Autonumber for Heading

I am currently setting up a RH8 project that should generate a CHM and a PDF from a single source. I do not want to do any post processing for the printed documentation so I am prepared to accept the drawbacks the default behavior might have.
So far I have not been able to get autonumbering on the headings in the PDF, and by headings I mean the items that appear in the PDF TOC. I have tried to activate autonumbering for the "Heading X" styles and have created a multilevel List Class and made the connections back and forth, but no luck.
Is it possible to get autonumbering for headings in the PDF without manual post processing?

Hi,
I think that some tweaking in your style mapping.dot may solve this. Open style mapping.dot and change al the heading styles, so they have numbering.
Greet,
Willam
This e-mail is personal. For our full disclaimer, please visit www.centric.eu/disclaimer.

Similar Messages

  • How do I set the conversion settings for Word to ignore outline autonumbering for headings?

    I have a user manual in Word that uses outline autonumbering for Heading 1, Heading 2, etc. For example, "1.0 Introduction," "1.1 System Settings" and so on).
    I know when setting the conversion settings for FrameMaker, you can select the Ignore Autonumber option in the Conversion Settings dialog to keep only the paragraph content. I don't see anything like this for the Word Conversion Settings. Does this capability exist?

    To clarify:
    I have my paragraphs in Word set up with the required numbering properties using Word's Style settings. In Word, I want the headings to be numbered 1.0, 1.1, 1.1.1, etc. because the intent is for the reader to read through the manual like a book - from start to finish.
    I'm single-sourcing my manual from Word into RoboHelp to generate an online help package. However, I do not want my RoboHelp headings to be numbered because the user may or may not read each topic in order (in other words, they may only need to read what's in section 3.2, but won't get there by reading sections 1.0 through 3.1 first). I might also clarify that each heading is its own topic - so Section 3.2 would be a separate topic from 3.0 and 3.1.
    So for example, in Word, it reads like this:
         "1.0 Introduction
         [content goes here]
         1.1 System Requirements
         [content goes here]
         1.2 References
         [content goes here]"
    And in RoboHelp, I want it like this
         "Introduction
         [content goes here]"
         ---[end of topic]---
         "System Requirements
         [content goes here]"
         ---[end of topic]---
         "References
         [content goes here]"
         ---[end of topic]---
    Does that make sense?
    So how do I keep the numbering in my Word document, but set up the Conversion Settings in RoboHelp to ignore those numbers and only include the text following the autonumber? I have been able to do this when single-sourcing a FrameMaker book into RoboHelp.

  • Contract net value for Header Statistics is not correct

    There is issue with value contract. The net value for Header Statistics is not showing correctly for some contracts. Especially, when we delete the PO line items or reverse all entries (GR and IR) for PO line item.
    Contract has one line with account category ‘U’. The target value is 300,000.00 and total quantity released to date is 160,000. The net value for Header Statistics should be 140,000 but it is showing 600,000 which is over (double) the target value and user cannot release any further PO reference to this contract.
    Earlier I defined net price for line item 300,000 and I changed net price to zero and execute report RM06ENP0 but it doesn’t work.
    Please share your experience and thoughts.
    Thanks,
    Shah.

    Hi Jurgen,
    There are few Purchace orders with multiple line items and each line item for Purchase orders referencing the same line and same contract.
    There is only one Purchase order has two deleted lines against this contract.
    Theses deleted line's net price has changed to zero and there is no PO history.
    Contract released order value is correct as there is only one line, but net price is wrong. and user is getting error for target value is excedeed by $nnn when trying to create purchase order.
    Thanks,
    Shah.

  • EXIT_SAPMM06E_012 : Incoterms validation for header/item in a PO.

    Hi,
    I need to add validation to PO that :
    The header level incoterm 1 and 2 and the items incoterm1 and 2 has to be populated by the user, for PO create(ME21n) and change (ME22n)
    modes.
    THe header level inocterm field validations were done in Change mode(ME22n) using the i_ekko in EXIT_SAPMM06E_012.
    But i'm not able to do this, for the item level incorterms. I cant find which table holds the incoterm data for items.
    Also, please let me know how to do it when the PO is in create mode. Can EXIT_SAPMM06E_012 be used?
    and which internal table will have the inco terms for header and item data , when in create mode.
    Thanks in advance ,
    Shyam.

    Hi
    Try with BADI ME_PROCESS_PO_CUST method CHECK.
    Regards
    Eduardo

  • Wht is TEXT ID for Header Text in a Purc. Order?

    Hi Experts,
    Am looking to dispaly the header text of my_purchase order into a report, by using READ_TEXT.
    But. am unable to figure out the TEXT ID for this HEADER TEXT for my_PO.
    So,
    1 - Wht is TEXT ID for it? ok, after some reasearch , i came to know that, its F01.......so, how to know the F01 is for header text? i know how to know this for sales order!!
    2 - In which tables stiores all thsese info?
    replies appreciated.
    thanq
    Edited by: SAP ABAPer on Oct 14, 2008 9:27 PM

    Rob's Suggestion is the best way to find that out.
    One other way is to Double click on the Text area. This will open a text editor.
    Then Navigate to Goto->Header. This should give you the required Info.

  • Line item for header material not updating in COEP table

    Hi all,
    from last few days, I found that   when I do confirmation and GR for process order, system is updating all line ( i.e. components, activity types) but line for header material that is finished goods  or semi finished goods is not updating in COEP table,  I have done GR for order and transferred stock from quality too.
    But still its not updating. What could be the reason for it .
    Thanks
    Vivek Varun

    Hi Krishnendu,
    Thanks for the reply ,  FI document is not getting generated.
    What could be the reason for it, as before it was working fine.
    Thanks
    Vivek Varun

  • Automatic Pricing for Header condition

    Hello,
    We have the following scenario.
    For an specific Sales Order type we need to charge (surcharge or a fee) a fix $$ amount at the header level. This amount should be charged only if the total value of the order is less then a fixed $$ amount.
    Also another condition is for a specific material group we need to charge a fix $$ amount and if this condition is selected then the other condition should not be selected.
    Eg:
    1) for all material with Material group AB we want to charge(via condition type) 100$ at the header level.
    we want this automatically at the header.
    2) For all Order type OR we want to charge(I will maintain a condition type) 200$ if the net value of that sales order is less then 5000$. This is not item specific but at the Order header level.
    We dont want to manually enter the condition type (surcharge).
    I know that for Header conditions we cannot have access sequence and condition records. Then how can the 100$ or 200$ charge condition type come automatically in the Sales Order if the total order value is less then 5000$.
    I can have a requirement but what about the condition Record and the access sequence for the Order type or the material group?
    Any Ideas?
    Thanks
    SAP Fan

    hello, friend.
    i have an hypothesis (which is merely a guess because i have not tried this recently), that it is possible to do this, but you have make your condition type both header and item, which means you get to assign an access sequence (enabling condition records).  but you must also "tick" the "group condition" in the condition type so that even if this is entered at item level, this applies to the entire document and will be distributed to the items.
    the group condition is supposed to be used for manually entered header conditions such as pallet discounts, and i think i might have done this for material groups, but do not recall if i've done this for order type or any other variable at one point.  please do us a favor and test it, and post your findings.
    regards!!!
    Edited by: jonathan y on Jun 1, 2009 3:08 PM

  • File content conversion - sender adapter for Header and detail records

    Hi Experts,
                     I am receiving a field of fixed length content format.(Header)The first line of the file will follow the structure X having some fields and (DetailRecord)subsequent lines in the file will follow structure Y having somes fields.There is no record identifier for Header and Detail records.In one file first line is Header records and remaining subsequent line is DetailRecord.What are the parameters we have to set for sender file content conversion parameters as i donot have any key field and key field value.And in one file we have only one header records ( first line) and n number of detail records from 2nd line onwards.
    Thanks
    Deepak

    Hi
    Refer the below fourm link,
    Flat file whitout id
    Regards
    Ramg.

  • How to create schema for Header and Footer with pipe delimiter file BPEL11g

    Hi all,
    I have issule creating Schema for Header and Footer with body file .The file format is Pipe delimiter.The following format below like is...
    Softeware Components:File Adapter(Read) 11g,
    1|1211|000|577|5444
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|0000|57|6988|4554|sfdgh|5448|3333|ituu|44445|55546|544|788|7788
    1|4544|000|yted
    I hope get the sollution for this from this Forum..Please help me out..Thankyou.

    You mean how many rows or columns..?
    If coloumns means 5 and rows only one(1).

  • MRP run for header material with bom usage-3

    Dear All,
    We have header material with bom usage-3.We maintain the stock at child components only ,not at header
    I have created the planned independent requirement for header material.I have created a sales order but sales order is not shown in md04.
    What can be the further setting  I am missing for mrp run of above scenario.
    with regards,
    pradeep

    Dear ,
    Couple of checks points for you :
    1.Check the material master Sales Org Veie-Item Categoery .As you have mentioned Item Categoery -TAQ which is not relevent for requirement planning throgh schedule line category -CT ( CT means there will not be any inventory or good movement and requirement will not be passed for MRP ) .Only CP -line item categoery does requirement passing through MRP and it will show u in MD04. So the summery is if you want to generate an MTO order for the same FG material , you should matian the Sales Line item categoery as MTO in sales Org View and it will pop up in VA01 whiel logging Sales Order .
    Generally , TAQ item categoery are used in Project Billing or Delivery .ok  and they will not be having any availabilit check so it KP ( no check ) .
    But for MTO order , you should have availablty chek 02/01 in MRP3 view and also MTO Sales Item categoery .
    Based on the above information logg an sales order , release credit chek in VKM3, SAVE and check in MD04.
    Create PIR in MD61 and Run MRP on the both cases .I have tested its working .but noit with TAQ item categoery ok
    2.Why do you need to create Sales Order for dependent Item-Y because it will be in X-BOM item  ? Make sure that Y- should have Sales Item categoery in material master -MM02-Sales Org View as NORM item .If you really want to create sale sorder for this item , it should TAN or NORM .
    3.Other PIR detail is fine .
    Try and revert back
    Regards
    JH

  • Receiver FCC Structure For Header and Trailer

    Hi Guys ,
    I need to go for receiver FCC for header and trailer  in PI .How the FCC in communication channel needs to be configured if I am taking a separate node for header and trailer in mapping .Output of the file should be as the file attached.
    Thanks.
    Regards.

    Hi,
    If you are using File communication channel as a reciver you can go with FCC.
    Use record set structure as : Header,detail,trailer.
    https://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
    Otherwise if you are going for SFTP to create the file ... follow the Indrajit suggestion..
    Still facing any issue.. Please let us know..
    Thanks,
    Sreenivas...

  • Table For Header Text Old Value

    Hi,
    Could Anyone helpme in finding the table for Header text of the PO , as We know  to find the current PO Header Text,by usinf th FM READ_text but i want to to find the header text for the po before Updated , Thanks in advance
    Regards
    Priyanka M Jain

    Hi,
    I believe that you need the text just after entering in PO during the runtime.
    just enter the text and go in the debugg mode, check for table text / textline in the global parameters and you will find the text.
    Hope this helps,
    Raj

  • Warning for header po delivery cost but with only free of cost items

    Dear.
    Do you know If exist a chance to send a warning If I insert in a purchase order a header delivery cost condition type but the items of this po are only free of cost ?
    Thanks.

    Dear Chris,
    As per my knowledge this cannot be done in standard SAP because
    When we create PO line item with Free goods indicator set automatically item conditions tab correctly disappears
    But the header condition tab always will be there because " In a PO you may have 6 line item out of them 3 is free goods and 3 is not " That is the reason Header conditions tab is there.
    But you don't really have to worry because if you have only 1 item with Free goods indicator set and you enter a amount for header freight you will find the field condition value by default Blank and you cannot enter a value there , so no need to worry no postings will be made.
    Now say you have PO with 3 line items (out of which1 with Free goods indicator) and you enter a header freight 100 EUR
    You will find now that field condition value is not becoming blank and the amount 100 EUR is distributed among 2 non free Goods item proportionately.
    Hope it clarifies

  • Separate table title autonumbering for two named table styles?

    I believe this very same question whizzed by a few weeks ago but I'm having no luck searching for it.
    I have two named table styles.  I want the autonumbering for the table titles to be separate.  More specifically, one will autonumber as "Table t", while the other will autonumber as "Example e".
    I have redefined the autonumbering counter for the second of the two TableTitle para style, and if I apply that style while in that table's title, I get the new autonumbering.  But I can't transmit (a) selectively update the Table Title style to this format to other tables in the chapter.  By extension, I can't copy the  wonderful new table format to other chapters in the book.
    I next tried creating a new para style "ExampleTitle", then in the Table Designer trying Update All.  Nope, other tables of type example do not receive the new title style.
    This is fully-patched FM8.  The document is structured but I don't (want to) care about that -- I simply need to get the two different named table styles
    to autonumber sequentially.
    This is probably pretty easy once I learn the "trick"...(?)
    Cheers & thanks,
    Riley

    Arnis:
    Thanks.  For some reason I couldn't get my table to update, so I went through and manually create a second table title paragraph style, then manually applied that.  (I also created a second x-ref format so that I could x-ref to "Example n:" without including the colon in the x-ref, but that's another story...)
    So for now I've worked around the problem.  After I get this document out I'll revisit the issue.  (Why do I have a vague recollection that there's a known idiosyncracy where FM6+ table styles don't update properly...?)
    Cheers & thanks 'gain,
    Riley

  • Why we cant have access sequence for header condition ?

    hi ,
    i have one query in pricing.
    Can we assign access sequence for header condition ? if yes how ?
    if not why ? please explain

    Hi there,
    It is always possible to have work around to solve issue without refer to OSS to change any programming coding.
    We want to have a freight charge appear on each sales order automatically according to some condition. Most of the time, this freight charge is a flat rate (if it is depend on qty or value, then we're so easy to set it in item level).
    In order to do so, we'll have one assumption. The item line number of sales order is auto running number, like 10, 20 and etc created by system and not manually input.
    Then we create a pricing condition type like other discount or charge in ITEM LEVEL with your selected condition like customer, sales office, country and etc. However, remember to add the sales item line as part of the condition of this pricing condition.
    Update the pricing procedure and create price condition record with say "10" for the sales item line. Since you'll have line number 10 for all sales order as first line (no mater it is a free of charge item or not). This new condition will generate a "freight cost" in the pricing procedure. And it is only apply to first line, therefore, we only get once of this charge for one order.
    Hope this is your case and it works with ours.
    Michael

Maybe you are looking for

  • Sharepoint 2013 ItemAdded event receiver for renaming files is not working

    In SP 2013 I coded an event receiver that intercepts the ItemAdded event and it just renames the file. It is a synchronous event (I added <Synchronization>Synchronous</Synchronization> in the Elements.xml). This is the code:         public override v

  • Animated gif within Captivate movie?

    I'm trying to insert an animated gif into a Captivate movie, but when I do, the gif doesn't animate -- it just shows the first frame. Is there a trick to getting these animated gifs to actually play within the Captivate movie, without having to do a

  • Acrobat 5.0 & Reader 9.0 Problems reading web PDFs

    Greetings, I'm running Acrobat 5.0 and Reader 9.0. When I click on a web link to a PDF I receive this error message: i The Adobe Acrobat/Reader that is running can not be used to view PDF files in a Web Browser. Adobe Acrobat/Reader version 8 or 9 is

  • Too Many oracle ora_p0?? processes in Solaris 10

    I have a very intense update process which has about 8 SQL query - every one of them is having the HINT "NO_PARALLEL" as well as the stmt "Alter session disable dml;" before we execute the query. Even the Index is also hinted as no parallel. Every ti

  • Incoterms detailed

    Dear Guru i have detailed Incoterms but i need steps and process with screen shots. can anyone help??/ regards Mohammedrenu [email protected]