Autowrite to xmp is set - but when does it really happen?

Hi,
in my workflow, I need the xmp-sidecar files. Therefore, I have activated the "automatically write changes into xmp". Since the upgrade to 1.3 I noticed, that the changes are not written immediately into the xmp-files, but with a certain timelag. I do not understand, why. I cannot set this time anywhere - or I did not find the setting yet. Can anybody help me? For my workflow, it is important, that after I close Lightroom, all the changes are written in the xmp-files.
(Yes, sure I can do it manually, but I would prefer to be able to have the programm doing it automatically!). And yes, I do use version 1.3.1.
Thanks for help, happy shooting, Dirk

hello bdavis106, please refer to [[Find and manage downloaded files]].

Similar Messages

  • HT5361 Can I set the mail in osx 10.9.1, not when i first set, but now does not.

    Can I set the mail in osx 10.9.1, not when i first set, but now does not.

    I am not sure I understand you question, but if you are attempting to set up an iCloud email account, you can start in System Preferences >  iCloud > Account Details. Establishing the details of your iCloud (a.k.a. Apple) ID there automatically creates the account in Mail

  • I had to change my Apple ID. However, it won't change in my phone. I changed it in setting, but when it comes to downloading updates for apps or music, it won't update from my old Apple ID.

    However, it won't change in my phone. I changed it in setting, but when it comes to downloading updates for apps or music, it won't update from my old Apple ID. For instance, I had to change my apple ID from (for instance, "[email protected]") to something else ("[email protected]"). I changed it in settings to the new one, but when I go to update apps, my phone is still connected to "[email protected]"
    What should I do?

    In the Finder do a Get Info on one of those files & the folder it's in, report what it says for privileges.
    Oh, did you maybe change your short username/Home Folder's name?

  • I'm trying to isolate skin with a secondary layer and am successful.  I want to blur the skin to reduce blemishes but when doing so the blur and degrain sliders don't seem to have an effect. Can I apply a gaussian blur fx on just that secondary? Can't see

    I'm trying to isolate skin with a secondary layer and am successful.  I want to blur the skin to reduce blemishes but when doing so the blur and degrain sliders don't seem to have an effect. Can I apply a gaussian blur fx on just that secondary? Can't seem to figure this out.  Is there a better way to smooth skin?

    Here's an Adobe help page for isolating skin with suggestion on the use of the blur slider also:
    https://helpx.adobe.com/speedgrade/using/apply-secondary-color-corrections.html
    And here's one of the original creators of Iridas/SpeedGrade, Patrick Palmer, a six minute vid-tut on using secondaries (specifically in CS6 but this hasn't changed):
    http://tv.adobe.com/watch/learn-speedgrade-cs6/secondary-color-correction-in-speedgrade-cs 6/
    I'd note, the "blur" and "denoise" tools on the Secondary tab are more about smoothing the keying of the secondary ... they apply a bit of blur or de-noising to make the secondary smoother and cover over the odd pixel or three or four that don't "fit" the key of the secondary in the middle of something you're aiming for.
    In current SpeedGrade, I'd try using the Guassian Blur (Range) effect, and sample a good range of the skin tones.
    And a lot of people use Red Giant's "Cosmo" plug-in over in AfterEffects or Premiere Pro ... it's a tool designed specifically for working skin tones, dealing with blemishes, wrinkles, spots, and such.
    Neil

  • Installed Photoshop Elements 13.  Upon activation, get through sign in screen, but when doing serial number validation, validate goes round but does not validate.  Connect Later is only way out of screen.  How do I validate.  Checked account but product n

    How do one validate Photoshop 13. (Windows 8) Upon activation, get through to sign in screen, but when doing serial number validation, validate goes round but does not validate.  Connect Later is only way out of screen.  Checked account but product not listed.  Installed with serial number that was sent  by Adobe.  Have attempted numerous times at different times of the day.  On-line connection working.

    Have you bothered to do any research at all? Not every app was upgrade to 5.5. Those that weren’t will next be upgraded to CS6.
    Bob

  • TS1538 My ipod touch says disabled connect to itunes but when I do nothing happens.  Can somebody help me please

    but when I do nothing happens.  Can somebody help me please

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • My ipad says connect to iTunes but when I do nothing happens, this after it failed to restore.

    I installed multitouch on my iPad 2 before it was generally avaliable. Ever since thin I have been unable to update the software. I'd get  a "device is isn't eligible for the requested rebuild" error. I just bought "New iPad" last night, so I need to update the current one so that I can get my new one set up. I started folowing instructions in this forum to deal with the error. I opened xCode and tried to restore from there. But I got the same error... only now my iPad is wiped clean and it's showing the "connect to iTunes" image it showed when I first set it up.
    BUT when I connect it to iTunes nothing happens! Same deal with xCode.
    I can see my apps are still backed up in iTunes compleated a backup before this all started... but how do I get iTunes to "see" the ipad now?
    I'm on a Macintosh with the newest version of iTunes and OS 10.6.8

    So, I have managed to get my iPad to stop showing the "connect to iTunes" screen. I did this by plugging it in to my husband's PC and trying to restore from the backup I left there many many months ago.
    The restore FAILED error 3194 (I looked it up it's the same error as the one I got on my macintosh "device is isn't eligible for the requested rebuild"
    But the restore attempt mad the "connect to iTunes" screen go away, now it has 4.3.1 again with the special multitouch update.
    BUT I STILL CAN'T RESTORE! Why not? I've been searching all over the web and I can find nothing that helps.
    It's not like I jailbroke it... can anyone help me please?

  • My ipod is stuck in recovery mode i try to restore it but when it finishes nothing happens

    my ipod is stuck in recovery mode i try to restore it but when it finishes nothing happens

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Loading of Classes - How does it really happen?

    Hi.
    I've been fighting at this forum on the subject of a direct Java-to-machine code compiler.
    Maybe I'm wrong. Maybe not.
    I'd like someone to help me and answer the following question:
    Does the JVM load the entire classes extended (or not) by the Java Code? Here's an example:
    The program uses an instance of panel. No method to change the background color and the opacity of the instantiated panel is ever called. Would the JVM load those functions, creating pointers to their parameters, and waiting changes, or would it set the default background and opacity, without putting in the code something like
    "If param=1 then ...."?
    Sorry If I was not clear...

    What schell said, about a Class that is referenced in
    a class not loading, as I found out, if you have
    something like this:
    package mypackage;
    import somepackage.SomeClass;
    public MyClass
    SomeClass sc = null;
    public MyClass()
    public void someMethod()
    sc = new SomeClass();
    What this means is, when the MyClass is loaded, the
    JVM has the classloader of MyClass look for any
    imports, but does NOT require it to be instantiated
    (jschell correct me if I am wrong). Having built my
    own ClassLoader with tons of system.outs in it, as I
    see it happen, not until your MyClass someMethod() is
    called (from somewhere else nodoubt) will the JVM ask
    the ClassLoader of MyClass to define/resolve the
    SomeClass. However, when the MyClass is first loaded
    into memory (its bytecode), the import statements DO
    cause the JVM to get the Class references to any
    classes defined in the imports. Well first keep in mind that is has nothing to do with "import". The compiler creates a fully qualified name, and that is what is used for loading. "import" is gone once the JVM gets it.
    Second, as far as I know, the example you gave means that the classloader must interact somehow with SomeClass when it loads MyClass. It must at least verify that it can load SomeClass even if it doesn't load it. I believe that that means that it must load (and thus verify it) but it does not resolve any linkages. However, that would not be the same as the following code.
      package mypackage;
      import somepackage.SomeClass;
      public MyClass
        Object sc = null;
        public MyClass()
        public void someMethod()
          sc = new SomeClass();
    You should be able to verify this by adding a static initializer to SomeClass.
    First, the above issue, if you declare a
    variable, but never actually instantiate it, does the
    JVM still try to load the bytecode for the class of
    the variable? Depends on where the variable is declared.
    Also keep in mind that technically the JVM could load and resolve everything right off the bat. But it can't report errors in that process until it is supposed to. Because of that, I would suspect most if not all JVMs, defer loading until that actually have to do it. It would just make the implementation easier.
    Or only when it is actually instantiated
    (or used, such as System.out.println(SomeClass.class);
    which would mean any static methods of the class used
    in MyClass would cause the JVM to need the SomeClass
    bytecode as well). That doesn't sound right.
    Instantiating an object does cause some things to occur. One of the most obvious is that a constructor is called. Something in the constructor might cause another class to be loader. Or something in a non-static initializer.
    And if you have the following...
      public MyClass
        static SomeClass sc = new SomeClass();
    Then more needs to be resolved, and sooner, that with your other example.
    The other area I am a bit foggy on
    is when MyClass implements and/or extends other
    classes, when do those classes/interfaces bytecode
    get loaded? My guess is as soon as MyClass is loaded,
    if it implements or extends any interfaces or
    classes, those also must be defined/resolved by the
    ClassLoader before the MyClass can be instantiated.
    Part of the processing of loading MyClass is to load the parent entities. If that fails then MyClass fails.

  • New treemodel is set but view does not update?

    How does one refresh a view? I mean if I set another treeModel using setModel then how do I update this to the view instead of it displaying the original?
    It sets the new model and my debugging statements show it goes all through the setting up of the new information but doesn't move into the next step - display.
    I have tried validate(), setVisible(false) then setVisible(true), and repaint() but to no success. All I really want to do is refresh the view I think.
    I've read a few threads on this but haven't seen a resolution yet and am figuring when people solve it they don't post the solution just move on.
    Any advice would be very welcome at this stage.

    ahh solved, it was resetting back to the original treemodel again so no change. Thanks anyway to all the people I've queried on this one over the last few days. Your help has been appreciated.

  • I have the ipod nano (3rd gen.), Instead of updating my songs, it resetted my ipod to factory setting but when I reconnected the ipod it said to format but it won't format because the ipod is showing that it is syncing. what do i need to do?

    I went to update my songs but instead of updates, i lost everything.  I didn't know that I lost everything until I unplugged and went into my ipod.  It had been resetted to factory setting.  Well I reconnected to try again,, it tells me to format but it won't cause the ipod shows that it is trying to sync but it's not.  What should I do or is my ipod nano finally saying it's goodbye.

    Can you play the song in iTunes?
    If you can't the song file is probably corrupt and needs to be replaced.

  • When I try to delete an app that has not downloaded correctly, I do everything I'm suppose to do...hold down icon then it will shake and an x will appear to delete app but that does'nt even happen..how come I can't delete?

    Help! I can't seem to delete an apps that I got at the apps store. 4 games that said I do not have enough juice for it to download and says waiting.....ugh so ffrustrated

    There is a 20 MB limit on downloads with 3G and you have exceeded that limit.Download the apps in iTunes.
    Launch iTunes on your computer and go to the iTunes menu at the top of screen and from Store drop down to Check for available downloads. Click download (or whatever it says) in the main iTunes window on the right and let all four games download.
    Then connect your iPad to to your computer and sync the apps to your iPad. Don't forget to select them in the list under Sync Apps. After the sync completes - without disconnecting your iPad - uncheck the apps in iTunes to remove them and sync again.
    When you eject your iPad the apps should be gone with no more "waiting" icons on the screen

  • Internet works fine, but when doing anything on internet live, like updating steam, says can't connect to internet

    i use windows vista. Nothing live will work like updating steam after installation. Please help. Nothing has worked so far.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • ITunes 10.6.3 is in my downloads, but when I click nothing happens?

    I downloaded iTunes 10.6.3 because thats what I need to plug my phone in, but I click on the download after it's complete and it brngs me to my iTunes but nothings changed. What do I do I just need this update!!?

    I am having the same problem!!!!

  • I got a crash report that said the Flash plug in had crashed, but when the incident actually happened, the report said that "Silverlight" had crashed; how do I know where the problem is?

    Sorry. The crash report actually said that Quick Time had crashed, not Flash, but at the time the crash actually happened, the message said that "Silverlight" had crashed. I just want to know how I can tell where the problem is so that I can try to fix it.

    That is a legitimate Mozilla newsletter. As it says in the email:
    You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
    Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
    Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "

Maybe you are looking for