Aux cable that works with Belkin Candy Shell Case?

Just got the iPhone 5 this weekend and bought the Belkin Grip Candy Shell case and my Aux stereo cable doesn't fit in the port. Is there a cable out there with an end piece that is more similar to that of the headphones so that it will fit in the port and not make me remove the case everytime I want to listen in my car?
Thanks in advance for any help!

I was reading around before I made this thread trying to see if my question has already been answered and I came across a few people who were using an AUX cable for phonecalls, and once they switched to a dock setup they couldn't use their car speakers for calls. I never saw a car kit mentioned but I could have maybe overlooked it.

Similar Messages

Can anyone recommend a glass or plastic screen protector that fits a Speck Candy Shell case?

Hi. Does anyone know if a glass screen protector will be too thick to fit the Candy Shell case? I really don't like the film options. I specifically want to get the Sir Lancelot's Armour glass protector.

Ive seen and played with most all the zippered strapped cases, and most all of them are awful.
it still ended up back at the Incase strapped case, very thin, but very well padded, well made and the perfect all around choice.
id recommend getting a like new used one for $25 on ebay rather than $60 new. But as you wish.
like this :
http://www.ebay.com/itm/Incase-Neoprene-Sleeve-Plus-Laptop-for-13-Apple-MacBook- Air-Black-/171188196301?pt=US_Laptop_Cases_Bags&hash=item27db9c93cd
$20 , Incase used like new , perfect choice.
same case new is $60

Need dock extender cable that works with bumpre case

Hi,
Putting a bumper case on an iPhone 4 completely resolves the antenna issue (at least it has for me). The problem is that third party dock connectors such as my car charger won't work with a bumper case because the bumper case is made to exactly fit an Apple manufactured dock cable and the dock housing on my charger is to big to fit. Does anyone know specific extender cables (manufacturer and part number) that will work when the phone is in a bumper case?
Thanks,
Rob

I Had the same problem , went on this site to purshase dock extenders and cables
http://gizmomix.com/shop/accessories/2-extension-dock-extender-adapter-for-iphon e-5-5s-ipad-lifeproof-otterbox-case/
http://gizmomix.com/shop/accessories/dock-extender-adapter-extension-cable-iphon e-5-5s-otterbox-lifeproof-case/

Are there any usb to parallel converter cables that work with iMac 10.6?

Have a Brother HL-5340D with damaged USB port, can I connect with a usb to parallel converter cable and have it work?

If you try to tweak the dock with third party software, that will corrupt the Dock preferences. Better to leave well enough alone.

Car charger that works with the bumper case?

Does anyone know which, if any, brands of car chargers and models that work with the new bumper case? I went to best buy yesterday and they all looked too thick to even buy it and give it a try.

I'm pretty sure the lack of functionality with car chargers and the bumper case is simply because the cutouts for the USB connector on the bumper is too small..that's the only reason. Otherwise it will work; it's simply a physical problem with the connector not seating properly; that's it.
I'm saying this based on my own situation. I have a Griffin car charger /FM receiver that worked with my iPhone 3G and it worked with my iPhone 4 until I put the bumper case on.
The situation is the same situation as to why the Apple supplied USB cable that shipped with the 3G does not work with the iPhone 4 w/bumper. Apple redesigned the size of the USB connector and sized the cutout on the bumper for their new smaller size making the bumper not backwards compatible with existing devices with the older size USB connectors. The size differential is not that big but it's big enough to cause problems.

My iPhone cable gave me a warning this morning that it was not certified to work with this phone, but it is the cable that came with the phone and that i have been using for a year and a half. Why?

i plugged in my 18 month old iPhone to charge it, using the cable that came with it and that I have used regularly all along. I got a warning on my phone screen saying the cable is not certified and may not work properly with my iPhone. Why?

If you updated iPhone to iOS7, it now checks for real Apple Lightning Cable. Your cable may not be Apple, or someone swapped another cable with yours. Make sure the cable end is clean, take a clean dry toothbrush and carefully clean charging port on the iPhone.

Why does only the USB cable that came with my phon...

I recently acquired a Nokia Lumia Icon from Verizon. I have a Lenovo Yoga Pro 2 computer running Windows 8.1 with the Windows Phone App for Desktop (WPA4D) installed. I had a very difficult time getting my Icon to be seen by my computer when connecting it with one of the half dozen micro USB cables I have laying around. WPA4D would not recognize it. Then, I connected it using the USB cable that came with the phone, and WPA4D immediately recognized it. Then I unplugged it and went back to a different cable - it was again not recognized.
What is different about the USB cable that ships with the Nokia Lumia Icon? If I want to order more, like from Monoprice, what do I order to get the same thing? Why is Nokia (apparently) using some sort of proprietary cable??
Thanks,
Eric

It is not proprietary.The charging/data cable for my GPS works.
A lot of the cables are just for charging and that is all they are wired for and they don't even have the data pin. Full size USB cables are the same way.
If I needed an extra I would get it from Nokia.

Ipod touch 5th gen says not able to charge when imusing the cable that came with it

My Ipod touch 5th gen says charging is not supported with this accessory when the cord im using is a cable that came with it and the cable is less the 5 days old. i also know the usb slot works for powering the ipod because it was before. i have treid useing different ports on more than one computer but with no luck. any help would be lovely

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

IPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

iPhone original doesn't work with Belkin TuneBase FM after 2.0.1 update

Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
What happens if you ask for a simple image like
http://URAN:8080/i/bottom_left.gif

Routers that work with iChat AV?

Since Apple's list of approved routers hasn't been updated for years, I would love to hear from anyone who has purchased a router recently that works with iChat for audio/video, including any special setting changes/tips. Could anyone with a success story post here? I'm tired of the error 8 messages which in at least some cases seems to be router related.

@stevesol
I have used the DI-604 for about 5 years now. It is a great and cheap router/firewall. The only problem that I have ever had was an odd one. I have a mac pro. i have an external amp that I use for playing my music through. I had a cable run from the rear audio out to the amp. After the last firmware update (mac pro EFI firmware update 1.1) I could not use ichat anymore. If I bypassed the router and went straight to the modem then all was fine. It turned out that there was a major conflict with my setup using the router and rear audio out port but if i used the front headphone jack everything was fine. Other than that the DI-604 is very good. I open port 5190 on the router and have good results. If you are not sure how to open up ports then check out this site. It shows to open up a whole pile of ports but the 5190 port works fine for me.
http://www.portforward.com/english/routers/port_forwarding/Dlink/DI-604/iChat.ht m
I would also recommend this fine site from one of the other posters. Ralph Johns site is excellent
http://www.ralphjohnsuk.dsl.pipex.com/page2.html
and of course what Apple has to say about their firewall
http://docs.info.apple.com/article.html?artnum=93208

Lightening Cable that shipped with iPhone5 now not certified

Since upgrading to iOS7 charging the phone has become problematic.
I now get this warnng saying the cable or accesory is not certified this is the Lightening Cable that shipped with the iPhone so it would have a certified chip.
If I move the cable charger & phone to a different power point this sometimes allows charging.
I have a couple of questions that arrise having read about these glitches.
Is it possible that the certified chip has somehow been burnt out (possible in the iOS 7 upgrade)?
I have read that now the Lightening connector is now handed(as a result of iOS7) so there is now a right way up?
One persons solution is to pull the cable up firmly to the left side front and hold the cable in place with an elastic band whilst charging .
I do not expect to have to jiggle cables and change to different power outlets to enable charging firstly changing wall sockets in a newly rewired house would point more at a poor connection with the Lightening plug & socket.
There has also been suggestions that the socket in the iPhone can become restricted through lint (fluff) it sounds posible but why should this rear its head after the instalation of iOS7?
Were this the case then surley the cable would not be seen at all so there would be no chance of receiving a message informing me that my Apple Lightening cable (as supplied with the phone ) is not autherized ?
So is the autherization chip overly sensative to the effects of a reboot after the iOS7 upgrade and the succesive ones since and has become corrupted?
This Lightening cable issue is most tiresome having to waste time just to charge the phone daily & then I have the prospect of spending up to half a day getting to the Apple Store to see if this can be resoved .
Is this genuine Lightening cable(not been recognised) issue caused by iOS7 or the result of dirt in the socket preventing charging .
Assuming that the issue has been caused by a worthy idea of protecting the user from injury from non Apple accesories with a clever tweek to the iOS an immenant fix lke yesterday would be good .
I am not used to this from Apple products (they simple work) and hope that this is resolved rapidly since I am getting to feel like throwing my iPhone out of a high window or beating it with a large hammer .

The most likely cause is dirt in the Lightning connector on the bottom of the phone. Look in it with a good light and a magnifying glass. If you see any lint or other dirt clean it with a wooden toothpick.
After that, I would suspect the cable.

Case that works with smart cover on?

Has anyone seen any shells or cases that work with the smart cover on? I have only come across one.
Thanks

SF Bags, aka Waterfield Designs, has several designs made to fit the iPad 2 with the Smart Cover. I, too, have the original Ultimate Exo Sleevecase, but it is a bit large for the iPad 2. They recommend buying the "non-Exo" Ultimate case for the IPad 2.
One case that I particularly like is the SmartCase, and they make a model that fits with iPad 2 with the Smart Cover; it has a pouch on the back for earphones, etc.. I have a similar one for my iPhone and it is very well-made and offers a lot of protection.
They have seven different iPad cases and several are designed specifically for the iPad 2 with the SmartCover.
If you have any questions, you can write them, and they answer them promptly.

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

A UPS model that works with Mac Native software to do a graceful shutdown and automatic restart during a power failure.

I've tried 3 UPS's (2 APC and one TripLite) that state they are OSX compatible, however, they do not fully respond to the native osx setting in (system Preferences/ Energy Saver/ UPS/Start up automatically after a power failure). This is what happens:
During a power outage, the OS does a graceful shutdown, but does not reboot when power is restored.
Apparently, the UPS is not notified to turn off during the shut down process. The power (on-Off-On) cycle is required by the mac to restart.
Trip lite tech support says they have software that works with Windows and linux to do this, but not mac.
I've tried two older APC UPS's, One Smart UPS1500 and a Back-UPS 1500 with the same result on two different servers and one iMac.
At this point I'm looking for a make and model of a UPS that does work. If anyone can verify a make and model that actually does this, I'd greatly appreciate it.
Its a simple test, just pull the plug on your UPS, wait for the system to shut down, and then plug the UPS back in. The system should reboot.

Many of the CyberPower UPS units are compatible. Checkout the home solutions on this page: http://www.cyberpowersystems.com/products/ups-systems.html

I just upgraded to os 10.9.5. When I try to open iPhoto, I am told that the version I have(9.3), is not compatible with the os. But it came with it when I upgraded. What do I have to do to get an iPhoto that works with 10.9.5? TIA

I just upgraded to os 10.9.5 on my 15 " macbook pro from os 10.7.5. When I try to open iPhoto, I get the message that it is not compatible with the os. How can that be??? It came with the upgrade. It says the version of iPhoto is 9.3. How do I get an iPhoto that works with os 10.9.5? TIA

This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgradeto iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1

Aux cable that works with Belkin Candy Shell Case?

Similar Messages

Maybe you are looking for