Autotrace and explain plan just show a green dot

When I click on the AUTOTRACE and the EXPLAIN PLAN tabs in SQL Developer all I get is a green dot. I do have PLUSTRCE roll defined to my signon. I am running SQL DEVELOPER 1.5.1 on Windows XP Professional Patch 3.

You must first click Explain icon or Autotrace Icon to generate them before you can check under the tab.

Similar Messages

Saving/exporting autotrace and explain plan

Is it at all possible to export or save the explain plan and/or autotrace information from Oracle SQL Developer to text?

You must first click Explain icon or Autotrace Icon to generate them before you can check under the tab.

Why the content of the Explain Plan not show out?

Why the content of the Explain Plan not show out?
I am using Oracle 11g.
I already ran the utlxplan.sql sctipt and I also set serveroutput on.
SQL> set autotrace on
SQL> EXPLAIN PLAN FOR SELECT*FROM DEMO_TABLE WHERE OWNER='HR';
Explained.
Elapsed: 00:00:00.67

When you say:
My release 10.2 database display the Explain Plan automatically.
How to make 11.1.0.6 Oracle database to display the Explain Plan automatically.What do you mean? Specifically, what commands are you executing in the 10.2 database, that displays the execution plan "automatically"?
Are you saying that if you execute the same command in 11.1.0.6, you don't get a similar result? What happens? Do you get an error?
For both the 10.2 case and the 11.1.0.6 case, post the full output of the commands you're executing, and the result you are seeing.
Then, maybe someone can help you.
When you post the output, please encapsulate it in a pair "code" tags, which is the word "code" without the quotes, surrounded by a pair of curly braces {}.
When you do this correctly, the output looks like:
This is output from my execution plan run.and is much easier to read.
Don't be afraid to use the preview tab to see if your message will be posted with the correct formatting.
-Mark

Hi when i run this in toad for explain plan its showing an error ORA_22905

hi when i run this query in toad for explain plan its showing an error ORA_22905 cannot accesss rows from an non nested table item can anyone help me out
SELECT
DISTINCT SERVICE_TBL.SERVICE_ID , SERVICE_TBL.CON_TYPE, SERVICE_TBL.S_DESC || '(' || SERVICE_TBL.CON_TYPE || ')' AS SERVICE_DESC ,SERVICE_TBL.CON_STAT
FROM
TABLE(:B1 )SERVICE_TBL
WHERE
CON_NUM = :B2
thanks

Note the name of this forum is SQL Developer *(Not for general SQL/PLSQL questions)* (so for issues with the SQL Developer tool). Please post these questions under the dedicated SQL And PL/SQL forum.
Regards,
K.

I tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it doesnt show up on my computer

i tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it doesnt show up on my computer

Hi there starbaeza,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
-Griff W.

When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing

When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing happoned

First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem.

Hi there can anyone help. I am connected to the internet by ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no internet connection. the other wireless laptop in my flat works well.

Hi there can anyone help. I am connected to the Internet by Ethernet but my connection keeps timing out and my network diagnostics shows all green and network connection ok but still no Internet connection. the other wireless laptop in my flat works well. Could the other wireless laptops being used in my flat be affecting my connection. what can I do to get connected, keep connected. Thanks for any ideas out there.

My network connected for a few hours then went back to timing out. I have not changed anything. However there four additional laptop users in my family who do not seem to be having any problems using their wireless connection. Could their film and music downloads be causing the timing out of my connection and if so is there a way I could prioritizes my computer or limit their use?

My macbook air won't turn on.. last night it was still working properly... when i woke up this morning, i went to turn it on but it didn't respond..i tried plugging the charger and the lightning cord showed a green light which is normal when charging..

my macbook air won't turn on.. last night it was still working properly... when i woke up this morning, i went to turn it on but it didn't respond..i tried plugging the charger and the lightning cord showed a green light which is normal when charging..i tried to open the macbook air again but nothing happened.. no fans, no chimes, no light in the laptop showed..what should i do? please help..thank you

Welcome to Apple Support Communities
A green light means that your battery is full or that it can't be detected. If you can't start up the Mac, probably your logic board or battery aren't working.
Take the MacBook to an Apple Store or reseller to get your battery or logic board replaced. If the MacBook is in warranty, this repair will be free

My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what can I do to start my iPad?

My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what else can I do to start my iPad?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Haw do i put evry thin back on my ipod as i accadently wiped evry thin off and now it just shows a screen with the lead and itune bubble

haw do i get my ipod 2 work after i accedently wiped evry thin off and now it just shows a screen with the lead and a itunes bubble

dennisfromabertillery wrote:
haw do i get my ipod 2 work after i accedently wiped evry thin off and now it just shows a screen with the lead and a itunes bubble
Connect to your computer, fire up iTunes and do a Restore: From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore.

Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks

Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks

There is an issue with facetime at the moment http://www.idownloadblog.com/2014/04/17/facetime-connectivity-issues-reaching-ma ny-ios-users/

Apple TV hanged and is now just showing the apple logo

Guys,
My aTV2 just hanged.
I tried a reset but now she is hanged on the boot and is now just showing the Apple Logo.
I tried another reset by pressing Menu+Down but again now I'm back on the boot and just showing the Apple Logo.
aTV2 LED is blinking.
Any idea on how to do this?
Thanks,

Have you unplugged from power and restarted?
If so, get a micro USB cable, hook it up to a computer with that cable alone, fire up iTunes and do a restore of the AppleTV firmware.

How to set autotrace to explain plan ONLY

Hi,
I would like to see explain plan for a long running statement.
Now if I do following:
set autotrace on explain
UPDATE ......-- my statement
I get the plan, but the rows are updated also :-(
Is there a way to tell ORACLE, please show me the explain plan but dio not execute the statement?
Thanks

ONLY FOR queries you can use
set autotrace traceonly explain
And actually query isn't executed. For other DML you cannot use that.
The other way can be explaining the query and then selecting the plan_table output:
SQL> explain plan for update t set code = 3;
Explained.
SQL> SELECT * FROM table(DBMS_XPLAN.DISPLAY);
PLAN_TABLE_OUTPUT
Plan hash value: 931696821
| Id | Operation          | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | UPDATE STATEMENT   |      |     3 |     9 |     3   (0)| 00:00:01 |
|   1 | UPDATE            | T    |       |       |            |          |
|   2 |   TABLE ACCESS FULL| T    |     3 |     9 |     3   (0)| 00:00:01 |
Note
PLAN_TABLE_OUTPUT
   - dynamic sampling used for this statement
13 rows selected.
SQL> see http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_xplan.htm
Gints Plivna
http://www.gplivna.eu

Explain Plan not showing correct results.

Hi Gurus,
Please help me to understand below issue.
Whenever I am doing explain plan on any of the sql statements it says as explained but when retriving the explain plan output it shows same results again and again.
DB - 11gR2 Stand alone
ASM - Configured.
OS - RHEL 6.2.
SQL> select count(*) from t2114;
COUNT(*)
639292
SQL> explain plan for select count(*) from t2114;
Explained.
SQL> @?/rdbms/admin/utlxpls.sql
PLAN_TABLE_OUTPUT
Plan hash value: 1497650422
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 6634 | 524K| 2993 (19)| 00:00:01 |
| 1 | SORT ORDER BY | | 6634 | 524K| 2993 (19)| 00:00:01 |
| 2 | TABLE ACCESS BY INDEX ROWID| T2210 | 6634 | 524K| 2947 (17)| 00:00:01 |
|* 3 | INDEX RANGE SCAN | T2210_T | 6842 | | 108 (22)| 00:00:01 |
Predicate Information (identified by operation id):
3 - access("T2210"."C490008000"=:SYS_B_0 AND "T2210"."C490009100"=:SYS_B_2
AND "T2210"."C301363300"=TO_NUMBER(:SYS_B_1))
16 rows selected.
SQL> explain plan for
2 SELECT T2114.C1 FROM T2114 WHERE ((T2114.C1000000001 = :"SYS_B_0") AND (T2114.C536871442 = :"SYS_B_1") AND (T2114.C536871477 = :"SYS_B_2") AND ((:"SYS_B_3" - T2114.C3) >= :"SYS_B_4") AND ((:"SYS_B_5" - T2114.C3) <= :"SYS_B_6") AND (T2114.C1000000217 LIKE :"SYS_B_7") AND (T2114.C536871478 < :"SYS_B_8")) ORDER BY C1000000161 DESC, :"SYS_B_9" ASC;
Explained.
SQL> SELECT * FROM TABLE(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 1497650422
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 6634 | 524K| 2993 (19)| 00:00:01 |
| 1 | SORT ORDER BY | | 6634 | 524K| 2993 (19)| 00:00:01 |
| 2 | TABLE ACCESS BY INDEX ROWID| T2210 | 6634 | 524K| 2947 (17)| 00:00:01 |
|* 3 | INDEX RANGE SCAN | T2210_T | 6842 | | 108 (22)| 00:00:01 |
Predicate Information (identified by operation id):
3 - access("T2210"."C490008000"=:SYS_B_0 AND "T2210"."C490009100"=:SYS_B_2
AND "T2210"."C301363300"=TO_NUMBER(:SYS_B_1))
16 rows selected.

Hi Dom,
Thanks for your immediate response.
I am getting two values for PLAN_TABLE. Please let me know if we need to drop any of them??
SQL> SELECT *
FROM all_objects
WHERE object_name = 'PLAN_TABLE'; 2 3
OWNER OBJECT_NAME SUBOBJECT_NAME OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS T G S NAMESPACE EDITION_NAME
PUBLIC PLAN_TABLE 5127 SYNONYM 17-SEP-11 17-SEP-11 2011-09-17:09:47:47 VALID N N N 1
ARADMIN PLAN_TABLE 219426 219426 TABLE 07-APR-13 07-APR-13 2013-04-07:23:01:12 VALID N N N 1

EXPLAIN PLAN not showing no of records

Rows column in the TKPROF output shows zero columns. The same works fine at sqlplus level, when autotrace set to ON.
Explain plan looks like below:
Rows Execution Plan
0 SELECT STATEMENT GOAL: ALL_ROWS
0 WINDOW (SORT)
0 HASH (GROUP BY)
0 MAT_VIEW ACCESS (BY INDEX ROWID) OF 'FII_AR_NET_REC_BASE_MV'
(MAT_VIEW)
0 NESTED LOOPS
0 MERGE JOIN (CARTESIAN)
0 TABLE ACCESS (FULL) OF 'FII_AR_SUMMARY_GT' (TABLE
(TEMP))
0 BUFFER (SORT)
0 INLIST ITERATOR
0 TABLE ACCESS GOAL: ANALYZED (BY INDEX ROWID) OF
'FII_TIME_STRUCTURES' (TABLE)
Can someone help me here ?
Thanks.

Hi,
it's becuz of when u execute query twice its no I/O .data are already in buffer pool.
Thanks
Reena

Autotrace and explain plan just show a green dot

Similar Messages

Maybe you are looking for