AV - Top Five Audit Sources by Number of Alerts - INTERNAL ERROR

Hi again!
We have one problem with audit vault console while connecting with auditor role.
There's one strange problem that occurs intermitently when clicking on "Top Five Audit Sources by Number of Alerts " graph on audit vault home page.
Sometimes it works perfectly and maybe next time it produces an internal error. It does not follow any logic. Maybe it works 1,2,3,... times and next one it doesn't and the links carriess you to an empty page with "INTERNAL ERROR" message.
It is something related with the url.
When you place the mouse coursor on the graph you can see the url at the bottom of internet explorer/firefox.
It's something like this: (it works)
http://<av hostname>:5707/av/console/database/avt/:::::P2_REPORT_TYPE,P2_DATE_TYPE,P2_SOURCE:WARNING_ALERT,DAY,<source name>
then you continue working come back to home page and place the cursor again on it. Then sometimes you see the same url(all it's going to work) or the next one:
http://<av hostname>:5700/av/console/database/avt/:::::P2_REPORT_TYPE,P2_DATE_TYPE,P2_SOURCE:WARNING_ALERT,DAY,<source name>
As you can see port number has changed misteriously... and it does not work.
The strange thing is that after the error i try to open a new auditor session with another explorer and it some times it works!!! until same thing happens.
Has anyone seen anything like this????? I don't know if it something about Audit Vault configuration, a bug or an internet explorer configuration issue.
i've tried different languages with my explorers and it continues happening ...
All the rest of the parts of the application work perfectly
Thanks!

Whenever posting here ALWAYS include full version number.
Whenever posting an error post the full and complete error message (not your interpretation of it). "INTERNAL ERROR" in and of itself is meaningless.
I would suggest that you open an SR at metalink.

Similar Messages

Audition CS6 gives a MME Device Internal Error on startup

Can anyone help me with the following problem?
I have a system running WIndows 7 with a Xonar DX2 sound card that has worked fine since installation (6 months ago), now when I start CS6 I get the 'MME device internal error' message.
This is a MME sound card and is using its latest drivers (7.12.8.1794).
The Audio Hardware settings are:
Device Class:     MME
Default Input:     Line In (ASUS Xonar DX2 Audio Device)
Default Output:     Speakers (ASUS Xonar DX2 Audio Device)
Master Clock:     Speakers (ASUS Xonar DX2 Audio Device)
Latency:     200ms
Sample Rate:     44100Hz
'Use machine-specific device defaults' is enabled

Windows 7
Lois Maxim
Global Voice Operations
Global ICM/IVR Support
904.954.9876
[email protected]<mailto:[email protected]>
To reach IVR Oncall for production issues, contact information is located at GROUPS in Service Now: GCG NA EX HOSTED IVR PLATFORMS USAN NUANCE ONLY
all customer impacting tickets require the following information for research:
Date of call
Time of call (including timezone)
Line of Business
TFN dialed by caller
ANI of caller

Finding top five number in an array of arraylists.

I have to write a method with a heading
public static int [] findTopFiveMostSteps ( ArrayList [] temp )i will input an array of arraylists, and I have to write this method
that will return a integer array containing the top five number in that
array of arraylists.
I have no idea how to go on about this
please help

How would you do it "manually"? That is, if you just
had pencil and paper and several lists of numbers,
what would be the steps? Keep them very simple and
precise.Socrates would be so proud.
I was just reminiscing about how I once tried to teach Java to the web designer
at my last job. I gave him the task of writing:
static int max(int[] values) He just didn't grok it:
Me: How would you figure it out by hand?
WD: I'd look at the numbers and pick the biggest.
Me: Break that down into steps.
WD: I'd -- look -- at -- the -- numbers -- and -- pick -- the -- biggest.
In the end, we tacitly agreed to stop the teaching and hope the manager didn't notice.

How can I create a view of top five teams averages based on individual averages of that team?

I have created a list that groups teams by their Team name (Team column) with the individuals members (participants column) averages and their team average (total average view option). I want to only display the top five teams that have the overall
top team averages. I have a list that contains a team name, average minutes, week, and participant. The team manager plugs in each week a new entry for each participant on the team. I have a view that computes each team average but I want a view
of the top five teams based on the top averages of the team (not individual participant average). Unfortunately, I can only seem to get all teams grouped with individuals of that team, their individual averages and the team average but can't figure out
only how to show the top five teams top average. Because it's a total (team average) and not a separate column, I can't get a view by team based on total average. I can by top individual average but not by the team. Can some one help me figure
out a solution?

A calculated column won't work because a calculated column can only reference the individual item, not the entire list or a subset.
You could do javascript to build this, but to me it's easier to just use Excel.
Andy Wessendorf | Solution Foundry [email protected]

I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
You can contact iTunes Support via this link : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Source line number in exception trace

Excuse me if the question is silly.
When I print the stack trace after an exception has occured, how is it able to display the exact source line number 'cos the source file may or may not be accessible to the jvm. Obviously they don't keep source line-wise info in the class file,right?

won't class files be large just because of the debug data?
laurivasko@linux:~/java> javac HelloWorld.java
laurivasko@linux:~/java> ls -la HelloWorld.class
-rw-r--r-- 1 laurivasko users 426 2004-06-26 20:07 HelloWorld.class
laurivasko@linux:~/java> javac -g:none HelloWorld.java
laurivasko@linux:~/java> ls -la HelloWorld.class
-rw-r--r-- 1 laurivasko users 341 2004-06-26 20:07 HelloWorld.classas you see, first case has file size of 426 bytes, and other one has wile size of 341 bytes, and that all with 5 line HelloWorld commandline application.
// hopefully that answers your question.

Retrive top five records

how we can select top five records of sal column from emp table.

http://forums.oracle.com/forums/ann.jspa?annID=599
PL/SQL

Selecting top five rows

hi,
pls I have this issue that needs to be resolved. I need to select top five rows from a table depending on the values of a column stock_value. pls I will appreciate if someone can help me out, Francois pls try and help
This is the senerio:
I have a table stock, on the table I have company_name, stock_value, sector.
Now I want to get top five rows from this table depending on the five highest value of stock_value and for each sector.
lets try and write a query that will retrive the records after that I will put it in a procedure.
I know am suppose to ask this on mssql forum but most mssql forums takes time to reply and this is very urgent cos I have to deliver in 45 minutes time
thank you very much
jideofor

hy,
try out:
select s.name, sp. sp_sales total_sales
from salesperson s,
(select salesperson_id,sum(tot_sales) sp_sales
RANK() OVER (ORDER BY SUM(tot_SALES) desc) SALES_RANK
FROM ORDERS
WHERE YEAR = 2006
group by salesperson_id) sp
where sp.sales_rank <= 5 (...n)
and sp.salesperson_id = s.salesperson_id
order by sq.sales_rank;
give result in:
name total_sales
a 100
b 90
c 80
d 70
e 60
hope help you
regards

How to top five minutes and ten minutes record

Hi,
i have to get top five minutes records
group by hostid and cpuid and timestamp is the field
group by
hostid,cpuid
and the group is also based on last 5 minutes or ten minutes or one day
select wait, idle, users, system ,wait+idle+users+system totalusers
from (select hostid,cpuid, avg(wait_to) wait, avg(idle) idle, avg(users) users, avg(system) system from system_cpu where hostid='DSCP02469' and cpuid='first'
group by cpuid,hostid having
max(timestamp)-timestamp<5/1440))
please correct it and send
with regards
shannu sarma
Message was edited by:
user517983
Message was edited by:
user517983

Hi,
SELECT uo.hostid,uo.cpuid,uo.timestamp FROM system_cpu uo
WHERE timestamp >= (SELECT MAX(timestamp)
FROM syStem_cpu uo2 WHERE uo2.cpuid ='cpu1' and uo2.hostid='DSCP02469') - (5 / (24 * 60))HOSTID CPUID
and i even trying in this way but i am not getting right results
hostid='DSCP02469' and cpuid='first'
but other result are also comming due to
som bad sub query.
select cpuid,hostid,timestamp from system_cpu sys where
exists (select hostid,cpuid from system_cpu
where hostid='DSCP02469' and cpuid='first'
having max(timestamp)-sys.timestamp<5/1440
group by hostid,cpuid)
SQL> /
CPUID HOSTID TIMESTAMP
first DSCP02469 29:jun:2006:18:33:01
second dscp02469 29:jun:2006:18:30:18
second dscp02469 29:jun:2006:18:31:04
second dscp02469 29:jun:2006:18:32:53
second dsc02469 29:jun:2006:18:37:36
second dscp02469 29:jun:2006:18:40:39
second dscp02469 29:jun:2006:18:41:26
second dscp02469 29:jun:2006:18:42:31
Message was edited by:
user517983
Message was edited by:
user517983

Top five wait events

Hi,
may i know wat are the most top five events we often expect in statspack.

On a healthy system, physical read waits should be the biggest waits after the idle waits. However, also consider whether there are direct read waits (signifying full table scans with parallel query) or db file scattered read waits on an operational (OLTP) system that should be doing small indexed accesses.
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14211/instance_tune.htm#sthref863

Top five events

Hi,
may i know wat are the most top five events we often expect in statspack.
With Regards
Boo

top five wait events
C.

Assignment from source document number in the query to archived document

Dear all,
we scan all original documents and store them in an optical archive like IXOS. This archive is connected to our ERP-system. An on ERP with the source document number. When I pick up the financial document I have the possibility to open the scanned original document.
In BI we use the cost center cube. One of the characteristics in the cube is the source document number. Now we have the request to jump direct from the source document number in the query to the archived original document.
Is there a possibility to define an assignment from the source document number in the query to the archived original document.
Best regards
Juergen

Thnaks Oscar and Ganesh for your interest.
FYI,my infoset is created based on bill doc and item number which is available in both the ODS.
Here,for every document in Billing ODS,there are more number of documnets in Condition ODS,so the bill qty is getting added according to the numvber of records in Condition ODS.
Eg.Billing ODS: Doc Num:100012, Qty = 8.if 10 records are ther in condition ODS,then in the infoset my QTY becomes,
Doc Num:100012, Qty = 80.
So in the query i divided it by number of records to get the qty and is coming correctly for documnet wise report.
Problem comes when i remove documnet from the report and drilldown to higher level,say material,then it is calculated wrongly.
Your suggestions plz..
Regards
Sudhakar

Cisco ASA, skipping real source port number with PAT.

Hi Experts,
Cisco ASA configuration guide says:
"PAT translates multiple real addresses to a single mapped IP address by translating the real address and source port to the mapped address and a unique port. If available, the real source port number is used for the mapped port. "
Is it possible to skip this ? I do not want to use real source port number. The issue is, when I have a PAT entry with real source port (port 5060), - SIP session doesn't work. With all the other ports numbers,- everything works.

Hi,
Notice that the configuration you try does not modify the real source port at all.
Since you are using the same "object" for the real/mapped service then the configuration above matches traffic where the connections destination is "any" and the destination is "udp 6000 65535" and only when the source is "udp sip" and in that event it keeps the exact same "udp sip" source port as you are using the same "object".
I am not sure if its a software or configuration related issue but I have not gotten this to work reliably on my ASA. I might have to try some other software level.
I guess you would want to match the SIP source port in the Dynamic PAT and avoid using the SIP port as the mapped port?. With that in mind I was thinking something like this
object service UDP-SIP
service udp source eq sip
object service UDP-SIP-MAPPED
service udp source range 30000 31000
nat (VoiP,outside) source dynamic <source network object> interface service UDP-SIP UDP-SIP-MAPPED
Though it seems the above configuration seems to be bypassed by the ASA completely and it seems to use the identical source port as the mapped port even though it matches the configuration.
If I were to change the above configuration from "dynamic" to "static" then the configuration matches but it uses only the first mapped "source" port of "30000". I guess it would only use a different mapped port if you used multiple real source ports also instead of the current single source port "sip".
nat (VoiP,outside) source static <source network object> interface service UDP-SIP UDP-SIP-MAPPED unidirectional
Example from my own ASA.
DYNAMIC
- Matches the configuration but doesnt map the port at all
Phase: 5
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (LAN,WAN) source dynamic LAN-NETWORK interface service SIP SIP-MAPPED
Additional Information:
Dynamic translate 10.0.0.123/5060 to <my pat ip>/5060
STATIC
- Matches the configuration and maps the source port but only uses the first mapped port from the range
Phase: 4
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (LAN,WAN) source static LAN-NETWORK interface service SIP SIP-MAPPED unidirectional
Additional Information:
Static translate 10.0.0.123/5060 to <my pat ip>/30000
I am not really sure if this configuration is reliable at all but its the only thing I can think of at the moment.
Hope this helps :)
- Jouni

Getting Current Source Line Number

I am pulling my already sparse hair out trying to perform the most remedial of tasks: I am trying to trace my code execution to debug it and to log error messages, which is done in C with something like the ubiquitous
'printf ("%s:%d\n", __FILE__, __LINE__);'
I can't for the life of me find anything like __FILE__ and __LINE__ in Java.
How do I determine the current source line number??? I could live without the __FILE__ part if I had to, but the line number is imperative. Where do I get it?
Thanks,
Bill Rebey

"debug" still being a hard work in Java... the oldest Java nightmare :^)))
you may avoid this problem using labels in your code (the problem you must fill your code with debug stuff - if the code is a big one, you will get crazy about that :^) )
or you may adopt a tool able to trace your code execution....
JBuilder do it for you...
Togheter is another good software available out there
(unfortunatelly, both of them are really expensive...)
I don�t remember now about other tools.. (the java has a flag to produce debug output - check in the forum about the debug syntax....)

OnDemand after Source Clocked give "internal error status -88700"

Hi,
I am using Analog Input and Counter Input simultaneously with a shared internal clock source on the NI PCIe-6363
I'm running on WinXP, with NIDAQmx Driver 9.1.1f0
I start off by doing some OnDemand acquisitions and it all works.
Then I configure the task for Sample Clocked acquisitions and everything works.
Then I try to configure the task back to OnDemand using DAQmxSetSampTimingType, but when I start the task I get "DAQmx Error: An internal error occurred. Status Code : -88700"
If I ignore the error and try to acquire samples, I get a blue screen of death and the PC reboots.
DAQmx Error: An internal error occurred.
Task Name: MyTaskCI
Status Code: -88700
I tried unreserving the task, and setting the sampling timing type back to on demand, with input buffer size to 0 (also tried 1, and 1000, neither worked). I noticed that going to sample clocked mode changed various properties. I tried manually setting the data transfer mechanism back to programmed io, and disabling CI memory mapping but that did not help. Additionally I tried setting the sampling mode to finite, and number of samples per channel to 1 but that didn't help either. I also tried setting the sample clock source back to blank, but that didn't help. I am not sure if there's something else I am missing. I tried reading all the properties I thought might be getting changed by sample clocked mode, and re-applying them - but that didn't work either.
Please find attached a simplified peice of code (adapted from the NIDAQmx ANSI C Example program: ContAcq-IntClk-EveryNSamplesEvent.c) to reproduce the issue.
Your feedback is greatly appreciated.
Thanks,
hemdanw
The MathWorks
Attachments:
BufferedAICI.c ‏9 KB

Hi Falk,
Change detection does two things:
Reads digital input channels when a change occurs on a set of digital input lines.
Optionally provides a (non-periodic) trigger or clock for another task, such as digital output, analog input, analog output, or counters.
This secondary functionality is only useful when you want to detect changes on multiple input lines and treat them as if they are the same, or if you want the input lines to be sensitive to both rising and falling edges. Since you only want your digital output task to look at rising edges on a single line, you can use a PFI line instead of using change detection. The cDAQ-9172 supports PFI lines in slots 5 and 6, so move the NI 9421 to slot 5 or 6.
> Suppose I connect a button to the digital input an I want the output to be triggered when I press the button.
Okay, that partially explains what you're trying to do. How many samples do you want to output when the button is pressed?
If you want each button press to output one sample, then run "Write Dig Chan-Ext Clk.vi" with "Physical Channels" set to "cDAQ1Mod1/port0/line0:7" and "Clock Source" set to "/cDAQ1Mod5/PFI0" (with the NI 9421 in slot 5). Every time you press the button, the output will change once, assuming that the button is debounced.
If you want each button press to output a waveform containing many samples, then ideally you would be able to run "Write Dig Chan-Int Clk-Dig Start.vi", but this uses DIO triggering functionality that isn't supported by the cDAQ-9172. To emulate this functionality on the cDAQ-9172, you would need a combination of "Gen Dig Pulse-Finite-Dig Start.vi" and "Write Dig Chan-Ext Clk.vi". Start the DO task first because it will wait for the sample clock.
If the button is not debounced, you may also want to enable digital filtering on PFI0 (or build a debounce circuit). I don't know of a good example showing how to do this. Maybe someone else has an example to recommend?
Brad
Brad Keryan
NI R&D

AV - Top Five Audit Sources by Number of Alerts - INTERNAL ERROR

Similar Messages

Maybe you are looking for