II) RADEON(0): I2C bus "LVDS" initialized.
[ 3488.678] (II) RADEON(0): Output DVI-0 has no monitor section
[ 3488.678] (II) RADEON(0): I2C bus "DVI-0" initialized.
[ 3488.678] (II) RADEON(0): Port0:
[ 3488.678] XRANDR name: VGA-0
[ 3488.678] Connector: VGA
[ 3488.678] CRT1: INTERNAL_KLDSCP_DAC1
[ 3488.678] DDC reg: 0x7e40
[ 3488.678] (II) RADEON(0): Port1:
[ 3488.678] XRANDR name: LVDS
[ 3488.678] Connector: LVDS
[ 3488.678] LCD1: INTERNAL_LVTM1
[ 3488.678] DDC reg: 0x7e30
[ 3488.678] (II) RADEON(0): Port2:
[ 3488.678] XRANDR name: DVI-0
[ 3488.678] Connector: DVI-I
[ 3488.678] CRT2: INTERNAL_KLDSCP_DAC2
[ 3488.678] DFP1: INTERNAL_KLDSCP_TMDS1
[ 3488.678] DDC reg: 0x7e50
[ 3488.678] (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
[ 3488.716] Dac detection success
[ 3488.716] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[ 3488.716] finished output detect: 0
[ 3488.716] (II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
[ 3488.789] (II) RADEON(0): EDID for output LVDS
[ 3488.789] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3488.789] (II) RADEON(0): Year: 2005 Week: 0
[ 3488.789] (II) RADEON(0): EDID Version: 1.3
[ 3488.789] (II) RADEON(0): Digital Display Input
[ 3488.789] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3488.789] (II) RADEON(0): Gamma: 2.20
[ 3488.789] (II) RADEON(0): No DPMS capabilities specified
[ 3488.789] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3488.789] (II) RADEON(0): First detailed timing is preferred mode
[ 3488.789] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3488.789] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3488.789] (II) RADEON(0): Manufacturer's mask: 0
[ 3488.789] (II) RADEON(0): Supported detailed timing:
[ 3488.789] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 23000 mm
[ 3488.789] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3488.789] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3488.789] (II) RADEON(0): WR539171WX2
[ 3488.789] (II) RADEON(0): &5@Im
[ 3488.789] (II) RADEON(0): EDID (in hex):
[ 3488.789] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3488.789] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3488.789] (II) RADEON(0): 24505400000001010101010101010101
[ 3488.789] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3488.789] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3488.789] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3488.789] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3488.789] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3488.789] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[ 3488.789] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[ 3488.789] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3488.789] (II) RADEON(0): Year: 2005 Week: 0
[ 3488.789] (II) RADEON(0): EDID Version: 1.3
[ 3488.789] (II) RADEON(0): Digital Display Input
[ 3488.789] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3488.789] (II) RADEON(0): Gamma: 2.20
[ 3488.789] (II) RADEON(0): No DPMS capabilities specified
[ 3488.789] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3488.789] (II) RADEON(0): First detailed timing is preferred mode
[ 3488.789] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3488.789] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3488.789] (II) RADEON(0): Manufacturer's mask: 0
[ 3488.789] (II) RADEON(0): Supported detailed timing:
[ 3488.789] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 2300000 mm
[ 3488.789] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3488.789] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3488.789] (II) RADEON(0): WR539171WX2
[ 3488.789] (II) RADEON(0): &5@Im
[ 3488.789] (II) RADEON(0): EDID (in hex):
[ 3488.789] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3488.789] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3488.789] (II) RADEON(0): 24505400000001010101010101010101
[ 3488.789] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3488.789] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3488.789] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3488.789] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3488.789] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3488.789] finished output detect: 1
[ 3488.790] (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
[ 3488.827] Dac detection success
[ 3488.827] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[ 3488.827] Unhandled monitor type 0
[ 3488.827] finished output detect: 2
[ 3488.827] finished all detect
[ 3488.866] Dac detection success
[ 3488.866] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[ 3488.866] (II) RADEON(0): EDID for output VGA-0
[ 3488.938] (II) RADEON(0): EDID for output LVDS
[ 3488.939] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3488.939] (II) RADEON(0): Year: 2005 Week: 0
[ 3488.939] (II) RADEON(0): EDID Version: 1.3
[ 3488.939] (II) RADEON(0): Digital Display Input
[ 3488.939] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3488.939] (II) RADEON(0): Gamma: 2.20
[ 3488.939] (II) RADEON(0): No DPMS capabilities specified
[ 3488.939] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3488.939] (II) RADEON(0): First detailed timing is preferred mode
[ 3488.939] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3488.939] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3488.939] (II) RADEON(0): Manufacturer's mask: 0
[ 3488.939] (II) RADEON(0): Supported detailed timing:
[ 3488.939] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 23000 mm
[ 3488.939] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3488.939] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3488.939] (II) RADEON(0): WR539171WX2
[ 3488.939] (II) RADEON(0): &5@Im
[ 3488.939] (II) RADEON(0): EDID (in hex):
[ 3488.939] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3488.939] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3488.939] (II) RADEON(0): 24505400000001010101010101010101
[ 3488.939] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3488.939] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3488.939] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3488.939] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3488.939] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3488.939] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[ 3488.939] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[ 3488.939] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3488.939] (II) RADEON(0): Year: 2005 Week: 0
[ 3488.939] (II) RADEON(0): EDID Version: 1.3
[ 3488.939] (II) RADEON(0): Digital Display Input
[ 3488.939] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3488.939] (II) RADEON(0): Gamma: 2.20
[ 3488.939] (II) RADEON(0): No DPMS capabilities specified
[ 3488.939] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3488.939] (II) RADEON(0): First detailed timing is preferred mode
[ 3488.939] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3488.939] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3488.939] (II) RADEON(0): Manufacturer's mask: 0
[ 3488.939] (II) RADEON(0): Supported detailed timing:
[ 3488.939] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 2300000 mm
[ 3488.939] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3488.939] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3488.939] (II) RADEON(0): WR539171WX2
[ 3488.939] (II) RADEON(0): &5@Im
[ 3488.939] (II) RADEON(0): EDID (in hex):
[ 3488.939] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3488.939] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3488.939] (II) RADEON(0): 24505400000001010101010101010101
[ 3488.939] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3488.939] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3488.939] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3488.939] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3488.939] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3488.939] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3488.939] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3488.939] (II) RADEON(0): Printing probed modes for output LVDS
[ 3488.939] (II) RADEON(0): Modeline "1440x900"x59.9 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 3488.940] (II) RADEON(0): Modeline "1280x854"x59.9 89.25 1280 1352 1480 1680 854 857 867 887 -hsync +vsync (53.1 kHz)
[ 3488.940] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 3488.940] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 3488.940] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 3488.940] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 3488.940] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 3488.940] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 3488.977] Dac detection success
[ 3488.977] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[ 3488.977] Unhandled monitor type 0
[ 3488.977] (II) RADEON(0): EDID for output DVI-0
[ 3488.977] (II) RADEON(0): Output VGA-0 disconnected
[ 3488.977] (II) RADEON(0): Output LVDS connected
[ 3488.977] (II) RADEON(0): Output DVI-0 disconnected
[ 3488.977] (II) RADEON(0): Using exact sizes for initial modes
[ 3488.977] (II) RADEON(0): Output LVDS using initial mode 1440x900
[ 3488.977] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 3488.977] (==) RADEON(0): DPI set to (96, 96)
[ 3488.977] (II) Loading sub module "fb"
[ 3488.977] (II) LoadModule: "fb"
[ 3488.978] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3488.978] (II) Module fb: vendor="X.Org Foundation"
[ 3488.978] compiled for 1.11.3, module version = 1.0.0
[ 3488.978] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3488.978] (II) Loading sub module "ramdac"
[ 3488.978] (II) LoadModule: "ramdac"
[ 3488.978] (II) Module "ramdac" already built-in
[ 3488.978] (==) RADEON(0): Using EXA acceleration architecture
[ 3488.978] (II) Loading sub module "exa"
[ 3488.978] (II) LoadModule: "exa"
[ 3488.978] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 3488.978] (II) Module exa: vendor="X.Org Foundation"
[ 3488.978] compiled for 1.11.3, module version = 2.5.0
[ 3488.978] ABI class: X.Org Video Driver, version 11.0
[ 3488.978] (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
[ 3488.978] (--) Depth 24 pixmap format is 32 bpp
[ 3488.978] (II) RADEON(0): RADEONScreenInit d0000000 0 0
[ 3489.284] Output LCD1 disable success
[ 3489.295] Blank CRTC 0 success
[ 3489.295] Disable CRTC 0 success
[ 3489.295] Blank CRTC 1 success
[ 3489.295] Disable CRTC 1 success
[ 3489.295] (II) RADEON(0): Dynamic Power Management Disabled
[ 3489.295] (==) RADEON(0): Using 24 bit depth buffer
[ 3489.295] (II) RADEON(0): RADEONInitMemoryMap() :
[ 3489.295] (II) RADEON(0): mem_size : 0x08000000
[ 3489.295] (II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
[ 3489.295] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 3489.295] (II) RADEON(0): Depth moves disabled by default
[ 3489.295] (II) RADEON(0): Allocating from a screen of 131040 kb
[ 3489.295] (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00816000
[ 3489.295] (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x0081a000
[ 3489.295] (II) RADEON(0): Will use 8280 kb for front buffer at offset 0x00000000
[ 3489.295] (II) RADEON(0): Will use 32 kb for PCI GART at offset 0x07ff8000
[ 3489.295] (II) RADEON(0): Will use 8280 kb for back buffer at offset 0x0081e000
[ 3489.295] (II) RADEON(0): Will use 8280 kb for depth buffer at offset 0x01034000
[ 3489.295] (II) RADEON(0): Will use 52736 kb for textures at offset 0x0184a000
[ 3489.295] (II) RADEON(0): Will use 53432 kb for X Server offscreen at offset 0x04bca000
[ 3489.296] drmOpenDevice: node name is /dev/dri/card0
[ 3489.296] drmOpenDevice: open result is 10, (OK)
[ 3489.297] drmOpenDevice: node name is /dev/dri/card0
[ 3489.298] drmOpenDevice: open result is 10, (OK)
[ 3489.298] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 3489.298] drmOpenDevice: node name is /dev/dri/card0
[ 3489.299] drmOpenDevice: open result is 10, (OK)
[ 3489.299] drmOpenByBusid: drmOpenMinor returns 10
[ 3489.299] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 3489.299] (II) [drm] DRM interface version 1.4
[ 3489.299] (II) [drm] DRM open master succeeded.
[ 3489.299] (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
[ 3489.299] (II) RADEON(0): [drm] framebuffer handle = 0xd0000000
[ 3489.299] (II) RADEON(0): [drm] added 1 reserved context for kernel
[ 3489.299] (II) RADEON(0): X context handle = 0x1
[ 3489.299] (II) RADEON(0): [drm] installed DRM signal handler
[ 3489.316] (II) RADEON(0): [pci] 32768 kB allocated with handle 0xf9ed9000
[ 3489.317] (II) RADEON(0): [pci] ring handle = 0xf9ed9000
[ 3489.317] (II) RADEON(0): [pci] Ring mapped at 0xb6fcf000
[ 3489.317] (II) RADEON(0): [pci] Ring contents 0x00000000
[ 3489.317] (II) RADEON(0): [pci] ring read ptr handle = 0xf9fda000
[ 3489.317] (II) RADEON(0): [pci] Ring read ptr mapped at 0xb76f7000
[ 3489.317] (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
[ 3489.317] (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf9fdb000
[ 3489.317] (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xaed21000
[ 3489.317] (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
[ 3489.317] (II) RADEON(0): [pci] GART texture map handle = 0xfa1db000
[ 3489.317] (II) RADEON(0): [pci] GART Texture map mapped at 0xad0a1000
[ 3489.317] (II) RADEON(0): [drm] register handle = 0x2dfbe000
[ 3489.317] (II) RADEON(0): [dri] Visual configs initialized
[ 3489.317] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[ 3489.317] (II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
[ 3489.317] (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
[ 3489.317] (==) RADEON(0): Backing store disabled
[ 3489.317] (II) RADEON(0): [DRI] installation complete
[ 3489.320] (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
[ 3489.320] (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
[ 3489.320] (II) RADEON(0): [drm] dma control initialized, using IRQ 16
[ 3489.320] (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
[ 3489.320] (WW) RADEON(0): DRI init changed memory map, adjusting ...
[ 3489.320] (WW) RADEON(0): MC_FB_LOCATION was: 0xd7ffd000 is: 0xd7ffd000
[ 3489.320] (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
[ 3489.320] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[ 3489.320] (II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
[ 3489.320] (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
[ 3489.320] (II) RADEON(0): Direct rendering enabled
[ 3489.320] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 3489.320] (II) RADEON(0): Setting EXA maxPitchBytes
[ 3489.320] (II) RADEON(0): num quad-pipes is 1
[ 3489.320] (II) EXA(0): Offscreen pixmap area of 54714368 bytes
[ 3489.320] (II) EXA(0): Driver registered support for the following operations:
[ 3489.320] (II) Solid
[ 3489.320] (II) Copy
[ 3489.320] (II) Composite (RENDER acceleration)
[ 3489.320] (II) UploadToScreen
[ 3489.320] (II) DownloadFromScreen
[ 3489.320] (II) RADEON(0): Acceleration enabled
[ 3489.320] (==) RADEON(0): DPMS enabled
[ 3489.320] (==) RADEON(0): Silken mouse enabled
[ 3489.320] (II) RADEON(0): Set up textured video
[ 3489.320] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 3489.320] (II) RADEON(0): [XvMC] Extension initialized.
[ 3489.325] Output CRT1 disable success
[ 3489.325] Output LCD1 disable success
[ 3489.325] Blank CRTC 0 success
[ 3489.325] Disable CRTC 0 success
[ 3489.325] Blank CRTC 1 success
[ 3489.325] Disable CRTC 1 success
[ 3489.325] Output LCD1 disable success
[ 3489.325] Blank CRTC 0 success
[ 3489.325] Disable CRTC 0 success
[ 3489.325] Set CRTC 0 Source success
[ 3489.325] Mode 1440x900 - 1760 912 10
[ 3489.325] (II) RADEON(0): RADEONRestoreMemMapRegisters() :
[ 3489.325] (II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
[ 3489.325] (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
[ 3489.325] Picked PLL 0
[ 3489.325] best_freq: 96340
[ 3489.325] best_feedback_div: 157
[ 3489.325] best_frac_feedback_div: 0
[ 3489.325] best_ref_div: 4
[ 3489.325] best_post_div: 11
[ 3489.325] (II) RADEON(0): crtc(0) Clock: mode 96210, PLL 963400
[ 3489.325] (II) RADEON(0): crtc(0) PLL : refdiv 4, fbdiv 0x9D(157), fracfbdiv 0, pdiv 11
[ 3489.328] Set CRTC 0 PLL success
[ 3489.328] Set CRTC Timing success
[ 3489.328] Set CRTC 0 Overscan success
[ 3489.328] Not using RMX
[ 3489.328] scaler 0 setup success
[ 3489.328] Set CRTC 0 Source success
[ 3489.328] crtc 0 YUV disable setup success
[ 3489.329] Output digital setup success
[ 3489.788] Output LCD1 enable success
[ 3489.788] Enable CRTC 0 success
[ 3489.804] Unblank CRTC 0 success
[ 3489.804] Output CRT1 disable success
[ 3489.804] Blank CRTC 1 success
[ 3489.804] Disable CRTC 1 success
[ 3489.805] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3489.805] (--) RandR disabled
[ 3489.805] (II) Initializing built-in extension Generic Event Extension
[ 3489.805] (II) Initializing built-in extension SHAPE
[ 3489.805] (II) Initializing built-in extension MIT-SHM
[ 3489.805] (II) Initializing built-in extension XInputExtension
[ 3489.805] (II) Initializing built-in extension XTEST
[ 3489.805] (II) Initializing built-in extension BIG-REQUESTS
[ 3489.805] (II) Initializing built-in extension SYNC
[ 3489.805] (II) Initializing built-in extension XKEYBOARD
[ 3489.805] (II) Initializing built-in extension XC-MISC
[ 3489.805] (II) Initializing built-in extension SECURITY
[ 3489.805] (II) Initializing built-in extension XINERAMA
[ 3489.805] (II) Initializing built-in extension XFIXES
[ 3489.805] (II) Initializing built-in extension RENDER
[ 3489.805] (II) Initializing built-in extension RANDR
[ 3489.805] (II) Initializing built-in extension COMPOSITE
[ 3489.805] (II) Initializing built-in extension DAMAGE
[ 3489.818] (II) AIGLX: Screen 0 is not DRI2 capable
[ 3489.818] drmOpenDevice: node name is /dev/dri/card0
[ 3489.818] drmOpenDevice: open result is 11, (OK)
[ 3489.818] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 3489.818] drmOpenDevice: node name is /dev/dri/card0
[ 3489.818] drmOpenDevice: open result is 11, (OK)
[ 3489.818] drmOpenByBusid: drmOpenMinor returns 11
[ 3489.818] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 3489.818] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 3489.836] (EE) AIGLX error: Calling driver entry point failed
[ 3489.853] (EE) AIGLX: reverting to software rendering
[ 3489.856] (II) AIGLX: Loaded and initialized swrast
[ 3489.856] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 3489.857] (II) RADEON(0): Setting screen physical size to 380 x 238
[ 3490.017] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 3490.017] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3490.017] (II) LoadModule: "evdev"
[ 3490.018] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.018] (II) Module evdev: vendor="X.Org Foundation"
[ 3490.018] compiled for 1.10.99.902, module version = 2.6.0
[ 3490.018] Module class: X.Org XInput Driver
[ 3490.018] ABI class: X.Org XInput driver, version 13.0
[ 3490.018] (II) Using input driver 'evdev' for 'Video Bus'
[ 3490.018] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.018] (**) Video Bus: always reports core events
[ 3490.018] (**) Video Bus: Device: "/dev/input/event4"
[ 3490.018] (--) Video Bus: Found keys
[ 3490.018] (II) Video Bus: Configuring as keyboard
[ 3490.018] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2b/LNXVIDEO:00/input/input4/event4"
[ 3490.018] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 3490.018] (**) Option "xkb_rules" "evdev"
[ 3490.018] (**) Option "xkb_model" "evdev"
[ 3490.018] (**) Option "xkb_layout" "us"
[ 3490.078] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 3490.078] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3490.078] (II) Using input driver 'evdev' for 'Power Button'
[ 3490.078] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.078] (**) Power Button: always reports core events
[ 3490.078] (**) Power Button: Device: "/dev/input/event2"
[ 3490.078] (--) Power Button: Found keys
[ 3490.078] (II) Power Button: Configuring as keyboard
[ 3490.078] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 3490.078] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 3490.078] (**) Option "xkb_rules" "evdev"
[ 3490.079] (**) Option "xkb_model" "evdev"
[ 3490.079] (**) Option "xkb_layout" "us"
[ 3490.079] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 3490.079] (II) No input driver/identifier specified (ignoring)
[ 3490.080] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 3490.080] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3490.080] (II) Using input driver 'evdev' for 'Sleep Button'
[ 3490.080] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.080] (**) Sleep Button: always reports core events
[ 3490.080] (**) Sleep Button: Device: "/dev/input/event3"
[ 3490.080] (--) Sleep Button: Found keys
[ 3490.080] (II) Sleep Button: Configuring as keyboard
[ 3490.080] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 3490.080] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 3490.080] (**) Option "xkb_rules" "evdev"
[ 3490.080] (**) Option "xkb_model" "evdev"
[ 3490.080] (**) Option "xkb_layout" "us"
[ 3490.080] (II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event7)
[ 3490.080] (II) No input driver/identifier specified (ignoring)
[ 3490.081] (II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event8)
[ 3490.081] (II) No input driver/identifier specified (ignoring)
[ 3490.081] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event9)
[ 3490.081] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 3490.081] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 3490.081] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.081] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 3490.081] (**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event9"
[ 3490.081] (--) Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[ 3490.081] (--) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 3490.081] (--) Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 3490.081] (--) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 3490.082] (II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 3490.082] (II) Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 3490.082] (**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 3490.082] (**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3490.082] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input9/event9"
[ 3490.082] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 3490.082] (II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 3490.082] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 3490.082] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 3490.082] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 3490.082] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 3490.082] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1)
[ 3490.082] (II) No input driver/identifier specified (ignoring)
[ 3490.083] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3490.083] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3490.083] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3490.083] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.083] (**) AT Translated Set 2 keyboard: always reports core events
[ 3490.083] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3490.083] (--) AT Translated Set 2 keyboard: Found keys
[ 3490.083] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 3490.083] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3490.083] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 3490.083] (**) Option "xkb_rules" "evdev"
[ 3490.083] (**) Option "xkb_model" "evdev"
[ 3490.083] (**) Option "xkb_layout" "us"
[ 3490.084] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 3490.084] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3490.084] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3490.084] (II) LoadModule: "synaptics"
[ 3490.084] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3490.084] (II) Module synaptics: vendor="X.Org Foundation"
[ 3490.084] compiled for 1.11.0, module version = 1.5.0
[ 3490.084] Module class: X.Org XInput Driver
[ 3490.084] ABI class: X.Org XInput driver, version 13.0
[ 3490.084] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3490.084] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3490.084] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3490.084] (**) Option "Device" "/dev/input/event6"
[ 3490.296] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 3490.296] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 3490.296] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3490.296] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 3490.296] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 3490.296] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3490.296] (**) Option "TapButton1" "1"
[ 3490.296] (**) Option "TapButton2" "2"
[ 3490.296] (**) Option "TapButton3" "3"
[ 3490.403] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3490.403] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3490.509] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 3490.509] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 3490.509] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3490.509] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 3490.509] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 3490.510] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3490.510] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3490.510] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3490.510] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3490.510] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3490.510] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3490.510] (II) No input driver/identifier specified (ignoring)
[ 3490.511] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[ 3490.511] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 3490.511] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 3490.511] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3490.511] (**) Dell WMI hotkeys: always reports core events
[ 3490.511] (**) Dell WMI hotkeys: Device: "/dev/input/event5"
[ 3490.511] (--) Dell WMI hotkeys: Found keys
[ 3490.511] (II) Dell WMI hotkeys: Configuring as keyboard
[ 3490.511] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 3490.511] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[ 3490.511] (**) Option "xkb_rules" "evdev"
[ 3490.511] (**) Option "xkb_model" "evdev"
[ 3490.511] (**) Option "xkb_layout" "us"
[ 3497.781] Dac detection success
[ 3497.781] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[ 3497.842] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3497.842] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3497.842] (II) RADEON(0): Printing DDC gathered Modelines:
[ 3497.842] (II) RADEON(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 3497.842] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[ 3497.842] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[ 3497.842] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3497.842] (II) RADEON(0): Year: 2005 Week: 0
[ 3497.842] (II) RADEON(0): EDID Version: 1.3
[ 3497.842] (II) RADEON(0): Digital Display Input
[ 3497.842] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3497.842] (II) RADEON(0): Gamma: 2.20
[ 3497.842] (II) RADEON(0): No DPMS capabilities specified
[ 3497.842] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3497.842] (II) RADEON(0): First detailed timing is preferred mode
[ 3497.842] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3497.842] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3497.842] (II) RADEON(0): Manufacturer's mask: 0
[ 3497.842] (II) RADEON(0): Supported detailed timing:
[ 3497.842] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 2300000 mm
[ 3497.842] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3497.842] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3497.842] (II) RADEON(0): WR539171WX2
[ 3497.842] (II) RADEON(0): &5@Im
[ 3497.842] (II) RADEON(0): EDID (in hex):
[ 3497.842] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3497.842] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3497.842] (II) RADEON(0): 24505400000001010101010101010101
[ 3497.842] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3497.842] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3497.843] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3497.843] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3497.843] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3497.843] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3497.843] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3497.876] Dac detection success
[ 3497.876] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[ 3497.876] Unhandled monitor type 0
[ 3497.920] Dac detection success
[ 3497.920] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[ 3497.980] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3497.980] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3497.980] (II) RADEON(0): Printing DDC gathered Modelines:
[ 3497.980] (II) RADEON(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 3497.980] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[ 3497.980] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[ 3497.980] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3497.980] (II) RADEON(0): Year: 2005 Week: 0
[ 3497.980] (II) RADEON(0): EDID Version: 1.3
[ 3497.980] (II) RADEON(0): Digital Display Input
[ 3497.980] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3497.980] (II) RADEON(0): Gamma: 2.20
[ 3497.980] (II) RADEON(0): No DPMS capabilities specified
[ 3497.980] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3497.980] (II) RADEON(0): First detailed timing is preferred mode
[ 3497.980] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3497.980] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3497.980] (II) RADEON(0): Manufacturer's mask: 0
[ 3497.980] (II) RADEON(0): Supported detailed timing:
[ 3497.980] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 2300000 mm
[ 3497.981] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3497.981] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3497.981] (II) RADEON(0): WR539171WX2
[ 3497.981] (II) RADEON(0): &5@Im
[ 3497.981] (II) RADEON(0): EDID (in hex):
[ 3497.981] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3497.981] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3497.981] (II) RADEON(0): 24505400000001010101010101010101
[ 3497.981] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3497.981] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3497.981] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3497.981] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3497.981] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3497.981] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3497.981] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3498.015] Dac detection success
[ 3498.015] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[ 3498.015] Unhandled monitor type 0
[ 3498.063] Dac detection success
[ 3498.063] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[ 3498.124] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3498.124] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3498.124] (II) RADEON(0): Printing DDC gathered Modelines:
[ 3498.124] (II) RADEON(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 3498.124] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[ 3498.124] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[ 3498.124] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3498.124] (II) RADEON(0): Year: 2005 Week: 0
[ 3498.124] (II) RADEON(0): EDID Version: 1.3
[ 3498.124] (II) RADEON(0): Digital Display Input
[ 3498.124] (II) RADEON(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 3498.124] (II) RADEON(0): Gamma: 2.20
[ 3498.124] (II) RADEON(0): No DPMS capabilities specified
[ 3498.124] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3498.124] (II) RADEON(0): First detailed timing is preferred mode
[ 3498.124] (II) RADEON(0): redX: 0.592 redY: 0.344 greenX: 0.319 greenY: 0.553
[ 3498.124] (II) RADEON(0): blueX: 0.159 blueY: 0.144 whiteX: 0.312 whiteY: 0.328
[ 3498.124] (II) RADEON(0): Manufacturer's mask: 0
[ 3498.124] (II) RADEON(0): Supported detailed timing:
[ 3498.124] (II) RADEON(0): clock: 96.2 MHz Image Size: 367 x 2300000 mm
[ 3498.124] (II) RADEON(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1760 h_border: 0
[ 3498.124] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 912 v_border: 0
[ 3498.124] (II) RADEON(0): WR539171WX2
[ 3498.124] (II) RADEON(0): &5@Im
[ 3498.124] (II) RADEON(0): EDID (in hex):
[ 3498.124] (II) RADEON(0): 00ffffffffffff00320c000000000000
[ 3498.124] (II) RADEON(0): 000f0103802517780a8ef09758518d28
[ 3498.124] (II) RADEON(0): 24505400000001010101010101010101
[ 3498.124] (II) RADEON(0): 0101010101019525a04051840c304020
[ 3498.124] (II) RADEON(0): 13006fe6100000190000000000000000
[ 3498.124] (II) RADEON(0): 00000000000000000000000000fe0057
[ 3498.124] (II) RADEON(0): 52353339013137315758320a000000fe
[ 3498.124] (II) RADEON(0): 00263540496d9dc8ff02010a202000c3
[ 3498.124] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3498.124] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3498.158] Dac detection success
[ 3498.158] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[ 3498.158] Unhandled monitor type 0
[ 3498.192] Dac detection success
[ 3498.192] (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
[ 3498.253] (II) RADEON(0): EDID vendor "LPL", prod id 0
[ 3498.253] (II) RADEON(0): EDID quirk: Detailed timings give vertical size in cm.
[ 3498.253] (II) RADEON(0): Printing DDC gathered Modelines:
[ 3498.253] (II) RADEON(0): Modeline "1440x900"x0.0 96.21 1440 1504 1536 1760 900 901 904 912 -hsync -vsync (54.7 kHz)
[ 3498.253] (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
[ 3498.253] (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
[ 3498.253] (II) RADEON(0): Manufacturer: LPL Model: 0 Serial#: 0
[ 3498.253] (II) RADEON(0): Year: 2005 Week: 0
[ 3498.253] (II) RADEON(0): EDID Version: 1.3
[ 3498.253] (II) RADEON(0)

Ok, compilation successful with the above patch applied. I also rebooted to make sure everything will get loaded for scratch and applied export CLUTTER_VBLANK=none in /etc/environment. So far:
1) Fonts are looking just fine, no artifacts whatsoever in the panel or elsewhere I got so far.
2) Applications menu still crash.
3) GTK2 applications also crash. I opened up leafpad, it run, but failed to open a file and crashed the entired desktop. I have no oxygen-gtk installed on my system.
Generally speaking I like GNOME 3 quite much, not as much as GNOME 2, but crashing the whole desktop by just one application or just something less importand like the menu, its just a show stopper. I hope they will somehow fix these issues in the next releases.
Last edited by twilight0 (2011-12-05 23:16:04)

Uber-Noob Question about automounting USB hard drives

First, let me say I'm not just new to Arch, but new to Linux as well. Been playing with it off & on for years, but mostly 'off'. In the last 3 weeks I've installed 10-12 different distros between my 2 home PC's and VMware on my laptop. I've installed Arch probably 5 times now, and have got the process down pretty good. I've probably learned more about linux from installing and configuring Arch than any other distro, book, web site, etc. So now I've got it up and running again in VMware on an Ubuntu 7.10 install on my old pc. I've got gnome working, sound is fine, samba is fine, really no problems. Except mounting USB drives. I've read several posts here and the wiki, but nothing seems to be clear really.
I think it may be a problem in the VM environment, but I want to be sure. I'm planning to replace my Sidux install on my main PC with Arch later today or tomorrow. Assuming I get it installed, and get gnome installed, will the gnome volume manager work like it does in other distros? I don't mind doing the config by hand, but I do a lot with USB flash drives and USB hard drives, and it seems like it just doesn't work very well in Arch. I actually replaced my ubuntu install last week with Arch, but got tired of trying to access my music on my USB drive, never could get it to mount. So I just re-installed Ubuntu (shame on me, I know).
So any help in getting some understanding in what needs to be done would be greatly appreciated. (forgot to mention, I did follow the wiki steps for autofs, as well as the usb drive wiki stuff).
Thanks.

it's all working fine now, the problem was in the VM. I installed Arch on my main PC, and except for being an idiot, all went well. My USB drives automount in gnome, as does my CD. Haven't tried the ipods yet, but I'm sure there won't be a problem. Key for me: add my user to the storage group and reboot (logging off would of done the trick too I'm guessing). Had the same problem with setting up X, needed to reboot and all was well. Great distro, a helluva lot of fun to install and configure, and I've only done so little:)

[Solved] Mounting a ntfs usb drive in kdemod

I have an external usb drive that automounts in gnome, with write permissions. In kdemod it would not mount, and gave the error: "PermissionDeniedByPolicy mount-removable-extra-options no". I fixed this using this workaround... http://wiki.archlinux.org/index.php/HAL … utomounter. The drive now mounts, but i don't have write permission. Is there a way to get it to automount in kdemod? Would i have to change /etc/fstab for every external usb drive?
Last edited by benerivo (2009-03-22 10:49:32)

I'm not sure what i'm using to mount it. I have ntfs-3g installed and working for an internal drive. I'm hoping for a 'plug and wrirte' solution, as happens for me in gnome. Currently in kde, with the fix i mentioned, it mounts but only with read permissions. I'm hoping to avioid an /etc/fstab solution as i may need to use this computer in an environment where any ntfs usb external drive can be plugged in and written to.
Last edited by benerivo (2009-03-22 02:04:47)

DBUS error seems to prevent proper Gnome3.2 startup

Hi everyone,
I've been unable to start Gnome3.2 ever since it first came out. Here's my X error log:
X.Org X Server 1.10.4
Release Date: 2011-08-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0-ARCH x86_64
Current Operating System: Linux blackbriar 2.6.32-lts #1 SMP Tue Aug 30 08:59:44 CEST 2011 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=UUID=e09c380a-ed57-49b8-82ef-125ddd407ac4 ro quiet
Build Date: 17 September 2011 07:42:58AM
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 2 14:31:16 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
FATAL: Module fbcon not found.
xmodmap: commandline:1: bad add modifier name 'caps_lock', not allowed
xmodmap: 1 error encountered, aborting.
xset: unknown option +ft
usage: xset [-display host:dpy] option ...
To turn bell off:
-b b off b 0
To set bell volume, pitch and duration:
b [vol [pitch [dur]]] b on
To disable bug compatibility mode:
-bc
To enable bug compatibility mode:
bc
To turn keyclick off:
-c c off c 0
To set keyclick volume:
c [0-100] c on
To control Energy Star (DPMS) features:
-dpms Energy Star features off
+dpms Energy Star features on
dpms [standby [suspend [off]]]
force standby
force suspend
force off
force on
(also implicitly enables DPMS features)
a timeout value of zero disables the mode
To set the font path:
fp= path[,path...]
To restore the default font path:
fp default
To have the server reread font databases:
fp rehash
To remove elements from font path:
-fp path[,path...] fp- path[,path...]
To prepend or append elements to font path:
+fp path[,path...] fp+ path[,path...]
To set LED states off or on:
-led [1-32] led off
led [1-32] led on
-led named 'name' led off
led named 'name' led on
To set mouse acceleration and threshold:
m [acc_mult[/acc_div] [thr]] m default
To set pixel colors:
p pixel_value color_name
To turn auto-repeat off or on:
-r [keycode] r off
r [keycode] r on
r rate [delay [rate]]
For screen-saver control:
s [timeout [cycle]] s default s on
s blank s noblank s off
s expose s noexpose
s activate s reset
For status information: q
gnome-session[1704]: EggSMClient-WARNING: Desktop file '/home/bow/.config/autostart/dropbox.desktop' has malformed Icon key 'dropbox.png'(should not include extension)
** (gnome-settings-daemon:1719): WARNING **: /usr/lib/gnome-settings-daemon-3.0/libcolor.so: cannot open shared object file: No such file or directory
** (gnome-settings-daemon:1719): WARNING **: Cannot load plugin 'Color' since file '/usr/lib/gnome-settings-daemon-3.0/libcolor.so' cannot be read.
** (gnome-settings-daemon:1719): WARNING **: Error activating plugin 'Color'
GNOME_KEYRING_CONTROL=/tmp/keyring-r39ZPd
GNOME_KEYRING_PID=1726
GNOME_KEYRING_CONTROL=/tmp/keyring-r39ZPd
GNOME_KEYRING_CONTROL=/tmp/keyring-r39ZPd
SSH_AUTH_SOCK=/tmp/keyring-r39ZPd/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-r39ZPd
SSH_AUTH_SOCK=/tmp/keyring-r39ZPd/ssh
GPG_AGENT_INFO=/tmp/keyring-r39ZPd/gpg:0:1
WARNING: no socket to connect to
common-plugin-Message: checking whether we have a device for 4: yes
common-plugin-Message: checking whether we have a device for 5: yes
common-plugin-Message: checking whether we have a device for 12: no
common-plugin-Message: checking whether we have a device for 11: no
common-plugin-Message: checking whether we have a device for 10: no
common-plugin-Message: checking whether we have a device for 9: no
common-plugin-Message: checking whether we have a device for 8: no
common-plugin-Message: checking whether we have a device for 7: no
common-plugin-Message: checking whether we have a device for 6: no
gnome-session[1704]: WARNING: Application 'gnome-shell.desktop' failed to register before timeout
Failed to play sound: File or data not found
listen: bind to '0.0.0.0:6600' failed: Address already in use (continuing anyway, because binding to '[::]:6600' succeeded)
daemon: cannot init supplementary groups of user "bow": Operation not permitted
** Message: applet now removed from the notification area
(nm-applet:1959): libnotify-WARNING **: Failed to connect to proxy
(empathy:1957): libnotify-WARNING **: Failed to connect to proxy
Traceback (most recent call last):
File "/usr/lib/guake/guake.py", line 1353, in <module>
if not main():
File "/usr/lib/guake/guake.py", line 1296, in main
instance = Guake()
File "/usr/lib/guake/guake.py", line 649, in __init__
notification.show()
glib.GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Notifications was not provided by any .service files
(empathy:1957): folks-WARNING **: Error preparing Backend 'telepathy': Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[dix] couldn't enable device 10
JS LOG: GNOME Shell started at Sun Oct 02 2011 14:33:03 GMT+0200 (CEST)
** Message: applet now embedded in the notification area
(gnome-settings-daemon:1719): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
[1317558687,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application
xinit: connection to X server lost
waiting for X server to shut down
I have no idea what's wrong there. It looks like it's DBUS, but I'm not sure myself. I've waited a few days for new updates of Gnome3.2, but so far nothing's changed on my end.
If it helps, this is my pacman -Qm
aacgain-cvs 20101003-1
bug-buddy 2.32.0-1
chromium-stable-libpdf 14.0.835.186-1
culmus 0.120-1
dropbox 1.1.45-1
drush 4.5-1
easymp3gain-gtk2 0.5.0-4
evolution-webcal 2.32.0-1
fam 2.7.0-16
font-arhangai 20030401-3
jdk 7-3
jigdo 0.7.3-2
jre 7-3
mendeleydesktop 1.0.1-2
nautilus-dropbox 0.6.9-2
newlan 1.0.0.8-3
os-prober 1.49-3
otf-ipafont 003.03-1
packer 20110826-1
perl-gtk2-imageview 0.05-2
perl-proc-processtable 0.45-2
prey-tracker 0.5.3-1
pyroom-bzr 213-1
scrobby-git 20110905-1
tp_smapi 0.41-1
ttf-droid-sans 1.0-1
ttf-inconsolata-g 20090213-1
ttf-ms-fonts 2.0-8
ttf-sil-scheherazade 1.005-2
ttf-ubuntu-font-family 0.80-1
ttf-vista-fonts 1-3
vidalia 0.2.14-1
And I've also removed all custom extensions of Gnome3.2, all to no avail.
What should I do?

wonder:
Ah shoot, that's the previous error.log , I'm sorry. I've saved too many error logs now already, it's getting out of hand. This is the correct one:
X.Org X Server 1.11.1
Release Date: 2011-09-24
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0-ARCH x86_64
Current Operating System: Linux blackbriar 2.6.32-lts #1 SMP Tue Aug 30 08:59:44 CEST 2011 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=UUID=e09c380a-ed57-49b8-82ef-125ddd407ac4 ro quiet
Build Date: 10 October 2011 08:55:30AM
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 12 21:01:19 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) Failed to load module "vesa" (module does not exist, 0)
(EE) Failed to load module "fbdev" (module does not exist, 0)
FATAL: Module fbcon not found.
xmodmap: commandline:1: bad add modifier name 'caps_lock', not allowed
xmodmap: 1 error encountered, aborting.
xset: unknown option +ft
usage: xset [-display host:dpy] option ...
To turn bell off:
-b b off b 0
To set bell volume, pitch and duration:
b [vol [pitch [dur]]] b on
To disable bug compatibility mode:
-bc
To enable bug compatibility mode:
bc
To turn keyclick off:
-c c off c 0
To set keyclick volume:
c [0-100] c on
To control Energy Star (DPMS) features:
-dpms Energy Star features off
+dpms Energy Star features on
dpms [standby [suspend [off]]]
force standby
force suspend
force off
force on
(also implicitly enables DPMS features)
a timeout value of zero disables the mode
To set the font path:
fp= path[,path...]
To restore the default font path:
fp default
To have the server reread font databases:
fp rehash
To remove elements from font path:
-fp path[,path...] fp- path[,path...]
To prepend or append elements to font path:
+fp path[,path...] fp+ path[,path...]
To set LED states off or on:
-led [1-32] led off
led [1-32] led on
-led named 'name' led off
led named 'name' led on
To set mouse acceleration and threshold:
m [acc_mult[/acc_div] [thr]] m default
To set pixel colors:
p pixel_value color_name
To turn auto-repeat off or on:
-r [keycode] r off
r [keycode] r on
r rate [delay [rate]]
For screen-saver control:
s [timeout [cycle]] s default s on
s blank s noblank s off
s expose s noexpose
s activate s reset
For status information: q
gnome-session[2449]: WARNING: Session 'gnome' runnable check failed: Timed out
GNOME_KEYRING_CONTROL=/tmp/keyring-BVlgYc
GPG_AGENT_INFO=/tmp/keyring-BVlgYc/gpg:0:1
GNOME_KEYRING_PID=2468
GNOME_KEYRING_CONTROL=/tmp/keyring-BVlgYc
GPG_AGENT_INFO=/tmp/keyring-BVlgYc/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-BVlgYc
GPG_AGENT_INFO=/tmp/keyring-BVlgYc/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-BVlgYc
GPG_AGENT_INFO=/tmp/keyring-BVlgYc/gpg:0:1
SSH_AUTH_SOCK=/tmp/keyring-BVlgYc/ssh
WARNING: no socket to connect to
common-plugin-Message: checking whether we have a device for 4: yes
common-plugin-Message: checking whether we have a device for 5: yes
common-plugin-Message: checking whether we have a device for 12: no
common-plugin-Message: checking whether we have a device for 11: no
common-plugin-Message: checking whether we have a device for 10: no
common-plugin-Message: checking whether we have a device for 9: no
common-plugin-Message: checking whether we have a device for 8: no
common-plugin-Message: checking whether we have a device for 7: no
common-plugin-Message: checking whether we have a device for 6: no
Initializing tracker-miner-fs...
Initializing tracker-store...
Tracker-Message: Setting up monitor for changes to config file:'/home/bow/.config/tracker/tracker-miner-fs.cfg'
Starting log:
File:'/home/bow/.local/share/tracker/tracker-miner-fs.log'
Tracker-Message: Setting up monitor for changes to config file:'/home/bow/.config/tracker/tracker-store.cfg'
Tracker-Message: Setting up monitor for changes to config file:'/home/bow/.config/tracker/tracker-store.cfg'
Starting log:
File:'/home/bow/.local/share/tracker/tracker-store.log'
Failed to play sound: File or data not found
Failed to bind to '[::]:6600': Address already in use
** Message: applet now removed from the notification area
** (gnome-fallback-mount-helper:2545): DEBUG: Starting automounting manager
** (gnome-fallback-mount-helper:2545): DEBUG: ScreenSaver name vanished
** (gnome-fallback-mount-helper:2545): DEBUG: ScreenSaver name appeared
** (gnome-screensaver:2546): WARNING **: Config key not handled: disable-application-handlers
** (gnome-screensaver:2546): WARNING **: Config key not handled: disable-command-line
** (gnome-screensaver:2546): WARNING **: Config key not handled: disable-log-out
** (gnome-screensaver:2546): WARNING **: Config key not handled: disable-print-setup
** (gnome-screensaver:2546): WARNING **: Config key not handled: disable-printing
** (gnome-screensaver:2546): WARNING **: Config key not handled: disable-save-to-disk
** (gnome-fallback-mount-helper:2545): DEBUG: ScreenSaver proxy ready
** (gnome-fallback-mount-helper:2545): DEBUG: Screensaver GetActive() returned 0
** (gnome-fallback-mount-helper:2545): DEBUG: Found ConsoleKit session at path /org/freedesktop/ConsoleKit/Session4
** (gnome-fallback-mount-helper:2545): DEBUG: ConsoleKit session is active 0
** (notification-daemon:2517): DEBUG: Adding id 1
** Message: applet now embedded in the notification area
(empathy:2509): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -23 and height 32
(nm-applet:2512): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -8 and height 32
** (gnome-fallback-mount-helper:2545): DEBUG: ConsoleKit session is active 1
[dix] couldn't enable device 10
** (notification-daemon:2517): DEBUG: Bubble destroyed
** (notification-daemon:2517): DEBUG: No queued notifications
(tracker-miner-fs:2513): Tracker-WARNING **: Couldn't properly parse desktop file 'file:///usr/share/applications/brasero-nautilus.desktop': 'Desktop file doesn't contain type'
** (gnome-fallback-mount-helper:2545): DEBUG: ConsoleKit session is active 0
** (gnome-fallback-mount-helper:2545): DEBUG: ConsoleKit session is active 1
No backlights were found on your system
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-WARNING **: The maximum number of monitors to set (7692) has been reached, not adding any new ones
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: tracker_sparql_builder_prepend: assertion `raw != NULL' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_fd_list_get: assertion `G_IS_UNIX_FD_LIST (list)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_unix_input_stream_new: assertion `fd != -1' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_new: assertion `G_IS_INPUT_STREAM (base_stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_buffered_input_stream_set_buffer_size: assertion `G_IS_BUFFERED_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_set_byte_order: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-store:2515): GLib-GIO-CRITICAL **: g_data_input_stream_read_int32: assertion `G_IS_DATA_INPUT_STREAM (stream)' failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: (Sparql buffer) Error in array-update: Pipe creation failed
(tracker-miner-fs:2513): Tracker-CRITICAL **: Could not execute sparql: Pipe creation failed
GLib-GIO-ERROR **: Creating pipes for GWakeup: Too many open files
No backlights were found on your system
No backlights were found on your system
No backlights were found on your system
(exe:3323): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(chromium:3025): GdkPixbuf-CRITICAL **: gdk_pixbuf_new_from_data: assertion `width > 0' failed
[3025:3025:909905557:ERROR:browser_main.cc(1022)] Gdk: IA__gdk_cursor_new_from_pixbuf: assertion `GDK_IS_PIXBUF (pixbuf)' failed
[3025:3025:909905591:ERROR:browser_main.cc(1022)] GLib-GObject: g_object_unref: assertion `G_IS_OBJECT (object)' failed
No backlights were found on your system
No backlights were found on your system
(exe:3323): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
No backlights were found on your system
PolicyKit daemon disconnected from the bus.
We are no longer a registered authentication agent.
** Message: NM disappeared
** Message: applet now removed from the notification area
** Message: Got disconnected from the system message bus; retrying to reconnect every 10 seconds
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
(gnome-settings-daemon:3800): libupower-glib-WARNING **: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
(gedit:3277): GVFS-RemoteVolumeMonitor-WARNING **: Owner :1.36 of volume monitor org.gtk.Private.GduVolumeMonitor disconnected from the bus; removing drives/volumes/mounts
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
(gnome-panel:2500): GVFS-RemoteVolumeMonitor-WARNING **: Owner :1.36 of volume monitor org.gtk.Private.GduVolumeMonitor disconnected from the bus; removing drives/volumes/mounts
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
gnome-session[2449]: WARNING: Application 'gnome-settings-daemon.desktop' killed by signal
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
** (gnome-panel:2500): WARNING **: Error setting property: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name ":1.78" does not exist
** (notification-daemon:2517): DEBUG: Notification closed - removing from queue
** (notification-daemon:2517): DEBUG: Removing id 1
gnome-session[2449]: WARNING: Unable to determine session: Unable to find session for cookie
gnome-session[2449]: WARNING: Unable to determine session: Unable to find session for cookie
gnome-session[2449]: WARNING: Unable to determine session: Unable to find session for cookie
gnome-session[2449]: WARNING: Unable to determine session: Unable to find session for cookie
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
xinit: connection to X server lost
waiting for X server to shut down Check failed: g_shutdown_pipe_write_fd != -1
Received signal:1->'Hangup'g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Received signal:15->'Terminated'
OK
[3025:3025:1518677681:ERROR:browser_main_gtk.cc(75)] X IO Error detected
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Server terminated successfully (0). Closing log file.
I tried doing it again (startx), after that last fallback session, it didn't work. So now I'm back to the background-only view.
Here's my .xinitrc
xsetroot -cursor_name left_ptr
xmodmap -e "remove Lock = Caps_Lock"
xmodmap -e "keysym Caps_Lock = Escape"
xmodmap -e "add Caps_Lock = Escape"
xset +ft /usr/share/fonts/local
xset fp rehash
exec ck-launch-session gnome-session
toad: Here's my rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Amsterdam"
KEYMAP="us"
CONSOLEFONT="ter-116n"
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(vboxdrv vboxnetadp vboxnetflt tp_smapi)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="blackbriar"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
#WIRELESS_INTERFACE="wlan0"
#WIRED_INTERFACE="eth0"
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus acpid networkmanager netfs crond @httpd)

Pmount-hal error

HI all,
My usb keydrive is not automounting with gnome-volume-manager, Im getting the following error when running gnome-volume-manager from a shell:
lock_dir(): creat: No such file or directory
Error: could not lock the mount directory. Another pmount is probably running for this mount point.
I get this error running it as root or as user, so its not permissions...
There is definately no other pmount running (killall pmount?)
The /media/usbdisk directory exists (gnome-volume-manager/pmount-hal actually created the dir).
I can manually mount it from the shell as root (since no fstab entry is created now).
This is on a fresh install with gnome 2.12.2.
Any ideas?
EDIT: Nevermind, I redid the installation from scratch again and its working fine now...strange...
Edit: If I add it to fstab, i works fine as user. So there is clearly a pmount-hal issue going on here...can anyone confirm this behaviour??

lunke wrote:
I've just noticed I have the same problem.
EDIT: I've just found it's because pmount is trying to create the lock file in /var/lock. Just create the /var/lock dir and make it writeable for users.
mkdir /var/lock && chown root.users /var/lock && chmod g+w /var/lock
Someone file a bug report, I'm to lazy
This dir should come with the pmount pkg.
I had the same pmount problem and this advice saved me! I wonder how you figured it out. thanks!

Gnome 3.4 - automount broken [SOLVED]

Hello!
With Gnome 3.4 automount doesn't work anymore with my custom kernel. This worked before without any problem. It seem to me, that this caused by my kernel configuration and a change by udisks/udisks2.
$ groups
lp games network video audio storage power users networkmanager
$ pacman -Q packagename
udisks 1.0.4-3
udisks2 1.94.0-1
gvfs 1.12.2-1
gvfs-obexftp 1.12.2-1
gnome-disk-utility 3.4.1-1
$ palimpsest # this is gnome-disk-utility. Very easy to find! Really. Great naming from Gnome! Why you didn't call it, let me make a guess, "Epiphany"?)
(palimpsest:3804): GLib-GObject-WARNING **: invalid (NULL) pointer instance
(palimpsest:3804): GLib-GObject-CRITICAL **: g_signal_handlers_disconnect_matched: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
(palimpsest:3804): GLib-GObject-WARNING **: invalid (NULL) pointer instance
(palimpsest:3804): GLib-GObject-CRITICAL **: g_signal_handlers_disconnect_matched: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
(palimpsest:3804): GLib-GObject-WARNING **: invalid (NULL) pointer instance
(palimpsest:3804): GLib-GObject-CRITICAL **: g_signal_handlers_disconnect_matched: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
(palimpsest:3804): GLib-GObject-WARNING **: invalid (NULL) pointer instance
(palimpsest:3804): GLib-GObject-CRITICAL **: g_signal_handlers_disconnect_matched: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
(palimpsest:3804): GLib-GObject-WARNING **: invalid (NULL) pointer instance
(palimpsest:3804): GLib-GObject-CRITICAL **: g_signal_handlers_disconnect_matched: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
(palimpsest:3804): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(palimpsest:3804): Palimpsest-ERROR **: Error getting udisks client: Error calling StartServiceByName for org.freedesktop.UDisks2: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildSignaled: Process /usr/lib/dbus-1.0/dbus-daemon-launch-helper received signal 5
Trace/breakpoint trap
# pkaction
org.archlinux.pkexec.gparted
org.freedesktop.NetworkManager.enable-disable-network
org.freedesktop.NetworkManager.enable-disable-wifi
org.freedesktop.NetworkManager.enable-disable-wimax
org.freedesktop.NetworkManager.enable-disable-wwan
org.freedesktop.NetworkManager.network-control
org.freedesktop.NetworkManager.settings.modify.hostname
org.freedesktop.NetworkManager.settings.modify.own
org.freedesktop.NetworkManager.settings.modify.system
org.freedesktop.NetworkManager.sleep-wake
org.freedesktop.NetworkManager.wifi.share.open
org.freedesktop.NetworkManager.wifi.share.protected
org.freedesktop.RealtimeKit1.acquire-high-priority
org.freedesktop.RealtimeKit1.acquire-real-time
org.freedesktop.accounts.change-own-user-data
org.freedesktop.accounts.set-login-option
org.freedesktop.accounts.user-administration
org.freedesktop.color-manager.create-device
org.freedesktop.color-manager.create-profile
org.freedesktop.color-manager.delete-device
org.freedesktop.color-manager.delete-profile
org.freedesktop.color-manager.device-inhibit
org.freedesktop.color-manager.install-system-wide
org.freedesktop.color-manager.modify-device
org.freedesktop.color-manager.modify-profile
org.freedesktop.color-manager.sensor-lock
org.freedesktop.consolekit.system.restart
org.freedesktop.consolekit.system.restart-multiple-users
org.freedesktop.consolekit.system.stop
org.freedesktop.consolekit.system.stop-multiple-users
org.freedesktop.policykit.example.pkexec.run-frobnicate
org.freedesktop.policykit.exec
org.freedesktop.policykit.lockdown
org.freedesktop.udisks.cancel-job-others
org.freedesktop.udisks.change
org.freedesktop.udisks.change-system-internal
org.freedesktop.udisks.drive-ata-smart-refresh
org.freedesktop.udisks.drive-ata-smart-retrieve-historical-data
org.freedesktop.udisks.drive-ata-smart-selftest
org.freedesktop.udisks.drive-detach
org.freedesktop.udisks.drive-eject
org.freedesktop.udisks.drive-set-spindown
org.freedesktop.udisks.filesystem-check
org.freedesktop.udisks.filesystem-check-system-internal
org.freedesktop.udisks.filesystem-lsof
org.freedesktop.udisks.filesystem-lsof-system-internal
org.freedesktop.udisks.filesystem-mount
org.freedesktop.udisks.filesystem-mount-system-internal
org.freedesktop.udisks.filesystem-unmount-others
org.freedesktop.udisks.inhibit-polling
org.freedesktop.udisks.linux-lvm2
org.freedesktop.udisks.linux-md
org.freedesktop.udisks.luks-lock-others
org.freedesktop.udisks.luks-unlock
org.freedesktop.udisks2.ata-smart-selftest
org.freedesktop.udisks2.ata-smart-update
org.freedesktop.udisks2.encrypted-change-passphrase
org.freedesktop.udisks2.encrypted-change-passphrase-system
org.freedesktop.udisks2.encrypted-lock-others
org.freedesktop.udisks2.encrypted-unlock
org.freedesktop.udisks2.encrypted-unlock-crypttab
org.freedesktop.udisks2.encrypted-unlock-system
org.freedesktop.udisks2.filesystem-fstab
org.freedesktop.udisks2.filesystem-mount
org.freedesktop.udisks2.filesystem-mount-system
org.freedesktop.udisks2.filesystem-unmount-others
org.freedesktop.udisks2.loop-delete-others
org.freedesktop.udisks2.loop-setup
org.freedesktop.udisks2.manage-swapspace
org.freedesktop.udisks2.modify-device
org.freedesktop.udisks2.modify-device-system
org.freedesktop.udisks2.modify-system-configuration
org.freedesktop.udisks2.open-device
org.freedesktop.udisks2.open-device-system
org.freedesktop.udisks2.read-system-configuration-secrets
org.freedesktop.upower.hibernate
org.freedesktop.upower.qos.cancel-request
org.freedesktop.upower.qos.request-latency
org.freedesktop.upower.qos.request-latency-persistent
org.freedesktop.upower.qos.set-minimum-latency
org.freedesktop.upower.suspend
org.gnome.controlcenter.datetime.configure
org.gnome.cpufreqselector
org.gnome.gconf.defaults.set-mandatory
org.gnome.gconf.defaults.set-system
org.gnome.settings-daemon.plugins.power.backlight-helper
org.gnome.settings-daemon.plugins.wacom.wacom-led-helper
org.opensuse.cupspkhelper.mechanism.all-edit
org.opensuse.cupspkhelper.mechanism.class-edit
org.opensuse.cupspkhelper.mechanism.devices-get
org.opensuse.cupspkhelper.mechanism.job-edit
org.opensuse.cupspkhelper.mechanism.job-not-owned-edit
org.opensuse.cupspkhelper.mechanism.printer-enable
org.opensuse.cupspkhelper.mechanism.printer-local-edit
org.opensuse.cupspkhelper.mechanism.printer-remote-edit
org.opensuse.cupspkhelper.mechanism.printer-set-default
org.opensuse.cupspkhelper.mechanism.printeraddremove
org.opensuse.cupspkhelper.mechanism.server-settings
$ck-list-sessions
Session3:
unix-user = '1000'
realname = 'Foo Bar'
seat = 'Seat1'
session-type = ''
active = FALSE
x11-display = ''
x11-display-device = ''
display-device = '/dev/tty4'
remote-host-name = ''
is-local = TRUE
on-since = '2012-04-29T09:03:12.867383Z'
login-session-id = '4'
idle-since-hint = '2012-04-29T09:03:44.206817Z'
Session5:
unix-user = '1000'
realname = 'Foo Bar'
seat = 'Seat1'
session-type = ''
active = TRUE
x11-display = ':0'
x11-display-device = '/dev/tty7'
display-device = '/dev/tty4'
remote-host-name = ''
is-local = TRUE
on-since = '2012-04-29T09:03:41.927141Z'
login-session-id = '6'
Session1:
unix-user = '1000'
realname = 'Foo Bar'
seat = 'Seat1'
session-type = ''
active = FALSE
x11-display = ''
x11-display-device = ''
display-device = '/dev/tty1'
remote-host-name = ''
is-local = TRUE
on-since = '2012-04-29T08:59:43.385287Z'
login-session-id = '1'
idle-since-hint = '2012-04-29T09:22:08.209526Z'
Session2:
unix-user = '1000'
realname = 'Foo Bar'
seat = 'Seat1'
session-type = ''
active = FALSE
x11-display = ''
x11-display-device = ''
display-device = '/dev/tty2'
remote-host-name = ''
is-local = TRUE
on-since = '2012-04-29T08:59:46.207878Z'
login-session-id = '2'
idle-since-hint = '2012-04-29T09:22:46.226954Z'
$ dmesg # after inserting a sd-card/thumbdrive
udisksd[834] trap int3 ip:7fbbaa4115a1 sp:7fff78a33470 error:0
$ dmesg # after failed launch of palimpsest
udisksd[1224] trap int3 ip:7f5b345a05a1 sp:7fffc04a1330 error:0
palimpsest[1221] trap int3 ip:7f62cdeee5a1 sp:7fffc5c3a780 error:0
.config # custom kernel
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.3.4 Kernel Configuration
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
# General setup
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
# IRQ subsystem
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# RCU Subsystem
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_KMEM=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# Kernel Performance Events And Counters
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
# GCOV-based kernel profiling
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_THROTTLING is not set
# Partition Types
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# IO Schedulers
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
# Processor type and features
CONFIG_ZONE_DMA=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
# Power management and ACPI options
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_SBS=y
# CONFIG_ACPI_HED is not set
CONFIG_ACPI_APEI=y
# CONFIG_ACPI_APEI_GHES is not set
# CONFIG_ACPI_APEI_PCIEAER is not set
# CONFIG_ACPI_APEI_MEMORY_FAILURE is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_SFI=y
# CPU Frequency scaling
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# x86 CPU frequency scaling drivers
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# shared options
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y
# Memory power savings
# CONFIG_I7300_IDLE is not set
# Bus options (PCI etc.)
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
# PC-card bridges
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
# Executable file formats / Emulations
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
# Networking options
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
# Core Netfilter Configuration
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_ACCT=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
CONFIG_IP_SET_LIST_SET=y
# CONFIG_IP_VS is not set
# IP: Netfilter Configuration
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# IPv6: Netfilter Configuration
# CONFIG_NF_DEFRAG_IPV6 is not set
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
# Queueing/Scheduling
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_INGRESS is not set
# Classification
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NETPRIO_CGROUP=y
CONFIG_BQL=y
CONFIG_HAVE_BPF_JIT=y
CONFIG_BPF_JIT=y
# Network testing
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
# Bluetooth device drivers
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# Device Drivers
# Generic Driver Options
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="radeon/REDWOOD_me.bin radeon/REDWOOD_pfp.bin radeon/REDWOOD_rlc.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
# CONFIG_DMA_SHARED_BUFFER is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
# Protocols
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# Misc devices
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set
# EEPROM support
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
# Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_I2C is not set
# Altera FPGA firmware download module
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# SCSI device support
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
# SCSI support type (disk, tape, CD-ROM)
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
# SCSI Transports
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
# Controllers with non-SFF native interface
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
# IEEE 1394 (FireWire) support
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
CONFIG_MII=y
# CONFIG_IFB is not set
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_ROUNDROBIN=y
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y
# CONFIG_MACVLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CAIF transport drivers
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_ATL1C=y
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_XIRCOM is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_TR is not set
# USB Network Adapters
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
CONFIG_ATH_COMMON=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K=y
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_RATE_CONTROL=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL1251 is not set
# CONFIG_WL12XX_MENU is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# Input device support
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
CONFIG_INPUT_SPARSEKMAP=y
# Userland interfaces
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# Input Device Drivers
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# Hardware I/O ports
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
# Character devices
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
# Serial drivers
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# Non-8250 serial port support
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# PCMCIA character devices
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
# I2C Hardware Bus support
# PC SMBus host controller drivers
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# ACPI drivers
# CONFIG_I2C_SCMI is not set
# I2C system bus drivers (mostly embedded / system-on-chip)
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
# CONFIG_I2C_EG20T is not set
# External I2C/SMBus adapter drivers
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
# Other I2C/SMBus bus drivers
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# PPS support
# CONFIG_PPS is not set
# PPS generators support
# PTP clock support
# Enable Device Drivers -> PPS to see the PTP clock options.
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# Native drivers
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=y
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set
# ACPI drivers
CONFIG_SENSORS_ACPI_POWER=y
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# Sonics Silicon Backplane
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# Broadcom specific AMBA
# CONFIG_BCMA is not set
# Multifunction device drivers
CONFIG_MFD_CORE=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_S5M_CORE is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
CONFIG_LPC_SCH=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
# Multimedia core support
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m
# Multimedia drivers
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
# Encoders, decoders, sensors and other helper chips
# Audio decoders, processors and mixers
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
# CONFIG_VIDEO_TLV320AIC23B is not set
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
# RDS decoders
# CONFIG_VIDEO_SAA6588 is not set
# Video decoders
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_SAA7110 is not set
CONFIG_VIDEO_SAA711X=m
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_VPX3220 is not set
# Video and audio decoders
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
# MPEG video encoders
CONFIG_VIDEO_CX2341X=m
# Video encoders
CONFIG_VIDEO_SAA7127=m
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_AK881X is not set
# Camera sensor devices
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_TCM825X is not set
# CONFIG_VIDEO_SR030PC30 is not set
# Flash devices
# Video improvement chips
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# Miscelaneous helper chips
# CONFIG_VIDEO_THS7303 is not set
CONFIG_VIDEO_M52790=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_V4L_PCI_DRIVERS is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
# Graphics support
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# Frame buffer hardware drivers
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# Console display driver support
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=10
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# USB Input Devices
CONFIG_USB_HID=y
CONFIG_HID_PID=y
# CONFIG_USB_HIDDEV is not set
# Special HID drivers
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
# Miscellaneous USB options
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set
# USB Host Controller Drivers
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_MV is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# USB Device Class drivers
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
# also be needed; see USB_STORAGE Help for more info
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=y
# CONFIG_USB_LIBUSUAL is not set
# USB Imaging devices
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# USB port drivers
# CONFIG_USB_SERIAL is not set
# USB Miscellaneous drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set
# OTG and related infrastructure
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# LED drivers
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_TRIGGERS=y
# LED Triggers
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# iptables trigger is under Netfilter config (LED target)
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
# RTC interfaces
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
# I2C RTC drivers
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_

Solved! But how
udisks/udisks2 requires CONFIG_SWAP to be enabled in the kernel!
I can't imagine why this kernel option is required by udisks now. Personally I can't see any obvious reason, there is no sense.
I will try to contact the developers. Because I can't imagine why SWAP is required.

USB automount no longer working with upgrade to Gnome 2.30/udisks

Has anyone else had a problem with automounting of flash drives since the upgrade to Gnome 2.30 and udisks?

I have this problem too. Devices are mounted properly in /media, but there is no icon in nautilus/on desktop. Also there is no icon in gnome-mount applet.

[SOLVED]Automount stops working in Gnome 3.2

hi,
This is my first post on the forum i hope someone will help.So as the title says removable disks aren't automounting anymore in my Arch Linux system.This might have been due to a recent upgrade but I'm not sure.
I can mount it easily using udisks or mount commands from the terminal and it also automounts when I tried using a udev rules configuration file from the Arch wiki.
but Automount is supposed to work by default in gnome.So i'd rather restore the original funtionality than solve the problem with a workaround.So please help me solve this issue.
Other possibly relevant information:-
DE: Gnome 3.2
Processor: AMD Phenom II B55 X4
Last edited by archnuke (2011-12-10 07:08:14)

Sorry, the output for dmesg is very large i can't make out if it's detecting.Here is the output for dmesg.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 (GCC) ) #1 SMP PREEMPT Tue Nov 29 08:55:45 CET 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/01d30d7c-9e7d-43ff-9325-70818fe08325 ro 5 quiet splash radeon.modeset=1 pcie_aspm=force
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A785T-M, BIOS 0805 11/25/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff90000 page 4k
[ 0.000000] kernel direct mapping tables up to cff90000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ cff8e000-cff90000
[ 0.000000] RAMDISK: 037b9000 - 04080000
[ 0.000000] ACPI: RSDP 00000000000fb4f0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff90100 00054 (v01 112509 XSDT1442 20091125 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 112509 FACP1442 20091125 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 00000000cff90450 0D714 (v01 A1423 A1423001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cffa8000 00040
[ 0.000000] ACPI: APIC 00000000cff90390 0007C (v01 112509 APIC1442 20091125 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 112509 OEMMCFG 20091125 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffa8040 00072 (v01 112509 OEMB1442 20091125 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff9f450 00038 (v01 112509 OEMHPET 20091125 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff9f490 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cff90
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048350
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831440 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
[ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000
[ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s80448 r8192 d21952 u262144
[ 0.000000] pcpu-alloc: s80448 r8192 d21952 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028889
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/01d30d7c-9e7d-43ff-9325-70818fe08325 ro 5 quiet splash radeon.modeset=1 pcie_aspm=force
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 29a000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 3974856k/4980736k available (4156k kernel code, 787336k absent, 218544k reserved, 5288k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3214.257 MHz processor.
[ 0.006669] Calibrating delay loop (skipped), value calculated using timer frequency.. 6431.36 BogoMIPS (lpj=10714190)
[ 0.006673] pid_max: default: 32768 minimum: 301
[ 0.006778] Security Framework initialized
[ 0.006782] AppArmor: AppArmor disabled by boot time parameter
[ 0.007049] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008067] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008550] Mount-cache hash table entries: 256
[ 0.008895] Initializing cgroup subsys cpuacct
[ 0.008922] Initializing cgroup subsys memory
[ 0.008938] Initializing cgroup subsys devices
[ 0.008939] Initializing cgroup subsys freezer
[ 0.008941] Initializing cgroup subsys net_cls
[ 0.008942] Initializing cgroup subsys blkio
[ 0.008984] tseg: 0000000000
[ 0.008994] CPU: Physical Processor ID: 0
[ 0.008995] CPU: Processor Core ID: 0
[ 0.008997] mce: CPU supports 6 MCE banks
[ 0.009527] ACPI: Core revision 20110623
[ 0.013341] ftrace: allocating 16313 entries in 64 pages
[ 0.017029] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050957] CPU0: AMD Phenom(tm) II X4 B55 Processor stepping 03
[ 0.053330] Performance Events: AMD PMU driver.
[ 0.053330] ... version: 0
[ 0.053330] ... bit width: 48
[ 0.053330] ... generic registers: 4
[ 0.053330] ... value mask: 0000ffffffffffff
[ 0.053330] ... max period: 00007fffffffffff
[ 0.053330] ... fixed-purpose events: 0
[ 0.053330] ... event mask: 000000000000000f
[ 0.070239] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.096683] Booting Node 0, Processors #1
[ 0.096686] smpboot cpu 1: start_ip = 99000
[ 0.193343] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.213355] #2
[ 0.213357] smpboot cpu 2: start_ip = 99000
[ 0.310001] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.330008] #3
[ 0.330010] smpboot cpu 3: start_ip = 99000
[ 0.426665] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.433322] Brought up 4 CPUs
[ 0.433324] Total of 4 processors activated (25724.78 BogoMIPS).
[ 0.435542] devtmpfs: initialized
[ 0.437117] PM: Registering ACPI NVS region at cffa8000 (163840 bytes)
[ 0.437243] print_constraints: dummy:
[ 0.437305] NET: Registered protocol family 16
[ 0.437367] node 0 link 0: io port [1000, ffffff]
[ 0.437369] TOM: 00000000d0000000 aka 3328M
[ 0.437370] Fam 10h mmconf [e0000000, efffffff]
[ 0.437372] node 0 link 0: mmio [a0000, bffff]
[ 0.437374] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.437376] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.437378] node 0 link 0: mmio [f0000000, ffefffff]
[ 0.437379] TOM2: 0000000130000000 aka 4864M
[ 0.437381] bus: [00, 07] on node 0 link 0
[ 0.437383] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.437384] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.437386] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.437387] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.437389] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
[ 0.437398] Extended Config Space enabled on 1 nodes
[ 0.437428] ACPI: bus type pci registered
[ 0.437540] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.437543] PCI: not using MMCONFIG
[ 0.437544] PCI: Using configuration type 1 for base access
[ 0.437545] PCI: Using configuration type 1 for extended access
[ 0.437801] bio: create slab <bio-0> at 0
[ 0.437801] ACPI: Added _OSI(Module Device)
[ 0.437801] ACPI: Added _OSI(Processor Device)
[ 0.437801] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.437801] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.437801] ACPI: EC: Look up EC in DSDT
[ 0.440517] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.473753] ACPI: Interpreter enabled
[ 0.473757] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.473773] ACPI: Using IOAPIC for interrupt routing
[ 0.473788] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.474793] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.494720] ACPI: No dock devices found.
[ 0.494722] HEST: Table not found.
[ 0.494724] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.494777] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.494886] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.494888] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.494890] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.494891] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.494893] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.494895] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.494915] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.495012] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[ 0.495072] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.495076] pci 0000:00:02.0: PME# disabled
[ 0.495111] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.495171] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.495174] pci 0000:00:0a.0: PME# disabled
[ 0.495211] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.495231] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.495241] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.495251] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.495262] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.495271] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.495280] pci 0000:00:11.0: reg 24: [mem 0xfe9ffc00-0xfe9fffff]
[ 0.495327] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.495340] pci 0000:00:12.0: reg 10: [mem 0xfe9fe000-0xfe9fefff]
[ 0.495407] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.495421] pci 0000:00:12.1: reg 10: [mem 0xfe9fd000-0xfe9fdfff]
[ 0.495491] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.495512] pci 0000:00:12.2: reg 10: [mem 0xfe9ff800-0xfe9ff8ff]
[ 0.495585] pci 0000:00:12.2: supports D1 D2
[ 0.495587] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.495590] pci 0000:00:12.2: PME# disabled
[ 0.495614] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.495628] pci 0000:00:13.0: reg 10: [mem 0xfe9fc000-0xfe9fcfff]
[ 0.495693] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.495708] pci 0000:00:13.1: reg 10: [mem 0xfe9fb000-0xfe9fbfff]
[ 0.495780] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.495800] pci 0000:00:13.2: reg 10: [mem 0xfe9ff400-0xfe9ff4ff]
[ 0.495872] pci 0000:00:13.2: supports D1 D2
[ 0.495873] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.495877] pci 0000:00:13.2: PME# disabled
[ 0.495904] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.495992] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.496009] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.496018] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.496027] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.496036] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.496045] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.496093] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.496114] pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.496174] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.496178] pci 0000:00:14.2: PME# disabled
[ 0.496192] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.496274] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.496315] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.496329] pci 0000:00:14.5: reg 10: [mem 0xfe9fa000-0xfe9fafff]
[ 0.496398] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.496409] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.496418] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.496428] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.496439] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.496517] pci 0000:01:00.0: [1002:68b8] type 0 class 0x000300
[ 0.496534] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.496547] pci 0000:01:00.0: reg 18: [mem 0xfeae0000-0xfeafffff 64bit]
[ 0.496556] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.496573] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.496595] pci 0000:01:00.0: supports D1 D2
[ 0.496622] pci 0000:01:00.1: [1002:aa58] type 0 class 0x000403
[ 0.496646] pci 0000:01:00.1: reg 10: [mem 0xfeabc000-0xfeabffff 64bit]
[ 0.496704] pci 0000:01:00.1: supports D1 D2
[ 0.503321] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.503328] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.503332] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.503337] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.503408] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.503427] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.503448] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.503461] pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.503470] pci 0000:02:00.0: reg 30: [mem 0xfebf0000-0xfebfffff pref]
[ 0.503502] pci 0000:02:00.0: supports D1 D2
[ 0.503503] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.503507] pci 0000:02:00.0: PME# disabled
[ 0.509988] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.509994] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.509997] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.510002] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.510082] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.510094] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.510095] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.510097] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.510099] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.510100] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.510102] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.510121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.510234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.510258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.510283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.510318] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.510321] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.510322] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.512723] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[ 0.512751] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.512776] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.512800] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.512823] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.512847] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.512870] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 0.512894] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.512938] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.512938] vgaarb: loaded
[ 0.512938] vgaarb: bridge control possible 0000:01:00.0
[ 0.512938] PCI: Using ACPI for IRQ routing
[ 0.521316] PCI: pci_cache_line_size set to 64 bytes
[ 0.521395] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.521397] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[ 0.521472] NetLabel: Initializing
[ 0.521473] NetLabel: domain hash size = 128
[ 0.521474] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.521483] NetLabel: unlabeled traffic allowed by default
[ 0.521496] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.521499] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.523320] Switching to clocksource hpet
[ 0.526404] Switched to NOHz mode on CPU #0
[ 0.526524] Switched to NOHz mode on CPU #1
[ 0.526533] Switched to NOHz mode on CPU #3
[ 0.526544] Switched to NOHz mode on CPU #2
[ 0.527044] pnp: PnP ACPI init
[ 0.527052] ACPI: bus type pnp registered
[ 0.527119] pnp 00:00: [bus 00-ff]
[ 0.527121] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.527122] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.527124] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.527125] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.527127] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.527128] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.527130] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.527155] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.527227] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.527229] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.527255] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.527279] pnp 00:02: [dma 4]
[ 0.527280] pnp 00:02: [io 0x0000-0x000f]
[ 0.527281] pnp 00:02: [io 0x0081-0x0083]
[ 0.527282] pnp 00:02: [io 0x0087]
[ 0.527284] pnp 00:02: [io 0x0089-0x008b]
[ 0.527285] pnp 00:02: [io 0x008f]
[ 0.527286] pnp 00:02: [io 0x00c0-0x00df]
[ 0.527301] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.527306] pnp 00:03: [io 0x0070-0x0071]
[ 0.527313] pnp 00:03: [irq 8]
[ 0.527329] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.527333] pnp 00:04: [io 0x0061]
[ 0.527348] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.527353] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.527357] pnp 00:05: [irq 13]
[ 0.527371] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.527821] pnp 00:06: [io 0x0378-0x037f]
[ 0.527825] pnp 00:06: [irq 7]
[ 0.527827] pnp 00:06: [dma 0 disabled]
[ 0.527988] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.528010] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.528026] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.528049] pnp 00:08: [io 0x0060]
[ 0.528050] pnp 00:08: [io 0x0064]
[ 0.528054] pnp 00:08: [irq 1]
[ 0.528075] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.528385] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.528389] pnp 00:09: [irq 4]
[ 0.528390] pnp 00:09: [dma 0 disabled]
[ 0.528445] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.528489] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.528491] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.528517] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.528519] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.528521] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.528600] pnp 00:0b: [io 0x0010-0x001f]
[ 0.528601] pnp 00:0b: [io 0x0022-0x003f]
[ 0.528603] pnp 00:0b: [io 0x0062-0x0063]
[ 0.528604] pnp 00:0b: [io 0x0065-0x006f]
[ 0.528605] pnp 00:0b: [io 0x0072-0x007f]
[ 0.528606] pnp 00:0b: [io 0x0080]
[ 0.528607] pnp 00:0b: [io 0x0084-0x0086]
[ 0.528609] pnp 00:0b: [io 0x0088]
[ 0.528610] pnp 00:0b: [io 0x008c-0x008e]
[ 0.528611] pnp 00:0b: [io 0x0090-0x009f]
[ 0.528612] pnp 00:0b: [io 0x00a2-0x00bf]
[ 0.528613] pnp 00:0b: [io 0x00b1]
[ 0.528615] pnp 00:0b: [io 0x00e0-0x00ef]
[ 0.528616] pnp 00:0b: [io 0x04d0-0x04d1]
[ 0.528618] pnp 00:0b: [io 0x040b]
[ 0.528619] pnp 00:0b: [io 0x04d6]
[ 0.528621] pnp 00:0b: [io 0x0c00-0x0c01]
[ 0.528622] pnp 00:0b: [io 0x0c14]
[ 0.528623] pnp 00:0b: [io 0x0c50-0x0c51]
[ 0.528624] pnp 00:0b: [io 0x0c52]
[ 0.528625] pnp 00:0b: [io 0x0c6c]
[ 0.528626] pnp 00:0b: [io 0x0c6f]
[ 0.528628] pnp 00:0b: [io 0x0cd0-0x0cd1]
[ 0.528629] pnp 00:0b: [io 0x0cd2-0x0cd3]
[ 0.528630] pnp 00:0b: [io 0x0cd4-0x0cd5]
[ 0.528631] pnp 00:0b: [io 0x0cd6-0x0cd7]
[ 0.528632] pnp 00:0b: [io 0x0cd8-0x0cdf]
[ 0.528634] pnp 00:0b: [io 0x0b00-0x0b3f]
[ 0.528635] pnp 00:0b: [io 0x0800-0x089f]
[ 0.528636] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.528638] pnp 00:0b: [io 0x0b00-0x0b0f]
[ 0.528639] pnp 00:0b: [io 0x0b20-0x0b3f]
[ 0.528640] pnp 00:0b: [io 0x0900-0x090f]
[ 0.528641] pnp 00:0b: [io 0x0910-0x091f]
[ 0.528643] pnp 00:0b: [io 0xfe00-0xfefe]
[ 0.528644] pnp 00:0b: [io 0x0060-0x005f disabled]
[ 0.528645] pnp 00:0b: [io 0x0064-0x0063 disabled]
[ 0.528647] pnp 00:0b: [mem 0xffb80000-0xffbfffff]
[ 0.528648] pnp 00:0b: [mem 0xfec10000-0xfec1001f]
[ 0.528650] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[ 0.528701] system 00:0b: [io 0x04d0-0x04d1] has been reserved
[ 0.528703] system 00:0b: [io 0x040b] has been reserved
[ 0.528705] system 00:0b: [io 0x04d6] has been reserved
[ 0.528706] system 00:0b: [io 0x0c00-0x0c01] has been reserved
[ 0.528708] system 00:0b: [io 0x0c14] has been reserved
[ 0.528710] system 00:0b: [io 0x0c50-0x0c51] has been reserved
[ 0.528713] system 00:0b: [io 0x0c52] has been reserved
[ 0.528715] system 00:0b: [io 0x0c6c] has been reserved
[ 0.528716] system 00:0b: [io 0x0c6f] has been reserved
[ 0.528718] system 00:0b: [io 0x0cd0-0x0cd1] has been reserved
[ 0.528720] system 00:0b: [io 0x0cd2-0x0cd3] has been reserved
[ 0.528721] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved
[ 0.528723] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved
[ 0.528725] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved
[ 0.528727] system 00:0b: [io 0x0b00-0x0b3f] has been reserved
[ 0.528728] system 00:0b: [io 0x0800-0x089f] has been reserved
[ 0.528730] system 00:0b: [io 0x0b00-0x0b0f] has been reserved
[ 0.528732] system 00:0b: [io 0x0b20-0x0b3f] has been reserved
[ 0.528734] system 00:0b: [io 0x0900-0x090f] has been reserved
[ 0.528735] system 00:0b: [io 0x0910-0x091f] has been reserved
[ 0.528737] system 00:0b: [io 0xfe00-0xfefe] has been reserved
[ 0.528739] system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.528741] system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.528743] system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.528745] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.528832] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
[ 0.528834] pnp 00:0c: [io 0x0230-0x023f]
[ 0.528835] pnp 00:0c: [io 0x0290-0x029f]
[ 0.528836] pnp 00:0c: [io 0x0300-0x030f]
[ 0.528838] pnp 00:0c: [io 0x0a30-0x0a3f]
[ 0.528864] system 00:0c: [io 0x0230-0x023f] has been reserved
[ 0.528866] system 00:0c: [io 0x0290-0x029f] has been reserved
[ 0.528868] system 00:0c: [io 0x0300-0x030f] has been reserved
[ 0.528870] system 00:0c: [io 0x0a30-0x0a3f] has been reserved
[ 0.528872] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.528891] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.528918] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.528921] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.528985] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.528986] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.528988] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.528989] pnp 00:0e: [mem 0x00100000-0xcfffffff]
[ 0.528990] pnp 00:0e: [mem 0xfec00000-0xffffffff]
[ 0.529020] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.529022] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.529024] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.529025] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.529027] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.529029] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.529099] pnp: PnP ACPI: found 15 devices
[ 0.529100] ACPI: ACPI bus type pnp unregistered
[ 0.535725] PCI: max bus depth: 1 pci_try_num: 2
[ 0.535746] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.535748] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.535753] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.535756] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.535762] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.535764] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.535768] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.535771] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.535776] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.535794] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.535798] pci 0000:00:02.0: setting latency timer to 64
[ 0.535802] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.535806] pci 0000:00:0a.0: setting latency timer to 64
[ 0.535813] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.535815] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.535817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.535818] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.535820] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.535822] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.535823] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.535825] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.535827] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.535828] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.535830] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.535832] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.535834] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.535835] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.535837] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.535838] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.535840] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.535842] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.535906] NET: Registered protocol family 2
[ 0.536043] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.536876] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.538775] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.539013] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.539015] TCP reno registered
[ 0.539022] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.539045] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.539200] NET: Registered protocol family 1
[ 1.280050] pci 0000:01:00.0: Boot video device
[ 1.280058] PCI: CLS 64 bytes, default 64
[ 1.280094] Unpacking initramfs...
[ 1.387754] Freeing initrd memory: 8988k freed
[ 1.390928] PCI-DMA: Disabling AGP.
[ 1.391005] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.391006] PCI-DMA: using GART IOMMU.
[ 1.391008] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.394158] audit: initializing netlink socket (disabled)
[ 1.394173] type=2000 audit(1323097817.393:1): initialized
[ 1.403176] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.421724] VFS: Disk quotas dquot_6.5.2
[ 1.421835] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.421965] msgmni has been set to 7909
[ 1.422175] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.422214] io scheduler noop registered
[ 1.422216] io scheduler deadline registered
[ 1.422245] io scheduler cfq registered (default)
[ 1.422358] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.422408] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.422531] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.422577] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 1.422756] ERST: Table is not found!
[ 1.422758] GHES: HEST is not enabled!
[ 1.422826] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.443607] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.654212] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.713534] Linux agpgart interface v0.103
[ 1.713573] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.713574] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.713700] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.713793] mousedev: PS/2 mouse device common for all mice
[ 1.713823] rtc_cmos 00:03: RTC can wake from S4
[ 1.713911] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.713935] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.713942] cpuidle: using governor ladder
[ 1.713943] cpuidle: using governor menu
[ 1.714107] TCP cubic registered
[ 1.714109] NET: Registered protocol family 17
[ 1.714114] Registering the dns_resolver key type
[ 1.714214] PM: Hibernation image not present or could not be loaded.
[ 1.714218] registered taskstats version 1
[ 1.723236] rtc_cmos 00:03: setting system clock to 2011-12-05 15:10:18 UTC (1323097818)
[ 1.723259] Initializing network drop monitor service
[ 1.724176] Freeing unused kernel memory: 712k freed
[ 1.724333] Write protecting the kernel read-only data: 8192k
[ 1.729104] Freeing unused kernel memory: 1968k freed
[ 1.731193] Freeing unused kernel memory: 704k freed
[ 1.737520] udevd[73]: starting version 175
[ 1.739468] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.741865] [drm] Initialized drm 1.1.0 20060810
[ 1.754685] [drm] radeon kernel modesetting enabled.
[ 1.754795] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.754802] radeon 0000:01:00.0: setting latency timer to 64
[ 1.754952] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x174B:0xE147).
[ 1.754985] [drm] register mmio base: 0xFEAE0000
[ 1.754986] [drm] register mmio size: 131072
[ 1.755572] ATOM BIOS: JUNIPER
[ 1.755595] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 1.755597] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 1.757744] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 1.757747] [drm] RAM width 128bits DDR
[ 1.757810] [TTM] Zone kernel: Available graphics memory: 2026590 kiB.
[ 1.757811] [TTM] Initializing pool allocator.
[ 1.757834] [drm] radeon: 1024M of VRAM memory ready
[ 1.757835] [drm] radeon: 512M of GTT memory ready.
[ 1.757851] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.757852] [drm] Driver supports precise vblank timestamp query.
[ 1.757894] radeon 0000:01:00.0: irq 42 for MSI/MSI-X
[ 1.757899] radeon 0000:01:00.0: radeon: using MSI.
[ 1.757934] [drm] radeon: irq initialized.
[ 1.757937] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.758548] [drm] Loading JUNIPER Microcode
[ 1.763103] radeon 0000:01:00.0: WB enabled
[ 1.779315] [drm] ring test succeeded in 1 usecs
[ 1.779388] [drm] radeon: ib pool ready.
[ 1.779437] [drm] ib test succeeded in 0 usecs
[ 1.779442] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 1.780210] [drm] Radeon Display Connectors
[ 1.780212] [drm] Connector 0:
[ 1.780213] [drm] DisplayPort
[ 1.780215] [drm] HPD4
[ 1.780216] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 1.780217] [drm] Encoders:
[ 1.780219] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.780220] [drm] Connector 1:
[ 1.780221] [drm] HDMI-A
[ 1.780222] [drm] HPD5
[ 1.780223] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 1.780224] [drm] Encoders:
[ 1.780225] [drm] DFP2: INTERNAL_UNIPHY2
[ 1.780226] [drm] Connector 2:
[ 1.780227] [drm] DVI-I
[ 1.780228] [drm] HPD1
[ 1.780229] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 1.780230] [drm] Encoders:
[ 1.780231] [drm] DFP3: INTERNAL_UNIPHY1
[ 1.780232] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 1.780233] [drm] Connector 3:
[ 1.780234] [drm] DVI-I
[ 1.780235] [drm] HPD6
[ 1.780236] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 1.780237] [drm] Encoders:
[ 1.780238] [drm] DFP4: INTERNAL_UNIPHY
[ 1.780239] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.180039] [drm] Radeon display connector DP-1: No monitor connected or invalid EDID
[ 2.190543] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID
[ 2.201046] [drm] Radeon display connector DVI-I-1: No monitor connected or invalid EDID
[ 2.257580] [drm] Radeon display connector DVI-I-2: Found valid EDID
[ 2.257613] [drm] Internal thermal controller with fan control
[ 2.257647] [drm] radeon: power management initialized
[ 2.344105] [drm] fb mappable at 0xD0141000
[ 2.344107] [drm] vram apper at 0xD0000000
[ 2.344108] [drm] size 5787648
[ 2.344109] [drm] fb depth is 24
[ 2.344110] [drm] pitch is 6400
[ 2.344177] fbcon: radeondrmfb (fb0) is primary device
[ 2.396701] Refined TSC clocksource calibration: 3214.320 MHz.
[ 2.396709] Switching to clocksource tsc
[ 2.554690] Console: switching to colour frame buffer device 200x56
[ 2.559206] fb0: radeondrmfb frame buffer device
[ 2.559207] drm: registered panic notifier
[ 2.559211] [drm] Initialized radeon 2.11.0 20080528 for 0000:01:00.0 on minor 0
[ 2.582671] SCSI subsystem initialized
[ 2.585647] libata version 3.00 loaded.
[ 2.587750] ahci 0000:00:11.0: version 3.0
[ 2.587769] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.587909] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.587912] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.589757] scsi0 : ahci
[ 2.589940] scsi1 : ahci
[ 2.590464] scsi2 : ahci
[ 2.590727] scsi3 : ahci
[ 2.590832] scsi4 : ahci
[ 2.590986] scsi5 : ahci
[ 2.591099] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 22
[ 2.591102] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 22
[ 2.591105] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
[ 2.591108] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 22
[ 2.591111] ata5: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff00 irq 22
[ 2.591114] ata6: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff80 irq 22
[ 2.597011] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.597032] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 2.597228] scsi6 : pata_atiixp
[ 2.597267] scsi7 : pata_atiixp
[ 2.597648] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.597650] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.910055] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.910094] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.910136] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.910171] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.076716] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.076747] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.077756] ata1.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 3.077759] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.078875] ata1.00: configured for UDMA/133
[ 3.079038] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[ 3.079712] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
[ 3.083526] ata3.00: configured for UDMA/100
[ 3.092143] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
[ 3.096960] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.097023] sd 0:0:0:0: [sda] Write Protect is off
[ 3.097026] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.097048] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.105987] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.105989] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.106110] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.177871] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > sda4
[ 3.178261] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.132228] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.261572] udevd[264]: starting version 175
[ 5.578902] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.578907] ACPI: Power Button [PWRB]
[ 5.578971] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.578974] ACPI: Power Button [PWRF]
[ 5.598758] wmi: Mapper loaded
[ 5.610821] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.610874] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 5.635427] IT8712 SuperIO detected.
[ 5.635879] parport_pc 00:06: reported by Plug and Play ACPI
[ 5.635941] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.643631] ppdev: user-space parallel port driver
[ 5.660141] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 5.663565] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.682367] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.682384] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.682424] r8169 0000:02:00.0: setting latency timer to 64
[ 5.682468] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 5.682612] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc900112bc000, e0:cb:4e:69:9a:e0, XID 083000c0 IRQ 43
[ 5.689576] MCE: In-kernel MCE decoding enabled.
[ 5.690648] EDAC MC: Ver: 2.1.0
[ 5.696236] AMD64 EDAC driver v3.4.0
[ 5.696288] EDAC amd64: DRAM ECC disabled.
[ 5.696294] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.696295] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 5.696296] (Note that use of the override may cause unknown side effects.)
[ 5.712735] usbcore: registered new interface driver usbfs
[ 5.712752] usbcore: registered new interface driver hub
[ 5.712787] usbcore: registered new device driver usb
[ 5.720887] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.720962] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.720990] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 5.721010] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 5.721019] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 5.721044] ehci_hcd 0000:00:12.2: debug port 1
[ 5.721066] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9ff800
[ 5.733372] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 5.733475] hub 1-0:1.0: USB hub found
[ 5.733478] hub 1-0:1.0: 6 ports detected
[ 5.733581] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.733606] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 5.733613] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 5.733621] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 5.733641] ehci_hcd 0000:00:13.2: debug port 1
[ 5.733663] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe9ff400
[ 5.743352] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 5.744096] hub 2-0:1.0: USB hub found
[ 5.744099] hub 2-0:1.0: 6 ports detected
[ 5.780236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.780293] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.780324] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 5.780334] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 5.780364] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe9fe000
[ 5.792039] ACPI: acpi_idle registered with cpuidle
[ 5.840851] hub 3-0:1.0: USB hub found
[ 5.840858] hub 3-0:1.0: 3 ports detected
[ 5.840961] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.840989] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 5.840997] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 5.841014] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe9fd000
[ 5.897473] hub 4-0:1.0: USB hub found
[ 5.897479] hub 4-0:1.0: 3 ports detected
[ 5.897573] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.897590] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 5.897596] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 5.897621] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9fc000
[ 5.957474] hub 5-0:1.0: USB hub found
[ 5.957480] hub 5-0:1.0: 3 ports detected
[ 5.957572] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.957594] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 5.957601] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 5.957618] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe9fb000
[ 6.014135] hub 6-0:1.0: USB hub found
[ 6.014142] hub 6-0:1.0: 3 ports detected
[ 6.014239] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.014255] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 6.014264] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 6.014278] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9fa000
[ 6.070800] hub 7-0:1.0: USB hub found
[ 6.070806] hub 7-0:1.0: 2 ports detected
[ 6.070954] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.109562] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.109631] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 6.109655] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 6.128899] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 6.130086] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input4
[ 6.300021] usb 3-2: new full speed USB device number 2 using ohci_hcd
[ 7.231893] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input5
[ 7.231987] generic-usb 0003:1532:0016.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:12.0-2/input0
[ 7.231999] usbcore: registered new interface driver usbhid
[ 7.232000] usbhid: USB HID core driver
[ 7.821027] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 7.933547] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 7.957596] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 8.070035] fuse init (API version 7.17)
[ 8.618879] Adding 999420k swap on /dev/sda8. Priority:-1 extents:1 across:999420k
[ 11.779568] r8169 0000:02:00.0: eth0: link down
[ 11.779580] r8169 0000:02:00.0: eth0: link down
[ 13.424925] r8169 0000:02:00.0: eth0: link up
[ 16.759323] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 17.403790] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 17.405121] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 97.442665] NET: Registered protocol family 10
[ 108.403346] eth0: no IPv6 routers present
[ 120.373357] usb 2-3: new high speed USB device number 2 using ehci_hcd
[ 120.860655] Initializing USB Mass Storage driver...
[ 120.860772] scsi8 : usb-storage 2-3:1.0
[ 120.860854] usbcore: registered new interface driver usb-storage
[ 120.860856] USB Mass Storage support registered.
[ 120.861438] usbcore: registered new interface driver uas
[ 121.861329] scsi 8:0:0:0: CD-ROM HSPA USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
[ 121.863683] sr1: scsi-1 drive
[ 121.863798] sr 8:0:0:0: Attached scsi CD-ROM sr1
[ 121.865937] scsi 8:0:0:1: Direct-Access HSPA MMC Storage 2.31 PQ: 0 ANSI: 2
[ 121.868590] scsi: killing requests for dead queue
[ 121.869581] scsi: killing requests for dead queue
[ 121.870441] scsi: killing requests for dead queue
[ 121.872200] scsi: killing requests for dead queue
[ 121.873085] scsi: killing requests for dead queue
[ 121.875445] scsi: killing requests for dead queue
[ 121.877942] sd 8:0:0:1: [sdb] Attached SCSI removable disk
[ 121.877958] scsi: killing requests for dead queue
[ 121.878573] scsi: killing requests for dead queue
[ 173.996497] scsi: killing requests for dead queue
[ 173.997078] scsi: killing requests for dead queue
[ 201.389415] usb 2-3: USB disconnect, device number 2
[ 209.636672] usb 2-3: new high speed USB device number 3 using ehci_hcd
[ 209.768649] scsi9 : usb-storage 2-3:1.4
[ 210.135618] usbcore: registered new interface driver usbserial
[ 210.135627] USB Serial support registered for generic
[ 210.135683] usbcore: registered new interface driver usbserial_generic
[ 210.135685] usbserial: USB Serial Driver core
[ 210.143609] USB Serial support registered for GSM modem (1-port)
[ 210.143653] option 2-3:1.0: GSM modem (1-port) converter detected
[ 210.143796] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 210.143809] option 2-3:1.1: GSM modem (1-port) converter detected
[ 210.143872] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB1
[ 210.143887] option 2-3:1.2: GSM modem (1-port) converter detected
[ 210.143931] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB2
[ 210.143943] option 2-3:1.3: GSM modem (1-port) converter detected
[ 210.144004] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB3
[ 210.144018] usbcore: registered new interface driver option
[ 210.144019] option: v0.7.2:USB Driver for GSM modems
[ 210.768077] scsi 9:0:0:0: Direct-Access HSPA MMC Storage 2.31 PQ: 0 ANSI: 2
[ 210.769072] scsi: killing requests for dead queue
[ 210.769112] scsi: killing requests for dead queue
[ 210.769154] scsi: killing requests for dead queue
[ 210.770063] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[ 210.770076] scsi: killing requests for dead queue
[ 210.771081] scsi: killing requests for dead queue
[ 210.771128] scsi: killing requests for dead queue
[ 210.772084] scsi: killing requests for dead queue
[ 210.783113] scsi: killing requests for dead queue
[ 226.938063] PPP generic driver version 2.4.2
[ 229.158273] PPP BSD Compression module registered
[ 229.174663] PPP Deflate Compression module registered
[ 1085.299921] usb 2-4: new high speed USB device number 4 using ehci_hcd
[ 1085.534735] scsi10 : usb-storage 2-4:1.0
[ 1086.568771] scsi 10:0:0:0: Direct-Access ST350041 8AS CC44 PQ: 0 ANSI: 0
[ 1086.569136] scsi: killing requests for dead queue
[ 1086.569139] scsi: killing requests for dead queue
[ 1086.569509] sd 10:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1086.569546] scsi: killing requests for dead queue
[ 1086.570248] sd 10:0:0:0: [sdc] Write Protect is off
[ 1086.570250] sd 10:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 1086.570259] scsi: killing requests for dead queue
[ 1086.571137] sd 10:0:0:0: [sdc] No Caching mode page present
[ 1086.571140] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 1086.571156] scsi: killing requests for dead queue
[ 1086.571207] scsi: killing requests for dead queue
[ 1086.571236] scsi: killing requests for dead queue
[ 1086.571508] scsi: killing requests for dead queue
[ 1086.571882] scsi: killing requests for dead queue
[ 1086.573375] sd 10:0:0:0: [sdc] No Caching mode page present
[ 1086.573378] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 1086.604255] sdc: sdc1 sdc2 sdc3 sdc4
[ 1086.607382] sd 10:0:0:0: [sdc] No Caching mode page present
[ 1086.607384] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 1086.607386] sd 10:0:0:0: [sdc] Attached SCSI disk
EDIT: yes,it is detecting.it's an external hard drive /dev/sdc
Last edited by archnuke (2011-12-05 10:08:39)

GNOME 3.4 changing remembered automount and display settings

Here's an interesting observation.
My setup is the following: notebook computer + external display.
2 user accounts A and B and I'm using GNOME 3.4 in fall-back mode.
I think it's important to know, account A was created before I bought external display and started using it as a main one. Account B was created when I already used external display.
So, I use only external display at 1920x1200 resolution:
xrandr
Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 8192 x 8192
VGA-0 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 60.0*+
1920x1080 60.0
1600x1200 60.0
1680x1050 60.0
1280x1024 60.0
1280x960 60.0
1024x768 60.0
800x600 60.3
640x480 60.0
720x400 70.1
LVDS connected (normal left inverted right x axis y axis)
1280x800 60.0 +
1280x720 59.9
1152x768 59.8
1024x768 59.9
800x600 59.9
848x480 59.7
720x480 59.7
640x480 59.4
I also have a bunch of external USB drives connected to this notebook computer and they get automounted with the help of udisks2 helper:
mount |grep udis
/dev/sdb1 on /run/media/A/9d244934-d9fa-4a8e-8dd7-5c595f5518cf type ext2 (rw,nosuid,nodev,relatime,uhelper=udisks2)
So, I boot my Arch Linux, external display is connected and notebook is configured (by clicking Fn+Display key to choose to output video signal to external display only), I see GDM. So far so good, only external display is used, choosing automatically correct native resolution of 1920x1200.
I enter user account password in GDM, GNOME starts loading.
What happens for user A is that:
- notebook's display gets lit up, showing video output in its native resolution of 1280x800
- external display duplicates the video output apparently in this 1280x800 resolution (because the image is kind of zoomed and unscaled, blurred: because it's not a native resolution)
- I have to click Fn+Display key to switch available modes and choose one when only external display is used. When it's done, native resolution of 1920x1200 is chosen for external display and all is good.
However, when I resume from sleep notebook when logged in as user A, even though the external display is used in native resolution, just as it's supposed to be, I can see that notebook's screen is glowing, but not showing any video output. I need then to turn off power for it pushing Fn+Sun (an icon depicting sun with one half filled, and the other empty signifying on/off modes) .
The USB disks. When GNOME is loaded for user A I can see in Places my drives, but I have to manually click them to get them mounted. When resuming from sleep, I have to do it again. They're automatically detected, but aren't mounted.
All of that shouldn't be normally happening. Why?
Because for user B none of that is true.
External display works as expected on GNOME's start, when resuming from sleep under user B notebook's screen never isn't glowing. USB disks are automounted when user session is loaded, or OS is resumed from sleep.
Obviously, I want the same for user A. But there aren't really any settings to tweak, at least none that I know of or could find myself.
It would seem that something like session settings are different for these two user accounts, but I know really little about session management in GNOME. Might be something else.
I would appreciate it if you shared your insights or ideas as to how to make user A GNOME session to behave much like user B's in respect to displays and mounting of external USB drives.
Last edited by xCrucialDudex (2012-10-13 07:56:41)

I have the same problem as you. I can't access the system settings nor the online accounts thing. I guess we will have to wait till the next patch or something. Here is the bug report.

Automount in gnome

Similar Messages

Maybe you are looking for