[AUTOSCALE FAILED] - Autoscale task failed for INSERT_CLOUD_SERVICE_NAME due to no metrics available

Receiving multiple "Autoscale Failed due to no metrics available" errors on all of our cloud services. Looks like Azure cpu monitoring stopped around 8am EST this morning on all of our cloud services . Tried restarting my cloud
services but no help. Obviously a backend issue in Azure...Microsoft, can help me out and look into this?

Hi,
Azure status (http://azure.microsoft.com/en-us/status/#history) have issues report now, below is the detailed information.
Cloud Services - Multiple Regions - Partial Performance Degradation
1 hr 14 mins ago
As early as 1 August, 2014, some customers in North Central US, East US, Japan East, Japan West, and Brazil South may have been experiencing issues with their Auto-Scale implementations. Errors may include messages regarding the inability to read Auto-Scale
metrics data. We have identified a potential root cause, and are working on an extended recovery plan. An update will be provided within 6 hours, or as events warrant.
Please try again after this incident mitigate, sorry for any inconvenience.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

[AUTOSCALE FAILED] - Autoscale task failed for [domain] due to no metrics available

Hi,
AutoScale on my cloud service is not working due to no monitoring metrics avaiable.
I set the AutoScale scale by CPU metric.
For the Monitoring, I use Minimal Monitoring.
and from the Monitoring tab there's one metric of CPU percentage.
The strange things, I can see the graph if 24hours but the graph only reach 5 hours behind.
so.. If I change the monitoring to hourly, the monitoring graph display nothing.
I have tried to delete the autocale, delete the metrics and recreate them.
Please advise.

Hi,
From my experience, this may be azure server issue. It may be fixed some time later. You can try it again now to see if it works. You also can try to stop the cloud service then restart again (click cloud service>> click dashboard >> click restart).
Hope this helps. if this didn't give you help, please feel free to let me know.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT201250 My time machine keeps failing to backup due to space not available.

I have a 500 gb external that I use for backups, but for some reason there is only 208gb available for backup. When I open up my time machine, I have deleted all of my old backups. For some reason, I can not get at the other available space. Everytime I open up time machine, there is nothing there now. I don't know how to access the other space. Where did the other space go & how do I get it back?
I did recently take this machine in to have a new hard drive installed & they used the time machine to back up all of my files. Now I don't know how to access that other space. Any thoughts?

I'm not certain that I fully understand you situation.
I surmise that you have deleted all of the files from the external HDD that you use for Time Machine. If that is the case, I would I would erase and reformat the Time Machine Disk in Disk Utility and reinstall it as your Time Machine disk.
Ciao.

Error Msg: SQL login failed for HOSTNAME? Upgrade task?

Hi everybody,
Since some weeks we see an error message in all servers our SharePoint 2010 SP1 Farm, regulary every hour:
SQL database login for 'SharePoint_Config' on instance 'sqlsrv' failed.
Additional error information from SQL Server is included below.
Login failed for user 'OURDOMAIN\SERVERNAME$'.
The interesting part is that the
server tries to connect to the SharePoint Config database, not a dedicated account, which is normally used for every SharePoint service.
What circumstances can lead to an access of a server?
Unfortunately I get no details of the service or application which is trying to access. The event log just states "SharePoint Foundation (Microsoft-SharePoint Products-SharePoint
Foundation)" , Task Category "Database". The user who raises the error is "SYSTEM".
In the ULS log I can find the Stack Trace below which indicates to an upgrade task. But why is the SYSTEM user trying an update? Normally we do an upgrade by running the Upgrade Wizard with an dedicated account. And only the SharePoint Administration
windows service runs as Local System.
And I never heard or read something like: Give Local System (so the server) access to the SharePoint Config database?!
Thanks for your ideas :-)
Benjamin
System.Data.SqlClient.SqlException: Login failed for user 'DOMAIN\SERVERNAME$'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SharePoint.Utilities.SqlSession.OpenConnection()
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock)
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, Boolean retryForDeadLock)
at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command)
at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.GetVersion(SPDatabase database, Guid id, Version defaultVersion, SqlSession session, SPDatabaseSequence sequence)
at Microsoft.SharePoint.Upgrade.SPDatabaseWssSequence.get_BuildVersion()
at Microsoft.SharePoint.Upgrade.SPSequence.get_CanUpgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CanUpgrade(Object o)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.get_CanUpgrade()
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveCanUpgrade(Object o)
at Microsoft.SharePoint.Upgrade.SPUpgradeSession.NeedsUpgrade(Object o, Boolean bRecurse)
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.get_NeedsUpgrade()
at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.ValidateBackwardsCompatibility()
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Initialize(SqlConnectionStringBuilder connectionString, Boolean enableCaching, Boolean checkCompatibility, Boolean bindRequestGuid)
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Initialize(SqlConnectionStringBuilder connectionString, Boolean enableCaching, Boolean checkCompatibility)
at Microsoft.SharePoint.Administration.SPConfigurationDatabase.get_Local()
at Microsoft.SharePoint.Administration.SPFarm.FindLocal(SPFarm& farm, Boolean& isJoined)
at Microsoft.SharePoint.Administration.SPWebService.get_ContentService()
at Microsoft.SharePoint.PowerShell.SPCmdletSnapIn.get_Cmdlets()
at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.MergeCustomPSSnapIn(PSSnapInInfo mshsnapinInfo, CustomPSSnapIn customPSSnapIn)
at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.LoadCustomPSSnapIn(PSSnapInInfo mshsnapinInfo)
at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.LoadPSSnapIn(PSSnapInInfo mshsnapinInfo)
at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.LoadPSSnapIn(PSSnapInInfo mshsnapinInfo, PSSnapInException& warning)
at System.Management.Automation.Runspaces.RunspaceConfigForSingleShell.DoAddPSSnapIn(String name, PSSnapInException& warning)
at Microsoft.PowerShell.Commands.AddPSSnapinCommand.AddPSSnapIns(Collection`1 snapInList)
at Microsoft.PowerShell.Commands.AddPSSnapinCommand.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
at System.Management.Automation.CommandProcessorBase.DoExecute()
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
at System.Management.Automation.PipelineNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.ifStatementNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.ParseTreeNode.Execute(Array input, Pipe outputPipe, ExecutionContext context)
at System.Management.Automation.ScriptCommandProcessor.ExecuteWithCatch(ParseTreeNode ptn, Array inputToProcess)
at System.Management.Automation.ScriptCommandProcessor.RunClause(ParseTreeNode clause, Object dollarUnderbar, Object inputToProcess)
at System.Management.Automation.CommandProcessorBase.DoComplete()
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
at System.Management.Automation.PipelineNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.ParseTreeNode.Execute(Array input, Pipe outputPipe, ExecutionContext context)
at System.Management.Automation.ScriptCommandProcessor.ExecuteWithCatch(ParseTreeNode ptn, Array inputToProcess)
at System.Management.Automation.ScriptCommandProcessor.RunClause(ParseTreeNode clause, Object dollarUnderbar, Object inputToProcess)
at System.Management.Automation.CommandProcessorBase.DoComplete()
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper()
at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc()
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()

http://aanuwizard.com/2010/04/30/login-failed-for-user-domainservername/
It will need to add user ‘NT AUTHORITY\NETWORK SERVICE’
to your database to get rid of this problem.
An asp.net application is running under NT AUTHORITY\NETWORK SERVICE account.
http://stackoverflow.com/questions/2806438/login-failed-for-user-domain-machinename
NETWORK SERVICE and LocalSystem will authenticate themselves always as the correpsonding account locally (builtin\network service and builtin\system) but both will authenticate as the machine account remotely.
If you see a failure like Login failed for user 'DOMAIN\MACHINENAME$' it means that a process running as NETWORK SERVICE or as LocalSystem has accessed a remote resource, has authenticated itself as the machine account and was denied authorization.
Typical example would be an ASP application running in an app pool set to use NETWORK SERVICE credential and connecting to a remote SQL Server: the app pool will authenticate as the
machine running the app pool, and is this machine account that needs to be granted access.
When access is denied to a machine account, then access must be granted to the machine account. If the server refuses to login 'DOMAIN\MACHINE$', then you must grant login rights to 'DOMAIN\MACHINE$' not to NETWORK SERVICE. Granting access to NETWORK SERVICE
would allow a local process running as NETWORK SERVICE to connect, not a remote one, since the remote one will authenticate as, you guessed, DOMAIN\MACHINE$.
If you expect the asp application to connect to the remote SQL Server as a SQL login and you get exceptions about DOMAIN\MACHINE$ it means you use Integrated Security in the connection string. If this is unexpected, it means you screwed up the connection
strings you use.
If this helped you resolve your issue, please mark it Answered

After effects warning: Audio conforming failed for the following file:___________.cfa. Perhaps due t

After effects warning: Audio conforming failed for thefollowing file:___________.cfa. Perhaps due to disk space.
I am working on a project for an internship and I am editing a video I had the video files working and then I started doing some editing and animations for the video and now for some reason when I open the file into AE I get this message so I tried starting over same message when I import the video files.

I had this problem after converting some MPG's to avi's... the resulting filenames were 'foo.MPG.avi' ... the error message only seemed to indicate it was foo.MPG, so AE thought it was a MPG container type by parsing wrong, when it wasnt. i renamed all my files to just the avi, like 'foo.avi' and then imported into AE and it worked, no errors.

DB13 error for CHECKDB task - BR0252E Function _stat() failed for 'D:\oracl

Hi
while trying to execute CHECKDB in Db13 i was getting the following error message
My Operating system is windows 2003 database oracle 10g
already referred to notes 952080, 134592 and subsequent notes
E:\ORACLE\NPE\ORIGLOGA\CNTRL\CNTRLNPE.DBF       26066944            4 FILE NOLINK
E:\ORACLE\NPE\ORIGLOGB\CNTRL\CNTRLNPE.DBF       26066944            4 FILE NOLINK
D:\ORACLE\NPE\SAPDATA1\CNTRL\CNTRLNPE.DBF       26066944            3 FILE NOLINK
BR0982I Database disk volumes
Directory / Raw disk                          Device      Total[KB]      Free[KB]    Used[%]   MaxNeed[KB]   MaxMiss[KB]
BR0252E Function _stat() failed for 'D:\oracle\EO1\102' at location BrDiskStatGet-1
BR0253E errno 2: No such file or directory
BR0277E Determination of disk volume status for D:\oracle\EO1\102 failed
BR0806I End of BRCONNECT processing: ceadprqb.chk 2009-03-17 18.06.25
BR0280I BRCONNECT time stamp: 2009-03-17 18.06.25
BR0804I BRCONNECT terminated with errors
if any faced simlar problem, please give let me know if you have a solution.
Regards
HM

Hello,
this type of error happens when there are permission problems. Check permission of BRtools
Check the permission of files..Check the link below for more information :
http://www-01.ibm.com/support/docview.wss?rs=667&context=SSZHVN&dc=DB560&dc=DB520&uid=swg21327498&loc=en_US&cs=UTF-8&lang=en&rss=ct667tivoli
Thanks
Anju

The package failed to load due to error 0xC0011008

I am trying to run a SSIS Package from SQL Server BI Studio. I receive the error "The package failed to load due to error 0xC0011008". SQL Server 2008 R2 installed (32bit Win 7), along with Integration Services. The Package connects
to a SQL Server DB.
Here is the full error taken from consol in BI Studio:
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" starting.
Error: 0x1 at ST_Gen_Pkg_Src_SqlServ: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008
"Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
---> System.Runtime.InteropServices.COMException (0xC0011008): The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was
passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
   at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.LoadPackage(String FileName, Boolean loadNeutral, IDTSEvents100 pEvents)
   at Microsoft.SqlServer.Dts.Runtime.Application.LoadPackage(String fileName, IDTSEvents events, Boolean loadNeutral)
   --- End of inner exception stack trace ---
   at ST_0f39f89613ca43e9a6660953aa72fa2c.csproj.ScriptMain.Main()
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig,       MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
   at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
Task failed: ST_Gen_Pkg_Src_SqlServ
Warning: 0x80019002 at CreateDynSSIS_DB_RunDynSSiSDB: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" finished: Failure.
The error is thrown at this line:
DynamicPackage = app.LoadPackage(DynamicPackagePath, null);
Any help would be great! I've done a bit of Googling on the topic already.. and nothing has worked so far.

Hi,
Reason for the error: Old
version of the DTEXEC is picked up by SQL Server instead of the new one.
Refer this link for more info
THE PACKAGE FAILED TO LOAD DUE TO ERROR 0XC0011008
Hope this info Helps

DPM failing SQL backups due to error: "the SQL Server instance refused a connection to the protection agent. (ID 30172 Details: Internal error code: 0x80990F85)

I ran across this error starting on 6/4/2011 and have been unable to find the root of the problem. In our environment, we have a DPM 2010 server dedicated to backing up all our SQL envrionment (about 45 SQL Servers total). All of the SQL
environment is backing up fine except for a SQL Cluster Application. This particular SQL Instances is part of a 6 node failover cluster with 6 SQL Instances distributed amongst them. The other 5 SQL instances in the cluster are backing
up fine; only one instance is failing. The DPM Alerts section shows this error when attempting to do a SQL backup of one of the databases on this SQL instance:
Affected area: KEN-PROD-VDB001\POSREPL1\master
Occurred since: 6/11/2011 11:00:56 PM
Description: Recovery point creation jobs for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com have been failing. The number of failed recovery point creation jobs =
4.
If the datasource protected is SharePoint, then click on the Error Details to view the list of databases for which recovery point creation failed. (ID 3114)
The DPM job failed for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com because the SQL Server instance refused a connection to the protection agent. (ID 30172 Details:
Internal error code: 0x80990F85)
More information
Recommended action: This can happen if the SQL Server process is overloaded, or running short of memory. Please ensure that you are able to successfully run transactions against the SQL database in question and then retry the failed job.
Create a recovery point...
Resolution: To dismiss the alert, click below
Inactivate alert
I have checked the cluster node this particular SQL instance is running on using Perfmon and the machine is nowhere near capacity on CPU, memory, network, or Disk I/O.  I have failed this SQL Application to another node in the cluster and
receive the same error (this other node has another clustered SQL application on it that is actively running as well as backing up fine). The only thing that I am aware of that has changed is that we installed SP2 for SQL 2008 about 2 weeks prior
to when the failures started to occur. However, we updated all six clustered SQL Instances at the same time and only this one is having this issue so I don't believe that caused the problem. We are running SQL 2008 SP2 (version 10.0.4000.0)
on all clustered instances along with DPM 2010 (version 3.0.7696.0) on this particular DPM server that has the issue.
One last thing, I have also noticed errors in the event log pertaining to the same SQL backups that are failing (but the time stamps are not concurrent with each backup attempt):
Log Name:      Application
Source:        MSDPM
Date:          6/13/2011 1:09:12 AM
Event ID:      4223
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      KEN-PROD-BS002.aarons.aaronrents.com
Description:
The description for Event ID 4223 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSDPM" />
    <EventID Qualifiers="0">4223</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-06-13T05:09:12.000000000Z" />
    <EventRecordID>68785</EventRecordID>
    <Channel>Application</Channel>
    <Computer>KEN-PROD-BS002.aarons.aaronrents.com</Computer>
    <Security />
</System>
<EventData>
    <Data>DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
</Data>
    <Binary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inary>
</EventData>
</Event>
Any help would be greatly appreciated!

Don't know if this helps or not, but I also noticed another peculiar issue that is derived from this problem. If I go to "Modify protection group", then expand the cluster, then expand all six nodes in the cluster, five of them show "All SQL Servers"
and allow me to expand the SQL Instance and show all databases; the one that is having a problem backing up, when I expand the node, doesn't even show that SQL exists on the node, when in fact, it does.
I would also like to add that the databases on this node that will not backup are running fine. They run hundreds of transactions daily so we know SQL itself is OK. Even though it is a busy SQL Server, there is plenty of available resources as
the SQL buffer and memory counters show the node is not under durress.

Bpel deployment fails for all processes that have revision other than 1.0.

Using: Release *10.1.3.3.1*
Hello All,
Bpel deployment fails for all processes that have revision other than *1.0*.
We have been attempting to deploy several BPEL projects via ANT script to a target environment and are encountering failures to deploy for every project which isn’t a (revision 1.0). We are getting the following error whenever we try to deploy a process with a revision other than 1.0:
D:\TJ_AutoDeploy\BPEL_AutoDeploy_BETA\build.xml:65: BPEL archive doesnt exist in directory "{0}"
     at com.collaxa.cube.ant.taskdefs.DeployRemote.getJarFile(DeployRemote.java:254)
     at com.collaxa.cube.ant.taskdefs.DeployRemote.deployProcess(DeployRemote.java:409)
     at com.collaxa.cube.ant.taskdefs.DeployRemote.execute(DeployRemote.java:211)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
     at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
     at org.apache.tools.ant.Main.runBuild(Main.java:668)
     at org.apache.tools.ant.Main.startAnt(Main.java:187)
     at org.apache.tools.ant.launch.Launcher.run(Launcher.java:246)
     at org.apache.tools.ant.launch.Launcher.main(Launcher.java:67)
The structure of our automated deployment script is as follows:
First, a batch script calls (Jdeveloper_BPEL_Prompt.bat) in order to set all necessary environment variables i.e. ORACLE_HOME, BPEL_HOME, ANT_HOME, etc for ant.
Next, the script lists every .jar file within the directory to an .ini file called BPEL_List.ini. Furthermore, BPEL_DIR, ADMIN_USER and ADMIN_PSWD variables are set and initialized respectively to:
-     “.” – point to directory where script is running from because all the BPEL processes are located here
-     “oc4jadmin”
-     “*********” (whatever the password for out environment is)
We’ve developed a method to have the script prompt the user to select the target environment to deploy to. Once the user selects the appropriate environment, the script goes through the BPEL_List.ini files and a loop tells it that for every BPEL process listed:
DO ant
-Dprocess.name=%%b
-Drev= !Rev!
-Dpath=%BPEL_DIR%
-Ddomain=default
-Dadmin.user=%ADMIN_USER%
-Dadmin.password=%ADMIN_PWD%
-Dhttp.hostname=%HOST%
-Dhttp.port=%PORT%
-Dverbose=true
(What’s happening is that the variables in the batch file are being passed on to the ANT script where *%%b* is the process name, !rev! is revision #, and so on…)
The loop goes through each line in the BPEL_List.ini and tokenizes the BPEL process into 3 parts *(%%a, %%b, and %%c)* but we only extract 2 parts: *%%b* (process name) and *%%c* which becomes !Rev! (revision number).
Example:
Sample BPEL process:
bpel_ThisIsProcess1_1.0.jar
bpel_ThisIsProcess2_SOAv2.19.0.001B.jar
After tokenizing:
%%a     %%b     %%c
bpel     ThisIsProcess1     1.0.jar
bpel     ThisIsProcess2     SOAv2.19.0.001B.jar
*!Rev!* and not *%%c* because *%%c* will return whatever the revision number is + the “.jar” file extension as illustrated above. So to circumvent this, we parse *%%c* so that the last 4 characters are stripped. Such is done like this:
set RevN=%%c
set RevN=!RevN:~0,-4!
Hence, the usage of !Rev!.
Below is a screenshot post of the ANT build.xml that goes with our script:


<project name="bpel.deploy" default="deployProcess" basedir=".">
     
     <property name="process.dir" value="${basedir}" />
          
          
     <property environment="env"/>
     
          <condition property="bpel.home" value="${env.BPEL_HOME}">
               <available file="${env.BPEL_HOME}/utilities/ant-orabpel.xml" />
          </condition>
     
     
     
     
     <property name="oracle.home" value="${env.ORACLE_HOME}" />
     <property name="bpel.home" value="${oracle.home}/bpel" />
     
     <property file="${process.dir}/build.properties"/>
     
     <import file="${bpel.home}/utilities/ant-orabpel.xml" />
     
     <property file="${bpel.home}/utilities/ant-orabpel.properties" />
     
     <target name="deployProcess">
          <tstamp>
               <format property="timestamp" pattern="MM-dd-yyyy HH:mm:ss" />
          </tstamp>
          
          <record name="build_verbose.log" loglevel="verbose" append="true" />
          <record name="build_debug.log" loglevel="debug" append="true" />
          <echo></echo>
          <echo>####################################################################</echo>
          <echo>BPEL_AutoDeploy initiated @ ${timestamp}</echo>
          <echo>--------------------------------------------------------------------</echo>
          <echo>Deploying ${process.name} on ${http.hostname} port ${http.port} </echo>
          <echo>--------------------------------------------------------------------</echo>
          <deployProcess
               user="${admin.user}"
               password="${admin.password}"
               domain="${domain}"
               process="${process.name}"
               rev="${rev}"
               dir="${process.dir}/${path}"
               hostname="${http.hostname}"
               httpport="${http.port}"
               verbose="${verbose}" />
          <sleep seconds="30" />
          
     </target>
     
</project>
SUMMARY OF ISSUE AT HAND:
~ Every bpel process w/ 1.0 revision deploys with no problems
~ At first I would get an invalid character error most likely due to the “!” preceding “Rev”, but then I decided to set rev=”false” in the build.xml file. That didn’t work quite well. In another attempt, I decided to leave the –Drev= attribute within the batch script blank. That still led to 1.0s going through. My next thought was deploying something other than a 1.0, such as 1.2 or 2.0 and that’s when I realized that if it wasn’t a 1.0, it refused to go through.
QUESTIONS:
1.     IS THERE A WAY TO HAVE ANT LOOK INTO THE BPEL PROCESS AND PULL THE REVISION ID?
2.     WHAT ARE WE DOING WRONG? ARE WE MISSING ANYTHING?
3.     DID WE GO TOO FAR? MEANING, IS THERE A MUCH EASIER WAY WE OVERLOOKED/FORGOT/OR DON’T KNOW ABOUT THAT EXISTS?
Edited by: 793292 on Jul 28, 2011 12:38 PM

Only thing i can think of is instead of using a MAC ACL , u cud jus use the default class
Policy Map Test
class class-default
police 56000 8000 exceed-action drop
Class Map match-any class-default (id 0)
Match any
You would be saving a MAC-ACL ;-).

Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection

"[DBNETLIB] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection"
After patches applied on patch Tuesday the database reports the above error.
All accounts are domain accounts and SQLServer uses Windows auth.
DCDIAG show no errors
All servers and DC have been restarted,
Message in db log confirms the connection is being denied due to trust.
Event log shows same rejection
Protocols enabled: named pipes, tcpip, memory
TESTS:
PortQry: "
TCP port 1433 (ms-sql-s service): LISTENING"
Connect with domain admin accounts works from multiple clients systems to DB.
Cannot connect with newly created domain admin account
Can connect if new admin account connect to server in terminal server session and uses UDL wizard or any other tool including isql.
New standard user also fails to connect.
NOTES:
I removed the SSL patch and the IE security update to see if that was an issue.
¯\_(ツ)_/¯

Has someone left the company or has an account of some nature been dropped/replaced?
Please click "Mark As Answer" if my post helped. Tony C.
Hi Tony,
Srry but No. We just installed the monthly updates.
I went back and found I had missed removing a patch. I missed the rollup for Windows Server 2003:
Event Type: Information
Event Source: NtServicePack
Event Category: None
Event ID: 4382
Date:  3/12/2015
Time:  12:26:04 PM
User:  NETTEST\admin
Computer: DATA1
Description:
Windows Server 2003 KB954920 was removed from your computer, and the previous Windows Server 2003 configuration was restored.
After I removed that is still didn't work but after about five minutes it started working.
I guess I ned to report that to MS after I research what might be changed to make the patch work.
Every time I get stuck and ask for help it seems to be just before I stumble on the solution.
Thanks for replying.
Well - maybe this will help someone else.
Thanks again for replying Tony
¯\_(ツ)_/¯

Error: Component failed to run due to a Object Package scheduling failure

Hi,
BusinessObjects XI R2 SP 5, FP 5.1
I am trying to schedule a group of reports (crystal reports) via a package where the output destination is to an email. At the event of execution of the scheduled time for the package; the package fails with the error: Component failed to run due to a Object Package scheduling failure. (Note: When scheduled individually it is successful and it was copied to the package from its original location, so there is no mistake in parameters or ODBC connections)
When we go to the history and within the instance, we see that some of the reports have the status as success and some are failed with the same error message. Even though some of the reports are made to fail at the event of 'NO DATA'; what I do not understand is that how come some of the other reports (which contains data and which works when trying to run manually or scheduled individually) are failing.
I would understand something is wrong when the entire package fails which is not the case here as say of 50 reports, 5 are successful and the rest fails with the same error.

Sorry posted on the wrong section...
Edited by: Deepu Philip on Mar 18, 2010 5:38 PM

Unhandled Exception Error - Login Failed for User

Hello,
I am receiving an error when I run my application stating “Unhandled exception has occurred. If you click continue, the application will ignore the error………..Login failed for MyUser.
When I click the Continue button the application runs and seems to work properly. This application used to run without receiving the error and I did not make any changes. I have another application that is using basically the exact same code and does not
receive the error. The only difference is the application is querying a different DB but using the exact same connection string. The error only occurs when I run the exe file created from the build. When I run (debug) the application from within the VS 2013
IDE I do not receive the error.
Here are the details to the error message:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Data.OleDb.OleDbException (0x80040E4D): Login failed for user 'jobrunner'.
   at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
   at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
   at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.OleDb.OleDbConnection.Open()
   at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
   at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
   at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
   at LoanOrig_FDIC_Codes.DataSet1TableAdapters.I_LoansTableAdapter.Fill(I_LoansDataTable dataTable) in u:\Visual Studio Projects\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\DataSet1.Designer.cs:line 1668
   at LoanOrig_FDIC_Codes.Form1.Form1_Load_1(Object sender, EventArgs e) in u:\Visual Studio Projects\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\Form1.cs:line 152
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
LoanOrig_FDIC_Codes
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///U:/Visual%20Studio%20Projects/LoanOrig_FDIC_Codes/LoanOrig_FDIC_Codes/LoanOrig_FDIC_Codes/bin/Debug/LoanOrig_FDIC_Codes.exe
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34238 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
System.Data.DataSetExtensions
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Data.DataSetExtensions/v4.0_4.0.0.0__b77a5c561934e089/System.Data.DataSetExtensions.dll
System.Numerics
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
System.Transactions
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
I'm not sure what the JIT debugger is but to my knowledge my other apps are not using that. The production username and password are correct in the connection string so I'm not clear why I am receiving this error especially since I'm not receiving the
error on my other application. I have also attached the code just in case it is needed. Any assistance will be greatly appreciated. Thank you.
Dave
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using ClosedXML.Excel;
using DocumentFormat.OpenXml;
using System.IO;
namespace LoanOrig_FDIC_Codes
public partial class Form1 : Form
SqlCommand sqlCmd;
SqlDataAdapter sqlDA;
DataSet sqlDS;
DataTable sqlDT;
SqlCommand sqlCmdCnt;
public Form1()
InitializeComponent();
//BEGIN BUTTON LOAD CLICK EVENT
private void btnLoad_Click(object sender, EventArgs e)
string sqlCon = "Data Source=FS-12345; Initial Catalog=ExtractGenerator; User ID=MyUser; Password=MyPW";
//Set the 2 dateTimePickers to today's date
DateTime @endDate = End_dateTimePicker.Value.Date;
DateTime @startDate = Start_dateTimePicker.Value.Date;
//Validate the values of the 2 dateTimePickers
if (endDate < startDate)
MessageBox.Show("End Date must be greater than or equal to the Start Date OR Start Date must be less than or equal to the End Date ", "Incorrect Date Selection",MessageBoxButtons.OK,MessageBoxIcon.Error);
//Reset both dateTimePickers to todays date
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
return;
//End of date validation
string sqlData = @"SELECT AcctNbr,
CurrAcctStatCD,
Org,
MJAcctTypCD,
MIAcctTypCD,
NoteOriginalBalance,
ContractDate,
FDICCATCD,
FDICCATDESC,
PropType,
PropTypeDesc
FROM I_Loans
WHERE CAST(ContractDate AS datetime) BETWEEN @startdate AND @enddate ORDER BY ContractDate";
SqlConnection connection = new SqlConnection(sqlCon);
SqlCommand sqlCmd = new SqlCommand(sqlData, connection);
sqlCmd.Parameters.AddWithValue("@startDate", startDate);
sqlCmd.Parameters.AddWithValue("@endDate", endDate);
sqlDS = new DataSet();
sqlDA = new SqlDataAdapter(sqlCmd); //SqlAdapter acts as a bridge between the DataSet and SQL Server for retrieving the data
connection.Open();
sqlDA.SelectCommand = sqlCmd; //SqlAdapter uses the SelectCommand property to get the SQL statement used to retrieve the records from the table
sqlDA.Fill(sqlDS, "I_Loans"); //SqlAdapter uses the "Fill" method so that the DataSet will match the data in the SQL table
sqlDT = sqlDS.Tables["I_Loans"];
//Code section to get record count
sqlCmdCnt = connection.CreateCommand();
sqlCmdCnt.CommandText = "SELECT COUNT(AcctNbr) AS myCnt FROM I_Loans WHERE ContractDate BETWEEN @startDate AND @endDate";
sqlCmdCnt.Parameters.AddWithValue("@startDate", startDate);
sqlCmdCnt.Parameters.AddWithValue("@endDate", endDate);
int recCnt = (int)sqlCmdCnt.ExecuteScalar();
txtRecCnt.Text = recCnt.ToString();
btnExport.Enabled = true;
//End of code section for record count
connection.Close();
dataGridView1.DataSource = sqlDS.Tables["I_Loans"];
dataGridView1.ReadOnly = true;
//Reset both dateTimePickers to todays date
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
//END BUTTON LOAD CLICK EVENT
//BEGIN BUTTON EXPORT CLICK EVENT
private void btnExport_Click(object sender, EventArgs e)
SaveFileDialog saveFD = new SaveFileDialog();
{ //ClosedXML code to export datagrid result set to Excel
string dirInfo = Path.GetPathRoot(@"\\FS-03250\users\dyoung\LoanOrig_FDIC_Codes");
if (Directory.Exists(dirInfo))
var wb = new XLWorkbook();
var ws = wb.Worksheets.Add(sqlDT);
ws.Tables.First().ShowAutoFilter = false;
//SaveFileDialog saveFD = new SaveFileDialog(); //I moved this variable to the top of the btnExport code block so that the variable will be available thru the entire scope of that code block
saveFD.Title = "Save As";
saveFD.Filter = "Excel File (*.xlsx)| *.xlsx";
saveFD.FileName = "LoanOrig_FDIC_Codes_" + DateTime.Now.ToString("yyyy-MM-dd");
if (saveFD.ShowDialog() == System.Windows.Forms.DialogResult.OK)
Stream stream = saveFD.OpenFile();
wb.SaveAs(stream);
stream.Close();
else if (saveFD.ShowDialog() == System.Windows.Forms.DialogResult.Cancel)
MessageBox.Show("Save file operation has been canceled", "Save As Canceled", MessageBoxButtons.OK, MessageBoxIcon.Stop);
return;
//End of ClosedXML code
MessageBox.Show("File has been exported to " + saveFD.FileName, "File Exported", MessageBoxButtons.OK, MessageBoxIcon.Information);
//MessageBox.Show("File has been exported to U:\\LoanOrig_FDIC_Codes", "File Exported", MessageBoxButtons.OK, MessageBoxIcon.Information);
else
MessageBox.Show("Drive " + saveFD.FileName + " " + "not found, not accessible, or you may have invalid permissions");
//MessageBox.Show("Drive " + "U:\\Visual Studio Projects\\LoanOrig_FDIC_Codes" + " " + "not found, not accessible, or you may have invalid permissions");
return;
//END THE SAVE AS PROCESS
//END BUTTON EXPORT CLICK EVENT
private void Form1_Load(object sender, EventArgs e)
//Set dates to be today's date when the form is openend
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
private void Form1_Load_1(object sender, EventArgs e)
// TODO: This line of code loads data into the 'dataSet1.I_Loans' table. You can move, or remove it, as needed.
this.i_LoansTableAdapter.Fill(this.dataSet1.I_Loans);
private void iLoansBindingSource_CurrentChanged(object sender, EventArgs e)
private void btnExit_Click(object sender, EventArgs e)
this.Close();
David Young

In SQL you have a login which allows access to the server but you must also have permissions to access each database that you will use (including Master). So I would verify that your user also has the necessary permissions on the database itself and
not just the SQL instance. The error you're getting is from SQL saying that the user doesn't have permissions. If it works for 1 DB but not the other on the same SQL instance then it is likely a missing permission on the DB itself.
I should note that you have a hard coded conn string in your code but the error is for a different user. I'm assuming that you simply posted it there for convenience and that you changed the values to obscure the data. If you are actually getting
the info from your config file then verify the connection string is correct. Also be sure to not use Integrated Security since it appears that you are using SQL authentication.

Administrator software failed to start due to an unexpected error

Not a terribly useful message from ARD after a fresh install of 10.5.3:
"The Remote Desktop Administrator software failed to start due to an unexpected error."
"The Remote Desktop software may not be installed correctly or the computer may require a restart"
It installed something in the system on first launch then popped up with this message. My main concern is that it pooched my system in the process by replacing something new in Mac OS X 10.5.3 with something old from ARD 3.2...
Restarting now but who knows, might not be back for a while... %-\

Kill the "ARDAgent" program, either in Activity Monitor or Terminal, and it will start back up again. When you see it running again(make sure it's a new instance via the PID), you should be able to start Remote Desktop up without any problems after that.

HSRP fails to work due to h/w failure

We have a situation that HSRP fails to work due to a partial h/w failure on the active router.
What happened is the active router continously getting input error on its Ethernet interface. User traffic fails to be received by this router. However the router is still able to send hello message to its standby router .When we do a sh standby on the active router, it says unknown standby which concluded that it does not receive hello message from the standby. The fault happened everyday . we can clear the problem by rebotting the router but fault came back the next day again for several times. Once we replaced the active router , problem did not return.
In understand HSRP uses mulitcast protocol . but I would like clarification that HSRP is using unidirectional comunication with the standby group. In a situation like this ,my assumption is the TX circuit on the LAN is working but teh RX circuit failed. The standby router would never know the LAN interface of actice router fails to receive its hello messages. Therefore the fail over never trigger.
Appreciate your feedback on this.
Regards
Edmond

I believe HSRP use multicast address for the hello but it still use broadcast to ensure the standby router is active. I can't find such info. to prove it. Please correct me if I am wrong.
For the LAN connection, if the RX is failed, the interface should not up, or say, e.g. if the RX-pair of cable is not connectioned, the interface should down. So, I believe there is something wrong in the LAN interface, it may not only the RX side error.
Just my 2 cents.

BI Server Fails for No Apparent Reason

Hi,
I have a problem I cannot explain in that our BI Server continually fails for no apparent reason.
We have OBIEE+ installed on Windows Server 2003 together with Oracle 10g. The OTM Advanced Analytics repository &.catalog has been installed with the OTM (Full HDOWNER /limited GLOGOWNER) database under pinning it (without a full OTM installation) because there is a need for an FTI environment for users to 'play' with but infratructure limitations prevent a full-blown OTM installation. The setup is unorthodox but the environment does work except for this issue.
The BI Server fails on a regular basis. I cannot find any reports in the NQSServer Log (or any other log I can think of) that points to the cause or indeed that it has actually gone down - the only clue that it has failed is the startup entry resulting from the restart of the service.
To minimise impact I have written a cmd file task that is invoked whenever the BI Server goes down - this shuts down the Presentation Server and Java Host services and then starts all the tasks in the required sequence. The resultant log from this task shows that the BI server goes down every 30 minutes. Obviously something is triggered every half-hour. So I have trawled through the various config files for a clue of what this could be but I can't find anything obvious.
In the repository Administrator, I have suspended all initiallisation blocks of repository variables except for those that are required and the refresh of those remaining is limited to 0600hrs daily so these should not contribute to this issue.
I would be grateful for any suggestions.

Hi John,
We are running the environment on a VM server with Windows Server 2003 installed with 2GB ram and 50GB disk space. Beyond that, I'm not sure what memory measurement your asking for. Currently the server is running at 1.39 GB memory usage with NQSSever currently using 50MB of that. So it still has 0.6GB of memory it can call on if needed. When I open up a dashboard from a remote workstation, the memory usage inceases to about 55MB.
I have already gone through the NQSConfig.ini file and increased space allocations, for example MAX_CACHE_ENTRY_SIZE = 10 MB (Increased from 1MB) but these changes had no effect.
Exactly which memory measurement are you after?
Thanks in advance.

[AUTOSCALE FAILED] - Autoscale task failed for INSERT_CLOUD_SERVICE_NAME due to no metrics available

Similar Messages

Maybe you are looking for