Automount with iso9660 dvd problem

Hi all!
I have a problem with automount: I have two optical drives (an LG cdrw drive, detected and accessible from /dev/sr0, and a LG dvd+-rw, detected and accesible from /dev/sr1). I can mount and umount manually all kind of dvd/cd from each of them.
The problem is with automount: CDROM on sr0 and sr1 device are correctly automounted (on KDE I get the usual popup when I insert one cd into the drive). I have problem only with DVD, and only with ISO9660 DVDs on sr1: UDF DVDs are well detected and mounted (after mount I can query filesystem by "mount -i" command). Iso9660 are not recognized: no popup, no messages in dmesg, no automount. I can mount them by hand, successfully.
I tried to comment out lines in fstab regarding optical drives, with no results.
I'm pretty sure that, in the past, all worked perfectly.
Hal version is: 0.5.10-1
Dbus version is: 1.1.20-2
Udev version is: 119-1
Anyone can help?
uname -a:
Linux DarioDesktop 2.6.24-ARCH #1 SMP PREEMPT Sun Mar 30 11:40:06 CEST 2008 i686 Intel(R) Pentium(R) 4 CPU 3.40GHz GenuineIntel GNU/Linux
My fstab:
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd iso9660 ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd /mnt/fl vfat user,noauto 0 0
/dev/sda8 swap swap defaults 0 0
/dev/sda6 / reiserfs defaults 0 0
/dev/sda7 /home reiserfs defaults 0 0
DMESG output (part..):
ata2.00: ATAPI: HL-DT-ST GCE-8520B, 1.00, max UDMA/33
ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-H10A, JL02, max UDMA/33
ata2.00: configured for UDMA/33
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8520B 1.00 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-H10A JL02 PQ: 0 ANSI: 5
After/during manually mount a ISO9660 DVD on sr1 (in dmesg):
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
After/during automount a UDF DVD on sr1 (in dmesg):
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume '080116_1524', timestamp 2008/01/16 16:24 (1078)
After/during automount a CDROM on sr1 (in dmesg):
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root

Another thing, I dont use my orginal boot DVD, i bought another from apple store, i saw same texts in internet and it said it is impossible to install leopard without your original DVD witch cames with ur box mac

Similar Messages

Boot with Leopard DVD Problem

Hi, I have the new Macbook pro 2011 I7 2.2gz, but now it is slow, so i tryed to reinstall OS, but when i do this with dvd and when I press "C" to boot it, my Mac make 3 beeps, normaly it is because of RAM, but the strange point it is if I took out DVD of Leopard OS, the macbook starts normaly without 3beeps, it just happen when i try to boot with DVD.
I already make the Apple test, PRAM Reset, and everything it is OK, so i Dont undersand why i can not boot with dvd os leopard to reinstall Leopard :s
PS: Sorry for my inglish
Thanks in advantage.
Tiago Correia

Another thing, I dont use my orginal boot DVD, i bought another from apple store, i saw same texts in internet and it said it is impossible to install leopard without your original DVD witch cames with ur box mac

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

MOVED: Problem with SATA DVD/RW

This topic has been moved to AMD64 nVidia Based board.
Problem with SATA DVD/RW

I use the Plextor PX-712SA's with no issues. However...I do not believe the SATA versions require jumpers. Try plugging them in on SATA port 1 or 2, making sure those are enabled in BIOS of course. Make sure all connections are secure. There have been some issues with these particular drives not operating properly, but it has not been an issue with seasoned system builders, so the problems may be with the builder himself. Usually, Plextors are so good, they'll almost burn a paper plate! Try a different medium, maybe another brand of blank CD or DVD.
You may also want to check Device Manager in Windows, to see if it is listed "This device is working properly"!

Inspire 5.1 5200 connectivity problem with lg dvd 5.1

:mansad:Hii All
Please help me out with one connectivity problem. Recently I purchased Creative Inspire 5.1 5200 speaker system with one LG DVD 5.
From the speaker sub woofer system three output comes out which are EP. Now the LG DVD have six input in the form as mentioned below: <- Centre Box // 2- Sub Woofer Box // 3- Front Left // 4- Front Right // 5- Rear Left // 6-Rear Right.
Now I have tried by fixing the EP to EP-RCA(2) converter and plugged in to all the six DVD input. But all in vain since sound from two speakers could be heard. Right now I have fixed all the three EP to/-> 2- Sub Woofer Box// 4- Front Right // 6-Rear Right. But the performance in audio level is not at all satisfactory.
Please help me out with proper connectivity.
Regards
ANINDYA
[email protected]

I bought this Inspire 5200 some six months back. I use it with DVD player and have used it with three different DVD players, but the problems I face while playing DVD is that I mostly receive sound in front speakers, center speaker and the sub-woofer only. I say mostly as at times I get sound in one of the rear speaker as well, but that is very rare. My right rear speaker is completely dead, I have not heard any sound out of that lately. I have connected the speakers properly and checked by chaging cables as well, but of no use. I tried changing the DVD players as well, and have set them correctly to output 5.1 channel sound, but of no use.
I feel I should take it to the service center. But then, I have heard a lot of complaints for the service center here in New Delhi in India, specifically that they take very long to get the product repaired or replaced (at times more than 2-3 weeks) and make you visit several times before giving you the product back. Don't no what to do? Any sugestions?

Im having problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges in the video , does anyone have any idea ?

Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...

Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck.

Problem with copied DVDs--"DAMAGED TS FOLDER" (HELP or I shall go MAD!)

Hi folks--really, really hope someone can help me. This has got me beat. And I'm by no means sure it's a problem with my computer, but...
The facts:
1. I recently acquired a Panasonic DMR-ES20 DVD recorder, primarily to make DVD copies of a number of old and treasured videotapes. These are from broadcast, so copy protection isn't a factor.
2. I often use my Mac as a TV to watch DVDs and have never had the slightest problem with commercial DVDs.
3. I am (or was) using Roxio's Popcorn 2 program to make up backup copies of the DVDs I make.
4. I made about 20 DVDs without problem, and ALL work perfectly on the Imac, and ALL can be copied via Popcorn 2.
5. Then, SOMETHING CHANGED, I have no idea what--but now, each and every DVD I make with the Panasonic shows up on the Imac as follows:
"The TS folder appears to be damaged."
These disks will NOT play on the Imac and cannot be copied with Popcorn 2. They DO play on the Panasonic machine, however.
6. I have tried varying media, including high-quality Taiyo Yuden disks. That didn't help.
7. I have reset the recorder to original factory settings. That didn't help.
8. I have used a disk lens cleaner on the Imac. That didn't help.
9. I have spoken with Applecare and (God help me) Panasonic. Both pronounced themselves baffled.
10. As am I. As things stand, I've got a lot of more or less useless equipment. Ideas? Hints? Suggestions?
2 GZ PowerPC G5 Mac OS X (10.4.7)
2 GZ PowerPC G5 Mac OS X (10.4.7)
2 GZ PowerPC G5 Mac OS X (10.4.7)

The only time I have ever expierianced an issue like this is from doing extensive burning. The cause is from the storage of the cache files and some of the older TS folders even after you trashed them from your machine after you burned.
The only way I have been able to work around this is
First Repair Permissions as is submitted by Gulliver.
http://discussions.apple.com/thread.jspa?messageID=607640&#607640
I have also found that by running 3 freeware or shareware programs one right after the other and after the 3rd it will restart your computer all is well when I do it.
First run Macjanitor.
http://personalpages.tds.net/~brian_hill/downloads.html
Next run Cache Out X.
http://www.versiontracker.com/dyn/moreinfo/macosx/14850
And last but not least is ONYX.
take note when you run Cache out X and Onyx be careful to not delete your favorites in your browsers.
http://www.versiontracker.com/dyn/moreinfo/macosx/20070
A note of interest, I have had to do this after I have done a lot of copying to get rid of all the excesive junk that is left behind.
Give it a try.
Good Luck Don

Problems with burned DVD in iDVD - Works in some players, not in others

Hi, I'm having a strange problem with a DVD I burned in iDVD.
I have a disc image that I made in iDVD and then burn the Audio_TS and Video_TS folders to a DVD.
I burned to a Memorex DVD+R.
The video pops up fine and plays on my computer after it burns, but if I eject the disc and try to re-insert it, the DVD preview says "Supported disc not found". It did this same thing when I tried it in my Macbook.
It works fine in my standard DVD player, but I also tried it on my Playstation 3 and it did not play.
A few things I am going to try is buring directly from iDVD instead of first making a disc image, and also using DVD-R, although I heard that DVD+R is generally a better format to use.
Someone also told me that DVD+R does not play on macs, which I question.
If anyone has any other suggestions or might know why this is happening, I would greatly appreciate it. It is an important project that needs to be done soon! Thanks.
Message was edited by: Nathan Edwards1

The disc image option is within iDVD: File > Save as Disc Image. If you switch to DVD map map mode you can drag your movie to a spot prior to the menu so that the movie plays automatically when put into the player. Under advanced, you can set the movie to loop.... otherwise I think it goes back to the menu when done playing. BTW, all DVDs MUST have a menu it is part of the DVD specification. It is just a matter of whether you see the menu. As far as exporting your project back to tape... you won't loose any quality and your audio, along with your video and any editing to each will export back to tape. However, a MP3 is not generally considered a higher quality file (although perhaps the recorder was closer to the source?). As a matter of fact, if you are editing your audio I strongly suggest using a file sampled at at least 16-bit/48Khz, AIFF (or WAV or anything lossless).
In regards to the slow burn speed: I agree that a slower burn speed is better than the fastest burn speed (due to error corrections ect). However, I would choose a middle of the road burn speed. If my choices are 4x, 6x, or 8x, I would choose 6x. If it is 2x, 4x, 6x, I would choose 4x. And yes, quality of blank media can effect the playback of a disc that played once just fine.
Mike

DVD problems with TV-Out

I am trying to use my DVD player and I keep getting the error that it cannot play the DVD while the TV-Out option is enabled because of copyright issues. Is there a way I can disable that so the DVD's will play?? I have an FX 5200 with AMD 2700 processor. Thanks!!!

Hey DutchDeath-
I never did figure out the problem I was having with Power DVD (the software that came with my DVD player), but on one of the DVD's I was trying to play, it had some different software that automatically downloaded when I played it. Now mine seems to be working fine. So, I would try downloading a different software program and see if that helps get rid of the problem!
Hope that helps!

Problem with Burning DVD/Audio

iMovie HD version 5.0.2. I have been editing movies and burning DVDs for more than a year and have not encountered this problem before. When I play my latest movie, there doesn't seem to be a problem with the music that I imported in only one of the audio tracks. However, when I try to burn a DVD, the video encoding proceeds as usual but the audio encoding stalls when it appears to be about 90% complete. I have produced movies that are 2 hours long and have not run into this problem. The current movie is a little over 1 hour long, so I don't think the length is a problem.
Background info: As in the past, the source of the movie I am editing is a DVD that Walmart converted from old video films. I CINEMATIZED the DVD which I have done in the past to be able to edit the movie. When I copied the WALMART version of the movie, I only imported/copied the video portion and NOT the audio.
I hope this explanation of my problem is detailed enough. I am not very technologically educated so I am limited in my ability to explain the details.

Hi
May be this applies.
*No audio on DVD disc.*
Most common origin:
1 Imported audio from iTunes:
• In iTunes copy out as an audio-CD .aiff
• Use this in Your movie project
2 Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
Before burning the DVD:
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If OK:
• Make Your DVD - or -
• Burn from DiskImage with Apple Disk Util tool - and at an as slow speed as possibly eg x1
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Problem with burning DVD's

I have Roxio Toast Titanium and I have a problem with burning DVD's. When I put a blank DVD-R in my superdrive, select the files and go to burn; the advanced recording options will not let me deselect the check in "close disk". It is shaded. But when I use a CD-RW I can and so far the Roxio help has...well has not been help at all. I mean why would I spend the money to buy a software package that lets me do the same thing as the basic OS-X disk utility would let me do? Drag a file, burn it and close the disk from any future use....
Sorry if this does not belong here, I did not see a area for general software questions way back in the main forum area not one here.
Rob

Donald,
Hi and thank you.
To give you more details on what I am trying to do; I am trying to burn in Mac & PC format. I am mainly trying to back up all my assorted college files (I am a college student), these files are lecture notes in Word with embedded audio recordings, standard Word documents such as essays, etc., spreadsheets, PDF documents, etc. The files I am attempting to burn should not be larger than 4.7 gb and Roxio has not given me a warning that it would be.
I am just frustrated that when I put in a DVD-R or -RW I only have one option, and that is to close out the disk when it is finished burning it. I have also gone to the recording tab, on the menue bar, to uncheck the "close disk" box after I put in a blank DVD and before I select files to burn. The option is shadded preventing me from even trying, which is not the case for a CD!
Thank you!
12 PowerBook G4 Mac OS X (10.4.1)

HT201066 I have problem with recently with playing DVDs on my iMac. the problem only with DVDs, please anybody can help me solve this problem?

I have problem with recently with playing DVDs on my iMac. the problem only with DVDs, please anybody can help me solve this problem?

Get a lens cleaner disc. One with brushes and try that. CDs and DVDs use different lenses, so since CDs load and play, I strongly suspect a dirty lens.

Satelite 1400-503 problem with a DVD+R

Hello,
I have a problem with my dvd - rom. Family of me have burned a dvd+R. Now can't i play it on my notebook. So i tested a dvd-R and this works well.
A friend of me tells me that i can change some configuration of something like that so i can play the both formats. Can someone help me with this???

Hi
I don't think this is a setting to be changed. The drive must support the + format.
This is not very common if the machine is not very very new. If You get this problem with the built-in drive of Your Sat1400-503 and it is not replaced by some unsupported one, then I am very sure that it does not support the DVD+R format.
BR
Tom

Problems with my DVD/CD-ROM Drive (MS-8216)

I have a BIGGGG problem with my DVD/CD-ROM Drive (MS-8216)
I was copying somethin in my comp, and the cd got BOOOM into pieces inside.
My warranty expired 1 month ago, so i clean it in the inside. After this it is like this :
- i can watch 700mb movies AVI format with no problems, but when i want to copy anything in my comp from the cd it always stops rotating at 6% of copiyng and BANG it stops and an error has acourde. Same with the dvd's. Please don't ask me about my comp config couse i know it has no problem with that. I left every thing like it was inside --- impecable, no wiress unplugged and i've upgraded the firmware also
What can it be. Thank you

if you can read the CD, but not copy from it, try this program:
Isobuster
It allows you to read with a much better accuracy than the generic windows driver.
However, i'm afraid your drive has been damaged in the explosion and this is only a work around, not a real solution.
The good point is that DVD burner are now cheap, but it is not much...

Booting with DVD problem!!! Disk needs repair

Hello,
Ran disk utility and I got the «disk needs repair» error. Please boot from install DVD
Okay no panic I try to do it.
First try holding C key and with the snow leopard DVD (retail not the one I got with the computer) = failure keeps me on the apple window
Tried it with the DVD I got with the macbook pro while holding the C key again = faileure keeps me on the apple window
The computer works fine except it tends to bog down
I'm running lion and my macbook pro is less than a year old
I also have Norton antivirus (because YES there are viruses again - anyway norton told me there were when I scanned my HD a while back -). I tried disabling it totally and tried the same things but to no avail...
Can anyone help? Have I overlooked something obvious? Or is somehting more complicated necessary?
Thanks in advance

If you've installed Lion, the 10.6 disk won't help you. You need to hold down Command-R during boot to bring up Lion recovery ... you can then run Disk Utility.
Oh, and agree with Allan, dump Norton. If you want an antivirus, install ClamXav from http://www.clamxav.com

Automount with iso9660 dvd problem

Similar Messages

Maybe you are looking for