Autoscroll the 'Effects Control' panel

CS4: How do I get the Effect Control Panel to autoscroll like the timeline does? The current time marker scrolls right off the end of the panel.

You can't.

Similar Messages

Markers in the Effect Controls Panel

I'm up to page 165 of the Premiere 6 manual, trying to understand markers, and it says:
Create markers in the Effect Controls panel
In the Effect Controls panel, you can view all of the markers that you created in the Timeline panel. You can also add markers to your sequence to designate where you would like to place effects and see the markers as you work in the Effect Controls panel. In addition, you can create and manipulate markers directly in the Effect Controls panel.
1. Drag the playhead to the place where you want to create a marker.
2. Right-click (Windows) or Control-click (Mac OS) in the timeline ruler:
In Premiere Pro CS5.5, and earlier, choose Set Sequence Marker, and then choose the type of marker you want to set.
In Premiere Pro CS6, choose Add Marker, or press the M key.
I follow those instructions to the best of my ability, and nothing appears in the Effect Controls Panel. The previous three paragraphs are labelled as CS5.5 and earlier. I'm wondering if this paragraph should also have been labelled as CS5.5 and earlier.
In CS6, do markers appear in the Effect Controls panel? If they do, how do you get them to appear?

Thanks Jeff. My Effect Controls timeline was hidden. I don't remember it even being there, but I suppose it must have been at some stage.
Now, another Marker matter. At the bottom of page 165 it states:
"Move a marker
Do one of the following:
To move a clip marker in a clip that’s in a sequence, open the clip in the Source Monitor and drag the Marker icon in the Source Monitor’s time ruler. (You can’t manipulate clip markers in the Timeline panel)."
This is what I've done:
In the Source Monitor I set up a marker for a particular clip. Three things happen.
An empty grey Marker appears above the Timeline in the Source Monitor (that Marker disappears if I move the Playhead).
Two green Markers appeared inside the clip in the Sequence Panel (those Markers stay put).
The Marker details appear in the Marker Panel.
I can cause the Marker to move if I change the In and Out points in the Marker Panel, but I cannot "drag the Marker icon in the Source Monitor’s time ruler." I can't see any Marker, except the empty grey one.

I cannot edit the Cross Dissolve in the Effects Control Panel in Premiere Pro CC 2014

If I put a film dissolve between two clips on my timeline, and then click on the film dissolve, I'm able to go to my Effects Window and drag clip A (Top Bar) to the right and trim lets say 3 seconds then go to Clip B (Bottom Bar) and drag to the left to take off lets say 10 seconds off the beginning of clip B. That very method worked for cross dissolves until this latest update for CC 2014. It forces me to use ripple edit in the timeline on each endpoint of each clip instead of flying through it in the effects window by clicking each dissolve in the time line. It's just weird that they would take that out for only the cross dissolve which I prefer using more than anything and not the rest of the dissolves. Does anyone have a clue why? Or is this a bug?

That is correct. This is the only transition where the workflow has changed.
You can now make it into a preset.
BTW I dont use it often but i dont like it either not being able to adjust the cross dissolve in the EC.

Masking & Tracking Ellipse, Pen, and 4-Point Polygon (square) tools missing from the Effect Controls panel

I am trying to mask a small area of some of the shots I am using for a small teaser. The three tools that are supposed to present themselves on the effects tab when I select an effect such as "Brightness and Contrast" are not there. Does anyone know another way to use these tools, or how to add them to the effects tab?

What version of PPro are you running?
Its only available on recent versions. Not sure 1st but CC2014.1 onward maybe .

Controls in Effect Controls Panel are twirled close. How to open them?

I have a question please .The chapter 211 in Adobe Premier Pro CC 2014 classroom in a book show me that I may to adjust an ease lines ,in a Effect controls panel .It is look like that.
So , when I look at to my Premier Pro Effect controls panel ,I simply haven't these lines.And here is my Effect controls.Where they are?

You need to click on the disclosure triangle next to the effect name to reveal the lines:
MtD

I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

HT201317 I am trying to upload photos from my Windows 7 machine, and I was told to drag them into the photo stream in the iCloud control panel. I have downloaded the control panel several times, but cannot find the place to upload the photos from my Windo

I am trying to upload photos from my Windows 7 desktop, and was told to go to the iCloud control panel and drag the photos into the
upload to photo stream icon. I have downloaded the contol panel several times and cannot find the icon to get this done. HELP

If you're trying to add photos to photo stream on your PC, you drag them to your photo stream uploads folder (normally My Pictures\Photo Stream\Uploads).

When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

How can I Use the iCloud Control Panel to pick a new folder

I apparently moved or deleted my iCloud folder and keep getting this message Use the iCloud Control Panel to pick a new folder. How do I do this?

I have/had the same problem, just started this morning. I tried a system restore to a known good date. I still had the problem so I rolled restored the system to the latest.
Thinking that it might have something to do with priviliges, I reviewed my user account and noticed it was set to "Administrator". On a whim, I switched my user account from administrator to "standard user" and I'll be... the issue dissapeared. I have no idea why. But I thought I'd pass it along.

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

I downloaded the iCloud control panel on my PC but can't sign in - message says "This apple ID is valid but not an iCloud account. I've tried the account set up several times but it keeps just spinning me in circles. Can you help?

I downloaded the iCloud control panel on my PC but can't sign in - message says "This apple ID is valid but not an iCloud account. I've tried the account set up several times but it keeps just spinning me in circles, asking me to sign in and then I get the same message again. This is getting frustrating and I really don't seem to be able to get help. I can't contact customer support because I have a PC and there is a serial number of an apple device required.Can anyone help please?

You can't setup (create) an iCloud account using a PC. You must use an Apple device, a Mac or an iPhone etc. Once you have created an account you can sign in from your PC.

My ipod app no longer works. Everytime I go to open the ipod app it stays open for a second and then shuts down. I am not able to get anything to play either through the standard ipod controls or the multitasking control panel. I'm sure there will be an u

my ipod app no longer works. Everytime I go to open the ipod app it stays open for a second and then shuts down. I am not able to get anything to play either through the standard ipod controls or the multitasking control panel. I'm sure there will be an update soon to correct this, i just wanted to see if anyone else was having the same problem.
wen i open ipod in my iphone ,, it gets stuck ,, and get backs to the menu ,,, and doesnot play anything ,, not video nor song

If your phone is not officially unlocked by the carrier in the UK, you can not use the phone using another SIM, unless you modify the software or the SIM, which can lead to unexpected results, such as non functioning apps.
Unauthorized modification of iPhone OS has been a major source of instability, disruption of services, and other issues
Problems resulting from those modifications can't be discussed in these forums, due to the Terms of Use

Problem with Office 2007 whenever I install the iCloud Control Panel for Windows

Sadly I have a Win7 laptop as my work hack and am using Office 2007. Outside of work I use iCloud to sync calenders between various iOS/OS X devices however whenever I install the iCloud Control Panel for Windows Plugin my email no longer loads. Outlook starts fine and just sits there with an empty inbox waiting for mail to load. I can't even open the iCloud Panel from within Control Panel either to set preferences!
Unistalling the iCloud plug-in resolves this but I really want to sync my iCloud calender with Outlook and can't see any other way to do it, plus it worked before and then just stopped.
Any assistance would be appreciated.

I tired everything that was suggested in the forum. Tried IE and firefox to no avail. When I tried computers in stores both worked. A friend of mine who has the 32 bit setup got it to work. Several folks have stated it is the compatability issue with 64 bit. As a last resort, I loaded safari on my home computer, and yep, it works. Go figure, apple product.

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed. Thanks!

If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership.
Please refer to : Lightroom and Creative Cloud FAQ
Regards
Rajshree

The iCloud Control Panel will not intall on my WIN 7 32-bit PC

the iCloud Control Panel will not install on my WIN 7 32-bit PC. I receive the error message,
"There is a problem with this Windows installer package. A program run as part of the install did not finish as expected. Contact your local support personnel or package vendor."
When the panel finished being "backed off" my PC, I also received the following message,
"iCloud for Windows Installer Error.
The installer encountered errors before iCloud for Windows could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
Click FINISH to exit the installer."
Each time I tried to download and install the Control Panel, these messages would appear.
The Genius Bar was unable to help me and referred me to the ICloud Support Line. They were unable to help me.
I refuse to believe that Apple is unable to solve this issue with their own software, but if there is anyone in this august community that can help me, I would be forever grateful,
Thank you.

I'm having the exact same problem, and the exact same error messages. I have windows 8.1 64-bit. I've tried looking for solutions everywhere. I'm very frustrated.

Autoscroll the 'Effects Control' panel

Similar Messages

Maybe you are looking for