Autoquery portlet doesn't see sub-Perspectives
I have an autoquery portlet that is going after items that have been assigned a sub-perspective (Application/Gemini).
When configuring the search criteria I can search on perspective, and using the popup I can select the appropriate sub-perspective, but the search doesn't find the item. It returns blank.
I've tried:
- Flushing the cache for the page
- Checking and unchecking the "sub-perspective" check box on the criteria row.
Any ideas?
How long after you created the item were you searching for it?
If you are searching using Oracle Text (see global Search
Settings), then you must either manually sync the indexes after creating/editing items or wait for the job to run.
It is possible in this case that you created the item (or assigned the persp to the item) and then searched for the item immediately before syncing the indexes and when you tried later the indexes could have been synced from the job which runs periodically.
Similar Messages
-
Shuffle On Desktop/Updater doesn't see iPod
My iPod Shuffle shows up on the desktop. The amber recharge light is blinking. When iTunes opens, I get the following message: "iTunes has detected a software update for the iPod. Would you like to install it now?" When I click "Okay", the updater opens and I get the following message: "An unexpected error occurred". When I click "okay", the updater now tells me to plug in an iPod to update it. My iPod is plugged in and charging, and is on the desktop. When I quit the updater, my iPod does not appear in the iTunes source list.
I then quit and reopened iTunes. This time when prompted regarding the software update, I click cancel. iTunes now opens with my iPod listed in the Source list. However, when I go to add songs to the iPod I get the following message: "Some of the songs in the iTunes music library were not copied to the iPod because your iPod software is too old. Go to www.apple.com/ipod to get the latest iPod software update."
I've reinstalled the updater 3 times now. I got the same results as described above each time. The updater doesn't see the iPod. What is the "unexpected error"? Why doesn't the Updater see the iPod?
Thanks for any help.I just downloaded the latest updater version, plugged in my iPod Shuffle, and sat in wide eyed amazement as it actually recognized that the iPod was, in fact, plugged into the computer!!!
I held my breath while the updater did it's thing... could this actually be it? Could I finally join the army of gleeful millions, listening to my favorite tunes and newscasts while jogging? Would the wonderful little gift I got for Christmas finally - gulp! - work?
Alas, no. Just as the updater was finishing up I got the following glass if ice water in my face:
"An error occurred updating or restoring iPod. Disconnect iPod, reconnect and then try restoring again. If that does not work, go to http://www.apple.com/support/ipod"
I did that, and noticed that "restoring" was not an option, as the "restore" button wasn't active. Ah well... my iPod shuffle goes back into it's neat little packaging, and back onto the shelf while I await the next round of potential solutions to slowly work their way down to the Discussions Sub-basement.
I swear to God, I will not give up on this. I know it can work. Someday, someday...
Gee -
Can't connect my ipod toch to itunes!!! It doesn't see it! I use windows 8, don't know if that's the problem. Anyways, my ipod is stuck! Every time I open it, it stays stuck with the image of a USB cable with an arrow pointing towards an itunes icon. but whatever I do, my computer doesn't see it, and neither does itunes. What to do???!!!
The the remaining items of the following, you may have to let the battery fully drain.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
PSE 12 for Mac doesn't see my scanner
PSE12 for Mac refused to work with my scanner. In preferences I checked "Additional Plug-Ins Folder" and selected the Optional Plug-Ins Folder which contains the TWAIN.plugin. I restarted the PSE and the File> Import... command remains dimmed out. Tried resstarting the iMac and PSE still doesn't see the scanner. PSE 11 used to recognize the scanner right away. I hope this isn't a permanent change in PSE 12!
Thanks for any help!
OS X 10.8.5
Canon 8800F Scanner
TWAIN.plugin v12.0.4x001Hi Barbara - I reinstalled PSE 11 on my iMac and verified that it still works with the Canon 8800F scanner. I also installed PSE 12 on my Macbook Air, moved the Twain plug into the right spot, and found that it doesn't see the scanner either. Preview on the Macbook does see the scanner OK so it's not a connection problem there either.
I noticed that the Twain plugins in PSE 11 and 12 are the same version but different sizes. The get info windows for the two versions of PSE on the iMac (Kahawalu) and the PSE 12 on the Airbook (Niumalu) are below. Would you be able to let me know the PSE 12 Twain file version and file size that is working with your Canon scanner? It might help narrow this thing down.
Thanks again for your assistance! William -
I have prepared an 82 page book on iPhoto, ready to buy. There is a message over about half the photos saying "drag photo to place in background" as if it doesn't see the photo already there. I have spent over 20 hours getting to this point and can't bear to start over! Its a Mac 08X 10.6.8 and iPhoto 08 7.1.5. I have made other iBooks on this software and computer with no problems. Help please!
Look for a page that has a similar layout:
The one photo per page layout is the easiest to miss. Just click on a background color to remove the problem.
OT -
So I just migrated from a 10.7.5 iMac 27" from 2009 to 10.9.4 on a 2013 27" iMac with Fusion Drive.
I don't use Time Machine. There are no backups involved here.
Used Ethernet. Only took 20 hours... (BTW, it stayed on "less than 1 minute left" for like 12 hours but luckily I was away and just left it going in hopes it would work... and it did!)
Anyway, back on my OLD iMac, I kept all of my songs on an external drive because my internal drive was too small. So iTunes looked at that drive for the music it was playing. I turned that drive off, even disconnected it, during the migration process because I thought it was confusing it during the first attempt which took 10 hours and nothing happened.
So now it worked, finally. On my new iMac, running Mavericks, I now have two user accounts... the one that was set up when I started the computer the first time, and the new one that transferred over via Migration Assistant. No problem. I can live with that. The only thing is, I would still think the old XML files and library stuff would migrate over... but iTunes doesn't see it. When I open up iTunes, in *either* account, iTunes behaves as if it's brand new. Repeat: the old and new account on the new iMac, both, do not see an old iTunes library which IS on the old iMac. Only the music is on the external drive from what I understand.
I've done this before so I know it's possible. I remember upgrading a long time ago and got iTunes to see my old library... even though some of the music was no longer there. It just puts "!" marks wherever there is no link. I was hoping that that's what I would find when I launched iTunes, but no luck. Even connecting the old hard drive to the new Mac (via USB) doesn't make iTunes all of a sudden "see" the old library. That data doesn't seem to be there. It didn't transfer over. Did it not transfer over because the songs weren't on the internal volume? Should I have left my external hard drive on?
So.... now that I've spent almost 3 days total trying to get this to work, and everything is running... I don't want to have to start over in order to get iTunes to work. Is there a way I can just drag over some XML files or something from the old computer? I don't want to lose all of the ratings and personal notes and everything.
I should add also that I have like only four songs I've ever actually bought through iTunes. I'm still a bit old fashioned and buy CDs and rip them to Apple Lossless. So I hope it's not an authorization / reauthorization issue because I have like 1400 albums ripped.
Thanks in advance for any help.
--JeffiTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one. -
ITunes 9.2.1 doesn't see my iPhone 3G 4.0 on Windows 7 x64
Hi everyone. I'm running Windows 7 x64 and have been having this problem since I updated my iTunes to 9.2. The problem is I plug my phone in, and iTunes doesn't see it. After plugging it in, iTunes seems to struggle a bit, lags, before finally running smoothly again. The phone doesn't appear in iTunes, though my computer detects it and I can browse the photos like I always could. Any help is appreciated!
yup same here
its a crapshoot, sometimes it happens other times it does not
only way round this i found is to do this:
reboot windows
and reboot iphone
eventually they will see each other.
what causes it? poorly coded itunes for windows, who knows.
but its something i've had for many versions now, 9.2.1 is nothing new. but it does seem to happen more now. -
Itunes 10.6 doesn't see my ipad, ipod, or iphone
I reinstalled 10.6 and it worked once and now it doesn't see them again.I rebooted and it still doesn't recognize my iPad. I googled this question and this problem seems common but I haven't heard of one permanent solution. I am about to lose MobileMe, so the only way I will be able to sync is through itunes. Please tell me there is a solution. Thanks.
Do they have airdrop enabled?
-
ITunes doesn't see PSE7 images
I had Photoshop Elements 8 installed, and iTunes could see those photos just fine. But then my trial expired, so I had to uninstall and use PSE7. The problem is that iTunes no longer sees my PSE7 catalog and instead sees the PSE8 catalog as it was before it was uninstalled. I managed to track down where iTunes apparantly copied the PSE8 catalog and deleted it, but now iTunes doesn't see any PSE catalogs at all.
Of course there is the option to sync with individual folders, but I'd rather not do that since PSE keeps them nice and organized, and iPod Touch doesn't show the folders within subfolders of the selected folder for photo syncing. So, how can I get iTunes to pick up my PSE7 catalog again?I had something similar (if not the same) happen. I was going to transfer some new shows from iTunes on my laptop into my iPod. The msg I get from iTunes: "iTunes cannot read the contents of the iPod "(iPod'S name)". Use the iPod Software Updater application to restore the iPod to factory settings." The best part....my iPod's empty! I don't know what happened but I tried to connect it to my work PC and it read the same. I can reload my iPod with songs/shows. That's not an issue BUT I'd like to know what may have caused this and how do I know it won't happen again?
PC Windows XP -
Updated to Itunes 7.0.1, doesn't see my ipod via USB1.1!!
Hi
My itunes/ipod were running fine under USB 1.1 (older computer) until I updated to 7.0.1 - now itunes doesn't see my ipod!! The iPod shows up in device manager, though, and my machine even mapped a drive to it when iTunes timed out (I removed that).
Everything was fine until I updated. sigh.
I found an Apple page that said they don't "support' USB 1.1 - could it be that iTunes 7.0.1 just doesn't?
thanks in advance for any help!
Brianyup same here
its a crapshoot, sometimes it happens other times it does not
only way round this i found is to do this:
reboot windows
and reboot iphone
eventually they will see each other.
what causes it? poorly coded itunes for windows, who knows.
but its something i've had for many versions now, 9.2.1 is nothing new. but it does seem to happen more now. -
my new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7. iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.
If your computer doesn't see the phone when you plug it in, you may have to take it to an Apple Store.
-
Frozen in "Do Not Disconnect" iTunes doesn't see iPod
I have never had one bit of trouble with my iPod until today. I plugged it in, the Do Not Disconnect comes up, the clock is frozen, no charging happening and iTunes doesn't see the iPod. I tried the "restart" and nothing is working. What do I do?
I haven't upgraded to iTunes 8.1 yet, would that help?
HELP!OK, so I tried the Reset again. Still didn't work. THEN I saw this:
Tip:
+If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.+
Tried it again and now it's all better. -
I have a new iphone 5 and although I had a little trouble downloading all my apps and music, I did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can Anyone help?
Hey leafxxx,
Thanks for the question, and welcome to Apple Support Communities.
The following resource provides troubleshooting steps if your iPhone is not displayed in iTunes when connected:
Apple - Support - iPhone - iTunes Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/itunes/
For more detailed instructions, see this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Enjoy your new iPhone 5!
Matt M. -
XP/Pro box doesn't see other computers on network after running CiscoConnect on it
Got a new E4200 on September 13 to provide internet and networking to a small business network.
There are 2 wired computers, one an XP/pro and the other a Win 7/64 bit. Both worked straight out of the box in that both had access to each others' files after plugging them into the E4200. Two other wireless computers were connected using CiscoConnect, one a Vista and the other a Win 7, and all was fine. All computers were able to see each others' file. Also managed to get a wireless Canon printer working even though CiscoConnect wasn't able to find it.
After I realized I didn't run CiscoConnect on the XP, I did so using the USB key created on the Win7 box and the result was that the XP box doesn't see any of the other computers although all the other computers can see the XP files. After uninstalling CiscoConnect on the XP and rebooting, the XP can't access the other computer files but it can still access the internet and the wireless Canon printer that CiscoConnect can't find. Rebooting or powering off/on the router didn't change this state.
Would appreciate any ideas in getting the XP back into the network.
Firmware Version:
1.0.02 build 13 May 24, 2011Update on above problem:
Performed a System Restore on the XP and partial networking functionality was restored. The XP box now sees the Vista and the XP Explorer can see all computers under the Workgroup. Probing the Win 7 computers from XP's explorer the XP returns the following: message
\\Win7a is not accessible. You might not have permission to use this network resourc. Contact the a...
This message doesn't mean much to me as I have limited networking experience but somebody here might understand this clue. -
Macbook Pro: Disk Utility doesn't see my HD
Hi guys,
My Macbook Pro has been running slower lately, but I honestly didn't think too much about it...until today. It's just over a year old, running Mac OS X, and I mostly use Safari as my browser, but I have to use Firefox for my online classes. Today, Firefox froze up and quit responding, so I Force Quit it. A few minutes after this, Safari did the same thing, and then it was my entire desktop. Nothing was responding; I had to shut down by pushing the power button.
And then, it wouldn't turn back on. The chime sounded, the apple appeared, and the spinning circle underneath it. And it spun, and spun...until a generic "stop" symbol replaced the apple logo. I immediately shut it back down and did an online search. I followed every fix recommended for this issue. I tried reseting the PRAM, and then the SMC, and still the same thing happened. I tried to boot in Safe Mode, and if seemed to be working...right up until an hour passed and nothing new was happening. I shut it down again, and tried booting from the install disc of Snow Leopard. That worked, and I tried to do Disk Utility with the intention of following the online apple directive of running first aid on my HD. Except Disk Utility doesn't see my HD, only the boot disc and DVD drive. I'm guessing this is a bad sign. I tried calling Apple Care, but they are closed right now. I will call them in the morning, but in the meantime, I thought I'd see if anyone here had any advice I haven't already tried. Sadly, I haven't run Time Machine in...months. I'll end up losing a lot of stuff because I just didn't do that if my HD is toast.
Any suggestions?Sure seems to be a failed(ing) hard drive. If you happen to get it into safe mode again, the ONLY thing you should immediately do is copy off your Home folder to an external USB disk, SD card, something. Then just get it to an Apple store for check.
Try to copy your files off first and don't try anything else to get at that disk until you copy your home folder. If the disk is failing and you're trying to do things to it you'll loose the chance to get that data.
Maybe you are looking for
-
Is it possible to separate administration port from application port ?
Hello, I would like to know if its possible to specify a different port to access the Apex administration and a different one for the application. Default APEX port : 80 At present, we have for example : Administration page : <server address>/apex/f?
-
How to use online Files with LCCS FileManager
Hi, I'm discovering LCCS and the FileManager. I would like to use images already uploaded on my server with the FileManager. But i'm don't sure if i have to use "download" or "upload" methods to do it. I don't want to use the "browse()" method, the f
-
Manipulate the .swf's html file.
I have an html file with a list of clickable files to open. When opened, that html file has my .swf embedded but it does not open full-screen, can I program it to? Also, is there code that will take away the IE menu bar, etc. I am created the html fi
-
Hi people, I know that are a stupid question, but here I go. Anayone can help how to create a new blog in Owc Wiki? I can just create new Wiki Pages. There's a blog created when I create a new domain, I would like delete this and create new blogs. I'
-
Videos do not run smoothly but audio does and I get a scripts message
When I try to watch a video from a certain site it is jumpy and does not run smoothly although the audio does. I get a message about scripts but so not know what to do.