AutoPlay dialog box

When I insert my card reader with memory card into the USB port, the AutoPlay dialog box does not come up where I can select where I want my pictures to be imported, i.e. windows picture gallery, etc.  It use to in the past???????

HI  Generally, this forum meant for printing problems. Try following these basic steps and check if that may help: 1. Open autoplay by clicking the Start button, and then clicking Control Panel. In the search box, type autoplay, and then click AutoPlay.2. To turn autoplay on, select the Use AutoPlay for all media and devices check box.3. Click Save. Now check for any difference. If the same persists I suggest trying the following forum, the active users are more expertize with such an operating system configuration issues:http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/bd-p/OS Regards,Shlomi 

Similar Messages

  • Foreign Characters in Windows Vista AutoPlay Dialog Box

    I have an iPhone 3G, using Vista. Upgraded to iTunes 8 (really like the changes so far), and also upgraded to 2.1 (so far so good), but have found a strange behavior when I connect my iPhone to my computer. I have searched the forums and have not found anyone discussing this yet.
    As per usual, the AutoPlay dialog box opens, asking me if I want to view or import pictures, but my device is now called "iPhone 㽳筨緾", or at least that's the most recent name. I have discovered that in my registry there is a key called
    [HKEYCURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerAutoplayHandlersKnownD evicesWpdDeviceHandler_USB#VID_05AC&PID_1292&MI00#0]
    that I suspect is causing the problem. I can edit the name of my device back to "iPhone", but every time I reconnect it, the name changes, and it has never been the same. I have shown 2 examples below:
    Edited version: [HKEYCURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerAutoplayHandlersKnownD evicesWpdDeviceHandler_USB#VID_05AC&PID_1292&MI00#0]
    "\\\\?\\USB#VID05AC&PID_1292&MI00#0#{6bdd1fc6-810f-11d0-bec7-08002be2092f}"=""
    "Label"="iPhone"
    "Icon"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
    00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,75,00,\
    73,00,62,00,61,00,61,00,70,00,6c,00,72,00,63,00,2e,00,64,00,6c,00,6c,00,2c,\
    00,2d,00,31,00,30,00,31,00,00,00
    "\\\\?\\USB#VID05AC&PID_1292&MI00#0#{6ac27878-a6fa-4155-ba85-f98f491d4f33}"=""
    Reconnect #1:
    [HKEYCURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerAutoplayHandlersKnownD evicesWpdDeviceHandler_USB#VID_05AC&PID_1292&MI00#0]
    "\\\\?\\USB#VID05AC&PID_1292&MI00#0#{6bdd1fc6-810f-11d0-bec7-08002be2092f}"=""
    "Label"="iPhone㽳燰"
    "Icon"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
    00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,75,00,\
    73,00,62,00,61,00,61,00,70,00,6c,00,72,00,63,00,2e,00,64,00,6c,00,6c,00,2c,\
    00,2d,00,31,00,30,00,31,00,00,00
    "\\\\?\\USB#VID05AC&PID_1292&MI00#0#{6ac27878-a6fa-4155-ba85-f98f491d4f33}"=""
    Reconnect #2:
    [HKEYCURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerAutoplayHandlersKnownD evicesWpdDeviceHandler_USB#VID_05AC&PID_1292&MI00#0]
    "\\\\?\\USB#VID05AC&PID_1292&MI00#0#{6bdd1fc6-810f-11d0-bec7-08002be2092f}"=""
    "Label"="iPhone㽳筨緾"
    "Icon"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
    00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,75,00,\
    73,00,62,00,61,00,61,00,70,00,6c,00,72,00,63,00,2e,00,64,00,6c,00,6c,00,2c,\
    00,2d,00,31,00,30,00,31,00,00,00
    "\\\\?\\USB#VID05AC&PID_1292&MI00#0#{6ac27878-a6fa-4155-ba85-f98f491d4f33}"=""
    I hope these foreign characters are coming across in this message, they show up right now as I type.
    My suspicion is something in the .dll file that points to the icon, but I'm not a computer person by training.
    I hope my description of the problem has been adequate. Anyone else experiencing this behavior as well?

    I am also having the same issue since my updates, and i find that the extra characters change (without me doing anything) each time i connect my iphone to my computer (vista).
    Also since the updates, i was getting the blue screen of death when connecting my iphone to my pc, but after re-downloading the software & re-installing, i have not had any issues in regards to my pc crashing.
    Not sure if the two are related somehow or if something has become corrupt on my pc.
    Is there any information on this one yet?
    Cheers,
    Shelle

  • When i plug in my sd card into the computer, the "autoplay dialog box" does not appear

    HP Pavilion Slimline s5 - 1114 Desktop    Windows 7
    This question was solved.
    View Solution.

    Have you changed the mixed media setting in Auto Play to "ask me every time"?
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • How to stop internet explorer dialog box

    Hi all. I'm new here. I've just added a flash image ( a moving one ) to my web page. It's like a moving logo. I've used this code
    <object width="150" height="95"> <param name="movie" value="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf"></param><param name="flashvars" value=src=http://localhost/school/logovid.flv&controlBarMode=none&controlBarAutoHide=false&playButto nOverlay=false&loop=true&autoPlay=true&scaleMode=stretch"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://fpdownload.adobe.com/strobe/FlashMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="150" height="95" flashvars="src=http://localhost/school/logovid.flv&controlBarMode=none&controlBarAutoHide=false&playButto nOverlay=false&loop=true&autoPlay=true&scaleMode=stretch"></embed></object>
    to get it working. It's fine in safari, firefox, chrome and flock. But in opera I get a dialog box asking if it's ok to connect  to ftp.adobe.com and then the image doesn't display. Also in IE I get a dialog asking me if it's ok to allow something.
    I can live with the opera problem because it's a minority but I really need to resolve the IE issue because so many people use it.
    Any help very much appreciated.
    Marcus.

    Hi Mike,
    >>Basically i want all users to get restricted to IE9.
    Internet Explorer 10 will be available as an “Important” update through the Automatic Update feature of Windows Update. Users of Windows 7 Service Pack 1, who have opted to
    download and install updates automatically through Windows Update (recommended setting), will automatically be upgraded to Internet Explorer 10.
    However, we can prevent users from upgrading to IE 10 via Windows Server Update Services (WSUS) or System Center 2012 Configuration Manager.
    Regarding how to prevent users from upgrading to IE10 or IE11, the following two articles can be referred to for more information.
    Internet Explorer 10 Delivery through Automatic Updates
    http://technet.microsoft.com/en-us/ie/jj898508.aspx
    Internet Explorer 11 Delivery through Automatic Updates
    http://technet.microsoft.com/en-in/ie/dn449235
    Best regards,
    Frank Shen

  • Any way to see ICONS in Open and Close Dialog boxes?

    Is there any way to see ICONS in Open and Close Dialog boxes, instead of just lists of items names?
    I know you can preview one at a time, but I'd love to see all my artwork as picture icons, just as you can in a finder window.
    Windows does this, but not OSX that I know of. Is there a third party app that enables you to see icon view in the Open and Close Dialogs?

    Thank you Steve Jobs. I guess that feature has been added in Leopard. Now there really is nothing that I'll miss from Windoze.

  • Open dialog box....

    Hi Everyone,
    I have designed a form in which user has to input the path where he wants to save his report.
    Like c:\test.PDF
    what i want to do is that when user click a button againts this field a dialog box should appear in which he can select the location, like in Notepad File > Open or File Save.
    and after selecting the path and closing the box the path should be display in the text field which i have provid to my user. Is it possible to attach the default file extension automatically in the text box?
    like if user have written c:\test it should be automatically converted into c:\test.PDF? Any Idea?
    How is this posible in Developer 6i. I will be very thankful if someone can help me solving this problem.
    Regards,
    Imran

    use GET_FILE_NAME - it's documented in the help - client server only

  • I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

    I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

    Canon 1DX support was added to ACR in version 6.7, 7.1.  An updated CS6 should be at level ACR 8.6.  If your ACR is not at level 8.6 try using CS6 menu Help>Updates.  If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
    Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

  • When I try to open photoshop I get a "help adobe improve it's produts" dialog box every time and it freezes

    When I try to open photoshop I get a "help adobe improve it's produts" dialog box. No matter what I do, I get this box when I try to open a file in photosop never opens although it appears to be

    Hi Steadyalberta,
    Something might be preventing Photoshop from being able to save your selection on the dialog window properly. You might try right clicking and choose Run as Administrator on the Photoshop icon when launching (Windows) or test if the behavior persists when using a newly created admin user account.
    Hope that helps,
    - Dave

  • Why doesn't firefox close out when I'm done with it and close it; when next I try to open firefox again I get a dialog box telling me firefox is open and to close it or restart my computer? I'm tired of doing that one of more times a day.

    1. This happens at least once a day, and sometimes multiple times. Today it's happened twice, thus far. My home page is FoxNews.com and if I leave it up overnight or for longer periods during the day firefox doesn't allow the refresh of the home page it just goes to yahoo 404--error can't find the webpage. Then when I enter FoxNews.com it adds a /error to the url and doesn't allow me to go to MY homepage. So I close firefox and then if I try to reopen it and then I get the dialog box saying firefox is open and to close it or restart my computer. Very aggravating. 2. Also the Adobe flash drive update always fails. 3. Webpages get in loops and fail to load to the point I have to stop and refresh or close out and reopen.

    One situation in which Command+w or Ctrl+w might not work is if the "focus" is in a plugin such as the Flash player used on Youtube after you interact with the player controls. Firefox will continue to send the keyboard input to the plugin until you move the focus back to the page. Does that account for any of the problem?

  • In javascript how to invoke save as dialog box ,which saves .pdf files only

    Through javascript i generated a save as dialog box. the main problem is , it is only saving .html and .doc files by default. how to restrict it to save only .pdf files.
    the code i used is
    function SaveFile(fname)
    document.execCommand('SaveAs', null, fname)
    <input type="button" value ="save" onclick="SaveFile('');">
    /**********************************************************************/

    this is actually a Java forum its slightly different from javascript
    but try this not sure if it helps
    <input type="button" value ="save" onclick="SaveFile('.pdf');">

  • File Format options not appearing in the Save As dialog box - InDesign CC

    So i was working with a legacy file (an .eps from illustrator4) that i placed into InDesign CC, and when i went to export as a jpg, the option to choose a different file format from the bottom of the dialog box was gone. Did i hit some crazy shortcut to remove the options, or is this a bug that occurs when working with certain legacy files? I've restarted InDesign, rebooted my laptop, deleted my Adobe preferences, reset my adobe warning dialogs, and I still cant export or save as any other file format because the option doesnt appear. And it doesnt matter if i create a new file or open an existing one. Please help. See the pic below. No option for file format on the bottom of the dialog box.

    Thank you very much!
    Reinstalling worked, but i'd still kinda like to know what caused this problem & if this will continue to happen. To me, reinstalling is pretty much like having to reboot anytime you go to IT -- they dont know what the problem is, they just know how to fix/stop it.

  • Copy/paste in save as dialog box

    I am using your pdf plugin with Safari but when I click the save icon I cannot paste text into the file name box.  I have to manually type it in.  Can I copy & paste in the save dialog box?

    Safari 6.0.1 OS X 10.8.2 Reader 10.1.4
    The plugin works for me I just need copy/paste ability when saving the file.

  • How can I add form field value to the file name in save as dialog box

    I do not want the form to be saved automatically, just want the form to auto populate the "file name" only.
    A little background on the forms I want to use:  My company has 70 retail outlets, I'll use one of our pdf forms called an "Incident Report" as an example.  I would like for a store manager to be able to complete the form, then email the form to the main office (I already have javascript to add field values and form name to the email subject line), once the main office receives it, I want for them to be able to file the pdf electronically on our server.  We have mutliple forms that we use so I do not want any of the forms to automatically save anywhere, (at this time anyway) I just want the office personnel to be able to click "save as" (or whatever they will need to click) and the form automatically add certain field values from the pdf they have received, of which will be different each time the form is sent to the office (Date, store #, employee name etc.) in addition to the name of the form in the "File name" of the "Save As" dialog box.  The main office employees will decide into which server file the pdf should be saved.
    I'm using Acrobat 8 professional, the stores and office personnel use Adobe reader.
    One little note:  We currently print and file a lot of paper on a daily bases, as soon as I can get this to work, we are going green.
    Me and a lot of trees in this will really apprecitate any help you can give with this!  :-)

    You might want to take a look at the document "Developing Acrobat Applications Using JavaScript" (js_developer_guide.pdf) which is part of the Adobe Acrobat SDK, which can be downloaded here. Read the "Privileged versus non-privileged context" (p. 45ff.). You will find an example for "Executing privileged methods in a non-privileged context". Should be almost exactly what you are looking for.
    Small Outline: For security reasons ("the user always has to know what's going on") you are not allowed to use the "Doc.saveAs"-method without the user permission (--> in a non-privileged context). In order to reach the goal of a privileged context you can use a trusted function. You do this by creating a JavaScript file (*.js) in either the Application-JavaScript-Folder (default location on Windows systems: "%ProgramFiles%\Adobe\Acrobat 10.0\Acrobat\Javascripts") or the User-JavaScript-Folder (default location on Windows systems: "%AppData%\Adobe\Acrobat\10.0\JavaScripts"). Add the following content to the new file:
    myTrustedBrowseForDoc = app.trustedFunction( function ( oArgs ) {
         app.beginPriv();
              var myTrustedRetn = app.browseForDoc( oArgs );
         app.endPriv();
         return myTrustedRetn;
    myTrustedSaveAs = app.trustedFunction( function ( doc, oArgs ) {
         app.beginPriv();
              var myTrustedRetn = doc.saveAs( oArgs );
         app.endPriv();
         return myTrustedRetn;
    The developer guide actually wants you to add this content to the existing "config.js" file. I recommend creating a new file, since its easier to deploy in a network. Either way, every client/user who needs to be able to save documents this way, needs this JavaScript Code in his Application/User-JavaScript-Folder.
    Within the Acrobat Document, which you want to obtain a certain file name, you can now use the trusted functions "myTrustedBrowseForDoc" and "myTrustedSaveAs" to store the file. To call the trusted functions and deliver the file name you can either you use a form field (button) or you add a new menu item. Add the following JavaScript Action to the button/menu item and change "Roller Coaster" to the name of the field which contains the value which you want to become the new file name:
    var fileName = this.getField("Roller Coaster").valueAsString;
    try {
         var oRetn = myTrustedBrowseForDoc({bSave: true, cFilenameInit: fileName + ".pdf"});
         try {
              myTrustedSaveAs(this, { cPath: oRetn.cPath, cFS:oRetn.cFS });
         catch(e) {
              console.println("Save not allowed, perhaps readonly.");
    catch(e) {
    console.println("User cancelled Save As dialog box");
    Good Luck!

  • 'Save as Type' box in 'Save As' dialog box

    I recently downloaded 'Rocket PDF' and now if I try to save any PDF. document, the only choices in the 'save as type' box are 'Rocket PDF' or 'All files'. No more 'Adobe Reader PDF. appears as a choice. I uninstalled 'Rocket PDF' and in the 'Default changes' I put 'Adobe Reader as the default to open 'PDF.'. Still, the only choices on the 'save as type ' are 'Rocket PDF' or 'All files'! How do I get Adobe Reader PDF' back as a choice in the 'save as type' box and delete 'Rocket PDF' as a choice?

    Sorry I wasn't clear! When I try to save a 'PDF' file the "save as" dialog box opens. At the bottom the 'file name'is listed and below that it says, "save as type". You then pick what file type you want, like Adobe Reader for PDF. It used to say Adobe Reader as one of the choices but when I downloaded "Rocket PDF" it only says "Rocket PDF or "all files" as the only choices to save the document, no more Adobe Reader as a choice. I have deleted Rocket PDF and under 'default programs (Start button) I have set the "Pdf. files to open with Adobe Reader. Rocket PDF is still listed or' all files', nothing else! How can I get Adobe Reader as a choice back in the 'save as type' box?
    Thanks for any help.

  • I lost the dial up connection dialog box. I unchecked a check item in the dial connetion box. How do I get the dial up connection back?

    I established a dial up connection by updating to automatic the remote managers and telephony in administrative tool services area on my XP system according to firefox help instructions.
    At first I had a dial up connection but I unchecked an item in the
    dial up connection box. I am not sure what I unchecked or toggled
    off. I then lost the dial up connection. I need to get the dial connection dialog box back. What needs to be done
    Thank you.

    I see no direct connection.. a printer and the computer setup for internet are not related.
    But it sounds like the router in the wife's office is now in the wrong mode..
    If you have an existing main router replace the second router for a switch .. that is the easy way.
    Otherwise you need to bridge the router if it has that option.. most do not. Or use wan bypass.. where you turn off the dhcp server in the router and fix its ip to match the range of the main router.. this is the hassle of using router as a switch.
    BUT I am making a huge number of assumptions.
    What I need is the full network layout.. a quick picture would help.
    I need main modem.. main router.. (maybe same box or different).. make model and current IP address and how dhcp is setup.
    I need secondary router.. if that is what it is, IP and settings.
    I want the printer type and model. How it is connected.
    BTW I much prefer to see a network printer plugged into the network rather than usb.. it is only a matter of sorting the IP settings and driver pointing to the network rather than local.
    Or you should think of it as a broken washing machine and call the technician.. who could fix the whole lot in an hour.

Maybe you are looking for