Autopatch - Error running adutlrcmp.pls in adprdcAdUtilrcmp()
Hi,
We have recently migrated our EBS 10g database from 32 bit RHEL4 server to 64 bit OEL5 server.
All the apps servers are runing on 32 bit RHEL 4 server.
After migrating all apps services are working fine.
Now i am trying to upgrade the database to 11g.
As part of that, applied 11g Release 2 interoperability patch for 11.5.10 (8815204).
The patch log file shoing the below error while compiling invalid objects.
===============================================
Running utl_recomp.recomp_parallel(8), if it exists
OWNER NUM_INVALID
PORTAL30_SSO 1
PUBLIC 26
CTXSYS 5
OLAPSYS 28
GRCMP 1
APPS 408
PORTAL30 30
7 rows selected.
Elapsed: 00:00:00.23
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.01
STATUS_MESSAGE
Running UTL_RECOMP.RECOMP_PARALLEL...
declare
ERROR at line 1:
ORA-03113: end-of-file on communication channel
memory exhausted
ORA-24323: value not allowed
Error accessing package DBMS_APPLICATION_INFO
ERROR:
ORA-03114: not connected to ORACLE
memory exhausted
memory exhausted
AutoPatch error:
Error running adutlrcmp.pls in adprdcAdUtilrcmp()
An error occurred while compiling invalids using the SYS.UTL_RECOMP() package.
Ignoring the failure and continuing...
==========================================================
What is the reason for this? Is it due to 32 bit and 64 bit diff?
How can i solve this issue?
Thanks,
While running adutlrp.sql below error occured
===================================
DOC> 1. Query showing jobs created by UTL_RECOMP
DOC> SELECT job_name FROM dba_scheduler_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>
DOC> 2. Query showing UTL_RECOMP jobs that are running
DOC> SELECT job_name FROM dba_scheduler_running_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>#
DECLARE
ERROR at line 1:
ORA-03113: end-of-file on communication channel
ERROR:
ORA-03114: not connected to ORACLE
DOC> The following query reports the number of objects that have compiled
DOC> with errors (objects that compile with errors have status set to 3 in
DOC> obj$). If the number is higher than expected, please examine the error
DOC> messages reported with each object (using SHOW ERRORS) to see if they
DOC> point to system misconfiguration or resource constraints that must be
DOC> fixed before attempting to recompile these objects.
DOC>#
ERROR:
ORA-03114: not connected to ORACLE
DOC> The following query reports the number of errors caught during
DOC> recompilation. If this number is non-zero, please query the error
DOC> messages in the table UTL_RECOMP_ERRORS to see if any of these errors
DOC> are due to misconfiguration or resource constraints that must be
DOC> fixed before objects can compile successfully.
DOC>#
ERROR:
ORA-03114: not connected to ORACLE
====================================================
SQL> select * from UTL_RECOMP_ERRORS
2 ;
OBJ#
ERROR_AT
COMPILE_ERR
158557
25-SEP-11 06.22.23.008812 AM
ORA-04045: errors during recompilation/revalidation of PORTAL30.WWSSO_PSTORE_EX
ORA-00980: synonym translation is no longer valid
158558
25-SEP-11 06.22.23.011485 AM
OBJ#
ERROR_AT
COMPILE_ERR
ORA-04045: errors during recompilation/revalidation of PORTAL30.WWSSO_API
ORA-00980: synonym translation is no longer valid
158559
25-SEP-11 06.22.23.013549 AM
ORA-04045: errors during recompilation/revalidation of PORTAL30.WWSSO_API_PRIVAT
E
OBJ#
ERROR_AT
COMPILE_ERR
ORA-00980: synonym translation is no longer valid
1608837
25-SEP-11 06.23.17.180561 AM
ORA-04045: errors during recompilation/revalidation of GRCMP.HFM_TMP_ORGANIZATIO
N_D
ORA-00980: synonym translation is no longer valid
OBJ#
ERROR_AT
COMPILE_ERR
SQL>
===================================================================
why ORA-03113: end-of-file on communication channel error occured? Please advise.
All PORTAL objects are invalid after migrating to 64 bit.
Thanks,
Similar Messages
-
Error running SQL and EXEC commands in parallel
Dear Gurus,
We are applying 3480000 and in process as soon as workers start it come out of adpatch session and give su the following error:
************* Start of AD Worker session *************
AD Worker version: 11.5.0
AD Worker started at: Sun Sep 02 2007 23:11:01
APPL_TOP is set to /sgmtemp/prodappl
Worker process 4 started.
Checking if all jobs have their actual and symbolic arguments in sync....
Done.
Writing jobs to run to restart file.
Reading jobs from FND_INSTALL_PROCESSES table ...
Done reading jobs from FND_INSTALL_PROCESSES table ...
Telling workers to read 'todo' restart file.
Done.
Starting phase 0 (A0): first
There are now 98197 jobs remaining (current phase=A0):
0 running, 123 ready to run and 98074 waiting.
Assigned: file adsysapp2.sql on worker 1 for product admin username APPLSYS.
Assigned: file cssruwq1.sql on worker 2 for product cs username CS.
Connecting to CSD......Unable to connect.
AutoPatch error:
The following ORACLE error:
ORA-01017: invalid username/password; logon denied
occurred while executing the SQL statement:
CONNECT CSD/*****
AutoPatch error:
Error while evaluating "Check Object"
Telling workers to quit...
3 workers have quit. Waiting for 1 more.
All workers have quit.
Error running SQL and EXEC commands in parallel
You should check the file
/sgmtemp/prodappl/admin/msbep004/log/3480000_sbm3.log
for errors.
applmgr@21:/sgmtemp/Oglupgr/3480000>
What could be the issue, i tried to connect CSD/CSD in sql and it connected.
Thanks in Advance
Regards
Kiran RanaHi Gurus,
Even i tried to recreate the FND_GLOBAL by performing the following, but still no luck:
output for scripts hearder value in FND_TOP:
applmgr@21:/sgmtemp/prodcomn/temp> cd $FND_TOP/patch/115/sql
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql> grep Header AFSCGBL*
AFSCGBLB.pls:/* $Header: AFSCGBLB.pls 115.78 2005/03/21 11:40:02 vbalakri ship $ */
AFSCGBLS.pls:/* $Header: AFSCGBLS.pls 115.33 2004/06/30 05:00:18 rsheh ship $ */
Output for script header value in Database:
SQL> select text from dba_source where name='FND_GLOBAL' and line <5;
TEXT
package FND_GLOBAL as
/* $Header: AFSCGBLS.pls 115.33 2004/06/30 05:00:18 rsheh ship $ */
package body FND_GLOBAL as
/* $Header: AFSCGBLB.pls 115.78 2005/03/21 11:40:02 vbalakri ship $ */
8 rows selected.
We tried to re-apply 4 hours back when one of the support personnal ask use to run those
scripts. one of them went with out any errors but second one went with errors
as follows:
First Script @AFSCGBLS.pls
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql> sapps @AFSCGBLS.pls
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 3 03:24:10 2007
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
DOC> | Copyright (c) 1993 Oracle Corporation Redwood Shores, California, USA|
DOC> | All rights reserved. |
DOC> +=======================================================================+
DOC> | FILENAME
DOC> | AFSCGBLS.pls
DOC> |
DOC> | DESCRIPTION
DOC> | PL/SQL specification for package: FND_GLOBAL
DOC> |
DOC> | NOTES
DOC> | This module is called by AutoInstall (afplss.drv) on install and
DOC> | upgrade. The WHENEVER SQLERROR and EXIT (at bottom) are required.
DOC> |
DOC> | HISTORY
DOC> | June, 1999 - Added function AUDIT_ACTIVE, bug 879630. Jan Smith.
DOC> | 11/19/01 MSkees - Added DBDrv line and 'SET VERIFY OFF' for ARU auto
DOC> | generation bug 2047263 build
DOC> |
DOC> *=======================================================================*/
Package created.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Second Script AFSCGBLB.pls:
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql> sapps @AFSCGBLB.pls <
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 3 03:27:15 2007
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Warning: Package Body created with compilation errors.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 -
Production
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql>
The second script (AFSCGBLB.pls) run's out with errors and changes status of almost 15000 objects as INVALID in database.
Regards
Kiran Rana -
Hi all,
While running patch 7303033,the following error comes.
Can anybody suggest possible solutions.
AutoPatch error:
aiurcl(): Discrepancy detected in restart file:
D:\oracle\PROD\apps\apps_st\appl\admin\PROD\restart\adpmain.rf9
Line 11966 from file = 'Generate JAR files'
Line to compare = 'Update apps.zip'In this patch,i cant proceed over the following error......any possible solution?
ADREBASE version: 12.0.0
The ADREBASE utility is going to rebase the dll files in
D:\oracle\PROD\apps\apps_st\appl\au\12.0.0\bin
D:\oracle\PROD\apps\apps_st\appl\au\12.0.0\bin\WIP115W.dll:
rebased from 0x7bc30000 to 0x7bc30000 (size 0x10000)
ADREBASE is complete.
You should check the file
D:\oracle\PROD\apps\apps_st\appl\admin\PROD_testapps\log\adrebase.log
for errors.
Copy DLLs of ALR to D:/oracle/PROD/apps/apps_st/appl/alr/12.0.0/bin
Copy DLLs of AP to D:/oracle/PROD/apps/apps_st/appl/ap/12.0.0/bin
Copy DLLs of AR to D:/oracle/PROD/apps/apps_st/appl/ar/12.0.0/bin
Copy DLLs of BOM to D:/oracle/PROD/apps/apps_st/appl/bom/12.0.0/bin
Line-wrapping log file for readability ...
Done line-wrapping log file.
Original copy is D:/oracle/PROD/apps/apps_st/appl/admin/PROD/log/adrelink.lsv
New copy is D:/oracle/PROD/apps/apps_st/appl/admin/PROD/log/adrelink.log
An error occurred while relinking application programs.
Continue as if it were successful [No] : -
AutoPatch error: Unable to find job when restart
OS is RHEL 5.7, and Oracle ebs R12.1.1 installed with patch applied 6078836, 11072566, 8576725...
Problem summary: AutoPatch error:Unable to find job when restarting, and FND_INSTALL_PROCESSES table does not exist
In the NLS patch update with 4 merged patches,
while 16 workers are running to create rdf files as below, it made my Putty (v0.60) crashed. Below example is succeeded case taken from the log of one worker to let you know which task was on-going...
Source: /d01/oracle/SID/apps/apps_st/appl/pa/12.0.0/reports/SF/PAXPCTCE.rdf
Successfully generated report "PAXPCTCE.rdf".
Generated 1 files successfully.
Generated 0 files with non-fatal warnings.
Generated 0 files with fatal errors.
adrepgen is exiting with status 0
End of adrepgen session
Date/time is Wed Sep 07 2011 15:22:44
Eventually, I had to run adctrl for changing job status <Failed>, and re-run adpatch. Then it ran several assigned jobs completed successfully.
Then again, it made my Putty crash, and repeated few times like that.
When there are 69 jobs remaining, autopatch error occurred.
There are now 69 jobs remaining (current phase=A1001):
0 running, 69 ready to run and 0 waiting.
Reading completed jobs from restart file (if any).
AutoPatch error:
Unable to find job when restarting.
When adctrl was checked to see worker status [1],
Enter your choice [1] : 1
Error: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved?
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?
Thanks as always for the help.
- SHError: The FND_INSTALL_PROCESSES table does not exist.
This table is used for communication with the
worker processes, and if it does not exist, it
means that the workers are not running,because
the ad utility has not started them yet.
How can this be resolved? If the table does not exist, then you cannot fix it.
Can I just re-run the patch as if it runs newly by ignoring the previous session of adpatch when asked the continuation of the previous session at the adpatch?
Will this help?Correct -- This is the only option you have.
Thanks,
Hussein -
Need help with AutoPatch error
I got this error message when running an .ldt inside a custom product patch
*Completed: file NFEE_EXEC_JAVA_VALIDATION_CCR.ldt on worker 1 for product xxnine username APPS.*
*AutoPatch error:*
*The following ORACLE error:*
*ORA-01458: invalid length inside variable character string*
*occurred while executing the SQL statement:*
*Failed to insert a record into AD_TASK_TIMING*
*Telling workers to quit...*
I can't figure out what's happening.
(EBS: R11.5)
Thanks.
Olavo Hansen.Your ldt file name (NFEE_EXEC_JAVA_VALIDATION_CCR.ldt) exceeds 30 characters - try with a shorter name.Please do NOT post the contents of MOS docs as this violates Oracle Support agreement policy -- Mentioning the Doc ID should be enough.
Thanks,
Hussein -
U6678700.drv fails with "AutoPatch error: Unable to allocate memory in proc
I am running an adpatch session to apply the u6678700.drv upgrade driver to an 11.5.10.2 instance running on AIX 6.1.
Just after the "JDBC connect string from AD_APPS_JDBC_URL is......" statement, I receive "AutoPatch error: Unable to allocate memory in procedure aiumab()."
I have confirmed and reconfirmed that all O/S, Software, ulimit and kernel settings are at the required minimum values/levels per Document ID# 761569.1.
What else can I check into as to the cause of this error?There are no entries in the DB Log of any relevance to the error.
ADPATCH LOG FILE:
Uploading PL/SQL direct execute exceptions from file ...
Done uploading PL/SQL direct execute exceptions from file.
Done validating PL/SQL direct execute exceptions file.
JDBC connect string from AD_APPS_JDBC_URL is
(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=lajeffeux03)(PORT=1521)))(CONNECT_DATA=(SID=UPG)))
AutoPatch error:
Unable to allocate memory in procedure aiumab().
You should check the file
/oracle/d01/oraupg/apps/apps_st/appl/admin/UPG/log/6678700_adpatch.log
for errors. -
Adpatch: Error running SQL and EXEC commands in parallel
Hi
I am applying R12 RUP2 to an instance at the moment. I had an OS crash (I'm running R12 on Linux on VMWARE) and on reboot attempted to restart the patch.
I now get an error as follows:
Error running SQL and EXEC commands in parallel
I must admit, I'm not a DBA, so if anyone has any ideas or has seen this before then it would be most appreciated!
Thanks
ChrisHi Adith
The patch is 5484000, RUP 2 for E-Business Suite R12
Here's the adpatch output:
Start date: Wed Sep 12 2007 15:15:14
0 "left over" javaupdates.txt files uploaded to DB: Wed Sep 12 2007 15:15:14
0 patches uploaded from the ADPSV format patch history files: Wed Sep 12 2007 15:15:14
Uploading information about files copied during the previous runs ...
0 "left over" filescopied_<session_id>.txt files uploaded to DB: Wed Sep 12 2007 15:15:14
****************** E N D O F U P L O A D ******************
End date: Wed Sep 12 2007 15:15:14
Already asked for the name of the patch directory.
(The answer was: /oracle/patches/5484000)
Already asked for the name of the patch driver file.
(The answer was: /oracle/patches/5484000/u5484000.drv)
Reading release list save file...
Done reading release list save file
Log and Info File sync point:
Wed Sep 12 2007 15:15:15
Turning off actions that reference unrecognized products.
Log and Info File sync point:
Wed Sep 12 2007 15:15:15
End of unrecognized products checking.
(The number of parallel workers is: " 2 ")
AutoPatch will run in parallel mode.
Did not need to apply new applterr.txt.
Skipping...
Determine directories to create for Specified driver
since no such action is present for this driver file
Skipping...
Determine Oracle Reports libraries to generate for Specified driver
since no such action is present for this driver file
Skipping...
Determine if need to generate message files for Specified driver
since no such action is present for this driver file
Skipping...
Create Directories for Specified driver
since no such action is present for this driver file
Number of invalid objects: 31057
Running SQL scripts and EXEC commands...
Determining which SQL and EXEC commands to run...
Validating PL/SQL direct execute exceptions file ...
Done validating PL/SQL direct execute exceptions file.
SERVICE_NAME/INSTANCE_NAME : [VIS]
connect_string : [(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ebusr12.chriseebee.me.uk)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))]
Done determining which SQL and EXEC commands to run.
Running SQL and EXEC commands in parallel...
Creating the AD_UTIL_PARAMS table...
Table AD_UTIL_PARAMS already exists, so dropping the table and recreating it.
Creating FND_INSTALL_PROCESSES table...
Already created fnd_install_processes table
Already created FND_INSTALL_PROCESSES_U1 index.
Already created AD_DEFERRED_JOBS table
Already created AD_DEFERRED_JOBS_U1 index.
Writing dependencies of jobs to run to appldep.txt file...
There are now 7569 jobs remaining (current phase=A0):
0 running, 5 ready to run and 7564 waiting.
Reading completed jobs from restart file (if any).
There are now 3474 jobs remaining (current phase=A18):
0 running, 1 ready to run and 3473 waiting.
Determining which java executables are supported by adJavaWorker...
Starting worker processes.
Worker process 1 started.
Worker process 2 started.
Checking if all jobs have their actual and symbolic arguments in sync....
Done.
Writing jobs to run to restart file.
Reading jobs from FND_INSTALL_PROCESSES table ...
Running: file adobjcmp.sql on worker 1 for product ad username APPLSYS.
AutoPatch error:
The worker should not have status 'Running' or 'Restarted' at this point.
Telling workers to quit...
************* Start of AD Worker session *************
AD Worker version: 12.0.0
AD Worker started at: Wed Sep 12 2007 15:15:34
APPL_TOP is set to /oracle/VIS/apps/apps_st/appl
************* Start of AD Worker session *************
AD Worker version: 12.0.0
AD Worker started at: Wed Sep 12 2007 15:15:34
APPL_TOP is set to /oracle/VIS/apps/apps_st/appl
All workers have quit.
AutoPatch error:
Error running SQL and EXEC commands in parallel
You should check the file
/oracle/VIS/apps/apps_st/appl/admin/VIS/log/adpatch.log
for errors. -
Error running SQL and EXEC commands in parallel when adpatch
Hi,
AutoPatch error:
aiprfp: product 'cle' not in release 'R120'
AutoPatch error:
Error running SQL and EXEC commands in parallel
Freeing includes hash table
Freeing fixes hash table
Freeing basedons hash table
Freeing entities hash table
You should check the file
/a02/prod/apps/apps_st/appl/admin/PROD/log/adpatch_7305220_1.log
for errors.
How to resolve this errror while applying patch 7305220.
Regards,Hi,
Please check logfile */a02/prod/apps/apps_st/appl/admin/PROD/log/adpatch_7305220_1.log* for any errors recoded.
Post error messages from this logfile.This is the main patch log file and it should show the same error "aiprfp: product 'cle' not in release 'R120'".
Thanks,
Hussein -
AutoPatch error : In Soft_prereq Checking...
Hello, experts~!
I try making partner applications with Oracle Applications 11.5.8 (HP-UX 11.0/32bit) to Oracle 9iAS (Compaq).
I follow the steps of doc# 146469.1(
http://metalink.oracle.com/metalink/plsql/ml2_documents.showNOT?p_id=146469.1 ).
And I'm on step 6.2 Register the Oracle Applications Framework Web Provider. But it was not registered as a Provider.
So I searched the problem on metalink.
And I tried installing a patch #2757379.
But when I installed the patch, there's a problem.
===================================================
ERROR Uploading "b2757379.ldt" usnig "afums.lct"
Unable to call adppdepRUnFndLoad routine
AutoPatch Error:
Error: In Soft_prereq Checking ...
===================================================
So I seaerched above agin.
For this patch's problem, there was a patch #2684116.
But after installed the patch #2684116, above patch error still...
Experts~!
Could you help me?
With regards,
Eunjoo Moon,
[email protected]Check this metalink notes:
11i.AD.I.6 Fails With Error "Pls-00302: Component 'Is_patch_applied2' Must Be Declared" [ID 556785.1]
Check this forum for simile issue discussions.
auto patch error
http://kr.forums.oracle.com/forums/thread.jspa?threadID=659976
Check this blog for reference,
http://beginapps.blogspot.com/2008/04/pls-00302-component-ispatchapplied2.html -
Error running 9i reports from forms.
Hi folks,
i am having problems running 9i reports from a form.
i have installed Oracle 9iDS on a Win XP machine with 256 MB RAM and a Pentium 1.4Ghz processor.
i also have a local Oracle 9i database. i have created several reports that i am trying to run from some forms but all efforts to date have failed.
below is some sample code.
declare
v_rid report_object;
v_rjob varchar2(100);
v_rptstatus varchar2(100);
v_jobid varchar2(100);
BEGIN
/*get handle to report object itself*/
v_rid := find_report_object('pbranchlist');
set_report_object_property(v_rid,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(v_rid,REPORT_DESFORMAT,'htmlcss');
set_report_object_property(v_rid,REPORT_DESTYPE,'CACHE');
set_report_object_property(v_rid,REPORT_SERVER,'repsrv');
set_report_object_property(v_rid,REPORT_COMM_MODE,synchronous);
v_rjob := run_report_object(v_rid);
v_rptstatus := report_object_status(v_rjob);
while v_rptstatus in ('RUNNING','OPENING_REPORT','ENQUEUED') loop
v_rptstatus := report_object_status(v_rjob);
message(v_rptstatus);
end loop;
if v_rptstatus = 'FINISHED' then
/*display report in browser*/
-- web.show_document('http://steve:8888/reports/rwservlet/getjobid'||
-- substr(v_rptsvrjob,instr(v_rptsvrjob,'_',-1)+1)||'?'||'server=repsrv','_blank');
web.show_document('/reports/rwservlet/getjobid'||substr(v_rjob,instr(v_rjob,'_',-1)+1)||'?'||'server=repsrv','_blank');
else
message('error running Report');
end if;
end;
pbranchlist is defined in the form,
repsrv is a report server i installed and explicitly started.
on clicking the button to run the above code, i get a message on the browser status bar as follows
opening http://steve:8888/reports/rwservlet/getjobid11?server=repsrv...
that's it. it stays like that forever and a progress bar showing the status of the operation gets to the halfway mark and stays there for up to 15 minutes.
I eventually halted the operation by clicking the stop button of the browser. The form then becomes totally non-responsive with the mouse indicator changing to the hour-glass shape and a small vertical bar moving rapidly back and forth at the bottom of the form window.
My only recourse then is to explicitly close the browser window.
I have already configured Reports to run in non single sign-on mode by setting SINGLESIGNON=NO in the rwservlet.properties file.
Is there anything i have not done properly?
Thanks in advance.Steve,
can you check the Reports cache directory if the Reports file got created? I would assume yes, but better check.
Frank -
Error run time DYNPRO_FIELD_CONVERSION
I have a dump:
Errore run-time DYNPRO_FIELD_CONVERSION
Verific. il 28.11.2007 h 02:12:16
A conversion error occurred.
Causa dell'errore
The current screen processing was terminated, since a situation
occurred from which it could not continue processing.
This is probably due to an error in the current screen of the ABAP
program.
Possibili soluzioni
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Analisi errori
The program flow was interrupted and could not be resumed.
Program "SAPMM06B" tried to display fields on screen 0106. However, an
error occurred while this data was being converted.
Indic. per la correzione
A conversion error occurred while the program was trying to
display data on the screen.
The ABAP output field and the screen field may not have the
same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. When attempting to
display the date on the screen, an error will occur that triggers the
error message.
Screen name.............. "SAPMM06B"
Screen number............ 0106
Screen field............. "EBAN-MENGE"
Error text............... "FX015: Sign lost."
Further data:
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
It is probably not possible to eliminate the system error
with ABAP alone.
If you have access to SAPnet, you can search for a relevant note
using the following keywords:
"DYNPRO_FIELD_CONVERSION" " "
"SAPMM06B" bzw. "MM06BO0R_RM06B-EPSTP"
"RM06B-EPSTP"
Ambiente sistema
SAP Release.............. "620"
Application server....... "assapoa"
Network address.......... "10.58.19.23"
Operating system......... "AIX"
Release.................. "5.2"
Hardware type............ "00CB585E4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 26
Short dump setting....... "full"
Database server.......... "ars005sapdb"
Database type............ "ORACLE"
Database name............ "PRD"
Database owner........... "SAPR3"
Character set............ "it_IT.ISO8859-1"
SAP kernel............... "640"
Created on............... "Jul 16 2006 20:40:53"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "139"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Utente, transazione.....
Client.............. 300
User................ "CONSULENTI"
Language key........ "I"
Transaction......... "ME52 "
Program............. "SAPMM06B"
Screen.............. "SAPMM06B 0106"
Screen line......... 26
Informazioni punto di interr.
The termination occurred in the ABAP program "SAPMM06B" in "RM06B-EPSTP".
The main program was "SAPMM06B ".
The termination occurred in line 14 of the source code of the (Include)
program "MM06BO0R_RM06B-EPSTP"
of the source code of program "MM06BO0R_RM06B-EPSTP" (when calling the editor
140).
The program "SAPMM06B" was started as a background job.
Errore verificatosi durante un'elaborazione Batch-Input
Dettaglio cd. sorgente
000010 *eject
000020 *----
000030 * Positionstyp aufbereiten *
000040 *----
000050 MODULE RM06B-EPSTP OUTPUT.
000060
000070 CALL FUNCTION 'ME_ITEM_CATEGORY_OUTPUT'
000080 EXPORTING
000090 PSTYP = EBAN-PSTYP
000100 IMPORTING
000110 EPSTP = RM06B-EPSTP
000120 PTEXT = T163Y-PTEXT.
000130
ENDMODULE.
Contenuto campi sistema
Cmpo SY Contenuto.................... Cmpo SY Contenuto....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY VU
SY-UCOMM
SY-TITLE Richiesta d'acquisto mod.: Riepilogo pos.
SY-MSGTY SY-MSGID
SY-MSGNO 000 SY-MSGV1
SY-MSGV2 SY-MSGV3
SY-MSGV4
Richiami/eventi attivi
N..... Tipo........ Nome..........................
Programma
Include Riga
Classe
1 MODULE (PBO) RM06B-EPSTP
SAPMM06B
MM06BO0R_RM06B-EPSTP 14
Variabili selezionate
1 MODULE (PBO) RM06B-EPSTP
SAPMM06B
MM06BO0R_RM06B-EPSTP 14
DIEN DIEN
4444
495E
EBAN-PSTYP 0
3
0
LIM LIM
4442
C9D0
RM06B-EPSTP
2
0
POTE TXP
5552
4800
T163Y-PTEXT Standard
57666676222222222222
341E4124000000000000
Chiamate applicazione
Il dump non riporta informazioni relative
Informazioni applicazione
Il dump non riporta informazioni relative
Note interne
The termination occurred in the function "dynpconv.c" of the SAP
Basis System, specifically in line 701 of the module
"//bas/640_REL/src/krn/dynp/dybas.c#4".
The internal operation just processed is "ENDM".
The internal session was started at 20071128021215.
Application server....... "assapoa"
Network address.......... "10.58.19.23"
Operating system ........ "AIX"
Release.................. "5.2"
Hardware type............ "00CB585E4C00"
Database server.......... "ars005sapdb"
Database type............ "ORACLE"
Database name............ "PRD"
Database user ID......... "SAPR3"
Rich. attivi nel nucleo SAP
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x11dd952a0
=> Stack address = 0xfffffffffffa920
=> Stack low = 0xfffffffffffa920
=> Stack high = 0xffffffffffff910
=> Stack Trace:
AixStack() at 0x1000206bc
CTrcStack2() at 0x1000207b4
rabax_CStackSave__Fv() at 0x1001520d4
ab_rabax() at 0x10014ef04
dyHandleError() at 0x1005a6850
dypcnvoXt() at 0x100cbd6cc
dynplend() at 0x1010cf268
dynpmcal() at 0x1010c6f60
dynppbo0() at 0x1010c5134
dynprctl() at 0x1010ce40c
dynpen00() at 0x100bd0c30
Thdynpen00() at 0x1000a1f7c
TskhLoop() at 0x1000a5298
tskhstart() at 0x1000bb0d8
DpMain() at 0x101579ca0
nlsui_main() at 0x10154d428
__start() at 0x1000002fc
!!! Invalid stack address encountered: 0x0
!!! Stack corrupted.
Lista dei programmi ABAP in oggetto
Tipo
Programma
DataGen Ora
Dim.car.
Prg
SAPMM06B
25.09.2007 16:07:55
514048
Prg
SAPMSSYD
05.06.2002 17:09:33
16384
Prg
SAPFSYSCALLS
14.02.2002 14:22:47
6144
Typ
T160
12.05.1997 15:22:15
2048
Prg
SAPFMMEX
18.11.2007 09:34:59
177152
Typ
TSTCT
14.02.1998 14:31:34
2048
Typ
TMED
27.08.1994 21:59:16
2048
Typ
TPRG
14.02.1998 14:06:12
2048
Typ
T160D
11.02.2000 14:20:36
5120
Typ
T160V
14.05.1998 22:44:11
6144
Typ
T168T
28.08.1997 09:05:04
2048
Prg
SAPLMEXF
18.11.2007 09:35:00
166912
Typ
T162
02.10.2001 13:56:13
2048
Prg
SAPLSTUP
17.06.2004 12:05:43
65536
Prg
SAPLCNDP
17.06.2004 15:06:47
163840
Prg
SAPFGUICNTL
09.01.2003 17:18:52
20480
Prg
SAPLOLEA
17.06.2004 15:12:42
78848
Prg
SAPLSGUI
09.01.2003 17:15:12
31744
Prg
SAPLSTTM
17.06.2004 15:08:30
75776
Prg
SAPLSBDC
07.01.2003 18:31:25
38912
Prg
SAPLSFES
17.06.2004 15:15:58
174080
Prg
SAPLURFC
17.06.2004 14:25:28
16384
Prg
SAPLSPLUGIN
14.02.2002 14:22:48
6144
Typ
SWCBCONT
15.11.2000 17:55:11
3072
Typ
OLE_VERBS
04.04.1995 16:02:20
2048
Typ
OLE_PA
04.04.1995 16:02:19
2048
Prg
SAPLSCNT
14.02.2002 14:22:47
24576
Prg
SAPSHDTV
17.06.2004 11:46:16
28672
Typ
EBANW
17.06.2004 15:55:16
21504
Prg
CL_CONTEXTFIELD_MM============CP
25.09.2007 16:07:49
9216
Prg
/1BCDWBEN/SAPLMEN0000
18.11.2007 09:35:16
237568
Prg
SAPLSENA
17.06.2004 14:19:40
28672
Typ
EBAN
13.11.2006 11:19:59
20480
Prg
CL_PROCESS_STATE_MM===========CP
25.09.2007 16:07:50
16384
Prg
SAPLSWUG
17.06.2004 14:22:25
53248
Typ
SWCONT
04.04.1995 16:18:01
2048
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Typ
SWOTOBJID
04.05.1995 15:20:52
2048
Typ
SWHACTOR
04.04.1995 16:18:07
2048
Prg
CL_GOS_MANAGER================CP
11.04.2001 13:02:00
17408
Prg
CL_GOS_VIEW_MANAGER===========CP
24.01.2002 20:31:22
22528
Typ
SIBFLPOR
15.11.2000 17:53:54
2048
Typ
SGOS_MVOBJ
24.07.2001 09:18:06
3072
Typ
BORIDENT
28.08.1997 08:38:50
2048
Prg
SAPLSUU1
17.06.2004 15:13:06
165888
Typ
USR02
17.06.2004 15:05:37
7168
Typ
USREFUS
07.01.2003 18:24:17
2048
Typ
SIBFLPORB
15.11.2000 17:53:55
2048
Prg
CL_GOS_TOOLBOX_MODEL==========CP
17.06.2004 15:04:37
38912
Typ
SGOS_MODL
24.07.2001 09:18:05
4096
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Prg
SAPLSWOR
17.06.2004 15:08:55
270336
Typ
SWOTRI
03.01.1996 15:29:13
2048
Typ
SWOTRETURN
20.08.1998 10:59:29
3072
Prg
SAPLSWOH
14.02.2002 14:22:48
7168
Typ
SWOTENV
11.02.2000 14:20:34
4096
Typ
TOJTD
15.11.1995 03:08:46
2048
Prg
SAPLRHS0
14.02.2002 14:22:47
11264
Prg
SAPLSDIFRUNTIME
17.06.2004 14:20:44
82944
Typ
DFIES
09.11.2000 14:07:05
8192
Typ
X031L
15.11.2000 18:03:28
5120
Prg
SAPLSDNT
17.06.2004 12:06:43
199680
Prg
SAPLSUGS
21.11.2002 10:20:02
29696
Typ
TOJTD
15.11.1995 03:08:46
2048
Typ
TOJTB
14.02.1998 14:02:55
8192
Typ
SWOTLI
04.04.1995 17:30:59
2048
Typ
T100
28.08.1997 09:04:45
2048
Prg
CL_EXITHANDLER================CP
17.06.2004 15:04:37
26624
Prg
CL_ABAP_TYPEDESCR=============CP
17.06.2004 14:19:33
21504
Prg
CL_ABAP_ELEMDESCR=============CP
17.06.2004 14:19:13
18432
Prg
CL_ABAP_DATADESCR=============CP
17.06.2004 14:19:13
14336
Prg
CL_ABAP_REFDESCR==============CP
17.06.2004 14:19:33
16384
Prg
CL_ABAP_STRUCTDESCR===========CP
17.06.2004 14:19:33
19456
Prg
CL_ABAP_COMPLEXDESCR==========CP
17.06.2004 14:19:13
13312
Prg
CL_ABAP_TABLEDESCR============CP
17.06.2004 14:19:33
17408
Prg
CL_ABAP_CLASSDESCR============CP
17.06.2004 14:19:33
23552
Prg
CL_ABAP_OBJECTDESCR===========CP
17.06.2004 14:19:33
25600
Prg
CL_ABAP_INTFDESCR=============CP
17.06.2004 14:19:13
19456
Prg
CL_ABAP_SOFT_REFERENCE========CP
29.03.2001 16:42:12
7168
Prg
CL_ABAP_REFERENCE=============CP
14.02.2002 14:22:46
6144
Prg
IF_EX_GOS_SRV_SELECT==========IP
04.12.2000 16:22:18
4096
Prg
%_CABAP
07.01.2003 18:31:23
23552
Typ
SXS_INTER
30.11.1998 15:55:16
2048
Prg
SAPLSEXV
17.06.2004 15:04:40
106496
Prg
CL_BADI_FLT_DATA_TRANS_AND_DB=CP
17.06.2004 15:04:37
33792
Typ
SXS_ATTR
20.08.2001 12:23:27
4096
Typ
V_EXT_ACT
09.11.2000 14:27:05
2048
Typ
SXC_EXIT
09.11.2000 14:23:43
2048
Prg
CL_EX_GOS_SRV_SELECT==========CP
17.06.2004 15:04:37
13312
Prg
%_CSXRT
17.06.2004 15:04:37
11264
Prg
CL_EXIT_MASTER================CP
17.06.2004 15:04:37
13312
Typ
V_EXT_IMP
09.11.2000 14:27:05
2048
Typ
V_EXT_IMP
09.11.2000 14:27:05
2048
Prg
SAPLBDLS
17.06.2004 11:45:48
176128
Typ
T000
11.09.1997 10:17:18
4096
Typ
SWOTRTIME
14.02.1998 10:19:46
3072
Prg
%_CSWOB
14.02.2002 14:22:46
13312
Typ
SWOTINVOKE
14.02.1998 10:18:40
6144
Typ
SWOTLV
04.12.2000 14:59:45
10240
Prg
SAPLSWCD
17.06.2004 15:06:55
78848
Prg
RBUS2105
13.11.2006 11:20:02
57344
Prg
CL_GOS_PUBLICATION============CP
13.11.2000 16:31:37
15360
Prg
SAPLSGOSHIST
17.06.2004 14:23:50
46080
Typ
EBKN
16.06.2004 13:09:57
9216
Typ
T161
16.06.2004 13:14:35
5120
Typ
T161T
14.02.1998 10:55:58
2048
Typ
CMMDA
18.09.2001 10:02:31
4096
Prg
SAPLMMDA
04.09.2006 11:00:54
65536
Typ
TWLAD
13.08.1997 14:04:45
2048
Typ
TTXID
27.08.1999 17:40:33
3072
Prg
SAPLSTXD
17.06.2004 15:06:22
347136
Typ
STEXTNAME
18.09.2001 10:03:52
1024
Typ
STXDRID
26.02.1999 14:48:42
2048
Typ
STXDRLANG
26.02.1999 14:48:42
2048
Typ
STXDRNAME
26.02.1999 14:48:42
2048
Typ
STXDROBJ
26.02.1999 14:48:42
2048
Typ
THEAD
09.11.2000 14:15:08
6144
Prg
CL_ABAP_CHAR_UTILITIES========CP
07.01.2003 18:31:23
11264
Typ
STXH
17.06.2004 14:15:46
6144
Typ
TCATALOG
25.05.1998 12:19:20
3072
Typ
T168F
27.05.1992 20:16:27
3072
Typ
T168
27.05.1992 17:53:38
3072
Prg
SAPLMECCP
25.09.2007 16:07:53
39936
Prg
CL_BADI_MM====================CP
08.01.2003 16:43:11
9216
Prg
%_CCXTAB
14.02.2002 14:22:46
6144
Prg
SAPLEINH
25.09.2007 16:07:53
56320
Typ
T001W
16.06.2004 13:14:17
9216
Prg
SAPLVDAT
19.02.2002 12:59:51
25600
Typ
T163Y
28.08.1997 09:05:01
2048
Prg
SAPCNVE
14.02.2002 14:22:47
6144
Prg
SAPLOMCV
17.06.2004 10:54:26
16384
Prg
CL_EX_BADI_MATN1==============CP
17.06.2004 10:27:52
22528
Prg
IF_EX_BADI_MATN1==============IP
17.06.2004 10:53:59
4096
Typ
TMCNV
24.02.1999 03:33:25
3072
Typ
RM06B
17.06.1998 03:23:02
10240
Lista tabelle interne
Il dump non riporta informazioni relative
Indice delle tabelle applicative
Programma
Nome................ Contenuto..1.......2........3........4........5....+....
SAPMM06B
SYST |00000000000x010000000000000000
EBAN |300001100895000010NB B NB 1 Elena Varett20071
*EBAN | 00000 00000
EBKN | 0000000 00000000 000000x0C
AEBAN |3000011008950NB BBEUR |
EBANW |300001100895000010NB B NB 1 Elena Varett20071
RM06B | 00000000000000000010 00
*RM06B | 00000000000000000000 00
RM06E | 000000000000000 00000000 00000
TPRG |300IW2Formato settimana Sett. |
T001W |3006 PIATTAFORMA DI LEINI' 6 CEDI6 0000000
T023 |
T024 |
T160 |300ME52 VB B |
T160V |300C1XX A XX X X |
T161 |300BNB 000100102NBB NB 00000
T161T |300INB BRichiesta d'acquisto|
T168 |300B AB *** 1 106 0x0C0x0C0x0C0x0C|
T168F |300B AB XXX |
T168T |300IB0106002 |
TTXID |EBAN B04 X
T163K | |
T163Y | Standard |
T001L |
T160D | XXXXXXXXXXXXXXXXXXXXXX
T161E | |
SAPFMMEX
TMED |300BB |
SAPLMEXF
T161 |300BNB 000100102NBB NB 00000
T162 |300PT0B ...................................
SAPLSUU1
USR02 |300CONSULENTI ÷x9Fw'x97[æÆ0000000000000000A
USREFUS |300CONSULENTI
SAPLSWOR
TOJTB |BUS2105 XI RBUS2105
SWOTLV |BUS2105 EXISTENCECHECK M
TOJTD | |
SAPLBDLS
T000 |300Mandante produzione Arenzano EUR
SAPMM06B
*RM06E | 000000000000000 00000000 00000
MARA | 00000000 00000000
T006 | 00 00000000000000x0C 0
SAPLVDAT
TPRG |300IW2Formato settimana Sett. |
SAPLOMCV
TMCNV |300MATCONV 0x120000000x12
Directory delle tabelle applicative (inf. di gestione)
Programma
Nome.......................... tempo..........lungh....
SAPLOMCV
SYST 20010612125650 00002404
EBAN 20061113111959 00000892
*EBAN 20061113111959 00000892
EBKN 00000421
AEBAN 20000323224119 00000027
EBANW 00000896
RM06B 20000323224119 00000529
*RM06B 20000323224119 00000529
RM06E 20020124202505 00001154
TPRG 20000323231030 00000032
T001W 20040617141548 00000338
T023 20040616131428 00000102
T024 20040616131429 00000352
T160 00000035
T160V 00000050
T161 20040616131435 00000095
T161T 00000029
T168 00000035
T168F 00000044
T168T 00000013
TTXID 00000058
T163K 20000323230840 00000023
T163Y 00000026
T001L 20000323230832 00000069
T160D 00000069
T161E 20000323230840 00000025
SAPFMMEX
TMED 00000010
SAPLMEXF
T161 00000095
T162 00000234
SAPLSUU1
USR02 00000226
USREFUS 00000067
SAPLSWOR
TOJTB 00000453
SWOTLV 00000701
TOJTD 00000033
SAPLBDLS
T000 00000107
SAPMM06B
*RM06E 20020124202505 00001154
MARA 20071118093457 00001118
T006 20001109142345 00000080
SAPLVDAT
TPRG 00000032
SAPLOMCV
TMCNV 00000062
Blocchi di contr. CONT ABAP
Include Riga Codice sorg.
Ind. Nome FI Co Par01 Par2. Par3. Par4. Tab.
MM06BO0R_RM06B-EEIND 25 EXIT.
2502 BRAX 00
MM06BO0R_RM06B-EEIND 27 ENDSELECT.
2503 BRAX 00
2504 SQLS 08
MM06BO0R_RM06B-EEIND 31 ENDMODULE.
2505 ENDM 00
2506 -
MM06BO0R_RM06B-EPSTP 7 CALL FUNCTION 'ME_ITEM_CATEGOR
2507 FUNC 00
2508 FUNC 00
2509 PAR2 02 0336
2511 FUNC 10
2512 PAR2 01 03B9
2514 PAR2 01 03BA
2516 FUNC FF
MM06BO0R_RM06B-EPSTP 14 ENDMODULE.
>>>>> ENDM 00
2518 -
MM06BO0V_VRTKZ 6 CASE EBAN-VRTKZ.
2519 BREL 04
MM06BO0V_VRTKZ 7 WHEN '1'.
2520 when 00 02 0090
2522 BRAN 02
2523 BRAX 00
MM06BO0V_VRTKZ 8 RM06B-MKNTW = '3 '. "3 Nachkom
2524 MOVL 00 02 0136
MM06BO0V_VRTKZ 9 WHEN '2'.
2526 BRAX 00
Fine dell'analisi err. run-time
Help me.
Thank youHello Maurizio,
Thre screen field EBAN-MENGE is unable to handle a sign along with the value.
Regards,
Ammey Kesarkar -
"Error running javac.exe compiler" when using ant to compile Eclipse plugin
Hi
I encounter an error "Error running C:\jdk1.5.0_06\bin\javac.exe compiler" when building my project using ant1.7.
My project has 10 eclipse plugins, and each plugin is compiled by invoking following ant target
<!-- ===================================================================
Compile specified plugin
target parameters:
param.plugin.dir: the plugin directory
param.plugin.targetJarFile: the name of jar file for the given plugin
param.plugin.src.dir: the folder name of source codes. Note: it is relative path name
param.fork: indicate if another process is forked to run javac
=================================================================== -->
<target name="compilePlugin">
<!-- Prepare compile environment -->
<!-- Delete obsolete build folder -->
<delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
<!-- Delete obsolete jar file -->
<delete file="${param.plugin.dir}/${param.plugin.targetJarFile}" quiet="true"/>
<mkdir dir="${param.plugin.dir}/${build.dir}"/>
<!-- Compile source codes -->
<javac srcdir="${param.plugin.dir}/${param.plugin.src.dir}"
destdir="${param.plugin.dir}/${build.dir}"
failonerror="${javacFailOnError}"
verbose="${javacVerbose}"
debug="${javacDebugInfo}"
deprecation="${javacDeprecation}"
optimize="${javacOptimize}"
source="${javacSource}"
target="${javacTarget}"
fork="${param.fork}" memoryInitialSize="256m" memoryMaximumSize="512m">
<classpath refid="compile.classpath" />
</javac>
<!-- Create plugin jar file -->
<copy todir="${param.plugin.dir}/${build.dir}" failonerror="true">
<fileset dir="${param.plugin.dir}/${param.plugin.src.dir}" excludes="**/*.java, **/package.htm*" />
</copy>
<jar jarfile="${param.plugin.dir}/${param.plugin.targetJarFile}" basedir="${param.plugin.dir}/${build.dir}"/>
<delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
</target>
Since each of first 9 plugins contains less than 500 java source files, we always set "param.fork" to false when invoking this ant target.
For the 10th plugin, it has about 1000 source files. If we set "param.fork" to false, we will get the error "Error running javac.exe compiler". So we have to set "param.fork" to true when compiling it. This week, this plugin contains about 1250 files and we get the same error again when compiling it. I tried to increase the "memoryMaximumSize" to "768", but still couldn't get through it.
BTW, There are about 150 jar files in our classpath for compiling plugins. Do many jar files cause this problem?
Any help is highly appreciated.
Many thanks
OceanmanI encountered a very similar error and I was able to resolve it by removing the following parameters from the javac task:
fork="${param.fork}"
memoryInitialSize="256m"
memoryMaximumSize="512m"My values were not the same as yours, before I removed them, the values were set to:
fork="true"
memoryInitialSize="256m"
memoryMaximumSize="256m" Not sure why this fixed my problem but it did. I was using Ant 1.7 and Java 1.6_07 hope this helps. -
Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.
I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??
-
Hi,
When I was simulating the 'eMail Response - Process Message', I had been getting the below error when entering to 'Create activity Process' step.(provided all the inputs per testmode.xml file)
Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(SBL-BPR-00183)
I increased the log level to 5 and got the below message in log file
ObjMgrBusServiceLog InvokeMethod 4 0000000251b51f04:0 2013-06-10 01:30:12 Begin: Business Service 'XML Hierarchy Converter' invoke method: 'DocToHier' at 12cc4240
ObjMgrBusServiceLog Error 1 0000000251b51f04:0 2013-06-10 01:30:12 (xmlcnvsv.cpp (548)) SBL-EAI-00246: XML Hierarchy Converter error - empty input message, expecting an XML document in <Value> of input arguments
I was wondering I could not find 'XML Hierarchy Converter' business service in 'eMail Response - Process Message' and 'eMail Response - Create Activity' sub process.
Can any body help me out in this regard.
Thanks in advance..
JagadeeshHi Naresh,
yes, I am using the delete polling strategy. Here is the .jca file:
<adapter-config name="Pozadavky" adapter="Database Adapter" wsdlLocation="Pozadavky.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/PozadavkyConn" UIConnectionName="PozadavkyConn" adapterRef=""/>
<endpoint-activation portType="Pozadavky_ptt" operation="receive">
<activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
<property name="DescriptorName" value="Pozadavky.Pozadavky"/>
<property name="QueryName" value="PozadavkySelect"/>
<property name="MappingsMetaDataURL" value="Pozadavky-or-mappings.xml"/>
<property name="PollingStrategy" value="DeletePollingStrategy"/>
<property name="PollingInterval" value="120"/>
<property name="MaxRaiseSize" value="1"/>
<property name="MaxTransactionSize" value="10"/>
<property name="NumberOfThreads" value="1"/>
<property name="ReturnSingleResultSet" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config> -
my rental download shows error. it happened once on my movie purchase, and twice on my season tv episode. this time it's a rented movie but i cant download it completely cus of the error... pls help
What does the error message say? (Include error message numbers if you're getting any, please.)
Maybe you are looking for
-
Hi, I have a need to open blob_content files from wwv_document$ and read/print them in a portlet. Can i do that using dbms_blob?. If so can somebody guide me the steps to follow? Else is there any other way sicne the files are really huge and i need
-
I can't see any photos in "My Photo Stream" Folder
I opened up photo stream in my 4s(6.1.2),when I take some photos,I can see the new photos in the photo stream page on 4s,and I can see them in my MBA(10.8) and apple tv,but there aren't any photos sync into my PC(win7 sp1 x64),I reinstall icloud cont
-
I have an HP PhotoSmart Plus B210 Printer and an HP Officejet Pro 6830. Both printers are printing "gibberish". It may print 1/2 page of what I want to print, but then it prints a bunch of random letters or symbols or black lines all over the page. T
-
Can I change background color on iMovie 11?
I'm sure you all are familiar with the Blobs background on iMovie 11, is there any possible way I can change the color of this? Thanks!
-
Form Distribution New Computer
I have a new computer & now Forms Central will not let me create and distribute a form? I get a you must subscribe prompt.