AutoUpdate/Ati Catalyst Broken!
AutoUpdate/Ati Catalyst Broken!? When using AutoUpdate here are some things I had to do to get it working:
) installed standard Creative drivers for my X-FI Titanium 2.7.007
it worked
2)? installed ATI Catalyst 9.0
it stopped working.
3) by mistake I let Windows Update install its WHQL Creative driver
AutoUpdate started working
used the other shortcut for AutoUpdateA.exe to get updates for Creative products in windows 7 64, and it worked everytime to reinstall the Creative 2.7.007
4) three weeks later I installed Catalyst 9.2 drivers, and immediately after reboot, AutoUpdate is broken.
Windows 7 Action Center reports errors with Creative AutoUpdate.
If I delete Creative drivers using CTZAPP, Windows Update upon reboot will install its own update to Creative's drivers......... I reinstall Creative 2.7.007 and Creative AutoUpdate still works.
5) installed ATI Catalyst and it is broken again. The Catalyst installation breaks it everytime. Reinstalling Windows Update version of Creative drivers, uninstalling those and installing Creative's several times usually fixes AutoUpdate. Within a few days, Autoupdate will be broken.
Anybody else have the issue with Catalyst 9.0 to 9.2 and Creative AutoUpdate?
Keep in mind, this is not my "new cause" of the week. I just did a clean format a week or so ago, and I am trying to duplicate the problems others are having with AutoUpdate. About 40-45% of users have ATI cards I would guess and I am trying to figure out if this is a common thing with about half of the Creative users. We install Creative drivers and go along for a few weeks, as many people always say, and then something goes wrong.......A new Catalyst is released about once a month or every six weeks.
#Re: AutoUpdate/Ati Catalyst Broken!B <div class="lia">"" try and just uninstall the CCC (Catalyst Control Center) and not the actual video drivers. Its the CCC (the little red "ATI" box in your task manager on the lower right) that is causing this problem. You will still have accelerated video with the drivers installed but not the special ATI utility to configure them. Use the built-in Windows 7 advanced graphics utility when you right click on the desktop (right-click and choose "Screen Resolution"). Inside that window is a link called "Advanced settings" which will let you do the same functions as the CCC does without the CCC's interference.
I hope this hel
ps.
Well this is not a good solution as you will loose advanced settings for your graphic card.
Similar Messages
-
[SOLVED] ATI Catalyst / Xorg issue with Multihead (3monitor)
i'm having problems for a long time, with different versions of the ATI Catalyst driver and Xorg,
right now i'm using this versions,
catalyst-hook 11.2-2
catalyst-utils 11.2-1
lib32-catalyst-utils 11.2-1
xorg-server 1.9.4.901-1
xorg-server-common 1.9.4.901-1
xorg-server-utils 7.6-2
the catalyst package are from the catalyst server recommended by the Arch Wiki
http://catalyst.apocalypsus.net/repo/catalyst/x86_64
the problem that i have is that when i try to pass from one monitor to another, when
i pass to the 3rd one the X crashes, this happen always with the same monitor no matter what.
here is the backtrace from the startx logs,
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x49f788]
1: /usr/bin/X (0x400000+0x60349) [0x460349]
2: /lib/libpthread.so.0 (0x7f28028b7000+0xf150) [0x7f28028c6150]
3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f27fecf4000+0x86ffff) [0x7f27ff563fff]
4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f27fecf4000+0x86fb5d) [0x7f27ff563b5d]
5: /usr/bin/X (0x400000+0x13bce2) [0x53bce2]
6: /usr/bin/X (0x400000+0x13be31) [0x53be31]
7: /usr/bin/X (0x400000+0x13a880) [0x53a880]
8: /usr/bin/X (miPointerUpdateSprite+0x18c) [0x45871c]
9: /usr/bin/X (0x400000+0x5892d) [0x45892d]
10: /usr/bin/X (0x400000+0x164266) [0x564266]
11: /usr/bin/X (mieqProcessDeviceEvent+0x172) [0x49ef52]
12: /usr/bin/X (mieqProcessInputEvents+0xcc) [0x49f08c]
13: /usr/bin/X (ProcessInputEvents+0x9) [0x469969]
14: /usr/bin/X (0x400000+0x2cf73) [0x42cf73]
15: /usr/bin/X (0x400000+0x2131e) [0x42131e]
16: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f2801837dcd]
17: /usr/bin/X (0x400000+0x20ec9) [0x420ec9]
Segmentation fault at address (nil)
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
i wanted to know if there is any official forum / bug tracker of amd/ati where report this bug,
or if one of you had this kind of problem before and can give me a hand to resolve this, i would be grateful.
here is the ati report about the system info,
http://pastebin.com/jU73mU4W
http://ideone.com/mcISC
thanks in advance.
regards.
Last edited by hord (2011-07-10 20:26:12)solved!
since the cursor used through the proprietary catalyst driver have issues, use instead the SW cursor,
Section "Device"
Option "SWCursor" "true"
EndSection
[0] http://ati.cchtml.com/show_bug.cgi?id=86
[1] http://ati.cchtml.com/show_bug.cgi?id=117
[2] http://phoronix.com/forums/showthread.p … post209030
Last edited by hord (2011-07-10 20:25:23) -
Error in installing ATI catalyst control center after formatting my laptop
please see this thread. thankyou
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/error-in-installing-ATI-catalyst-control...Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500
-
Hate to ask for help, but can't find anything from google. Also sorry if this is the wrong place to post it. Anywho, I'm having trouble installing ATI Catalyst. When I installed Arch I installed the oss drivers, but I can't play any resource heavy games (like Urban Terror). If there's another way o fix it without installing Catalyst, that's cool to.
Anyway, when I do pacman -S catalyst I get:
resolving dependencies...
looking for inter-conflicts...
:: catalyst-utils conflicts with libgl. Remove libgl? [Y/n] y
error: failed to prepare transaction (could not satisfy dependencies)
:: ati-dri: requires libgl>=7.2
I'm not exactly sure how I should take care of that. Do I need to remove everything installed by the OS driver or what?Alright so I think I've got it good.
http://crunchbanglinux.org/pastebin/176 - xorg.conf
I removed libgl and xf86-video-ati, thats all the OS driver comes with, right? Tryin' to make sure I have everything cleaned up. ;o -
T500 ATI Catalyst Control Center cannot be started
I have some troubles in opening the ATI Catalyst Control Center.There was a window poped out saying that ATI Catalyst Control Center cannot be started because the currently active GPU is not supported. I have already reinstall this drive and the graphic drive. But the problem is not solved. I am wondering what could I do now?
Right click on the battery in the task bar and make sure your Switchable graphics are set to Performance, if it is in energy savings the ATI control panel will not function, you need to use the Intel graphics setup instead.
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52 -
I searched for this problem with this board in this forum but didn't find anything. I just upgraded the driver for my built by ATI 9600XT to Catalyst 4.9 without the .NET Framework thing from Catalyst 4.4. I tried running Aquamark and got a reboot both times I tried it. The first time was about 30 seconds in, the second time was about 5 seconds in. I re-installed 4.4 and it works fine. Has anyone else had this exact problem? If there's already a post on this, please direct me. Thanks in advance for any advice you can give me.
By the way, it's not an overheat or power supply problem as I have plenty of fans and a somewhat competent power supply. Overdrive was not activated either. Everything in the system is at stock speeds. This is the first time I've ever had a spontaneous reboot andI built this PC last December. I can't think of anything other than the driver that could cause this.Here's the verdict. I got crashes that caused complete reboots and crashes that only crashed back to the desktop and caused the error report thing to come up with both the ATI Catalyst 4.9 Driver and the Omega Driver with fastwrites enabled and disabled with AGP at 8X. I knew that lowering AGP to 4X fixed a lot of other people's problems, but I was hesitant to try it since I had always been rock stable. Based on the adivce in this thread, I lowered AGP to 4X and Aquamark 3 finished. However, I got a score of 30,436 at 30.44 fps where I used to get 31,273 at 31.27 fps with Catalyst 4.4 AGP X8 Fastwrites on. I know that this is very minor an I will see no real world difference, but an "upgraded" driver should not cause decreased performance or require the user to use less aggressive settings, shame on ATI.
McGeyser, I've been playing for about 12 years I guess. Unfortunately for me now, I didn't force myself to learn right-handed. What's wierd is that I'm right handed for most things, but I do write, eat, shoot a slingshot, play guitar, and brush my teeth left handed.....59 reissue....nice -
ATI Catalyst /displays/properties/graphics controller
First, I have successfully installed my ATI video card and have downloaded all of the needed updated drivers.
However, I am receiving the following warning message: The ATI Catalyst Control Center is not supported by the
driver version of my enabled graphics adapter the ( Intel(R) 82845G/GL/GE/PE/GV) graphics controller. It goes on to say please update your ATI graphics driver. Or enable your ATI using the displays manager which, is located in the "ATI Catalyst Control Center".
I've gone to the ATI Catalyst Control Center. There I find basic and advanced settings. I tried using the basic step by
step easy set up wizard, and quick settings. I could not get past step one on either one. This wizard told me it was to convert a video file to a differn't video format. My question is would converting a video file to a differn't video format fix the driver version and graphics adapter? Or do I maybe need to install a differn't graphics adapter/controller?Please stay with your other post.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
ATI Catalyst Install Manager and catalyst Control Center Help
I just run the Windows 7 Upgrade
advisor report and it said that I should uninstall the ATI Catalyst Install Manager and Catalyst Control Center then reinstall after upgrade..
Could someone direct me where I might t find these programs for Windows 7You must not do this. Just continue upgrade installation.
On my Satellite I got the same message but I have simply continued with upgrade.
At the end everything went fine. -
please how can i reinstall ATI catalyst install manager which i unistall mistakenly?
Download it from AMD archive and reinstall. Sometimes cpp runtime is needed.
Regards
Milos -
Arch linux doesn't boot after installing AMD ATI Catalyst
I have a laptop which has a integrated graphic card intel 4th generation (4600) and an AMD ATI R9 m265x (hybrid Intel/AMD graphics card) so I have just installed AMD ATI Catalyst proprietary ones by following
AMD Catalyst ArchWiki.
I have used "Installing from the unofficial repository" method so in my pacman.conf I have added below entry for [catalyst-stable]:
[catalyst-stable]
Server = http://catalyst.wirephire.com/repo/catalyst/$arch
## Mirrors, if the primary server does not work or is too slow:
#Server = http://70.239.162.206/catalyst-mirror/repo/catalyst/$arch
#Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/catalyst/$arch
#Server = http://mirror.hactar.bz/Vi0L0/catalyst/$arch
Then I have update pacman's database and install below packages:
catalyst-hook
catalyst-utils-pxp
lib32-catalyst-utils-pxp
(No need to install catalyst-total-pxp as I have installed catalyst-utils-pxp)
After installing it, I have configured the driver, configuring X using below command:
# aticonfig --initial
In order to use PowerXpress support I have installed catalyst-utils-pxp package plus additional lib32-catalyst-utils-pxp.
To perform a switch into Intel's IGP I have also installed the mesa-libgl package and Intel's drivers: xf86-video-intel and intel-dri .
I have enable the automatic update by enabling the catalyst-hook.service with below commands since it automatically rebuilds the fglrx modules while the system shuts down or reboots (so I haven't to do it manually each time kernel is updated using Catalyst-generator):
# systemctl enable catalyst-hook
# systemctl start catalyst-hook
And finally I have blacklisted radeon module by creating "/etc/modprobe.d/blacklisted.conf" file which content is:
blacklist radeon
and also I have ensured that fglrx line is added in "/etc/modules-load.d/Catalyst.conf" file.
To avoid problems, I have rebuilt the fglrx module by doing (I know it is not necessary as it is done by catalyst-hook):
catalyst_build_module all
Once I reboot, arch linux does not boot. Last lines printed out are below and then it freezes:
Starting temp files linker to catalyst...
Starting Catalyst event Daemon...
[ OK ] Started Catalyst event Daemon
Starting Catalyst's fglrx kernel' module builder...
[ OK ] Started temp files linker for catalyst.
[ OK ] Started Catalyst's fglrx kernel' modue builder.
[ OK ] Started gnome Display manager.
[ OK ] Started Network manager.
[ OK ] Reached target Multi-User system.
[ OK ] Reached target Graphical Interface.
[ OK ] Reached target Network.
I have tried to put nomodeset as a kernel parameter but it does not work. Also, after reading ArchWiki, I have noticed that it is recommended to don't do this as I am using catalyst-utils-pxp because intel driver needs it so I have removed nomodeset parameter from kernel but It continues not working.
Any ideas?
Package versions:
Kernel version 3.17.6-1-ARCH
catalyst-hook 14.12-1
catalyst-utils-pxp 14.12-1
lib32-catalyst-utils-pxp 14.12-1
xorg-server 1.16.2.901-1
xf86-video-intel 2.99.916-3
Last edited by toni (2014-12-13 19:38:38)FInally I managed to boot arch linux.
I had to downgrade xorg-server from 1.16.2.901-1 to 1.15.2-1.
It seems there is a problem with Catalyst 14.12-1 and xorg-server 1.16.2.901-1.
Also I had to replace desktop manager from gdm to lightdm as gdm raises segmentation faults using xorg-server versions 1.16.2.901-1 and 1.15.2-1.
Finally I had to add an entry in pacman.conf:
[xorg115]
Server = http://catalyst.wirephire.com/repo/xorg115/$arch
## Mirrors, if the primary server does not work or is too slow:
#Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/xorg115/$arch
#Server = http://mirror.hactar.bz/Vi0L0/xorg115/$arch
Then performs following actions:
1) # pacman -Syuu catalyst-hook catalyst-utils-pxp
2) Uninstall all the packages xf86* such as xf86-video-intel, xf86-input-evdev, xf86-input-synaptics, etc.
3) Install the packages uninstalled in step 2 and install them again using xorg115 repo, for example, # pacman -S xorg115/xf86-video-intel xorg115/xf86-input-evdev xorg115/xf86-input-synaptics
I have put a comment here.
Last edited by toni (2014-12-14 12:31:29) -
ATI Catalyst 9.2 and "Incompatible display adapter has been disabled."
Hi,
I have this issue... on 3 GPUs. Only one is working. 2 x 3870x2 in crossfire / Vista x64 SP1
I tried everything possible : uninstall all ATI software before, clean registry, delete files, temporary files, many uninstall and reboots, trying different settings in BIOS . Same issue.
This time I choose to install 9.2 drivers only (without Control Center), but the result is the same.
The problem appears since v8.11, but I was able to install at the end by cleaning / reinstalling many times.
v8.12, v9.1, v9.2 are impossible to install correctly on my system. I'm very disapointed.
I've been waiting about 6 month for 8.10 to have stable drivers...
Maybe installing ATI drivers should be proposed to Olympic Games category...
I asked to ATI if they have a tool to clean all previous drivers, and they suggested this link :
https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=1447
Look at the utility cat-uninstaller.exe date : 10/08/2003 !!!
It's possible that the problem comes from old drivers, but I refuse to format / reinstall the system each time ATI release a new driver. I did that for 8.12 and I had the same issue.
For users who have this problem : OPEN A TICKET TO ATI CUSTOMER CARE !!!
http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=31625
That's the olny way to solve this issue.
My system below :
AMD Phenom 9950 BE / Sunbeam Core-Contact Freezer / ASUS M3A32-MVP DELUXE-WIFI-AP (AMD 790FX/SB600 - BIOS v1406) / OCZ Reaper HPC Edition 8Go ( 4*2Go ) PC8500 1066MHz Cas 5-5-5-18 / Quad CrossfireX : dual MSI R3870X2-T2D1G-OC - ATI Catalyst 8.11 / RAID0 : 2x Samsung - Spinpoint F1 - 320 Go 7200 rpm SATA II 16 Mo cache / PSU : Thermaltake - TOUGHPOWER 1200W / VISTA x64 SP1I did tests on my second system :
System 2 :
AMD Athlon X2 6400+ / ASUS M3A79-T Deluxe (AMD 790FX/SB750) / 8GB DDR2 800MHz Corsair Doninator / RAID0 2x Samsung 200 Go SATA II
CrossfireX : 2x MSI RX3870-T2D512E-OC (v120 + v803) / ATI Catalyst 9.1 / Cooler Master Real Power M620 (620W/efficiency >80%) / VISTA x64 SP1
On this system :
Catalyst 9.1 working and Crysis Warhead too
Catalyst 9.2 installation is OK, but :
- Crysis Warhead hang at 85% when a level is loaded
- Crysis v1.2.1 load correctly, but hang after 1 minute
- I noticed that when I lanch CPU-Z 0.3.2 I have on "Bus Interface"
-card 1 : PCI-E x16 2.0@ x16 2.0
-card 2 : PCI-E x16 2.0@ x16 (in catalyst 8.10, both are @2.0)
Uninstall 9.2 and visual c++ x64, reboot, install 9.1 => 2 x GPU disabled error 43 !!!
Going back to 8.10 : it's the last working stable revision from MSI.
For users who use MSI Live update, and drivers from MSI : what are the last ATI Catalyst revision drivers furbished by MSI ?
I would like to have feedback (vista x64, crossfirex).
Thanks -
ATI Catalyst 8.5 Proprietary Linux Display Driver released
New ATI Catalyst™ 8.5 Proprietary Linux Display Driver was released the day before yesterday and according to release notes it has many improvements.
New Features
This release of the Catalyst™ Linux software driver introduces Mipmap Detail, Catalyst A.I., and AA Filters in the 3D ORCA page of the Catalyst™ Control Center Linux Edition.
Resolved Issues
* The following section provide a brief description of resolved issues with the latest version of the ATI Catalyst™ Linux software suite. These include:
* Support for video playback on the second head in dual head mode is now available. Further details can be found in topic number 737-26985
* Unresolved symbols in Xorg log under RHEL 4u6 32 and 64 bit no longer occur. Further details can be found in topic number 737-34284
* The desktop background color is no longer displayed incorrectly when using xcommgr. Further details can be found in topic number 737-34285
* Change VT no longer fails when kernel module is not loaded. Further details can be found in topic number 737-34286
* Switching to the virtual terminal multiple times no longer results in X displaying corruption. Further details can be found in topic number 737-34287
* Catalyst Control Center: The Preference page is now localized for all supported languages. Further details can be found in topic number 737-34275
* The Linux kernel module is no longer installed to wrong location if the Linux kernel is updated. Further details can be found in topic number 737-34288
* Random system hangs no longer occur when calls to the ATI driver are made from Ring3. Further details can be found in topic number 737-34289
* X window no longer fails to respond when GoogleEarth is maximized. Further details can be found in topic number 737-34290
* A segmentation fault no longer occurs when running SPECViewperf on systems containing an ATI FireGL V5100 series product and running SUSE 10.3 x86. Further details can be found in topic number 737-34276
* Enabling Composite extension no longer displays 8x AA for graphic cards that do not support 8x AA under the Ubuntu 7.10 operating system. Further details can be found in topic number 737-34291
* Display corruption is no longer noticed at logon when compiz is enabled. Further details can be found in topic number 737-34292
* Launching the glxgears application no longer results in segmentation faults. Further details can be found in topic number 737-34293
* GoogleEarth: Launching the application in horizontal mode on a system running X no longer results in corruption being noticed. Further details can be found in topic number 737-34293
* Specviewperf 8.1 64 bit version: Segmentation faults no longer occurs on IGP systems. Further details can be found in topic number 737-34294
* Maya 2008: Moving the render window no longer results in the operating system failing. Further details can be found in topic number 737-34295
* Glxgears corruption is no longer noticed in big desktop mode. Further details can be found in topic number 737-34296
Known Issues
* The following section provides a brief description of known issues associated with the latest version of ATI Catalyst™ Linux software suite. These issues include:
* Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-29578
* Bandwidth corruption may be noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
* SECAM, NTSC or PAL signal changes when using aticonfig or Catalyst Control Center but does not apply to the TV display output. Further details can be found in topic number 737-34297
* Running X server without a window manager may result in the X server flashing green for a moment, going black, and the computer becoming unresponsive. Further details can be found in topic number 737-34299
* Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-34298
* Connecting a CRT display device to a system containing an ATI Mobility Radeon X1600 product may result in the display device flashing multiple times or failing to display an image when attempting to launch the Catalyst Control Center. Further details can be found in topic number 737-34300
* Corruption may be noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-34301
* Quake 3 Arena (demo): Segmentation faults may occur when attempting to play the game. Further details can be found in topic number 737-34302
* Specviewperf: Launching the application may result in the Linux operating system failing to respond. Further details can be found in topic number 737-34282
* Opening a terminal and running semi-automated DPPT tests via lnxtest.sh may result in the operating system failing to respond. Further details can be found in topic number 737-34283
* A segmentation fault may occur when running SPECViewperf on systems containing an ATI FireGL V5100 series product and running SUSE 10.3 x86. Further details can be found in topic number 737-34319
* FGL_GLXGEARS or GLXGEARS: X may fail to respond when launching either of the applications. Further details can be found in topic number 737-34316
* Maya 2008: Various comparison failures may be noticed. Further details can be found in topic number 737-34277
* The X Server may fail to reset clearly when AIGLX is enabled. Further details can be found in topic number 737-34317
* DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-34278
* SPEC Viewperf 8.1: A performance drop may be noticed when running the application under Linux. Further details can be found in topic number 737-34279
* Maya2008: The hardware render buffer may fail to render/display the image. Further details can be found in topic number 737-34280
* May2008: The hardware render Perl script may display an error message when rendering. Further details can be found in topic number 737-34281
I wonder when it will appear in Arch's repositoriesYea, it would be great as at Phoronix forums some people are reporting 10% performance increase in games
EDIT: Some release notes from AMD
New Features
This release of the Catalyst™ Linux software driver introduces UYVY and YUY2 pixel format support. This support provides interleaved stream support for video playback applications such as TVTime and MythTV.
Resolved Issues
The following section provide a brief description of resolved issues with the latest version of the ATI Catalyst™ Linux software suite. These include:
*Enemy Territory: Quake Wars: Playing the demo on a system running X no longer results in corruption being noticed. Further details can be found in topic number 737-35208
*Maya 2008: An incorrect colormap is no longer displayed for texture selector on systems running X. Further details can be found in topic number 737-35207
*Quake 3 Arena (demo): Segmentation faults no longer occur when attempting to play the game. Further details can be found in topic number 737-35206
*Quake3: Corruption is no longer noticed when changing the display resolution when the game is running. Further details can be found in topic number 737-35209
*SECAM, NTSC or PAL signal changes when using aticonfig or Catalyst Control Center and now gets applied to the TV display output. Further details can be found in topic number 737-34297
*Running X server without a window manager no longer results in the X server flashing green for a moment, going black, and the computer becoming unresponsive. Further details can be found in topic number 737-34299
*Corruption is no longer noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-34301
*Clock Gating is now supported and enable under the Linux operating system. Further details can be found in topic number 737-35191
*The desktop background color is no longer displayed incorrectly when using xcommgr. Further details can be found in topic number 737-35192
*Using the wrong delimiter in aticonfig --set-dispattrib=<disp>,<attr>, <value> no longer results in a segmentation fault. Further details can be found in topic number 737-35194
*Audio out is now functioning after the installation of the ATI graphics drivers for Ubuntu 7.10. Further details can be found in topic number 737-35196
*Bandwidth corruption is no longer noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
*Playing a video clip using mplayer with the Xv extension enabled no longer results in an error indicating that Xv could not find a free Xv port. Further details can be found in topic number 737-35198
*Corruption is no longer noticed when enabling Big Desktop on systems containing an ATI FireGL X1 series of product and running X. Further details can be found in topic number 737-35199
*Running the X server generations test no longer results in the operating system failing to respond or a Kernel panic to occur after first server generation on SuSE 10.3 64 bit. Further details can be found in topic number 737-35200
*Attempting to resize a 2D application window no longer results in poor performance being noticed when composing is enabled. Further details can be found in topic number 737-35201
*Screen flicker is no longer noticed after running amdcccle in X. Further details can be found in topic number 737-35202
*Corruption is no longer noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-35203
*Glxgears corruption is no longer noticed in big desktop mode. Further details can be found in topic number 737-35204
*Starting glxgears and/or fgl_glxgears no longer results in the gears failing to render on SuSE 10.2 x86_64. Further details can be found in topic number 737-35205
*FGL_GLXGEARS or GLXGEARS: X no longer fails to respond when launching either of the applications. Further details can be found in topic number 737-35210
Known Issues
The following section provides a brief description of known issues associated with the latest version of ATI Catalyst™ Linux software suite. These issues include:
*DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-35219
*Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-29578
*Bandwidth corruption may be noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI *Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
*Connecting a CRT display device to a system containing an ATI Mobility Radeon X1600 product may result in the display device flashing multiple times or failing to display an image when attempting to launch the Catalyst Control Center. Further details can be found in topic number 737-34300
*DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-34278
*Setting the Overscan to an invalid value may result in segmentation faults. Further details can be found in topic number 737-35211
*An incorrect error message may be returned when applying an unsupported TV geometry in a console terminal. Further details can be found in topic number 737-35212
*Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-35213
*An X segmentation fault may occur when launching SUZI/textured video. Further details can be found in topic number 737-35214
*Creating two successive connections may result in direct GL context to fail. Further details can be found in topic number 737-35215
*Moving the mouse or tapping a key may fail to close an OpenGL screen-saver and bring the user back to the x desktop. Further details can be found in topic number 737-35216
*The X Server may fail to reset clearly when AIGLX is enabled. Further details can be found in topic number 737-35217
*Opening a terminal and running semiautomated DPPT tests via lnxtest.sh may result in the operating system failing to respond. Further details can be found in topic number 737-35218
Last edited by Zibi1981 (2008-06-19 15:42:23) -
Satellite L350D-20D: ATI radeon 3100 with Ati Catalyst Control
i was instaled on my Satelite L350D 20-D graphic drivers from Toshiba website
But after instalaton i dont have Ati Catalyst Control Center i have ion my Program Files some Foler with instalation but this is some 0.2 MB ,,,
i have now this drivers :
http://driverscollection.com/?H=Radeon%20HD%203100&By=ATI&SS=Windows%20XP
Manufacturer:ATI
Hardware:ATI Radeon HD 3100
Software type:Catalyst Software Suite
Version:11.8
File Size:51.38Mb (53881048 bytes)
Released:16 Aug 2011
Uploaded:27 Aug 2011
Views:159
Downloads:55
System:
Windows XPWindows XP Media Center
Description:Catalyst Software Suite for ATI Radeon HD 3100
Package Includes:
Display Driver
OpenCL Driver
ATI Integrated Driver
Catalyst Control Center
Download ATI Radeon HD 3100 Catalyst Software Suite v.11.8
im not sure if its not t o `BIG` driver for this graph card..
cus its for Ati Radeon HD 3100 and in my Toshiba L350D 20-D i have Ati Radeon 3100 ....Hi
Here you can download the latest Catalyst software:
http://www.amd.com/us/products/technologies/amd-catalyst/Pages/catalyst.aspx -
ATI Catalyst Control Center is not loading with the latest drivers. Help!!!
I have installed latest ATI drivers from Lenovo 8.712. After that ATI Catalyst Control Center is not loading. The icon is present, when I click display properties. But when I click it, nothing happens. How can I downgrade to the previous version?
And another question: I have a docking station and 2 monitors. One of the monitors with DVI connection is working fine. Is there any way to disable laptop screen and enable second monitor through analog D-SUB.
Thank you in advance.Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500
-
ATI Catalyst 13.3 beta 2 Poisonous to Photoshop CS6
Last night I installed the new ATI Catalyst 13.3 beta 2 driver. The 13.2 betas had worked seemingly okay. But with 13.3 beta 2, Photoshop CS6 13.1.2 crashes in Advanced mode when any document is opened...
Faulting application name: Photoshop.exe, version: 13.1.2.0, time stamp: 0x50e86765
Faulting module name: atio6axx.dll, version: 6.14.10.12172, time stamp: 0x51423773
Exception code: 0xc0000094
Fault offset: 0x000000000118a67f
Faulting process id: 0x186c
Faulting application start time: 0x01ce232bdf156c88
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
Faulting module path: C:\Windows\system32\atio6axx.dll
Report Id: 2676a2f8-8f1f-11e2-bb85-005056c00008
I'm still trying things, to see if there are workarounds, or modes in which it works, but for now, my advice:
Avoid installing Catalyst 13.3 beta 2.
I'll follow up here when I learn more.
-NoelOne manifestation of this new driver version is that Photoshop CS6 now thinks there is an insane amount of VRAM...
This is a problem that showed up in Catalyst 12.10 and persisted through 13.1, then was miraculously solved in 13.2 betas. Now it has returned.
And from what I've been able to see during testing, it crashes Photoshop in all GPU accelerated modes, not just Advanced.
Here's what sniffer_gpu reports:
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 000000000029A888 has video RAM(MB): 2048
Device: 000000000029A888 has video RAM(MB): 2048
Vendor string: ATI Technologies Inc.
Renderer string: AMD Radeon HD 7800 Series
Version string: 3.0.12172 Compatibility Profile Context 12.100.17.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.2 AMD-APP (1124.2)
Return code: 3
After a crash I see this:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:12, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 12
Logical processor count: 24
Processor speed: 3458 MHz
Built-in memory: 49150 MB
Free memory: 43300 MB
Memory available to Photoshop: 44751 MB
Memory used by Photoshop: 95 %
Image tile size: 1024K
Image cache levels: 2
Photoshop crashed on 3/17/2013 at 1:06:00 PM (AllocateSharedGLResources)
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2 AMD-APP (1124.2)
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 2048 MB
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 7800 Series
Display: 2
Display Bounds: top=0, left=1600, bottom=1200, right=3200
Display: 1
Display Bounds: top=0, left=0, bottom=1200, right=1600
Video Card Number: 2
Video Card: Radmin Mirror Driver V3
Driver Version: 3.1.0.0
Driver Date: 20070808000000.000000-000
Video Card Driver:
Video Mode: 1600 x 1200 x 4294967296 colors
Video Card Caption: Radmin Mirror Driver V3
Video Card Memory: 0 MB
Video Card Number: 1
Video Card: AMD Radeon HD 7800 Series
Driver Version: 12.100.17.0
Driver Date: 20130314000000.000000-000
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1600 x 1200 x 4294967296 colors
Video Card Caption: AMD Radeon HD 7800 Series
Video Card Memory: 2048 MB
A complete reset of all preferences makes no difference - Photoshop still crashes with any GPU mode.
It also crashes Photoshop CS5.
-Noel
Maybe you are looking for
-
ASA IPSEC VPN Design Question; ARP Between ASA
I"ve a requirement to put two ASA between two sites. The second site has hosts within the same network as the first site (conflict of fundamental routing principles). Can you put an ASA inline between the router and distribution switch at each site,
-
Converting a C String to a LStrHandle
Hi All, I have a CIN which is currently inputting/outputting an error cluster. The Source message in that error cluster is a LStrHandle. I have a C String which is being passed back from a function that I want to insert into this Source message in th
-
Java.util.concurrent versions: Doug's Lea X J2SDK 1.5.0b31
B31 version of java.util.concurrent has a class named ScheduledExecutor. The new Doug Lea's code (in his web site) has no such class, but a new one named ScheduledThreadPoolExecutor. He says that we must use the new code, not the code that ships with
-
Controlling Vehicle with NXT Joystick
I made a joystick with the NXT kit. It is designed to control a two-wheel-drive car (which I am still designing; it is going to have two wheels attached to motors with a castor wheel in the back, like the tribot). I built the joystick with only one m
-
Error reading table in EDEXTASK (Data Exchange task)
Hello Experts, Move-in document for product(gas supply) has move-in date of 02.10.2008. I get an error message (see below) here, as of a result that the switch of 22-10-2008 cannot be billed. Error:-Error reading table in EDEXTASK (Data Exchange task