AV iChat ---does not respond message

I've been reading about iChat problems and see a lot of frustrated people out there and have joined the ranks.
My mother and I successfully AV iChatted Friday night.
My daughter and I AV iChatted Sunday (she could invite me, i couldn't invite her)
My daughter was able to AV iChat with her grandmother Sunday too. But I could not. We could however audio chat.
A week later I cannot audio OR video chat with my mother.
We are getting the "(fill in name of invitor) did not respond" message.
I have opened the ports in my Mac Firewall, and my mother did too--no luck.
I tried to set a static ip address for my computer but cannot because my isp has dynamic DNS and I'm not allowed to according to them.
Am I frustrated? You bet!
I've Mac OS X (10.4.5) on dual processor intel iMac. I connect to the web via Motorola Surfboard S84220 Cable Modem and Netgear 54 Mbps wireless router WGR614v6. My mother is on System: Mac OSX version 10.4.5
Power Book G4 and is connected thru Surfboard Motorola Model SB 5100.
Oh--should I say, I am on .Mac and my mother is AIM?
My husband is beginning to worry about me because I have been glued to my computer--he says there are programs out there to help people like me get over my addiction--i hope so.
iMac dual intel Mac OS X (10.4.5) Motorola Surfboard S84220 Cable Modem and Netgear 54 Mbps wireless router WGR614v6
iMac dual intel Mac OS X (10.4.5) Motorola Surfboard S84220 Cable Modem and Netgear 54 Mbps wireless router WGR614v6
iMac dual intel Mac OS X (10.4.5) Motorola Surfboard S84220 Cable Modem and Netgear 54 Mbps wireless router WGR614v6

Well thanks for your time and input. After playing around with everything for another while, I finally called Apple Care. I figured since I payed for it, I should use it.
They first suggested that my problem lay with the strength of my internet connection. I turned my airport off and hooked up to the internet directly with the cable. When that did not help, we tried one more thing.
It turns out that I had to reset my modem. I unplugged it for 2 minutes--including its cable connection, and then turned everything back on as well as restarting my computer. Voila! it worked.
I have since reconnected my airport and am now operating wirelessly, and iChat is happy again.
Since I am not a technical person, i am probably going to garble this, but it seems that the modem was issuing crumby ip addresses to my computer (?)
Maybe you can make sense of this.
After all of this, it seems like such a simple fix. Maybe you who are experiencing the "did not respond" message can start here before you go to too much trouble setting ports and such.
We'll see if this still works tomorrow.
Good luck!

Similar Messages

Ralph, help! (with "does not respond" message)

My mom said you were the go-to guy on this issue. We have been using iChat AV for video conferencing for about 6 months. Then I switched ISPs, from a cable modem to DSL. Have not been able to make it work since -- we get a "does not respond" message.
Where to begin? The router is the same; the internal firewall is off. Could it be something to do with the new modem, or the new isp? And I saw a recent post here about the November security update as well, so I am wondering if it's actually that.
Thanks in advance.
Juliette
iMac G5 Mac OS X (10.4.2)

Hi Juliette,
As Defcom says, if the modem can route and is not set to Bridge mode (if it can be) then you will need to open Ports.
If you have UPnP then use that as iChat can use this method.
Use Port Triggering if you have mutliple computers and no UPnP. Use Port Forwarding for links to one computer or router.
Only have one DHCP server on your network
Do not use Port Forwarding or Port Triggering twice (Or combo of them)
There is this on the Portforward.com site about Port Triggering for one version of a B90
http://portforward.com/english/routers/port_triggering/Westell/BellSouthB90-2200 30-04/iChat.htm
I would use this for Pics only as the info relies on the App this site promotes which is windows only and the details are wrong after that.
Local port 5678 need to trigger Global port 5060
Local port 5060 needs to trigger Global ports 16384-16403
Local 5190 Triggers 5910
Local 5222 Triggers 5220-5223 (jabber stuff)
Some Jabber logins are on port 5223 so
Local port 5223 triggers 5220-5222 if needed.
Ralph
Ralph

IPad does not respond message "this iPad hasn't been backed up in 2 weeks.Backups happen when this iPad is plugged in, locked, and connected to Wi Fi" if i try to unlock iPad to swicth on Wi-fi as it is not on, the iPad does not respond

iPad does not respond message "this iPad hasn't been backed up in 2 weeks.Backups happen when this iPad is plugged in, locked, and connected to Wi Fi" if i try to unlock iPad to swicth on Wi-fi as it is not on, the iPad does not respond

Reset: Hold the Sleep/Wake and Home buttons until the screen goes dark and the Apple logo appears
To stop the message:
Settings > iCloud > Storage & Backup > Backup Now
iCloud Backup will run automatically on a daily basis if:
- it is plugged into a power source
- it is connected to Wi-Fi
- the screen is locked

IChat does not receive messages after a few hours

I always leave my computer on at night since I often get chats from overseas that I don't want to miss. Ever since I have started using iChat 5, these messages never arrive at my computer anymore. I am also using it in conjunction with AIM on the iPhone. Could that be causing the problems? Ususally the chats arrive on both iPhone and Mac.

Hi,
Welcome to the  Discussions
This can be a case of sorting out whether the computer Sleeps,
Whether it is receiving Off Line IMs,
and How your Forwarding was set up.
Use this page to Login to AIM
https://settings.aim.com/
Once you do that it should return to this page but will have your Name on it.
At that point you can check the Off Line IM status.
If you computer sleeps then ichat may well start faster than the computer reconnects to your LAN - in which case iChat does not login again.
This may mean it is "Missing" IMs when technically iChat is Off line.
I have never set up forwarding but you might have to check device order priorities. If the Phone is Off does it default to the computer ?
Is it supposed to be gong to Both ?
On that Settings page they call it Mobile (rather than Forwarding).
Hope this give you some ideas about where to look.
10:52 PM Saturday; April 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Unable to work, CC does not respond

Unable to work, CC does not respond
Message to launch photoshop or indesign:
Error
There Was an error with this action. Try again later.
e76a857c-681f-4146-b539-161a9832373c
I work on Mac 10.9
thank you

Looks like toad is right. A quick google search on "does not have any corresponding BIOS drive" shows a load of entries going back to 2006. The ones I looked at are same error as you report, and the fix sounds exactly what toad said:
The first Google result was -
http://www.cyberciti.biz/faq/error-devhdx-does-not-have-any-corresponding-bios-drive-and-solution/
Which basically says to do this -
# grub-install --recheck /dev/sda
You did mention recheck in your post. I then read the post again:
> boot arch iso
> mount /dev/sda2 /mnt
> cd /mnt
> mount -t proc proc proc/
> mount -t sysfs sys sys/
> mount -o bind /dev dev/
> chroot /mnt
> grub-install /dev/sda
and you are mounting /dev/sda2 to /mnt but trying to install grub to /dev/sda.
I can't say for sure that's wrong but surely sda2 wont mount to /dev/sda? I may be miles off here admittedly. I can't remember offhand how mount works.
Last edited by RichAustin (2011-09-05 13:38:31)

HT201412 My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

My Ipad is not responding. It has the small apple in the middle of the screen with the little "thinking" flower symbol surrounding it, and does not respond to restoring. We received an error message when trying to restore from itunes.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

I have the latest update. Why does my reader still hang up and give me the "Not responding" message. I'm on Windows Vista.

This is a most frustrating situation. Constantly getting the "not responding" message and any further click of the mouse, and adobe reader goes pale and I have to "end process." What's the deal? This use to be a very reliable program. Now, it's nothing but frustrating and bothersome.

I had the 10.1.10 version and have updated it to the 10.1.11 version. I
restarted my computer. Same old problem. Adobe Reader hangs up anytime I
try to move a document to the second page, for example. Is there an older
version I can go back to to avoid this problem. I'm seeking to view two
documents--both from Windows Publisher saved as pdf files. No luck
Bob
On Tue, Aug 12, 2014 at 10:19 AM, ~graffiti <[email protected]>

"NOT RESPONDING" message whenever I start using my Windows Media Player

I don't know what it is that causes this - if it's something to do with having the lesser expensive Hewlett-Packard computers, but this is the 2nd HP laptop I've had and the one thing I've had in common w/both of them is that, one, I got them for under $500 - about $445 or so, w/tax...anyway, I suppose that the more expensive HPs are better and wouldn't have petty problems like this - but anyway, - the last one I had & this one I currently have - the last one was a Windows 7 and this one is Windows 8, so the O/S has nothing to do w/my problem. Anyway, it's like this: every time I turn on the PC, then get it all revved up & ready to go, etc. when I turn on my Windows Media Player (WMP) the thing comes up on screen and it sometimes takes a few seconds, since I have about 740 CDs worth of music on here, but anyway, once the CDs show up on the WMP album page (where they're put up in alpha. order of LP name, as opposed to artist names, etc) - and so, when I go from the "A"s downward, just paging through it, looking for something to listen to, for instance, it ALWAYS, inevitably, without fail, gets stuck, sometimes sooner, sometimes later, but usually by the time I get to the Cs or Ds, the thing gets stuck and freezes up on me and I can't do anything w/it. Then, when I try to click the mouse a couple times or whatever, I get a message at the top of the WMP box - on the top of the box it reads "Windows Media Player", like usual, but when it freezes up like this and it stays stuck for anywhere from 10 seconds up to a minute sometimes, the message that pops up right next to the "WMP" label on the blue border reads "NOT RESPONDING". 99% of the time, it just takes a little patience and sometimes just clicking the mouse buttons a few times and/or hitting a few keys on the keyboard (not hard, just randomly pressing down on some) - then it will finally come back & unfreeze and I'm usually able to continue browsing through my catalog, but there has been other times when it seems to be in worse shape - it'll read "NOT RESPONDING" for a while and no matter how much I click the left or right mouse buttons, tap the mouse on the pad, or whatever, it might come unstuck for a few seconds, then, I think I'm OK again, but sometimes, as soon as it looks unstuck, I can't get it to move at all and right away the "NOT RESPONDING" message comes right back up (and the page fades a little too) - in fact, lately, just before I did a refresh thing on my PC to try & get things to work better, it was giving me big trouble, it would just sit there, stuck, frozen up and nothing I did would unfreeze it. I'd be frantically trying to unstick it, but no matter what I did, it'd still be frozen and when it does that, I can't get it to do anything. Recently, when it would do this, sometimes, if I had not tried to get too far down in the alphabet, I can get a certain album open and get it to start playing, but the "NOT RESPONDING" message will pop up now and again, but the music will play all right, uninterrupted.
Anyway, this is very annoying. It's been happening for so long now, that I basically take it for granted that it's going to freeze up on me when I 1st bring it up. I have no idea what's causing this to happen; like I said, this happened when I had a previous HP laptop that was working with Windows 7.
Kind of a long-winded way of putting this issue to anyone, but I just wanted to be clear and specific.
Is there ANYONE out there who owns a cheapo HP? (not a Compaq, the computer co. HP bought for that purpose, to make their cheap computers and differentiate them from the HPs) - But I wonder, it's been so long since I've even checked -does Compaq even exist anymore as a separate entity from parent co. HP? If not, then that explains why there's a difference between HP laptops that are $400 or so (at Best Buy) and the more slick, expensive HP laptops that have all the bells & whistles and usually run over $1000. Of course, I'm not about to shell out twice as much money to buy an HP just to see if the more expensive ones don't behave the way their cheap models do. I also had a Toshiba I bought about 3-4 years ago and I had even more problems with that - one instance was when the CD drive went out on me and I had to ship it in to HP (still under warranty, thank heavens) and they put a new drive in and shipped it back to me. It also crashed one time, and got infected with a virus or two or three, which meant I had to re-set the computer back to the original factory settings and, not having an external hard-drive with which to back up all my music, pix, documents, etc (my music is the most important stuff on my computer to me), which meant that I had to go through this long hassle of replacing all the music I'd lost. I have a lot of my own hard copies of CDs, but there were so many more CDs that I didn't have copies of, so I had to visit the library over & over, checking out as many as 25-30 CDs at a time on a lucky day, when the library had a lot of the CDs I needed to replace in my WMP. I don't want this to happen again, so I am going to get an external hardrive but I still don't know for sure if that would work. At least, by resetting the PC to factory settings I was able to get rid of the virus(es) that were screwing my computer up badly
So - has anyone out there had any similar problems? If so, I would appreciate any help or suggestions you may have as to how to deal with this sort of thing.
Thanks a lot. Hope to hear from one of you out there in the future.
Have a nice 4th...
Kent M.

Hello kmanthie,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
I worked on behalf of HP.

ITunes does not respond when I try to play a movie

I just installed the latest iTunes update onto my Windows 64-bit computer and now, whenever I try to watch a movie on iTunes it freezes and does not respond. I have to start the task manager and end the program manually. I have unistalled iTunes and reinstalled it but I still face the problem of iTunes freezing and not responding. I have a pretty good collection of movies and would love to watch them cause well I paid for them but i cant because it keeps FREEZING. Also, it wont let me view trailers on the iTunes store so I'm thinking something is wrong with the 'video' part of my iTunes. Please help.

Although it's not such a good bet with a freeze as with the "iTunes has stopped working" messages, it would do no harm to try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Firefox takes 6 minutes to load and then does not respond so what should I do?

After starting Firefox on my Mac (10.8) it takes 5 to 6 minutes to appear. A minute or so later the "Bookmarks and History system will not be functional because one of the files is being used by another application" message appears and Firefox either does not respond or responds very slowly to various mouse clicks and such. For example, I wanted to disable all plug ins and when I clicked on Tools and Addins it took three minutes for the tab to open and after 20 minutes still nothing had appeared on the tab. I've tried restarting Firefox, restarting the Mac, resetting Firefox to the default settings, starting Firefox in safe mode, renaming the places.sqlite file, uninstalling Firefox and reinstalling from a fresh download, performing a complete uninstall and reinstall in which I remove the Firefox folder from the Application Support folder after uninstalling, and relocating the plugins folder. I've tried just about everything in every Firefox support article that there is and nothing works. Any suggestions would be very helpful.Thanks.

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back soon.

Adobe Reader Does Not Respond in Windows 8

I need to do a simple edit of a pdf. I've been editing pdfs using nothing but the free Adobe reader for years. Now I got a new laptop - 64 bit Windows 8 and I installed the current reader. I need the Adobe reader for other programs I work with. I have noticed that the adobe reader is slow to open and constantly says "not responding." I also cannot get it to respond so that I can fill in a form (i.e., a basic edit), which I could always do. Please tell me how to fix this!

I figured it out! I have Adobe Reader XI on my desktop. I opened it up. I went to Edit/Preferences/Security (Enhanced) and disabled the "Protected Mode at startup." My Adobe pdfs now respond and I can edit them without issue.
Date: Tue, 28 Jan 2014 10:28:26 -0800
From: [email protected]
To: [email protected]
Subject: Adobe Reader Does Not Respond in Windows 8
    Re: Adobe Reader Does Not Respond in Windows 8
    created by Rob McAfee in Adobe Reader Touch for Windows 8 - View the full discussion
Do you have Adobe Reader Touch for Windows 8? Or Adobe Reader XI for Windows desktop?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6061471#6061471
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6061471#6061471
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6061471#6061471. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Reader Touch for Windows 8 at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

My Safari screen is grayed out. It does not respond to touch. How to bring it back to life?

My Safari screen is grayed out. It does not respond to touch. How can I restore it back to life?

Go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad by holding down on the sleep button until the red slider appears and slide to shut down. then hold the sleep button until the Apple logo appears to start up.
You can also reset the iPad by holding down on the sleep button and home button at the same time until the Apple logo appears (takes about 10 seconds) - ignore the red slider.
Message was edited by: Demo

Button does not respond (with attachment)

Hi,
I'm trying to develop a LV program for a psychology experiment to record a participants mouse movements whilst drawing or tracing a picture using the mouse.
My program uses an event structure to generate an event each time the mouse is moved or the mouse button is pressed or released. Upon each of these events the coordinates and button position is recorded to an array.
When they have finished drawing there is a button "Stop & Save" that allows the user to save the coordinate data to a file. This can then be opened by a sister program I'm developing that allows the movements to be replayed and shows where the mouse button was down and up.
At the start of the program there is the option of loading a background jpeg picture to trace over on the screen.
The program then waits for a 'Record' button to be pressed before moving on to record all coordinates there after until the 'Stop & Save' button is pressed.
The problem I have is that the record button does not respond. It doesn't even change state when pressed, even though at that stage it's just sat in a while loop waiting for it to be pressed before moving on to the event structure.
I attach the program for you to look at.
Any help/hints much appreciated.
Thanks,
Dave.
Attachments:
MouseCoordinatesForPW.vi ‏178 KB

altenbach wrote:
Your overall program design is higly flawed. This calls for a single state machine with an event structure that handles all FP events. All your locals can be handled by shift regsters. Get rid of that useless stacked sequence!
Frame 0: Initialization belongs to the left of the state machine. CoordinatesArray should initialize a shift register (no locals needed). Use a boolean shift register to set state to either recording or not. Event for "record, value changed" will switch the boolean to be used on the other states.
Frame 1: "Clear" and "stop" need to be inside their own events. Running it parallel to the event structure is a no-no! Do you really want to record mouse movements on the entire FP or only on the picture area?
Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes no sense.
Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values.
Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead.
Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help.
Message Edited by altenbach on 05-22-2007 09:23 AM
Hi, thanks for your reply.
The reason for the main stacked sequence was to get some order to the program, my programming background's text based and as such I like to think of a program running in a list/sequence order. LabView seems strange when you've been used to programming in asm or C. Does anyone know of any books or online documentation for people migrating from text languages to LV? - I haven't found any.
"Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes sense."
- The string 'CoordsArray' is cleared to make sure it's empty before chars concatanated to it in the next frame. Call me old fashioned but is it not good practice to clear out any junk in a variable rather than just assuming it's empty?
"Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values." - not sure what you mean by that?
"Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead."
- No, it's not an empty string since in the previous frame the coordinates array is converted to numbers and concatanated to it. Trust me, it generates a file with lots of data in so no way is it an empty string!!
- Yes, you could just swap the cases instead of inverting the 'canceled' output but sometimes it reads better to say 'if NOT cancelled then DO theTask, ELSE DO nothing' rather than 'if cancelled DO nothing ELSE DO theTask'. Not sure if that makes sense but I guess it's just personal prefference there.
"Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help."
- I wasn't sure how that one would work. I wanted the final exe version to close the program window when the program comes to the end, what's the best way to do that? In the past I think I used the 'Exit' function but this would annoyingly quit LabView at the end of each trial run whilst still in the development stage.
Thanks,
Dave.

WLS 10.3 Does not respond to GET requests (HTTP/1.0)

Hi All,
I have 2 WLS servers running on separate physical hosts behind a cisco CSS load balancer. The keep-alive method the Cisco CSS uses is HTTP GET messages. This keep-alive method does not appear to work, because my WLS servers are not responding to the GET requests with HTTP 200 OKs (as would be expected). These GET messaged appear in the access logs, as follows, but from traces taken on the host, there are no HTTP 200 messages ever transmitted. I see no exceptions or errors related to this in the server or access logs.
WLS access log:
192.168.1.1 - - [14/Dec/2011:18:23:35 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:45 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:55 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
Interestingly, If i use a http-ping tool to send HEAD messages, the server correctly responds with the 200. A major difference between the CSS and the ping-tool, is that the CSS is using HTTP/1.0 where the ping tool uses HTTP/1.1. The GET requests are formatted a bit differently too. Below is how the different GET messages are formatted. Is it possible that WLS 11g does not support HTTP/1.0? Is there any method of debugging that I can employ to troubleshoot this further? As mentioned I do not see any errors or exceptions in the server logs or access logs....
Many thanks, in advance.
HTTP-PING TOOL HEAD MESSAGE - weblogic responds to this message
HEAD /APPDIR/index.jsp HTTP/1.1
Host: myhost.domain.com:7005
Accept: */*
LOAD BALANCER HEAD MESSAGE -weblogic does not respond to this message
HEAD /APPDIR/index.jsp HTTP/1.0
Connection: Keep-Alive
User-Agent: Mozilla/4.06 [en] (WinNT; I)
Accept: image/gif, image/x-bitmap, image/jpeg, image/pjpeg, image/png, */*
Accept-Language: en
Accept-Charset: iso-8859-1,*,utf-8
Host: 192.168.1.66

Other than failing the base address test, does the device seem to work in the test panels? One quick test would be to open the digital I/O panel, change some of the lines to output, toggle the logic levels, and see if the line states track the logic levels. Also, you can switch to the Counter I/O panel, change the mode to simple event counting, set the event source to the internal 100KHz clock, and start the counter. If the counter is working properly, you should see the counter value increase at a rate of 100000/second.
If the test panels seem to work OK, you may still be able to use the board, despite the resource test failing. I still can't explain why the test fails, though.
Joe

Server does not Respond

When I try to Sync my E61 with Ovi.com I get this message: Server does not respond.
Can someone help me with this?

Sorry, Erga, for the late reply. Yes, I got the sms settings and I can acess the internet. I've already tried removing the device and adding it again to Ovi. I got a new sms but the end result is the same: Server does not respond...

AV iChat ---does not respond message

Similar Messages

Maybe you are looking for