Autopunch area of infinite length

Running Logic X on Yosemite.
Somehow (I don't know how) my autopunch area has become infinite in length, and since I can never get to the right locator, I can't adjust where to end autopunching.
If I click on the red bar, a pop-up comes up saying:
            Punch Range         1111
            Length                     ????? 1 0 63
Somehow the project had become some 20000 measures long. If I scroll horizontally all the way to the end of the project, I see that the autopunch area extends beyond it, and there seems no way to get to grab the right locator. I tried adjusting the length of the project, but that right locator remains elusive.
The online Logic X Help says:
Set the autopunch area by doing one of the following:
Drag the Punch In and Punch Out locators in the ruler.
Drag vertically in the autopunch locator fields in the control bar.
The first is not possible in the current state. The second isn't possible either, for there are no autopunch locator fields in the control bar, nor do I see a way to configure them - so it looks like the online help is in error here.
Any idea how to get out of this, or how I got in this mess in the first place?
   Thx, Michael

There are punch-locator fields in the Control Bar, unless you have disabled those. If so, control or rightclick in an unused grey area of the control bar and enable it:

Similar Messages

TS3195 I can upload photos and smaller size videos but when a video is 24 minutes long for instance, it doesn't upload at all from my iPhone to the PC. How do I upload these videos that are longer in length?

I can upload photos and smaller size videos but when a video is 24 minutes long for instance, it doesn't upload at all from my iPhone to the PC. How do I upload these videos that are longer in length?

Are you using any software to import videos? Did you tried Picasa or you just open your iPhone from My Computer?

Titles are automatically changing length and shortening - imovie '11 version 9.0.2

Titles are automatically changing length and shortening no matter what I do. I'm using imovie '11 version 9.0.2 I have tried everything and they keep reverting back to random sizes. I have several 4 sec still pictures and I want the titles to match in length so I make them the same size but as soon as I move away or do anything else the revert back to some random size like 2.2s or 1.2s. I don't know why but it is very frustrating.
Thanks in advance.

It's been a month now and I just installed the new update (9.0.4) and it is still doing this. I took a screenshot of what it is doing. I want all of the titles to be the same length as the pictures. They are all 3.9 or so seconds. I drag the titles so they are the same size and then as soon as I do anything else it automatically changes back to this. Any Ideas? I just don't know why it's doing this and it's really bothering me. Please help!

My songs in the musicplayer are having a length of 298 hours. How can I solve this problem?

My songs in the musicplayer are having a length of 298 hours. How can I solve this problem?

Is this the lenght for each of your songs or the total length for all songs in the player?

What is the viewable image area/screen size (length x width) on the 2014 21.5" and 27" imacs?

what is the viewable image area/screen size (length x width) on the 2014 21.5" and 27" imacs? i have an older 24" and am trying to determine if i need to go up or if 21.5" will be adequate. Thanks!

21.5 -
Height: 17.7 inches (45.0 cm)
Width: 20.8 inches (52.8 cm)
27 -
Height: 20.3 inches (51.60 cm)
Width: 25.6 inches (65.0 cm)
Ttake about an inch off for the lack border from each side and youll have an approximate.
http://www.apple.com/imac/specs/

Why are my region lengths changing?

Doing takes for a guitar solo yesterday, I had all my take folders on the same track. When I was doing my comping I noticed that some of the region lengths of takes further along in the song were changed. At first I thought I may have accidendally selected them all when I clicked on the track, but the same thing happened when I made sure I only had one take folder selected.
Is this a Logic 8 glitch, or am I doing something wrong?

Thanks for the added clarifications Noel. Can you perhaps explain to me how the behaviour of the color sampler in the info palette is actually desirable?
Let's look at my example again. When I am trying to make an adjustment and I'm looking at my color sampler targets, I _must_ have my adjustment layer selected. Target #1 is pointed over a white pixel. Regardless of which layer I have selected, that pixel is white. I can't imagine a scenario in which the readout should be anything other than 255,255,255. That's not a feature, that's a design mistake.
If I want to see, in the readout, the value of the background image's pixel, then I should hide the layer that contains that white shape. Then, that pixel is no longer white, and the color sampler readout should reflect that. Makes sense.
If you truly and honestly believe that users are interested in the color that is a result of compositing all the layers below (and including) the currently selected adjustment layer when they are plaing with the adjustment layer controls, then the UI must temporarily hide any layers above that color sampler as soon as I select the adjustment layer. This is the only correct UX design in that scenario - so that the color sampler once again reflects exactly what is "true" - namely the pixel color on the screen that it is sampling.
And if you re-read that last paragraph you will intuitively know that that would be crazy. I mean, there's no way that a user would want to have the UI hide any layers just because he's clicked on the Adjustment Layer - he probably wants to see the adjustment in the context of the entire composition. If he wanted to hide those other layers, he'd do it himself.
I urge you to reconsider this from the perspective of a real-world user and consider logging this as a bug. I just can't see any way that it isn't a mistake.

ITunes skips songs, when import to iPhone all songs are 2:34 length (they aren't)

So my iTunes and iPhone are completely FUBAR and I can't find any solution.
I have an iPhone 4s on version 7.0.4. I am currently using iTunes 11.2.1. Late 2011 Macbook Pro running 10.8.5, whichever cat that is.
Starting in December 2013, most new songs I import into iTunes will skip at random points in the song to the end of the song. There was no pattern as far as I could tell, though it didn't seem to be happening with music bought from iTunes. Music from CDs, bandcamp, etc. was the problem. For example, a song with a length of 5:55 would randomly skip to the end at 3:46. But, if I manually skipped to any point after 3:46 it would play the normally skipped part fine.This was not a huge problem as I could then import the songs to my iPhone and listen on there with no skipping.
In the past few weeks though, now every song I import to my iPhone cuts off at 2:34. Every single song. They skip in iTunes at a random point, then I import them to my phone where they skip at 2:34 (and are labelled as only 2:34 long), and then after being imported to my iPhone they skip at 2:34 in iTunes as well.
Last night, for absolutely no reason, about 80% of my music disappeared from my phone. It's still there, but can't be played for some reason. So I tryed syncing to my computer, but lo and behold, every song on my iPhone is now 2:34.
Please help, I'm very close to burning all of my devices in a fire and starting over.

I also have this problem, but on my 64-bit Windows 7 desktop. My income level no longer permits me to purchase Apple computers. Anything that I've bought off of the iTunes store, most of it's ten to six years old, will not play any further than 2:34. I just knew when I agreed to this "protected music" business I'd find myself a decade down the line staring at an expensive but unplayable music collection.

Only in FF, Not Mac OS folder windows, when scrolling arrows are held at length scrollbar keeps scrolling to the top or bottom of long web pages with no way to stop this action.

When ever I single click the up or down ARROWS on my Firefox browser windows, they respond just as they are set to in my Mac OS 10.4.10/System Preferences/Appearance menu. They Jump to few lines up or down the Browser Page. Smooth Scrolling is not checked On. But, even when it was checked On, this same anomaly is Repeatable.
- Holding either Arrow Button longer than a second or 2 will result in the page scrolling All The Way in the direction of the selected arrow.
The Arrow button that was selected stays highlighted until the scroll bar reaches its end.
This anomaly does not happen in any other Mac App on my computer. Each time I select and Hold either scroll Arrow Button on any other app. or any folder on my desktop, as soon as I release the button the scrolling action stops immediately.

You need to reset your default settings. This just happened to me recently!
Exit out of all fire fox programs the go to
Start>Run> (firefox -safe-mode)
a box will come up and press reset default settings
exclude the parenthesis when entering

Is Replica aware stubs are in infinite loop when fail over????

          Hi
          Any help on this Appreciated
          See in this senario, where there is four weblogic instance runs in the cluster
          and a replica aware stub(stateless bean with idempodent methods) finds a particular
          method fails on a server and it redircets the request to another one server but the
          same method fails on all the server, then what is goin to happen?? is it going to
          throw some exception or gonna be in a loop to keep on redirecting the method request
          to all servers in Round???
          Regards
          Aruna


          Aruna,
          A stateless session bean whose methods have been declared idempotent will automatically
          retry on another service provider in a fail-over situation. When a fail-over situation
          occurs, the stub refreshes its list of service providers. Note: Just because your
          method call fails, doesn't mean it's a fail-over situation.
          Jane
          "Aruna" <[email protected]> wrote:
          >
          >Hi
          >
          > Any help on this Appreciated
          >
          > See in this senario, where there is four weblogic instance runs in
          >the cluster
          >and a replica aware stub(stateless bean with idempodent methods) finds a
          >particular
          >method fails on a server and it redircets the request to another one server
          >but the
          >same method fails on all the server, then what is goin to happen?? is it
          >going to
          >throw some exception or gonna be in a loop to keep on redirecting the method
          >request
          >to all servers in Round???
          >
          >
          >Regards
          >Aruna

Exported files are the wrong length

I'm having a very troubling issue when exporting media from FCPX...
I am attempting to deliver broadcast master ProRes files of my completed project, but when I create a Master File its duration is one frame longer than the timeline. What's worse is that it seems to be duplicating a random frame within the sequence (I'm doing a split screen between the two and I can clearly see that one frame gets repeated). It doesn't happen in the same place the next time I try to export.
When I'm exporting an H.264 for client approval (using the Apple Devices 720p built-in preset) the resulting file is 4-5 frames shorter.
I'm running FCP X 10.1.1 on a 2012 iMac that's been fully updated to 10.9.2 and shows no further updates in the Mac App Store. The editor next door is using a new 2013 Mac Pro and is running into the same issue.
Bill

Double-click the TIFF image to load it into the Viewer window then click on the Motion tab. Open the Distort control and set the aspect ratio to 0 (or whatever it needs to display correctly).
-DH

How are units like Height, Length, Width, Volume, Weight utilized in SBO?

Dear Experts,
As per subject, how are the height, length, wieght...etc listed in the Item Master Data utilized in SBO? Can we see them in Inventory Audit Report? or any other reports??
Much Thanks in Advance for your response!
Warmest Regards,
Chinho

Hi
U can gt by query
SELECT T0.[BHeight1], T0.[BHeight2], T0.[BLen1Unit], T0.[BLen2Unit], T0.[BLength1], T0.[Blength2], T0.[SHeight1], T0.[SHeight2], T0.[SHght1Unit], T0.[SHght2Unit], T0.[SLen1Unit], T0.[SLen2Unit], T0.[SLength1], T0.[Slength2] FROM OITM T0 WHERE T0.[ItemName] = [%0]
or
Select * FROM OITM WHERE T0.[ItemName] = [%0]
Thanks
Kevin

How can I change the length of multiple lines at the same time?

This just seems like it should be a no-brainer, but obviously for me it isn't. I'm trying to change the length of multiple lines, that are at different angles, at the same time, in CS4. Basically, I design the face of dials used for airplane instrument gauges (like RPM, Torque, etc), and they have gradiation marks (lines) located all around, similar what a clock looks like with the hour and minute gradiation marks (lines). Is there a way to select all the lines, that I know are the same length, and change it to a different length, that's accurate to the 1/100th of an inch? It would just be like selecting multiple lines that have all the same stroke, then using the stroke box to change the stroke weight from .025in to .030in.
I've used the transform box to change the 'height' of a line before, but the line has to be at 90 degrees (straight up and down), and that won't work for the lines that are at, say, a 45 degree angle.
I hope i'm explaining this in a way that someone will understand. If not, I can sure try to clarify more, or insert the picture so you could see what i'm talking about.
Thanks for any help you can give!

OK, after fiddling around with everyone's ideas, I think I finally got it. I knew there had to be something with proportions between W and H, but couldn't figure out the math, until Jacob answered with:
"If each line must be strecthed from the inner/outer end, you may select each and use the Transform palette, choosing the right Reference Point, multiplying by the proportion in W or H (1.75/1.5), and Ctrl/Cmd clicking."
Now, I basically did everything above, (but I couldn't figure out what you were talking about with the Ctrl Clicking thing), except after figuring out the right proportion (which ends up being so small you guys would die if I told you the number; the numbers I gave earlier were just an example and much larger than what i'm really working with) I just clicked the little chain next to the W and H boxes to constrain the proportions. I then put the new number (multiplied proportion by whatever was in W) in the W box. The line lengthened perfectly toward the center of the dial, keeping the correct angle!
And Harron-Thanks for the link to Teri's, It is going to help with some things I do, but most of the dials I design don't have equal distances between each gradiation mark, and the blueprints I work off of usually have exactly what distances that the grad. marks are supposed to be. So, after selecting one of my grad marks that is already at it's correct place, I then use the rotate tool and Alt-Clicking the very center of the dial, I can then put in exactly what distance I want the next grad. mark to be at, I hit copy (instead of OK) and there will be a new grad. mark exactly the correct distance from my original. Then if I want to have the 3rd grad. mark I just hit Ctrl-D and it will copy another mark to the next position. I don't know if you necessarily wanted to know all that, but i thought i'd explain why I like doing it that way.
A BIG thanks to everyone! I'm really a AI newbie and am the only one at my company that knows how to use it, so I don't have anyone close to ask stupid questions to. So I appreciate all your help!

Invalid key length on hard drive. Can this be fixed?

Hello,
I have a question about an error I am receiving with a hard drive I have been using for a few months on an imac G3 (the slot loading version). I bought this used 80 GIG hard drive on ebay for a friend of mine and I helped him transfer all his data from his older 9 GIG drive to this newer 80 GIG drive that I bought for him on ebay. I simply cloned the 9 GIG drive onto the new drive using Carbon Copy Cloner. There is not a lot of data on the drive - only about 3 GIGs of data.
The drive is the only drive in the computer (an imac G3) and therefore it is the startup drive. The operating system on the drive is OS9. All was working fine for a few months until just last week. Now I am receiving this following error:
error message:
The disk "Macintosh HD" appears to be damaged. Use a disk repair utility to repair the disk.
And so I used the disk utility built into OS9 to see if I could repair the problem. (I think OS9's disk utility is called "Disk First Aid")
When using OS9s disk utility (I think it is called "Disk First Aid") the following report is issued:
Problem: Invalid key length, 4,943
Test done. Problems were found but Disk First Aid cannot repair them.
My questions are:
What is an "Invalid key length"?
How serious is this?
What would cause this?
Could this have been caused by the physical condition of the disk or possibly by the software on the disk?
Would re-formatting the drive fix it? (Of course I would try to save any data first onto another disk)
Or is it risky to continue to use this disk even after reformatting it?
I guess I have a lot of questions here and if anyone could make any suggestions or comment on why "Invalid key length" errors happen I would really appreciate it. Thanks:)
Here are some details:
When I bought the 80 GIG hard drive from ebay the first steps I took were to format the drive using OS9's "drive setup", load the OS9 drivers and then I verifed the disk. The disk seemed to be fine. Then I cloned his old drive onto this 80 GIG drive using Corbon Copy Cloner. I was sure the 80 GIG drive was in a healthy state at that time and I trusted it enough to give it to my friend for his startup drive. Now that the drive has failed with his data and programs, I feel pretty bad. How could this "Invalid key length" error occur?
Should I go back to the person who sold me the drive on ebay and ask for a refund? Or are "Invalid key length" errors a common occurance with hard drives that should just be accepted? Or might it possibly be the contents (data) on my friend's disk that caused this error.
It has been suggested to me to use "Tech Tools Pro" or "Disk Warrior" to repair the disk. Hopefully that might repair the disk. Unfortunately these programs are too expensive for this purpose because they would cost more than the computer actually costs (its an old imac G3 computer). I found a service that would run Disk Warrior on the disk to repair it for a $50 fee. Still, that is also not worth it as the computer may not even be worth $50.
Here are some specifications:
80 GIG drive specs: SEAGATE BARRACUDA 7200.7 80GB hard drive
computer: imac G3 (slot loading version)
OS: Mac OS9
Thank you for any suggestions especially as to whether I should attempt to return the hard drive or look for a refund for this hard drive or attempt to reformat the drive and try again (backing up the data first).
I also question the source of all the data on my friends computer. If he had the original operating system disks (which he said didn't come with his computer when he purchased it second-hand), I could have easily re-installed the OS and the applications. But he doesn't have any disks. That serves me right for having to deal with trying to help out someone who has software from a questionable source. I'm never doing that again. I guess that makes me guilty too as an accomplice. I don't feel very good about this
I didn't know for sure - but I guess I should have assumed his software was illegal if he didn't have the disks - I was afraid to ask. I'm never putting myself in this possibly illegal situation again. Never again will I try to help someone out who doesn't clearly have the legal disks. Please forgive me and everyone else who reads this post. I feel shameful about this but somehow I must get myself out of this problem. I've learned a good lesson. Should I attempt to fix his computer? Or should I tell him to first buy a legal OS and software before I can help him out? You see I feel further guilt because I was the one who gave him the 80 GIG problematic hard drive that failed and I feel I should have to fix it. Can anyone offer me a bit of advice? What do I do?
What's the right thing to do?

Thank you Jim and Apple2Freak,
I appreciate your comments. I am now suggesting to my friend to buy a legal OS and if that is the case I am suggesting to him to move to OSX instead of OS9. Luckily he let me know there wasn't much data on that drive that he needed to save. I am still trying to determine if I could still use this hard drive with the keylength errors if I erase it or if the hard drive has permanent damage. I am hoping that I could install OSX on it and erase the hard drive to start again.
This imac (slot loading version) can support up to OS 10.3.9 however I might consider Xpostfacto to try to run 10.4. But then I would need to buy 10.3.9 as well as 10.4 and that would double my OS cost. I think I might just look for OS 10.3.9 only. Its not worth it for me to buy two OSes for it.
Jim, your post was very interesting because it also pointed out that it could be an issue of bad RAM. A few months ago we installed some new second-hand RAM and I wonder if that is the cause of all these problems. I will have to check that first.
Thanks again!

File content conversion for receiver file structure(fixed length)

Hi Experts,
I am tryinng reciver file FCC for the following strcuture. it seems I have done some wrong configuration,and failing at conversion level. so experts please help me to get the correct content conversion parameters.
note : ( * Nothing can be altered at repository side * ) and the fields are fixed in length so the file needs to be fixed lentgh format.
Tree--Occ--
TYPE
SBLSALDATA--1..1--
SBLSALDATA
SALDATA----
1..1
Headrec----
1..1
XXX----
1..1
XXX----
1..1
XXX----
1..1
TotalDatarec----
1..Unbounded
YYY----
1..1
YYY----
1..1
YYY----
1..1
YYY----
1..1
LASTREC----
1..1
ZZZ----
1..1
ZZZ----
1..1
Thanks in advance.

I have done in the same procedure as in above link. its not working either.
My receiver structure looks like below.
<?xml version="1.0" encoding="UTF-8"?>
<ns1:TaxData xmlns:ns1="urn:XXXXXXXX">
<EmpTaxDat>
<Header>
   <A/>
   <B/>
   <c/>
</Header>
<Detail>
   <D/>
   <e/>
   <f/>
</Detail>
<Trail>
   <g/>
   <h/>
   <i/>
</Trail>
</EmpTaxDat>
</ns1:TaxData>
Edited by: Harish.k on Jan 2, 2010 2:15 PM

What are the right content conversion parameter in this receiver ?

Hi experts,
Can someone help me with setting right Content conversion parameter in the Receiver of File adpater(FCC).The output file must be fixed length text file.
Here is the receiver structure:
<Recordset>
    <Header>
       <f1>01</f1>
       <f2> </f2>
       <f3> </f3>
    </Header>
     <Body>
        <SubBody1>
              <field1 />
              <field2 />
              <field3 />
              <field4 />
              <field5 />
        </SubBody1>
         <SubBody2>
              <field6 />
              <field7 />
              <field8 />
              <field9 />
              <field10/>
        </SubBody2>
     </Body>
    <Trailer>
        <f1>03</f1>
        <f2> </f2>
        <f3> </f3>
   </Trailer>
</Recordset>
Also Body can occure multiple times in the file but still will have this structure...Header and Trailer can occure only once in file.
What are the right content conversion perameters in this case?
Appreciate your help asap!T
Thanks
Jon

<Recordset>
    <Header>
       <f1>01</f1>
       <f2> </f2>
       <f3> </f3>
    </Header>
     <Body>
         <SubBody>
              <field1 />
              <field2 />
          </SubBody>
          <SubBody>
              <field1 />
              <field2 />
          </SubBody>
          <SubBody>
              <field1 />
              <field2 />
          </SubBody>
        </Body>
    <Trailer>
        <f1>03</f1>
        <f2> </f2>
        <f3> </f3>
   </Trailer>
</Recordset>
if this is the input structure then FCC goes like this ....
Recordset:Header,Body,SubBody,Trailer
Header.fieldFixedLengths 10,20,30.. (based on you are structure fixed lengths)
Header.endSeparator - 'nl'
SubBody.fieldFixedLengths 10,20,20 (based on you are structure fixed lengths)
Body.endSeparator - 'nl'
Trailer.fieldFixedLengths 10,20,30.(based on you are structure fixed lengths)
Trailer.endSeparator - 'nl'
We might have to try out SubBody.endSeparator - 'nl' if Body.endSeparator - 'nl' does not insert a new line after each body record.
Cheer's

Autopunch area of infinite length

Similar Messages

Maybe you are looking for