"Aux. Account Assignment 1" field in COEP is diferent when displayd in KOB1

The "Aux. Account Assignment 1" field in COEP table appears as KSIN0001198763 (for example) whereas when the same document is displayed in KOB1 it appears as CTR 1198763.  1198763 is a cost center here.
We are retrieving data from COEP table in a custom report and want the field "Aux. Account Assignment-1" to be displayed as it appears in KOB1. Can anyone share the logic of this formating in KOB1 please so that the same can be used in our Z report. Thanks so much in advance.
Edited by: Neeraj Batra on Jun 18, 2011 10:45 PM

Hi,
  KSIN0001198763 would be the object number
KS - cost center
IN00 - should be your CO area
01198763 - the remaining nos should be your cost center
please check if i am correct
regards
Waman

Similar Messages

  • The "Aux. Account Assignment 1" field in COEP table appears as KSIN00011987

    We are facing an issue with field  "Aux. Account Assignment 1" in COEP table. When we display this field in our Z report it appears as "KSIN0001198763" (for example) where 1198763 is a cost center. Whereas;  the same field for the same document when displayed in KOB1 appears as "CTR 1198763".
    Can anyone share the logic of this formating in KOB1 so that the same can be used in our Z report please.
    PS- There is no conversion routine at the filed level for "Aux. Account Assignment 1" in COEP table.

    Hi,
      KSIN0001198763 would be the object number
    KS - cost center
    IN00 - should be your CO area
    01198763 - the remaining nos should be your cost center
    please check if i am correct
    regards
    Waman

  • Item category and Account assignment category field grayed out in PR/PO

    Hello all,
    While making a PR/PO we use both the item category and account assignment category. However, after saving the PR/PO, when i try to change the fields through ME22N/ME52N, the fields are greyed out. I dont think this can be controlled through the layout screen.
    Is there anyway the fields can be made modifiable in ME22N/ME52N ?
    Please help!
    regards,
    Soumyadeep.

    Hi,
    Well, actually you can control the Field settings in customization of Document Type. Check the following :
    Go to SPRO>MM>Purchasing>Purchase Order>Define screen layout at document level
    Click on the desired Document Type and see if the Field selection for Item Cat and Acct Assignment is checked for Display for that Document Type. If it is then change it to Optional.
    Now, Go to SPRO>MM>Purchasing>Purchase Order>Define Document Type and see if the Field Selection Key is assigned to the (Updated just now) document Screen layout.
    Hope this helps,
    Best regards
    Amit Bakshi

  • Account assignment category field missing?

    Hi Gurus,
    I am creating PO for non valuated stock material - UNBW . system giving me error of maintaining Account assignment category but I could'nt find the field to maintain.
    Can you experts help me out ? Is  the field not activated if so how to activate it?
    thanks .

    hi Amol,
    Do check it once in the item overview, the column name could be from 'A'
    Or
    You can also find the Account assignment tab in the Po item details...Check it carefully for the line items for which you have used UMBW material type material....
    Even if it doesn't follows, check here:
    SPRO >> Logistics General >> MM >> Basic settings >> material type >> here execute for your define/configure material types...here double click on the UMBW and check whether there is any settings..
    Hope it helps..
    Regards
    Priyanka.P

  • Account assignment tab fields on the PO

    hi gurus,
    Is there a transaction like ME2N which can show me the fields like G/L account, cost center and order fields in the output like ME2N, ME2M show some fields like net price, quantity, material group, etc etc
    Thanks
    Ravi
    Edited by: anusha vemulapati on Aug 28, 2009 7:44 PM

    Dear,
    As replied try ME2K with selection account assignment K and cost center with * sign and if applicabe other like plant.
    This report will give you the purchasing document - cost center - G/L Account wise quantity distribution details (irrespective of either Quantity or Percentage distribution in Purchase order).
    Regards,
    Syed Hussain.

  • Unable to change account assignment field in PO

    Hi Experts!
    We are using SRM 7.0 with extended classic scenario.
    We are facing an issue with account assignment category field in a PO.Here is our scenario.
    User created a PO with costcenter account assignment field and this PO transffered to backend system i.e R/3.
    When the user again tried to edit the PO in SRM and change the account assignment field from costcenter to Internal order that is not possible because the
    account assignment field is grayed out .Then the user has to create a new PO with Internal order as the old PO didn't allowed him to change.
    Can any one help me in this regard with  some OSS note or any other possible solution and what might be the reason for the same?
    Thanks in advance!
    Regards,
    Kalyani.

    Hello Kalyani,
    Just to understand, Is your PO has Good Receipt or Invoice receipt processed? If so then PO do not allow to change the account assignment as charges are booked already.
    If not i would recommend to check if your BBP_GETSTATUS_2 job is running with proper interval? Sometime old PO's do not get refresh status if BBP_GETSTATUS_2 variant is set based on SAP recommendation (i.e. 7 days or so). In that case please execute manually BBP_GETSTATUS_2 and validate.
    Thank you
    Ritesh

  • SRM 7.0 Account assignment adding new field Profit_ctr

    Hello All
    I am hoping that someone has done this in SRM 7.0 and can help me out.
    I have added PROFIT_CTR field to Account Assignment tab for SC.
    We have already followed the instructions in OSS note 1082243 and added PROFIT_CTR field to the 2 tables BBP_C_ACCF and BBP_C_ACCFD. The field is available in configuration for creating a new account assignment category using PROFIT_CTR field.
    In WDC, implicit enhancement was created and layout changed to make the field available in the view. The field already exists in the context so no other development was done.
    The PROFIT_CTR field is now available in Assignment tab for input SC is created.
    Also, configuration is done in PPOMA to default u201CProfit Centeru201D as the account assignment category.
    The problem is that during the SC creation , in the Account Assignment line, field  u201CAssign Numberu201D is still pointing at GL account (it is defaulted to GL Account) and not Profit Center value.  I would have expected u201CAssign Numberu201D field to contain profit center value and not GL Account.
    What further changes are needed?
    Looking forward to any suggestions..
    Thank you

    Hi Raj,
    Here is the documentation on how we did this when we were in 7.01.
    Version 20.0 - :
        The new requirement needs Profit center as one of the Account assignment category.
                      In order to get the profit center an implicit enhancement is required as SAP suggested.
                                        Please see SAP’s response at the bottom of this version.
    Enable Profit Center Field:
          1.) Enhance the class /SAPSRM/CL_PDO_ACCT_ASSGT_HLPR by creating a new post-exit for method GET_ACCCAT_TECHFIELDS.
       2.) Within the post-exit modify the field (ACC_FIELD) with new value
    ‘PROFIT_CTR’ of internal table ET_ACCCAT_TECHFIELD where ACC_CAT = ‘PR’.
          3.) This enables Profit center as one of the Account assignment Category.
    Version 22.0 - :
    Enable Profit Center F4 in UI:
    4.)  Enhance view V_DO_ACCOUNTING of component /SAPSRM/WDC_UI_DO_ACC.
    5.) Create a post-exit for method WDDOINIT of view V_DO_ACCOUNTING.
                                        6.) Within the post-exit set the value help to Application Defined. See below code.
                                                    CALL METHOD lo_nd_info->set_attribute_value_help
    EXPORTING
    name = 'PROFIT_CTR' " ContextAttribute Name                                 
    value_help_mode = '141' " value help mode–Application Defined.
    value_help = 'USAGE_SH_F4'. " Search help component usage.
       This enables the F4 input help for field Profit Center. Since it’s a search help in ECC and wanted to be displayed in SRM, additional development is required to bring in the F4 Popup screen.
    Enable Profit Center F4 Pop-up Screen:
    7.) Enhance the component controller of component /SAPSRM/WDC_UI_BACKEND_SH.
    8.) Create a post-exit for method SET_BAPI_PARAMETER of the component controller.
    9.) Within the post-exit set the Business objects parameters as follow
    DATA ls_bapi_parameter TYPE if_componentcontroller=>element_bapi_parameter.
    DATA lr_node           TYPE REF TO if_wd_context_node.
    lr_node = wd_context->get_child_node( 'BAPI_PARAMETER' ).
    IF iv_field EQ 'PROFIT_CTR'.                                       
    ls_bapi_parameter-objtype   = 'BUS0015'.
    ls_bapi_parameter-objname   = 'BUS0015'.
    ls_bapi_parameter-param     = 'PROFITCENTER'.
    ls_bapi_parameter-method    = 'GETLIST'.
    ls_bapi_parameter-field     = 'PROFITCENTER'.
    ls_bapi_parameter-shlpname  = 'PRCTR_EMPTY'.
    ls_bapi_parameter-shlpparam = 'PRCTR'.
    ls_bapi_parameter-FIELD_DESC = 'TXT50'.
    ENDIF.
    IF ls_bapi_parameter IS NOT INITIAL.
    lr_node->bind_structure( new_item = ls_bapi_parameter ).
    ENDIF.
    Setting these values enables the F4 Popup screen.
    Move Selected Value from Pop-up to profit center field in screen.
    10.) Once value is selected from the pop-up it should be moved to the
    profit center screen field.
    11.) In order to do that read the context Node ‘SELECTION’. This node contains
    the selected value.
    12.) Now move the selected value to the profit center field in context node
           ‘COMP_CONTEXT.’     
      lr_node = wd_context->get_child_node( 'SELECTION' ).
    lr_node->get_static_attributes( IMPORTING static_attributes = ls_selection ).
    lr_node = wd_context->get_child_node( 'COMP_CONTEXT' ).
    lr_node = lr_node->get_child_node( ls_selection-node_name ).
    lr_node->get_static_attributes( EXPORTING index = ls_selection-index
    IMPORTING static_attributes = ls_content ).
    Version 23.0 - :
            1.) Need to raise a warning message in Shopping cart whenever the profit center is
    Set to “PCDUMMY”.
    2.) Edit BAdI Implementation ZCL_IM__SRM_SEI_ITEM_CHECK. Add the warning message in method IF_EX_BBP_ITEM_CHECK_BADI~BBP_ITEM_CHECK by appending a new line with error message to export table ET_MESSAGES.
    Version 23.0 -
      1.) Create a customer field called ZPR_DESCRIPTION for accommodating profit center description. This is done by appending the field to structure INCL_EEW_PD_ACC_CSF.
    2.)  Create a RFC in ECC which would read table CEPCT to read profit center text. This Function module is called Z_FI_GET_PROFIT_CENTER_TEXT.
            SELECT SINGLE MCTXT FROM cepct
    INTO EV_PROFIT_CTR_TEXT WHERE spras = sy-langu
    AND   prctr = IV_profit_ctr
    AND   datbi >= sy-datum
    AND   kokrs = IV_controlling_area.
    IF sy-subrc NE 0.
    RAISE PROFIT_CTR_NOT_FOUND.
    ENDIF.
    3.) Within BAdI  ZCL_IM__SRM_DOC_CHANGE_BAD call the function module
          Z_FI_GET_PROFIT_CENTER_TEXT. Read profit center text and fill the
    Customer field ZPR_DESCRIPTION.
    SAP's Response for when I raised a message about profit center.  This is what helped us to start.
    Dear Customer,
    In the account overview screen, for custom account assignment
    categories, the GL account field would be shown in the 'Assigned to'
    column by default. However, if you go to the account assignment detail,
    you are able to use the search help for the profit_ctr field.
    As the fields are binded dynamically, only through a modification you
    would populate profit_ctr automatically.
    From the SRM 6.0 release onwards, the account assignment overview screenwas changed such that for the custom account leading fields, always the
    GL account would be shown. This was changed because, earlier when the
    leading field was a customer field, it was not possible to show the
    account description in the overview screen and it remained empty. This
    was creating confusion for the users.
    For the new releases, it was decided that when the leading field is a
    customer field, the GL account and its description would be shown in theoverview screen. The coding for the same has been implemented in the
    method /SAPSRM/IF_PDO_ACCT_ASSGT_HLPR~GET_ACCCAT_TECHFIELDS(class
    /SAPSRM/CL_PDO_ACCT_ASSGT_HLPR).
    WHEN OTHERS.
    ls_accf-acc_field =
    /sapsrm/if_pdo_action_c=>gc_acc_obj_gl_account.
    ls_acc_cat_techfield-desc_field =
    /sapsrm/if_pdo_action_c=>gc_acc_cat_gl_desc.
    ENDCASE.

  • How to grey out the Account Assignment Group Fld  in Billing Doc Line Item

    Hi SD Guru's
    I have a small doubt.
    I have maintained account assignment group in material master. Now when i create an order , the account assignment group gets picked from material master into this sales order.
    Now i go to VF01 for doing the invoicing.
    Now i can still go to billing document line item against the material and change its account assignment group before raising the invoice. When i change this field, i can still post to accounts.
    I want to know is there any way in which we can restrict the way in which this field is greyed out and is made non-editable, so that only correct entries with account assignment group maintained in material master are posted.
    Answers will be appreciated.
    Kind Regards
    Ravi

    Hi,
    Sandeep can you please give me step by step process of using SHD0 in this case.
    Now if i apply this to transaction VF01 and VF02, would it apply for all billing document types? I dont want that, i want it to work for a specific billing type
    Kind Regards
    Ravi

  • Material Account Assignment Group, in Sales Order Mass Update

    Sd Experts,
    We just went live, our consultant updated Account assignment group at the material level but did not updated existing materials. When we caught the problem and updated exisisting materials there were some existing orders already created. Which now I am getting an account determination error due to this field being empty at the material level.
    We have some sales orders that I need to update but they are just too many, currently I have been fixing them thru VF02, for to the material and update manually.
    Does anyone has any idea how to mass update this field for all existing orders, to update "Account Assignment Group" field automatically
    Your help will be greatly appreciated.

    Hi
    In Mass transaction choose object type as #BUS2032,after executing in the next screen from the tables choose#Sales Order Item Data, and from the fields choose#AcctAssgGr (MASSSDHE)-MASSSDHEAD_S-KTGRD, now execute to find fields Sales document and Sales Document item , here load all the Sales Orders for which the change is needed along with the items for which the changes are needed execute again to find the next screen with Sales Documet, Sales Document item and Account assignment which needed to be changed,now select the entire block enter new values in the Account assignment  box in the above, click on the 'Carry out MAss change button ' and then save, it will take some time basing the change tobe carried and issues a log as to how many documents were changed
    Hope this is clear,please do a test run before.
    Regards
    Chandra

  • Account assignment category -- SERVICES?!

    Hello gurus!
    Basically my problem is that I don´t want to introduce any account assignment category in my purchase requisition item when I use SERVICE master code (material defined as a Service type)
    Is it possible?
    Thanks a lot,
    David

    Hello,
    Thanks a lot for your tips.
    I just only try to use my material service in my purchase requisition leaving the account category field as "empty" (without value)
    ...but as KANAKARAJ said and I agree with him...logically a service has to be posted as a direct cost. It is not an inventory material. He is right!
    ...but that why I ask you...if it is possible,
    Thanks anyway

  • Account assignment group in material master

    Dear Gurus,
    In material master basic view there is account assignment grp field. Earlier this field has the value for 03 semi finished goods and with this setting values the user where posting invoice. But the user wants to change this field value from 03 semi finished goods to 01 trading goods for some specific reason.
    The moment you change this value from 03 to 01, system is giving an error msg as incorrect account assignment group in material master.
    Regards,
    Prashanth Pai

    Check this link http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/account-assignment-group-2207835

  • Changes in Purchasing Document Account Assignment during Goods Receipt

    Hi MM Gurus,
    Good day!
    I just wanted to check with you on something that I came up while tinkering with SAP. Say, I have a PO with account assignment F for Order 1. Then during GR, I realized that I placed the wrong account assignment object, which should be Order 2. Can I execute this change during GR or do I have to do it either at the PO or IV level? In the standard MIGO setup, the Account Assignment tab is set to display. I tried checking the details for F in OME9 and found the Account Assignment changeable field. I tried enabling it but I still came up with the same result. I understand the logic behind why is it setup that way, but I want to make sure if there is any workaround for this
    Hope you can respond the soonest.
    Regards,

    I our company (and many others I had contact to) the goods receipt is made by the porter or the warehouse people, in general from people different from the requestor. I mean the receipt is done at the central place where the goods arrive at the plant.
    the internal distribution is made based on the GR slip which has all necessary information.
    A warehouse guy, or even a porter (often from a external security service  provider) should not be able to correct any financially relevant information.
    A change of account assignment data may even be a conflict to existing approval strategies.
    LIV is done by accountants, a totally different skill level compared with warehouse workers.

  • PS: Account assignment in WBS

    Hi Friends,
    We have added a few user fields (Fund and Fund Center) in the WBS account assignment tab.  In the standard system, the 'account assignment elem' field (BELKZ) and accounting fields (e.g. Business Area) are greyed out onca a PR, PO or invoice is posted to the WBS. How can we similarly lock our user fields from from being changed.

    Hi Merli,
    I think a Basis person should be surely able to hlep you out with this problem as Basis person will assign the authorsization check, from not being changed. contact Basis person, hope you get the resolution.
    cheers !

  • Account assignment Category is not popping up for one User

    User is trying to create the SC, but there is no Account assignment category( Cost center, WBS…) being displayed when I try to search the Acc assignment category, it gives the results without any values. There is no values for Category field for the SC cart.
    I verified the attributes for me and user, everything looks same.
    Please advise.
    Thanks & Regards
    Sada

    Hi
    Seems like there is a bug in the System.
    Are you talking of customer fields / standard fields - search help ?
    Account assignment search help in SC.
    User must have should the authorization object MBBP_SHLP assigned in attributes (SU01 transaction)._
    Re: Blank account assignment in plan-driven scenario
    Meanwhile, try these SAP OSS notes and links ->
    Note 739509 BBPPO01: SEARCH FOR ACCOUNT ASSIGNMENT CATEGORY DOESN'T WORK
    Note 746788 - Back-end system search help for cost center
    Note 656633 - Search help requires dialog users
    Note 907016 - Error when you select search help
    Re: Search help for Acct Assignment not working
    Also ensure, proper authorization objects are provided by BASIS team.
    Let me know incase you need any assistance.
    Incase nothing helps, You need to raise an OSS message with SAP on this.
    Regards
    - Atul

  • Display mode for Account assignment category for NB document type

    Dear MM gurus,
    Is it possible to have Account assignment category field in ME21N for document type NB to be display only. Could any one please advised if this is possible?
    Thanks in advance.

    Hi,
    Yes it is possible. But u have to define ur own Field selection for the PO document type and u have to assign it in the document type NB. Go to SPRO>IMG>MM>Purchasing>Purchase Order-->Define Screen Layout at Document Level

Maybe you are looking for