Autostart
Hi
First of all, excuse my poor english
How can I stop Itunes to recognize automatically Audio CDs?
I don´t want itunes to start auto.
Greetings
Open My computer and right click on your CD drive.
Select Properties>>Auto Play.
Click on the arrow in the box near the top and you should see a drop down menu.
Select "Music CD".
Then go to "Actions".
Either select "do nothing" as the action, or select " Prompt me..."
I have XP but I expect it is simliar in Vista.
Similar Messages
-
Is there a way to make itunes autostart with windows in mini mode
Is there a way to make itunes autostart with windows in mini mode i.e the taskbar player mode where it is most less obstrusive . itune takes a lot of time to start under windows
Just delete the same songs from your library in iTunes. Select the first song, hold the shift key, select the last song (which will select everything in between) and press delete.
-
[SOLVED] Openbox autostart no longer working since upgrade
After the upgrade on May 14 2013 my autostart file no longer works. I tried renaming my autostart.sh to just autostart no luck. There is nothing wrong with the autostart file as I can run it manually and it will load all my apps. Also, if I cd to /usr/lib/openbox/ and run openbox-autostart directly it works. Here are the updated packages:
[2013-05-14 21:34] [PACMAN] upgraded ethtool (1:3.8-1 -> 1:3.9-1)
[2013-05-14 21:34] [PACMAN] upgraded firefox (20.0.1-5 -> 21.0-1)
[2013-05-14 21:34] [PACMAN] upgraded gsettings-desktop-schemas (3.8.0-1 -> 3.8.2-1)
[2013-05-14 21:34] [PACMAN] upgraded glib-networking (2.36.1-1 -> 2.36.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme-symbolic (3.8.0.1-2 -> 3.8.2.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme (3.8.0-1 -> 3.8.2-1)
[2013-05-14 21:34] [PACMAN] upgraded gnupg (2.0.19-7 -> 2.0.20-1)
[2013-05-14 21:34] [PACMAN] upgraded gtkmm (2.24.2-2 -> 2.24.3-1)
[2013-05-14 21:34] [PACMAN] upgraded gvfs (1.16.1-2 -> 1.16.2-1)
[2013-05-14 21:34] [PACMAN] upgraded libical (0.48-1 -> 1.0-2)
[2013-05-14 21:34] [PACMAN] upgraded mplayer (35920-2 -> 35920-3)
[2013-05-14 21:34] [PACMAN] upgraded orage (4.8.4-1 -> 4.8.4-2)
[2013-05-14 21:34] [PACMAN] upgraded pango (1.34.0-1 -> 1.34.1-1)
[2013-05-14 21:34] [PACMAN] upgraded pdnsd (1.2.9.a-1 -> 1.2.9.a-2)
[2013-05-14 21:34] [PACMAN] upgraded python2-distribute (0.6.38-1 -> 0.6.39-1)
[2013-05-14 21:34] [PACMAN] upgraded python2-zope-interface (4.0.3-1 -> 4.0.5-1)
[2013-05-14 21:34] [PACMAN] upgraded sudo (1.8.6.p8-1 -> 1.8.6.p8-2)
[2013-05-14 21:34] [PACMAN] upgraded thunderbird (17.0.5-2 -> 17.0.6-1)
[2013-05-14 21:34] [PACMAN] upgraded virtualbox (4.2.12-2 -> 4.2.12-3)
[2013-05-14 21:34] [PACMAN] upgraded vte-common (0.34.4-1 -> 0.34.5-1)
[2013-05-14 21:35] [PACMAN] upgraded python3-threaded_servers (2013.5.12.3-1 -> 2013.5.14.1-1)
Not sure what's going on or what could have caused it. My .xinitrc looks like this:
#!/bin/sh
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
export BROWSER="chromium"
# Start GNOME Keyring
eval $(/usr/bin/gnome-keyring-daemon --start --components=gpg,pkcs11,secrets,ssh)
# You probably need to do this too:
export SSH_AUTH_SOCK
export GPG_AGENT_INFO
export GNOME_KEYRING_CONTROL
export GNOME_KEYRING_PID
exec openbox-session
My .zprofile
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && startx &> ~/.xlog
My systemd startup service:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Getty on %I
Documentation=man:agetty(8) man:systemd-getty-generator(8)
Documentation=http://0pointer.de/blog/projects/serial-console.html
After=systemd-user-sessions.service plymouth-quit-wait.service
After=rc-local.service
# If additional gettys are spawned during boot then we should make
# sure that this is synchronized before getty.target, even though
# getty.target didn't actually pull it in.
Before=getty.target
IgnoreOnIsolate=yes
# On systems without virtual consoles, don't start any getty. (Note
# that serial gettys are covered by [email protected], not this
# unit
ConditionPathExists=/dev/tty0
[Service]
# the VT is cleared by TTYVTDisallocate
ExecStart=-/sbin/agetty -a dodo3773 %I 38400
Type=simple
#Restart=always
#RestartSec=0
UtmpIdentifier=%I
TTYPath=/dev/%I
TTYReset=no
TTYVHangup=no
TTYVTDisallocate=no
KillMode=process
IgnoreSIGPIPE=no
# Unset locale for the console getty since the console has problems
# displaying some internationalized messages.
Environment=LANG= LANGUAGE= LC_CTYPE= LC_NUMERIC= LC_TIME= LC_COLLATE= LC_MONETARY= LC_MESSAGES= LC_PAPER= LC_NAME= LC_ADDRESS= LC_TELEPHONE= LC_MEASUREMENT= LC_IDENTIFICATION=
# Some login implementations ignore SIGTERM, so we send SIGHUP
# instead, to ensure that login terminates cleanly.
KillSignal=SIGHUP
[Install]
WantedBy=getty.target
Edit: I tried switching to bash in a tty and then just startx but that doesn't help either.
Edit2: To be clear openbox does load a desktop. The autostart scripts at ~/.config/openbox/ just don't run. Thanks.
Edit3: I decided to run the command issued in openbox-session and added --debug to it. Here is the output of "xinit /usr/bin/openbox --debug --startup "/usr/lib/openbox/openbox-autostart OPENBOX" "$@" -- :1 -nolisten tcp" :
X.Org X Server 1.14.1
Release Date: 2013-04-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.8.7-1-ARCH x86_64
Current Operating System: Linux dodo713 3.9.2-2-ck #1 SMP PREEMPT Sun May 12 18:19:49 EDT 2013 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=06874255-7a5d-4968-8f09-1e53cb761f44 ro quiet init=/usr/lib/systemd/systemd
Build Date: 17 April 2013 02:37:06PM
Current version of pixman: 0.30.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Fri May 17 08:14:11 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
setversion 1.4 failed
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
setversion 1.4 failed
Openbox-Debug: --startup /usr/lib/openbox/openbox-autostart OPENBOX
Openbox-Debug: Moving to desktop 1
Openbox-Debug: not managing override redirect window 0x4000bb
which: no hsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
which: no esetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
which: no xsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
kupfer: Reading from stdin
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Openbox-Debug: Caught signal 22. Ignoring.
Openbox-Debug: UPDATE DESKTOP NAMES
Openbox-Debug: Keyboard map changed. Reloading keyboard bindings.
Edit4: Removed everything from /etc/xdg/autostart and ~/.config/autostart/ directories. That didn't work.
Edit5: Tried installing xorg-xsetroot to let openbox set the color of the wallpaper. That didn't work.
Edit6: Checked the output of "loginctl show-session $XDG_SESSION_ID" to make sure that wasn't the issue. Looks okay to me:
Id=1
Timestamp=Fri 2013-05-17 10:25:53 PDT
TimestampMonotonic=13650783
DefaultControlGroup=systemd:/user/1000.user/1.session
VTNr=1
TTY=tty1
Remote=no
Service=login
Leader=405
Audit=1
Type=tty
Class=user
Active=yes
State=active
KillProcesses=no
IdleHint=no
IdleSinceHint=1368811547544203
IdleSinceHintMonotonic=7545641
Name=dodo3773
Edit7: Tried installing xorg-xrdb thinking maybe that would help and did todays updates. No luck yet.
Edit8: Kupfer still loads even though nothing else does. So I uninstalled kupfer. Same thing though. No autostart.
Edit9: Tried booting into repo kernel instead of ck kernel. Didn't work.
Last edited by dodo3773 (2013-05-19 06:34:44)WonderWoofy wrote:Interestingly, of all those things you included in your post, you forgot to include the autostart script itself. What does that look like?
Well, since it worked fine even when called indirectly through openbox-autostart and since it's worked fine for months I figured it was fine. I am happy to post it though. Here you go:
feh --bg-scale /home/dodo3773/Pictures/blacksolid.png &
xfce4-panel &
numlockx &
keepassx -lock &
kupfer --no-splash &
~/Documents/Scripts/startupopen.sh &
sleep 30 && sudo /usr/bin/ntpd -qg &
sudo /usr/sbin/ethtool -K eth0 rx off &
~/Documents/Scripts/conky.sh &
sudo /home/dodo3773/Documents/Scripts/temp_throttlenew > /dev/null 2>&1 &
Here are the external scripts that are called (startupopen.sh and temp_throttlenew):
startupopen.sh
#! /bin/bash
sleep 13
chromium &
thunderbird &
sleep 20
devilspie -a &
sleep 7
pkill devilspie &
exit
temp_throttlenew
#!/bin/bash
# temp_throttle.sh max_temp
# USE CELSIUS TEMPERATURES.
if [[ $EUID -ne 0 ]]; then
echo "This script must be run as root" 1>&2
exit 1
fi
#if [ $# -ne 1 ]; then
# If temperature wasn't given, then print a message and exit.
# echo "Please supply a maximum desired temperature in Celsius." 1>&2
# echo "For example: ${0} 60" 1>&2
# exit 2
#else
#Set the first argument as the maximum desired temperature.
MAX_TEMP=85
#fi
# The frequency will increase when low temperature is reached.
let LOW_TEMP=$MAX_TEMP-5
CORES=$(nproc) # Get number of CPU cores.
echo -e "Number of CPU cores detected: $CORES\n"
# Temperatures internally are calculated to the thousandth.
MAX_TEMP=${MAX_TEMP}000
LOW_TEMP=${LOW_TEMP}000
# FREQ_LIST is a list (array) of all available cpu frequencies the system allows.
declare -a FREQ_LIST=($(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies))
# CURRENT_FREQ relates to the FREQ_LIST by keeping record of the currently set frequency.
let CURRENT_FREQ=1
function set_freq {
echo ${FREQ_LIST[$1]}
cpupower frequency-set -g "ondemand" -d "800MHz" -u ${FREQ_LIST[$1]}
function throttle {
if [ $CURRENT_FREQ -ne $((${#FREQ_LIST[@]}-1)) ]; then
let CURRENT_FREQ+=1
echo -n "throttle "
set_freq $CURRENT_FREQ
fi
function unthrottle {
if [ $CURRENT_FREQ -ne 0 ]; then
let CURRENT_FREQ-=1
echo -n "unthrottle "
set_freq $CURRENT_FREQ
fi
function get_temp {
# Get the system temperature.
# If one of these doesn't work, the try uncommenting another.
TEMP=$(cat /sys/class/thermal/thermal_zone0/temp)
#TEMP=$(cat /sys/class/hwmon/hwmon0/temp1_input)
#TEMP=$(cat /sys/class/hwmon/hwmon1/device/temp1_input)
while true; do
get_temp
if [ $TEMP -gt $MAX_TEMP ]; then # Throttle if too hot.
throttle
elif [ $TEMP -le $LOW_TEMP ]; then # Unthrottle if cool.
unthrottle
fi
sleep 3
done
Stuff that needs sudo is in my sudoers as "username hostname NOPASSWD: item1,item2,etc,etc". Nothing too exciting. Seems like if there was suddenly something wrong with my autostart file at least some of the stuff would run either way though cause of "&". Pretty puzzling this issue is. -
[Solved]Openbox: Autostart.sh doesn't work
Hello
I just made a fresh install of arch with openbox but I can't launch my applications at start
xterm &
nitrogen --restore &
This doesn't work in ~/.config/openbox/autostart.sh neither in /etc/xdg/openbox/autostart.sh
Can someone help me plz ?
thanks and sorry for my bad english
Last edited by Jeager (2010-05-16 20:48:43)Sorry I'm new with linux. Thanks you for your time
Last edited by Jeager (2010-05-16 20:40:26) -
Is there a way to prevent music from autostarting when connected to bluetooth
Is there a way to prevent music from autostarting when connected to bluetooth
MikeWhen you connect the device open iTunes and select it from the sidebar. Click on the Summary tab in the main window. Uncheck the option to automatically connect to iTunes. You will find it in the collection of options near the lower part of the window.
-
PlayOptions playMode="pause" How can you get a web show to autostart?
LR3.2
I created several Web Albums and want the albums to start immediately without any user interaction.
I'm assuming that under resources->styles in the style.xml one would use
Options playMode which has a default setting of pause,
what are the other parameters this can be set to????
I'm assuming this is the setting to use for autostarting the Web Album slideshow.
If this is not how to autostart, then what does one need to do?
I created several Web Albums with Layout Style Lightroon Flash Gallery.From what I have seen on the web this option is not in use and there is no way to autoplay. Sadly
-
Is it possible to make an Autostart application in Java?
Hi,
I have some stuff that I would like to burn on a CD and I thought that it would be very nice if I could put an autostart application on the same CD which would start as soon as I put this CD in CD-drive. I dont know whether this can be done in Java. I am using Excelsior Jet so I would make this as an usual autostart.exe application.
ThanxThe only thing you have to do, is to put the JRE on the CD as well. Say in sub-directory jre (you can copy the jre folder from your JDK installation)
I'm not sure how the autostart stuff works, but as far as I can remember it's just the name of an exe. So you could put someting like
jre\javaw.exe -jar MyApplication.jar
into the autostart definition -
Multiple Adobe CEF Helper, Conhost, icalcs.exe in Windows 8.1 Autostart
While checking some autostart apps, that I could possibly deactivate, I found something strange.
There are multiple entries for "Adobe CEF helper", "Conhost" and "icacls.exe". All grouped under the Adobe Creative Cloud.
On my other machine, Conhost and icalcs.exe don't appear at all and Adobe CEF helper only once.
They do not noticeably create any errors, however, it's not feeling right. I don't know exactly when these entries appeared for first time. The device is pretty new and I just installed a bunch of work related software like Office 365, Adobe CC, Chrome, ...
When installing Filezilla, some bloatware/adware was automatically installed on the system (blame sourceforge, see download comments over there). Currently I'm testing Kaspersky Internet Security, 30 days trial. But I don't think none of them is to blame.
I would personally like to avoid reinstalling Adobe CC, because it lasts forever.
Q: What might have caused these entries? Should I correct it? And how should I correct it?
System: Windows 8.1 64bit on an fairly new ASUS GL550JK.
Thanks.Update: I reinstalled the whole system and it still shows up.
Directly after the installation of Adobe CC, only Adobe CC showed up in the Autostart menu. Even after a restart still nothing (and the entry still had "boot time - no measured"). After the boot time was measured, same subentries as above appeared. -
It *****,
iTunes 11.1.2 always autostarts and plays music after a while.
killall iTunes helps. For about 5 minutes or so.
Magic Trackpad stops. Mouse pointer hangs. The only way is to disconnecting and reconnecting the Pad.
I think there are Bluetooth problems with Mavericks.
Hope there will be updates this month.Well done Apple!!!!
I thought the problem was with the itunes 11.4 update, because after updating all devices where giving me the problems, but now we have updated our Iphone 4S to version 8.0.2 and this one has been connected to the itunes, found all devices showing there normal storage capacity again -
[SOLVED] Problems autostarting xbmc after nvidia upgrade
Hello!
With nvidia version 302.17-1 and with 302.17.2 xorg errors and fails when autostarting xbmc.:
Here is my Xorg.0.log: https://gist.github.com/3118969
Here is my xorg.conf:
https://gist.github.com/3118996
But downgrading nvidia and nvidia-utils to version 295.59 makes everything work again.
So is this considered as a bug or can I change my configuration to make it work with latest nvidia drivers?
My graphics card is PCI and not PCIe, maybe there is some problem with old PCI cards?
I am now using standard xbmc package in repositories (earlier I used xbmc-pvr-git but I changed to standard xbmc to see if it was a problem even without using AUR packages).
Last edited by ronnylov (2012-07-17 14:04:32)Thanks. But I got another problem now because I can't upgrade from nvidia 295.59 to the latest version. There is some kind of dependency problem, probably because of the switch from /lib to /usr/lib.
[ronny@htpc ~]$ sudo pacman -Syu
Lösenord:
:: Synkroniserar paketdatabasen...
core är senaste versionen
extra är senaste versionen
community är senaste versionen
:: Påbörjar full systemuppgradering...
löser beroenden...
letar efter inre konflikter...
Mål (3): cairo-1.12.2-2 nvidia-302.17-2 nvidia-utils-302.17-1
Total Installationsstorlek: 54,02 MiB
Nettouppgraderingsstorlek: 0,69 MiB
Fortsätt med installation? [Y/n]
(3/3) kontrollerar paketintegritet [######################] 100%
(3/3) laddar paketfiler [######################] 100%
(3/3) kontrollerar filkonflikter [######################] 100%
fel: misslyckades att påbörja överföringen (motstridiga filer )
nvidia: /usr/lib/modules/extramodules-3.4-ARCH/nvidia.ko.gz existerar i filsystemet
Fel uppstod, inga paket uppgraderades.
[ronny@htpc ~]$
Trying to following the info here https://wiki.archlinux.org/index.php/De … iki:usrlib:
[ronny@htpc ~]$ grep '^lib/' /var/lib/pacman/local/*/files
/var/lib/pacman/local/nvidia-295.59-1/files:lib/
/var/lib/pacman/local/nvidia-295.59-1/files:lib/modules/
/var/lib/pacman/local/nvidia-295.59-1/files:lib/modules/extramodules-3.4-ARCH/
/var/lib/pacman/local/nvidia-295.59-1/files:lib/modules/extramodules-3.4-ARCH/nvidia.ko.gz
OK the old package installed files in the wrong place when I downgraded nvidia after the update to /usr/lib.
These packages need rebuilding so as not to include the /lib directory. They can also simply be uninstalled and reinstalled again after upgrading glibc.
So I try to uninstall nvidia and nvidia-utils:
[ronny@htpc ~]$ sudo pacman -Rs nvidia nvidia-utils
Lösenord:
kontrollerar beroenden...
fel: misslyckades att förbereda överföring (kunde inte tillfredställa beroenden)
:: libva: behöver libgl
:: mesa: behöver libgl
:: mplayer: behöver libgl
:: xorg-xdriinfo: behöver libgl
OK then uninstall these packages as well...
[ronny@htpc ~]$ sudo pacman -Rs nvidia nvidia-utils libva mesa mplayer xorg-xdriinfo
kontrollerar beroenden...
fel: misslyckades att förbereda överföring (kunde inte tillfredställa beroenden)
:: ffmpeg: behöver libva
:: freeglut: behöver mesa
:: glew: behöver mesa
:: gnome-mplayer: behöver mplayer
:: vdpau-video: behöver libva
:: xbmc: behöver libva
:: xorg-utils: behöver xorg-xdriinfo
and I get even more dependency problems.. I am a little bit new on this but do I need to reinstall almost everything just to uninstall a video driver? I just want to replace the old driver with the new one...
I think I need a hint of how to solve my problem. Perhaps this thread belongs somewhere else in the forum?
Last edited by ronnylov (2012-07-17 11:01:31) -
How to cancel autostart program settings in Lion?
my issue may be deeper as Lion has really messed up so many of my programs. tons of little issues and few big ones. but anyway. whenever i log in, mail, itues and safari auto open...even if i don't check the box asking if i want programs to autostart when i log out. I have tried deselecting "restore windows when quitting and re-opening aps" the problem is that i can't save this option. I deselect the item and then close the window, but when i open it up it is selected again. is this an issue or am i missing a way to save this selection.
also tried looking at login items under my user in User and groups. Any ideas? Thanks in advance.You might look at this: Managing Mac OS X Lion's application resume feature. You could also check out RestoreMeNot and Application St... which can help fix the issue.
-
[SOLVED] Openbox Autostarting only some programs
Ok, so I've tried searching the forums and either cannot find the one that answers my question or it doesn't exist. Either way, I have my openbox autostart script set up like this:
xcompmgr &
nitrogen --restore &
yakuake &
cairo-dock &
The file is saved as ~/.config/openbox/autostart.sh Only cairo dock and yakuake start up at the start of the openbox session. The cairo dock has the black box around it from xcompmgr not being run but then if i manually start it in a terminal with "xcompmgr" then it goes away like it should. So xcompmgr won't autostart and nitrogen won't restore either. Nitrogen works if I manually do it after the openbox session has begun but only stays while i'm logged in, no restoring upon next login. I'm trying to figure out if I have some syntax wrong? I've tried separating the xcompmgr as far away from the cairo dock to give it more time to load but nothing...any help would be very appreciated.
other info: I have no DE, just the dock, openbox and nitrogen for my desktop.
Last edited by DonTonberry (2012-10-05 00:48:00)did as you said 2ManyDogs and received this:
~]$ ~/.config/openbox/autostart.sh
/home/tonberry/.config/openbox/autostart.sh: line 3: $'\357\273\277nitrogen': command not found
/home/tonberry/.config/openbox/autostart.sh: line 1: $'\357\273\277xcompmgr': command not found
[tonberry@knife ~]$ QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Yakuake is already running, opening window....
============================================================================
Cairo-Dock version : 3.0.2
Compiled date : Jul 16 2012 19:29:57
Built with GTK : 3.4
Running with OpenGL: 1
============================================================================
CairoKeyBinding '<Super>L' failed!
warning : (/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-3.0.2/src/gldit/cairo-dock-keybinder.c:cd_keybinder_bind:283)
Couldn't bind '<Super>L' (Log out: Lock the screen)
This shortkey is probably already used by another applet or another application
CairoKeyBinding '<Control>F12' failed!
warning : (/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-3.0.2/src/gldit/cairo-dock-keybinder.c:cd_keybinder_bind:283)
Couldn't bind '<Control>F12' (Log out: Show the log-out menu)
This shortkey is probably already used by another applet or another application
CairoKeyBinding '<Control>Return' failed!
warning : (/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-3.0.2/src/gldit/cairo-dock-keybinder.c:cd_keybinder_bind:283)
Couldn't bind '<Control>Return' (Scooby-Do: Enable/disable the Finder)
This shortkey is probably already used by another applet or another application
CairoKeyBinding '<Super>Return' failed!
warning : (/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-3.0.2/src/gldit/cairo-dock-keybinder.c:cd_keybinder_bind:283)
Couldn't bind '<Super>Return' (Control from keyboard: Enable/disable the keyboard control of the dock)
This shortkey is probably already used by another applet or another application
CairoKeyBinding '<Shift><Ctrl>F4' failed!
warning : (/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-3.0.2/src/gldit/cairo-dock-keybinder.c:cd_keybinder_bind:283)
Couldn't bind '<Shift><Ctrl>F4' (Show Desktop: Expose all the desktops)
This shortkey is probably already used by another applet or another application -
Autostart in openbox doesn't work ...
hi guys,
i recently set up a nice and plain system using kde4 and openbox. everything's working fine except the autostart feature in openbox. i edited the autostart.sh and .xinitrc files several times, but none of my tries were successful
i'm trying to start conky, pypanel and feh after openbox has loaded. Login manager is slim.
autostart.sh
#!/bin/bash
. $GLOBALAUTOSTART
eval `cat $HOME/.fehbg` &
(sleep 2 && pypanel) &
(sleep 2 && conky) &
.xinitrc (furthermore i don't know if this file is even relevant towards openbox, because i start openbox from slim!?)
#!/bin/sh
exec openbox
/etc/slim.conf (if needed)
default_path ./:/bin:/usr/bin:/usr/local/bin:/usr/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
xauth_path /usr/bin/xauth
authfile /var/run/slim.auth
numlock on
login_cmd exec /bin/bash -login ~/.xinitrc openbox
sessions openbox
screenshot_cmd import -window root /slim.png
welcome_msg Welcome to %host
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
default_user arch0r
current_theme default
lockfile /var/lock/slim.lock
logfile /var/log/slim.log
Thanks in advance and best regards,
arch0ryou need to use
exec openbox-session
to use the ~/.config/openbox/autostart.sh file. -
AutoStart with flash player 9.0
How do I auto start a video with the flash player. In my code
for calling the swf file I've tried using all sorts of combinations
of the parameters autoStart, autorun, play, etc with either "1",
true, or ON as the value. I'm a typical MySpace user, and trying to
plug in video into my profile, but none of the auto start
combinations seems to work.
Thanks in advance!Yes, I tryed, and I still have this problem.
I also desinstall flash player and reinstall the 9.0.45 flash
player and I have no bug.
But it's really weird to have a bug with the 115 and not with
the 45, especially for a famous web site like youTube -
N73 no Autostart of Programms, only MusicPlayer
Hi there,
i have a little Problem with my N73. I don't know when problem occurs. My firmware version is 4.0750.31.2.1
The Problem is, that if i restart N73 the Musicplayer is started automatically and other Progs don't start. If i press TASK-Button only internal Taskmanager is opend and show that MusicPlayer is started.
Of course, some days ago all applications worked fine with the autostart.
I've tried PowerBoot to start, FS Caller, BProfiles and HandyTaskman... but it doesn't work.
I install all the applications in the phone internel memory.
Does anyone know this problem? What has caused it?
Best RegardsTry hard reset.
V4 firmware can't use autostart applications unless you use hard reset first.
Feel free to hit the KUDOS button if you think I deserved it......... -
[Solved]conky autostart link using kdemod4.3x
I followed the arch wiki to install conky and the config works fine. The wiki says to autostart conky $ ln -s usr/bin/conky ~/.kde/share/autostart/conkylink. But I have .kdemod4 not .kde in my home directory. Trying the above link with ''.kdemod4" instead of ".kde" gave creating link /home/user/ ~/.kdemod4/share/autostart/conkylink "no such file or directory"
Looking at ~/.kdemod4>ls -aF shows ./ ../ Autostart/ cache-myhost@ share/ socket-myhost@ tmp-myhost@. Autostart is an empty dir. $ cd share shows apps/ config/ and kde4/ .
How do I create the correct conky link using kdemod4.3 to autostart conky? Or how to do same with SystemSettings > Advanced.>Autostart in KDE . Thanx:)
Last edited by lestoil (2009-08-17 21:10:37)Following another thread by 'pencuse' on 2008-05-12 under Desktop Environments suggested cd to ~/kdemod4/Autostart then ln -s /usr/bin/conky conky. Now @conky shows under ~/kdemod4/Autostart:).
Last edited by lestoil (2009-08-17 21:15:12)
Maybe you are looking for
-
Cannot delete photo where no Original File is available
I would like to delete some photos, I have discovered that the ones I am unable to delete do not have an original file associated with them, how can I delete these from within iPhoto I know I can go to the iphoto file and delete that but then I'm jus
-
Is it possible to dwnload a file from web with given URL into our local sap
Hi every Body! Is it possible to download a file from web with given URL into local PC with abap. thanks vikram.c
-
HT4479 I DID REDEEM WITH MY ID BUT STILL THEV WEB SITE ASKING THE REDEEM NUMBER FOR REGISTRATION
I did redeem with itune card into the itune store under my log in data but the web site still asking the the redeem number and giving that the redeem number I used is used before. my redeem number is :XXMP6KZK5FPLCTF6. please help.
-
Hi, I am in the process of trying to create a horizontal navigation bar, and I am using an unordered list. The code I am using is OK until I try to apply display:inline to the ul or the li. As soon as I do this, the whole thing disappears. If I try t
-
Why do my external hard drives not free space when I delete things?
I have a Macbook Pro running Lion 10.7. I have a problem where my external hard drives tend not to free up space when I delete items from them. I have been resorting to regularly reformatting my drives for the pen drives, but now it is happening with