AV Cables Hooked Up - No Output at all

I don't have any videos on my ipod so I cannot try video output, but when I hook my Ipod up with A/V cables through the 3.5mm jack, I get no output onto my television at all.
Yes, my tv is on the right input, and yes I have tried multiple televisions and multiple inputs, there cannot be something wrong with all of the tvs.
If anyone else has had this problem and has fixed it, any information would be helpful. This is occuring with a 30gb Video iPod purchased in December '06, with Maxell 3.5mm generic A/V cables.

So, I was messing around with my ipod and television again, and it seems that the ipod will only play (tried all different connection possibilities) when my Wii is hooked up into the Component input and my ipod is in Video2. It doesnt always play with this set-up, only when the Wii is powered on. Any suggestions to make this work without the Wii being on? Makes it hard to listen when Wii music is playing in the background.

Similar Messages

  • Lost a 2 hard drives, have 7 k photos on a touch that I need to load on IMAC with a new hard drive, how do I do it.  Just never went from a Touch to iMac.  I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics!

    Lost my hard drive and also an Ipad, but have 7 k photos on a Touch that I need to load on fixed IMAC with a new hard drive, how do I do it. (There were more photos than the 7k, but they were saved on other drives, thank goodness).  7K pohotos on the Touch are no where else, must be saved!  Just never went from a Touch to iMac.  I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics!  New Aperture and IPhoto on IMAC with no other photos loaded on the new hard drive yet.

    I'd ask in the iTouch forum where there are more iTouch users there than here and they should know how to off load the photos.  It might take a 3rd party app. 
    OT

  • No printing :I can't print anymore, printing the same file with another programs is ok, printing form LR: Preparing  and Printing indicatorbar in the left hand upper corner are running, but no output at all rom my printer. I have been printing before. I u

    No printing :I can't print anymore, printing the same file with another program is ok, printing form LR (in the same system and printer of course :-) ): Preparing  and Printing indicatorbar in the left hand upper corner are running and completing, but no output at all to my printer. I have been printing before. Next I upgraded to LR5.7.1 but the problem stays. Perhaps some adjustment is changed by me unintentionally, but I have no idea. Does anybody know what to check? Printing to file is also strange,the canvas only seems to accept A4, and crops any image relative to that size, so a 10x15 cm print on 10 x 15 cm paper is cropped to 10x15/2. Anybody any idea? (system win 8.1 64, printer HP B8550)

    I accidentally solved my mystery.  For some reason it was set to "print to file".  I changed it to "printer" and now I am able to print.

  • HT4108 I have a projector and I want to show output video all the time,but I can only get it to work on safari

    I have a projector and I was looking for an app that would allow output video all the time

    The one you are looking at I believe is an older model and does not have very good reviews for working with an AppleTV2 / iPad 2 setup.
    Here is the one that has worked for our district:
    http://www.amazon.com/ViewHD-Component-Converter-Support-Surround/dp/B004F9XVBC/ ref=pd_cp_e_2
    I can't say if the one you are referring two works or not, however I can say that based on the reviews, it looks like you may run into problems with the $45 version.

  • I have cables hooked to my MacBook and HGTV, but can't get tv to display.  Help!

    I have cables hooked to my MacBook and HGTV, but can't get tv to display.  Help!

    Are you using a Mini DisplayPort or a Mini-DVI adapter on your MacBook? What input are you using on the TV, VGA, DVI, Composite, Component or HDMI?
    Also it would help to know which one of the 21 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier.
    And the make and model of your TV.

  • Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. Any ideas of how to fix this?

    Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. The screen is still black and white. Any ideas of how to fix this?

    Hi im,
    Thanks for using Apple Support Communities.  This article has a few troubleshooting ideas for issues with color on your TV when using Apple TV:
    Apple TV (2nd and 3rd generation): Troubleshooting video issues
    http://support.apple.com/kb/TS5148
    Cheers,
    - Ari

  • I've lost all audio output from all projects on logic.

    All the other internall audio ( Itunes, movies, videos) works so I know it's not the jack or wiring. Ive been to preferences> audio and re set it to internal audio1 and even tried setting it to pre sonus fire studio output but no help there switched it back and still nothing. It seems to be configured on logics audio preferences too but no output! All the level meters are bouncing but no sound! PLEASE HELP IF YOU CAN!! Thanxz.

    I'll try anything but the problem is that all projects are not coming out and wouldn't the solo buttons be limited to each project?  If the solo is stuck on one song it shouldnt be affecting all other songs right? but who knows,,,IT CANT HURT TO TRY!! Thanks for your input and I'll let you know!!

  • TS1702 iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. Have tried to reset it (not responsive), link to iTunes (not recognized), etc.

    iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. I have tried to reset it manually and via iTunes (not responsive), linked it to iTunes (not recognized), etc. Nothing works. This happened after an iTunes updated, after I was asked to "restore" my iPad to factory settings.

    Thanks, King_Penguin. Yes, I tryied putting the iPad into recovery mode. It freezes in the black screen with the iTunes and USB cable. When I followed the instructions and then started iTunes, I received the following message: "A required iTunes component is not installed. Please repair or reinstall iTunes (-424040)".
    I have unistalled iTunes three times already and donloaded and installed three new versions. No luck.
    Thanks a billion once again!

  • Trying to hook up my macbook to my tv, i have the all the cables hooked up (vga and adapter) but my screen is still black. I have a sharp aquos

    trying to display my macbook on my tv i have the apapter and the vga cables. I have watched all these youtube videos on how to do it i have also read my manuel for my tv and still it wont show up. Do you think its possibly the cable its new so not sure why its not working. Please help thank you

    Drag applications from your main desktop off the right side of the screen and they will appear on the TV.  This is the extended desktop mode. 
    Regards,
    Captfred

  • Print same output to all printers

    i am using :
    import java.awt.*;
    import javax.swing.*;
    import java.awt.print.*;
    import java.awt.image.BufferedImage;
    import java.awt.geom.Rectangle2D;
    public class PrintUtilities extends Thread{
    public static final double MM_TO_PAPER_UNITS = 1/25.4*72;
    public static double widthA4 = 210*MM_TO_PAPER_UNITS;
    public static double heightA4 = 297*MM_TO_PAPER_UNITS;
    public static double leftMargin = 4.0*MM_TO_PAPER_UNITS;
    public static double topMargin = 4.0*MM_TO_PAPER_UNITS;
    public void run()
    //setDaemon(true); // this thread will not keep the app alive
    print();
    private Component[] componentsToBePrinted;
    public static void printComponent(Component c) {
    new PrintUtilities(c).print();
    public static void printComponents(Component[] c){
         new PrintUtilities(c).print();
    public PrintUtilities(Component componentToBePrinted) {
    this(new Component[]{componentToBePrinted});
    public PrintUtilities(Component[] components){
         this.componentsToBePrinted = components;
    public void print() {
         PrinterJob job = PrinterJob.getPrinterJob();
         PageFormat pf = job.defaultPage();
         pf.setOrientation(PageFormat.PORTRAIT);
              Paper paper = pf.getPaper();
              paper.setSize(widthA4, heightA4);
              paper.setImageableArea(leftMargin,topMargin,widthA4-2*leftMargin,heightA4-2*topMargin);
              pf.setPaper(paper);
              job.setCopies(1);
         //     job.setCopies(PrinterJob.getPrinterJob().getCopies());
         Book bk = new Book();
         for(int i=0;i<componentsToBePrinted.length;i++){
              System.out.println("APPENDING THE FOLLOWING DOC NUMBER: "+i);
    //          disableDoubleBuffering(componentsToBePrinted);
              bk.append((Printable)componentsToBePrinted[i],pf);
                   //enableDoubleBuffering(componentsToBePrinted[i]);
         job.setPageable(bk);
         //TODO pass an appropriate/specific name for the print job
         job.setJobName("Mobile Report Print Forms");
         if (job.printDialog()) {
         try {
         job.print();
         } catch (PrinterException e) {
         System.out.println(e);
    /** The speed and quality of printing suffers dramatically if
    * any of the containers have double buffering turned on.
    * So this turns if off globally.
    * @see enableDoubleBuffering
    public static void disableDoubleBuffering(Component c) {
    RepaintManager currentManager = RepaintManager.currentManager(c);
    currentManager.setDoubleBufferingEnabled(false);
    /** Re-enables double buffering globally. */
    public static void enableDoubleBuffering(Component c) {
    RepaintManager currentManager = RepaintManager.currentManager(c);
    currentManager.setDoubleBufferingEnabled(true);
    i am getting different output on different printers as well. I have classes defined as Printeable that draw forms, each form has 75 questions and they are all done using graphics2D some printer prints all the pages perfectly some other with different margin and on a laser printer i get only one box.
    If it helps someone, for testing, i printed to file (.prn) and read the ouput through Red Titan it's free
    it showed me one box out of 76
    just the first one ????
    possible solution that would help for margin
    http://java.sun.com/developer/JDCTechTips/2004/tt0611.html
    i used book and send printeable class and appended them into the book class
    i am dying to solve this problem and wondering if there is better way for testing and how to make all pages
    compatible for all printers. I want my program to send all forms to printer same format same size
    is there any suggestion?? what am i doing wrong?
    by the way
    bk.append((Printable)componentsToBePrinted[i],pf);
    componentsToBePrinted[] is an array of classes that implements Printeable and they all draw the forms correctly and sends to the printer. It is working mostly but i needed to work on alll printers no exceptions
    I appreciate any help and i will issue all my duke starts im new to posting in the forum but i will give all my points for this tip
    PLEASE HELP

    I want my program to send all forms to printer same format same size is there any suggestion??Produce a PDF... effectively delegating printing there-of to someone else. Problem solvered.
    Your PDF options are (AFAIK) FOP or itext.
    Cheers. Keith.

  • HDMI cable hook up to laptop

    Does it matter what thickness or type of HDMI cable I use to connect my Mac Pro laptop to a TV Monitor?  I'm using one that is thicker than what I usually use and when I hooked it up (I have a Belkin HDMI adapter), my computer would no longer go into sleep mode as it usually does.  I rebooted the computer and the sleep mode works fine now when it's not hooked up the the monitor, but I'm wondering if the type of cable or thickness matters to the performance of the computer or if it can cause any other glitches?

    not as far as I know. Maybe shielding, but from what I understand, it either works or it doesn't, that goes for expensive or cheap HDMI cables.  Maybe the Belkin HDMI adapter doesn't support sleep mode. Oh well, not a deal-breaker, hopefully.  Maybe you got a bum cable?  Maybe you have to mess around with your display options?
    I dunno, just a few ideas......
    JB

  • How do I set the default audio output for all users

    Here's the story. I have a Mac Pro in a classroom that is connected to the audio system via the digital (Toslink) output. The systems are bound to AD and OD with some minor management being performed via MCX (printers, login, etc...)
    When a new user authenticates to the system the output defaults to the internal speakers not the Digital Out.
    My assumption was that I could configure default 0 key in the com.apple.audio.SystemSettings.plist to AppleHDAEngineOutput:1B,0,1,4:2, which is the digital output.
    However it seems that new users are still generated with the Internal Speakers which is AppleHDAEngineOutput:1B,0,1,2:0.
    Is there somewhere else that I can configure that default such that all users will default to the Digital Out, AppleHDAEngineOutput:1B,0,1,4:2? Or am I perhaps not configuring the SystemSettings plist correctly?
    Most of these tasks were previously taken care of by another technician but he has left and I'm quickly trying to pickup the slack for configuration of our Macintosh environment.
    Thanks,
    -alex-

    Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
    If you can figure out how to add the printer name, this can be used to lock the margins.

  • CSV output selects all values returned by htmldb_item.select_list_from_lov

    I have a report with several columns using htmldb_item.select_list_from_lov. When I enable CSV Output (export to Excel) All the values in each of the columns get exported to Excel, not only the one selected in the report. For example. A value of ABC is selected in the report (stored in the database and this is a valid value in the LOV). In the drop down I also have values of DEF, GHI and IJK. I would expect only ABC to be exported, but I actually get ABC, DEF, GHI, IJK (all possible values) instead all displayed in the same column.
    Any ideas?

    I was able to work through this problem. Thank You.

  • Using printer as wireless and USB cable hook-up:

    I have a HP 4502 e all- in-one printer and I want to use it with my old computer with a USB connection and my laptop with a wireless connection. Can I do this without having to disconnect my USB cable to my old computer?

    Hi,
    YES you can have both USB and wireless connection for the same printer. For this you have to install the software on both the computers. For your laptop connect it wirelessly and for your desktop connect it through the USB cable.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!
    Binoy

  • Why does SCXI 1325 give a NaN output at all channels?

    Till yesterday SCXI 1125 was working fine. But today the values that I am getting from all its channels is "NaN". No error is given.
    When I tried running the Test Panels thru NI-MAX, SCXI 1125 still gave a NaN output, while 6040E, 6251 and SCXI 1142 did not.
    Can someone tell me what is the problem and how it can be rectified?
    Setup :
    PXI chasis consisting of PXI 6040E and 6251
    SCXI 1000 chasis consisting SCXI 1142 and 1125
    Connection to SCXI 1000 chassis is thru PXI 6040E
    PXI 6040E connected to SCXI 1142 (accessory SCXI 1304)
    PXI 6251 connected to SCXI 1125 (accessory SCXI 1313)
    Data collection thru Parallel mode
    Thanks
    Jag

    Thanks Kodee for your reply.
    Well this is what I have done so far :
    a) Removed all the SCXI modules and reconnected them. Checked the wiring.
        But still get the same result "NaN" for SCXI 1125
    b) Reinstalled DaQmx drivers
         Still the same NaN result for SCXI 1125
    Also I have now realised that when I try to measure an analog signal thru the module SCXI 1142, I get some varying signal initially followed by a steady 5V signal.
    I am not sure whether this fault was present yesterday when I first came across the NaN problem with SCXI 1125.
    So right now, SCXI 1142 gives a steady 5V output while SCXI 1125 gives a NaN output.
    Could you suggest what I should do next?
    Also in your reply you had asked me to check whether any printer drivers are interuppting NI drivers. How can I check that out?
    Thanks
    Jag

Maybe you are looking for