Aux track has no input and no choices

Pretty simple question. Why do my aux tracks say "no input."

No. I click on the input of an aux and the only item listed is "no input."
Some background: We use Logic Express and Pro in university labs on about 30 machines. I checked a powerbook, a Dual G5 with 002, an iMac with Mbox using express. It works on Pro. Does Logic Express not allow Aux inputs? Is it that simple? That seems odd.

Similar Messages

I am trying to access my Ipad but the wrong passscode has been input and it is now disabled. when i try to reset the ipad it switches itself off before i have had chance to complete reset. please help

I am trying to access my Ipad2 but have input the wrong passcode and it has now been disabled.
I have followed the information to reset to factory settings but the ipad switches off before the reset has been completed.
how can I reset my Ipad so I can reuse this again?
Thank you

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

Keyboard has slow input, and weird output

My macbook is behaving in very odd manner, as I type It seems to be following keyboard modifications, it sometimes slows down, other times moves the cursor to different areas. Or selects and deletes words, moves along the paragraph, etc, etc. I have no clue what is happening, but it is driving me nuts. Can anyone help?

Still nothing. I am not ready to admit it is a hardware issue. I know that if I buy a new one and install it, i am going to have the same problem. There is no way that the Software Update and this just 'happened' at the same exact time. Any ideas????

How to save input and output in file

hi ni
i have program that has some input and some output
i try to save the input and output in file word office or excel like this
error
extended
ideal
value
wq
wp
value
xq
xp
0.857143
0.7
0.6
2
0.5
1
1
thank in advace
best regards
m.s
lab view 2011
hi ?Q>
Solved!
Go to Solution.
Attachments:
adder in exteded stochastic.vi ‏37 KB

johnsold wrote:
Read from and Write to Spreadsheet File VIs should do what you want.
I did not take the time to try to decipher what your program is doing, but I think you could replace all those feedback nodes and Build Arrays with an integer data type and the Rotate function from the Numeric >> Data Manipulation palette. You will still need one shift regsiter or rfeedback node for each of the four signals.
You have duplicated code: Divide by 65535, multiply by 2, and subtact 1 followed by a > comparison. Make that a subVI and place 4 instances on your block diagram.
Those simple changes will make you diagram understandable, reduce its size to the size of a postcard, and make any future changes easier.
Lynn
thank
hi ?Q>

What's the difference between an audio INPUT and AUX object?

Can someone explain the difference between an audio INPUT and AUX object? They both seems to do pretty much the same thing ... when would you use 1 over the other?

revDave:
Suppose you're recording a guitar track and you want to add a very gentle compressor to avoid overload during the rec process. you need an audio input channel with a compressor inserted. this way, your guitar will be recorded with the compressor processed. If you use audio and midi gear and want to bounce your material, put all your midi audio in an audio input channel.This way, you don't have to use a real audio channel to record them. You can hear them, even use some plugins, and have them bounced with your audio channels.
Now, suppose you recorded three vocal channels, and want to use an equalizer. You need an aux object to send your vocal channels and use only one eq. This is very useful when you have similar materials recorded in diferent channels (2 guitars, vocals, pete/sax/bone, and so on). Send their outs to an aux object, insert the fx you want, and set the aux object's out to the main out of your project, and it's done.
I hope it helps you.
Tovinho

Creating seperate audio input and audio output tracks?

I need a bit of advice on how to do this. I'm using a simple Lightsnake USB cable to hook my guitar directly into my computer, now i can record into the program but need to switch between the Unknown USB input and the built-in inputs to get sound. This has made monitoring tracks impossible and is pretty frustrating, any help would be appreciated.

Hi Dennis
Logic Express seems to like a single source in and out, however you can get around this by going into Audio Midi Setup (Applications -> Utilities -> Audio Midi Setup) and creating an aggregate device with which you can choose separate input and output devices. Then, simply choose the aggregate device as your audio driver when you're back in Logic.
P.S. I assume this is still valid for LE8 as I havent got my copy yet
Good luck and may the force be with you
Sam

I have a 60 inch Sony XBR TV that has DVI input but not HDMI. I am using an adapter to get the video from my Apple TV, but the screen flashes a lot. Do I have any other choices other than buying a new TV?

I have a 60 inch Sony XBR TV that has DVI input but not HDMI. I am using an adapter to get the video from my Apple TV to the Sony, but the screen flashes a lot. Do I have any other choices other than buying a new TV?

Is this an iphone question?
You have posted in the iphone forum.

Component has not input columns and/or input columns have invalid id when creating package programmatically

I am developing an ETL tool which has to create SSIS packages dynamically (and later execute them without being edited in Data Tools). One of my proto type scenarios is a simple data flow from a flat file to a flat file - without anything in between.
However there is a problem with the columns of the flat file destination - it says it doesn't have any.
Saving the package to XML and opening the destination component in the advanced editor (tab "Input and Output Properties") really shows that are no input columns defined. One click on the tab "Column Mappings" however solves the
problem. The columns and the mapping are generated, the package can run.
I already tried to place "ReinitializeMetaData()" calls nearly anywhere in the code, for both components, unfortunately without success:
destinationComponentWrapper.AcquireConnections(null);
destinationComponentWrapper.ReinitializeMetaData();
destinationComponentWrapper.ReleaseConnections();
The actual error during validation is (When the line for column mapping in the code below is commented out):
"0xC020201B - The number of input columns for Flat File Destination.Inputs[Flat File Destination Inputs] cannot be zero"
I am also trying to insert a column mapping - this leads to a com error: 0xC020201B
In this case I am wondering why Data Tools tell me that there are no input columns yet I can iterate over them - they just don't have a valid ID (0x8000004B / -2147483573) which is then causing the 0xC020201B.
See also "PROBLEM HERE" marker in the code below.
How can I make the destination component recognize the columns programmatically, as when I click on the "Column Mappings" tab of the advanced editor of the component in Data Tools?
Here is the complete proto type code:
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
using System;
using System.IO;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using Dts = Microsoft.SqlServer.Dts;
namespace msdatapipe
class Program
static void Main(string[] args)
Dts.Runtime.Application application = new Dts.Runtime.Application();
Dts.Runtime.Package package = new Dts.Runtime.Package();
package.Name = "Data Commander DTS Package";
// ADD PIPELINE TASK
Dts.Runtime.Executable pipelineExecutable = package.Executables.Add("STOCK:PipelineTask");
Dts.Runtime.TaskHost pipelineTaskHost = (Dts.Runtime.TaskHost)pipelineExecutable;
pipelineTaskHost.Name = "Data Commander Pipeline Task";
Dts.Pipeline.Wrapper.MainPipe pipelineTask = (Dts.Pipeline.Wrapper.MainPipe) pipelineTaskHost.InnerObject;
// ADD SOURCE COMPONENT TO THE PIPELINE TASK
String sourceFilePath = "C:\\cmi\\tmp\\data.csv";
Dts.Runtime.ConnectionManager sourceConnectionManager = package.Connections.Add("FLATFILE");
sourceConnectionManager.ConnectionString = sourceFilePath;
sourceConnectionManager.Name = "Source Connection";
sourceConnectionManager.Description = "Source Connection Manager";
sourceConnectionManager.Properties["ColumnNamesInFirstDataRow"].SetValue(sourceConnectionManager, "True");
sourceConnectionManager.Properties["Format"].SetValue(sourceConnectionManager, "Delimited");
sourceConnectionManager.Properties["TextQualifier"].SetValue(sourceConnectionManager, "\"");
sourceConnectionManager.Properties["CodePage"].SetValue(sourceConnectionManager, "65001");
sourceConnectionManager.DelayValidation = false;
// START --- MANUALLY READ COLUMNS FROM TEXT FILE AND ADD TO SOURCE CONNECTION MANAGER COLUMNS
IDTSConnectionManagerFlatFile100 sourceConnectionInterface = sourceConnectionManager.InnerObject as IDTSConnectionManagerFlatFile100;
using (StreamReader reader = new StreamReader(sourceFilePath))
String firstSourceFileLine = reader.ReadLine();
String[] columnNames = firstSourceFileLine.Split(',');
for (int i = 0; i < columnNames.Length; ++i)
columnNames[i] = columnNames[i].Substring(1, columnNames[i].Length - 2);
IDTSConnectionManagerFlatFileColumns100 sourceColumns = sourceConnectionManager.Properties["Columns"].GetValue(sourceConnectionInterface) as IDTSConnectionManagerFlatFileColumns100;
IDTSConnectionManagerFlatFileColumn100 column = null;
foreach (String columnName in columnNames)
column = sourceColumns.Add();
column.DataType = DataType.DT_TEXT;
column.ColumnDelimiter = ",";
column.TextQualified = true;
(column as IDTSName100).Name = columnName;
Console.WriteLine(columnName);
column.ColumnDelimiter = "\r\n";
// END --- MANUALLY READ COLUMNS FROM TEXT FILE AND ADD TO SOURCE CONNECTION MANAGER COLUMNS
sourceConnectionInterface.RowDelimiter = "\r\n";
Dts.Pipeline.Wrapper.IDTSComponentMetaData100 sourceComponent = pipelineTask.ComponentMetaDataCollection.New();
sourceComponent.Name = "Flat File Source";
sourceComponent.ComponentClassID = "DTSAdapter.FlatFileSource";
sourceComponent.ValidateExternalMetadata = true;
CManagedComponentWrapper sourceComponentWrapper = sourceComponent.Instantiate();
sourceComponentWrapper.ProvideComponentProperties();
// LINK CONNECTION TO THE SOURCE COMPONENT
sourceComponent.RuntimeConnectionCollection[0].ConnectionManager = Dts.Runtime.DtsConvert.GetExtendedInterface(sourceConnectionManager);
sourceComponent.RuntimeConnectionCollection[0].ConnectionManagerID = sourceConnectionManager.ID;
// Connect to the data source, and then update the metadata for the source.
//sourceComponentWrapper.Validate();
//sourceComponentWrapper.ProvideComponentProperties();
sourceComponentWrapper.AcquireConnections(null);
sourceComponentWrapper.ReinitializeMetaData();
sourceComponentWrapper.ReleaseConnections();
// ADD DESTINATION CONNECTION MANAGER
Dts.Runtime.ConnectionManager destinationConnectionManager = package.Connections.Add("FLATFILE");
destinationConnectionManager.ConnectionString = "C:\\cmi\\tmp\\data_out.csv";
destinationConnectionManager.Name = "DatComConOut";
destinationConnectionManager.Description = "Data Commander Connection Manager";
destinationConnectionManager.DelayValidation = false;
destinationConnectionManager.Properties["Format"].SetValue(destinationConnectionManager, "Delimited");
destinationConnectionManager.Properties["TextQualifier"].SetValue(destinationConnectionManager, "\"");
destinationConnectionManager.Properties["CodePage"].SetValue(destinationConnectionManager, "65001");
// ADD DESTINATION COMPONENT
Dts.Pipeline.Wrapper.IDTSComponentMetaData100 destinationComponent = pipelineTask.ComponentMetaDataCollection.New();
destinationComponent.Name = "Flat File Destination";
destinationComponent.ComponentClassID = "DTSAdapter.FlatFileDestination";
destinationComponent.ValidateExternalMetadata = true;
CManagedComponentWrapper destinationComponentWrapper = destinationComponent.Instantiate();
destinationComponentWrapper.ProvideComponentProperties();
destinationComponent.RuntimeConnectionCollection[0].ConnectionManager = Dts.Runtime.DtsConvert.GetExtendedInterface(destinationConnectionManager);
destinationComponent.RuntimeConnectionCollection[0].ConnectionManagerID = destinationConnectionManager.ID;
// CREATE PATH
Dts.Pipeline.Wrapper.IDTSPath100 pipelinePath = pipelineTask.PathCollection.New();
pipelinePath.AttachPathAndPropagateNotifications(sourceComponent.OutputCollection[0], destinationComponent.InputCollection[0]);
// DESTION CONNECTION MANAGER COLUMNS
IDTSConnectionManagerFlatFile100 destinationConnectionInterface = destinationConnectionManager.InnerObject as IDTSConnectionManagerFlatFile100;
IDTSConnectionManagerFlatFileColumns100 destinationColumns = destinationConnectionManager.Properties["Columns"].GetValue(destinationConnectionManager) as IDTSConnectionManagerFlatFileColumns100;
// START --- MANUALLY READ COLUMNS FROM DESTINATION COMPONENT AND ADD THEM TO DESTIONATION CONNECTION MANAGER COLUMNS
foreach (IDTSInput100 input in destinationComponent.InputCollection)
IDTSVirtualInput100 virtualInput = input.GetVirtualInput();
IDTSConnectionManagerFlatFileColumn100 column = null;
foreach (IDTSVirtualInputColumn100 virtualInputColumn in virtualInput.VirtualInputColumnCollection)
column = destinationColumns.Add();
column.DataType = DataType.DT_TEXT;
column.ColumnDelimiter = ",";
column.TextQualified = true;
(column as IDTSName100).Name = virtualInputColumn.Name;
column.ColumnDelimiter = "\r\n";
// END --- MANUALLY READ COLUMNS FROM DESTINATION COMPONENT AND ADD THEM TO DESTIONATION CONNECTION MANAGER COLUMNS
// NEED TO CREATE NEW META DATA AFTER COLUMNS
destinationComponentWrapper.AcquireConnections(null);
destinationComponentWrapper.ReinitializeMetaData();
destinationComponentWrapper.ReleaseConnections();
// MAP INPUT COLUMNS
foreach (IDTSInput100 input in destinationComponent.InputCollection)
IDTSVirtualInput100 virtualInput = input.GetVirtualInput();
foreach (IDTSVirtualInputColumn100 virtualInputColumn in virtualInput.VirtualInputColumnCollection)
Console.WriteLine("VIC " + virtualInputColumn.Name + "(" + virtualInputColumn.ID + ")");
destinationComponentWrapper.SetUsageType(input.ID, virtualInput, virtualInputColumn.LineageID, DTSUsageType.UT_READONLY);
foreach (IDTSExternalMetadataColumn100 metadataColumn in input.ExternalMetadataColumnCollection)
if (virtualInputColumn.Name.Equals(metadataColumn.Name)) {
// PROBLEM HERE:
// An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in msdatapipe.exe
// Additional information: Exception HRESULT: 0xC0047072
// at this point is virtualInputColumn.ID = -2147483573
destinationComponentWrapper.MapInputColumn(input.ID, virtualInputColumn.ID, metadataColumn.ID);
// if the code is commented out and the program rerun there is a package validation error instead: 0xC020201B
// 0xC020201B - The number of input columns for Flat File Destination.Inputs[Flat File Destination Inputs] cannot be zero
// NEED TO CREATE META DATA AFTER COLUMNS HAVE BEEN ADDED TO THE DESTIONATION MANAGER
// AND USAGE TYPE HAS BEEN SET OR WE'LL GET A VS_NEEDSNEWMETADATA
destinationComponentWrapper.AcquireConnections(null);
destinationComponentWrapper.ReinitializeMetaData();
destinationComponentWrapper.ReleaseConnections();
// SAVING DTSX PACKAGE FOR DEBUGGING
application.SaveToXml("C:\\Users\\CMI\\documents\\visual studio 2010\\Projects\\SSIS Tutorial\\SSIS Tutorial\\generated.dtsx", package, null);
Microsoft.SqlServer.Dts.Runtime.DTSExecResult packageResults = package.Execute();
Console.WriteLine("package execution result: " + packageResults.ToString());
// Basic check for errors
foreach (DtsError error in package.Errors)
Console.WriteLine("ErrorCode : 0x{0:X}", error.ErrorCode);
Console.WriteLine(" SubComponent : {0}", error.SubComponent);
Console.WriteLine(" Description : {0}", error.Description);
Console.WriteLine("press the return key hard to continue...");
Console.Read();

I suggest you revise your code against examples given in http://blogs.msdn.com/b/mattm/archive/2008/12/30/samples-for-creating-ssis-packages-programmatically.aspx
Arthur My Blog

I am a teacher who would like to use my Ipad2 in the classroom -but out school only has projector that has VGA inputs. And just to complicate thing I was to use it wirelessly (I have an Itv also). Can I get true mirrioring?

I am a teacher who would like to use my Ipad2 in the classroom -but out school only has projector that has VGA inputs. And just to complicate thing I was to use it wirelessly (I have an Itv also). Can I get true mirrioring?

The one you are looking at I believe is an older model and does not have very good reviews for working with an AppleTV2 / iPad 2 setup.
Here is the one that has worked for our district:
http://www.amazon.com/ViewHD-Component-Converter-Support-Surround/dp/B004F9XVBC/ ref=pd_cp_e_2
I can't say if the one you are referring two works or not, however I can say that based on the reviews, it looks like you may run into problems with the $45 version.

Saved patch won't submit bus sends and aux tracks

Hi!
I'm saving my channels as patches for later import in MainStage, but the aux tracks won't come along. Apple states:
In addition to the features of the channel strip setting you may be familiar with from earlier versions of Logic, patches also save any aux channel sends that are needed to reproduce the complete patch [...] (Logic Pro X: Using and saving patches - Apple Support)
However, when I create an empty project in MS, or Logic Pro X for that matter, the bus sends and accompanying aux tracks are not included. Am I doing something wrong?
Kindly,
Joachim

Hi
Make sure that you have not disabled the Sends via Patch Merging in the Library when loading the Patch
CCT

When you set up tracks what is best to pick for the input and output?

When you set up tracks what is best to pick for the input and output? also what is the buss output? Thanks

First part of the question I don't understand, so could you elaborate please?
Second part: bus output is used for submixes, for example, let's say you want the same EQ to be applied to all guitars in the song, so instead of using same EQ plug-in on all guitar tracks, you feed the output from these tracks to a bus track and use the effect just once on this bus submix.

Has Apple responded to the automatic tracking in the iPhone and iPad?

Has Apple responded to the automatic tracking in the iPhone and iPad?
And if not, why are they taking so long? I care about this, and not even telling people if they will be able to turn this off is worrying.
This is not a matter of whether or not it's a "big deal" or not, it is up to the individual to decide for themselves what they will and will not tolerate. Apple's continued silence is only making matters worse. They need to say SOMETHING.

Android does the same thing.
Have they said anything?
As far as I know, no one has said anything.
What do you want them to say?
Apple Inc.'s iPhones and Google Inc.'s Android smartphones regularly transmit their locations back to Apple and Google, respectively, according to data and documents analyzed by The Wall Street Journal"
http://online.wsj.com/article/SB10001424052748703983704576277101723453610.html?m od=WSJ_hp_LEFTWhatsNewsCollection

My IPad has been stolen and I was trying to track it on 'find my ipad' but the thief kept it offline. I just saw him change my user id. Any recommendations on how I can keep tracking the stolen device?

My IPad has been stolen and I was trying to track it on 'find my ipad' but the thief kept it offline. I just saw him change my user id. Any recommendations on how I can keep tracking the stolen device?

Yes, I filed police report, but there is nothing they can do until I get back to them on the tracking. It's been offline. I'm sure the whoever took it can find a way around breaking in the ipad..i really was hoping to get my pictures and videos of my kids back

I have a 2007 iMac connected via WiFi. It has been working fine until I turned it on after a recent vacation. Network preferences indicates that it is correctly connected to my WiFI system but the data input and output rate is virtually zero. I know that

I have a 2007 iMac connected via WiFi. It has been working fine until I turned it on after a recent vacation. Network Preferences indicates that it is correctly connected to my WiFI system but the data input and output rate is virtually zero. I know that the WiFI signal is reaching the iMac since both my iPhone and iPad are working perfectly at that location. I have rebooted the router and the iMac to no avail. Any suggestions would be greatly appreciated. Thank you very much. Geoff

Hi Geoff,
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

If i "add to library" with my existing library will it duplicate all tracks? i ask this as an entire genre has been deleted and i have 890gb of music

if i "add to library" with my existing library will it duplicate all tracks? i ask this as an entire genre has been deleted and i have 890gb of music

Hello gogreenj14,
If you had iTunes Match updated with all of your non iTunes purchased content already, then yes, when you enable iTunes Match with the following article it will have all the content that has been uploaded to iTunes Match will be available for download.
iTunes: How to add a computer or iOS device to iTunes Match
http://support.apple.com/kb/ht4913
Open the latest version of iTunes on the computer you intend to add. You can download the latest version of iTunes here.
Sign in with the Apple ID you use with iTunes Match.
Choose Store > Turn On iTunes Match.
Click the Add This Computer button.
When prompted, enter your Apple ID password.
iTunes will automatically begin scanning your computer's library for matches.
A status indicator will allow you to track progress. You may also manually pause and resume the process at any time by clicking the Stop or Start button.
Once iTunes has completed matching and uploading your iTunes library, your music in iCloud will be integrated into your local music library. A download button will appear to the right of any content that you have in iCloud that doesn't already exist on your computer.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Aux track has no input and no choices

Similar Messages

Maybe you are looking for