Availability of Windows 7 Starter CD for HP j4580; bought w/Windows XP Starter CD
Is my HP j4580 all in one even compatable w/Windows 7 OS? If so, from where can I download software & drivers; or is a Windows 7 Starter CD availabe for this printer?
nosrub,
Welcome to the HP Forum.
You can download and install the Full Feature Software for the printer from the printer's website.
Be sure to take a look at the Updates for the printer software after you install the main software package. Read the Update description and decide whether to install it.
General Instructions to Install the Printer Software
· Create a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
· Open HP Drivers & Downloads
· Enter your Printer Model information
· Select your Printer from the “Results” list
OR
· Open HP Officejet J4580 All-in-One Printer Drivers
· Enter your Operating System in the Drop-down menu
· Click NEXT and Scroll down
· Look for category Driver - Product Installation Software
· Select the Basic Driver, e-print, or Full Feature Software
· Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
If available, you may wish to download the Print and Scan Doctor and / or other programs from Category – Utilities
HINT:
Install Utilities / Tools first; the little installation packages are smaller in size
· If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
· Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
· Scroll the video list back and forth until you find the video that most closely matches your situation.
· USB connection: Download and install the driver software before connecting a USB cable.
· Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
· After the initial installation is complete and working, check / install Category - Update
There is valuable information at the printer’s website, including manuals, how-to pages, a Troubleshooting and SOLUTIONS section, and alerts and notifications for your printer. Be sure to take an extended look at what is available. Bookmark the page.
Click the Kudos Thumbs-Up to show appreciation and say Thanks.
Click Accept as Solution when the Answer is a good Fix or Workaround to your Question!
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur
Similar Messages
-
Windows update requirements for Xerox print drivers on Windows 2003 server
Hello, We are currently deploying a fleet of Xerox MFD's across ~100 locations, and we are running into an issue installing the print drivers on some Windows Server 2003 (32bit) boxes. (both the machine specific driver, as well as the Xerox Global print driver) The print driver installs fine, but no jobs will actually print, and if you try and print a test page, an error "Test page failed to print. Would you like to view the print troubleshooter for assistance?" comes up instantly. We have seem to have narrowed the problem down to a missing Windows update, as if we do all available High Priority and Optional updates, it starts to work fine. Does anybody know specifically which Windows updates are a requirement for the driver? Our 2003 servers were last fully updated about a year ago, and due to time constraints, if we could just install the Windows updates that are needed it would be a big help. Thank you in advance
When Xerox dropped support for XP, they stopped adding particular files from the driver packs (probably for size reduction) because they were all included by default in every newer OS. If you install this here on any XP/2003 base machines it will work as normal. It is best to install that before the driver install, but I have been mostly lucky to have it work fine days later. YMMV
-
Does anyone besides me find it odd that calendar.app assigns a start time for an all day event?
Does anyone besides me find it odd that calendar.app assigns a start time for an all day event?
Hi SharpBud,
The date for all day event stored in SQL in GMT time, the start time for an all day event returns the start time in GMT time, which is not the current time most likely.
This is a confirmed issue, as a workaround, I would suggest you to use a calculate column for the event for the column, using the following format:
IF(TEXT(([End Time]-[Start Time])-TRUNC(([End Time]-[Start Time]),0),"0.000000000")="0.999305556",IF([Start Time]=ROUND([Start Time],0),[Start Time],DATE(YEAR([Start Time]),MONTH([Start
Time]),DAY([Start Time])+1)),[Start Time])
Thanks,
Qiao Wei
TechNet Community Support -
Default Start Variant for VF04
Any Info on Default Start Variant for VF04.
Regards,
MDear Manisha,
Default Start Variant for VF04
There are two types of variant in VF04.
One is the selection variant before clicking the Display Billing List Button.
You can set the start variant via SE93 using the Change mode.
The second variant is the Billing Layout display variant.
This is after clicking the Display Billing List Button.
After creating your layout display variant, you can set it by clicking :-
Settings ->
Display Variant
-> Administration
Select the layout display variant you want and click :-
Edit ->
Define default settings
Regards,
Rakesh -
Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.
Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
RonSee Troubleshooting issues with iTunes for Windows updates.
tt2 -
Unable to Start Listner for 10g R2 after windows xp pro restart.
Database worked just fine until a system reboot after installing the Apache server and Apex 2.2 The service start and I'm able to connect to the database SQL*PLUS without specifying the host string
SQL*PLUS
User Name: xxxxx
Password : xxxxx
Host String: <Blank>
connect without any problem.
Once I include the orcl name I can't connect and get the following error message
TNS-12541: TNS: no listner
LSNRCTL> start
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL>
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
#Oracle Database 10g Enterprise Edition\
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listner.ora as following
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
I have another home for the Apache Server.
Everything was just fine, Oracle, Apache, EM, and Apex.
I checked the path for windows it looks good, checked the registery looks good, two homes listed.
When I check the status for the LISTNER is win Service it show start
OracleOraDb10g_home1TNSListener
I have another listner OracleOraDb10g_home1TNSListenerLISTNER1 I don't know why it's there?
TNSPING ORCL WORKS
WITH THE SAME EORROR MESSAGE
PING WORK FOR THE HOST IP NO PROBLEM.
Please see the following to Analyze the Problem:
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl status orcl
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:24
:50
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(C
ONNECT_DATA=(SERVICE_NAME=orcl)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:23
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
C:\oracle\product\10.2.0\db_1\BIN>path
PATH=C:\oracle\product\10.2.0\Db_1\bin;C:\oracle\product\10.2.0\Db_1\jre\1.4.2\b
in\client;C:\oracle\product\10.2.0\Db\jre\1.4.2\bin;;C:\oracle\product\10.2.0\db
\bin;C:\oracle\product\10.2.0\db\jlib;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\
System32\Wbem;"C:\Program Files\Zone Labs\ZoneAlarm\MailFrontier";C:\Program Fil
es\Common Files\Roxio Shared\DLLShared;D:\Program Files\Microsoft Visual Studio\
Common\Tools\WinNT;D:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin;D
:\Program Files\Microsoft Visual Studio\Common\Tools;D:\Program Files\Microsoft
Visual Studio\VC98\bin
C:\oracle\product\10.2.0\db_1\BIN>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 16 21:26:44 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: system
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> show user
USER is "SYSTEM"
SQL> select name from v$database;
NAME
ORCL
SQL>
IN THE PAST I WAS ABLE TO CONNECT TO ALL BUT NOW,
I'M UNABLE TO LOGIN TO APEX NEITHER EM DUE TO ORCL LISTNER.
Like I said before I have no problem connecting to SQL*PLS, BUT I can't Login to orcl APEX nor EM.
Any suggestion or solutions is really apreciated. I'm looking forward to hear from you ACES.......
Thank You Very Much,
MhndHi
Check this out.
TNS-12560: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification.
For further details, turn on tracing and reexecute the operation. Turn off tracing when the operation is complete.
TNS-00530: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: For further details, turn on tracing and reexecute the operation.
Proposed Solution on metalink.
Solution Description:
=====================
Delete the protocols in your "listener.ora" file that you do not use.
Edit the "listener.ora" file and look at the protocol section. Make sure that
only the protocols that you use on your system are there (i.e., TCP, IPC, ...)
and that there are no entries listed for SPX or NMP (named pipes).
Regards
Adnan
Since you are only using TCP I don't think that is the issue. You should turn on tracing to get more details.
Message was edited by: Adnan
amashhadi -
Unable to Start Listner for 10g R2 after windows xp pro restart. Please!
Database worked just fine until a system reboot after installing the Apache server and Apex 2.2 The service start and I'm able to connect to the database SQL*PLUS without specifying the host string
SQL*PLUS
User Name: xxxxx
Password : xxxxx
Host String: <Blank>
connect without any problem.
Once I include the orcl name I can't connect and get the following error message
TNS-12541: TNS: no listner
LSNRCTL> start
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
LSNRCTL>
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
#Oracle Database 10g Enterprise Edition\
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listner.ora as following
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\Db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
I have another home for the Apache Server.
Everything was just fine, Oracle, Apache, EM, and Apex.
I checked the path for windows it looks good, checked the registery looks good, two homes listed.
When I check the status for the LISTNER is win Service it show start
OracleOraDb10g_home1TNSListener
I have another listner OracleOraDb10g_home1TNSListenerLISTNER1 I don't know why it's there?
TNSPING ORCL WORKS
WITH THE SAME EORROR MESSAGE
PING WORK FOR THE HOST IP NO PROBLEM.
Please see the following to Analyze the Problem:
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl status orcl
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:24
:50
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(C
ONNECT_DATA=(SERVICE_NAME=orcl)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:23
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\oracle\product\10.2.0\db_1\BIN>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:25
:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Service OracleOraDb10g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
C:\oracle\product\10.2.0\db_1\BIN>path
PATH=C:\oracle\product\10.2.0\Db_1\bin;C:\oracle\product\10.2.0\Db_1\jre\1.4.2\b
in\client;C:\oracle\product\10.2.0\Db\jre\1.4.2\bin;;C:\oracle\product\10.2.0\db
\bin;C:\oracle\product\10.2.0\db\jlib;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\
System32\Wbem;"C:\Program Files\Zone Labs\ZoneAlarm\MailFrontier";C:\Program Fil
es\Common Files\Roxio Shared\DLLShared;D:\Program Files\Microsoft Visual Studio\
Common\Tools\WinNT;D:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin;D
:\Program Files\Microsoft Visual Studio\Common\Tools;D:\Program Files\Microsoft
Visual Studio\VC98\bin
C:\oracle\product\10.2.0\db_1\BIN>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Mar 16 21:26:44 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: system
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> show user
USER is "SYSTEM"
SQL> select name from v$database;
NAME
ORCL
SQL>
IN THE PAST I WAS ABLE TO CONNECT TO ALL BUT NOW,
I'M UNABLE TO LOGIN TO APEX NEITHER EM DUE TO ORCL LISTNER.
Like I said before I have no problem connecting to SQL*PLS, BUT I can't Login to orcl APEX nor EM.
Any suggestion or solutions is really apreciated. I'm looking forward to hear from you ACES.......
Thank You Very Much,
MhndHi
Check this out.
TNS-12560: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: Check addresses used for proper protocol specification.
For further details, turn on tracing and reexecute the operation. Turn off tracing when the operation is complete.
TNS-00530: "protocol adapter error"
Cause: A generic protocol adapter error occurred.
Action: For further details, turn on tracing and reexecute the operation.
Proposed Solution on metalink.
Solution Description:
=====================
Delete the protocols in your "listener.ora" file that you do not use.
Edit the "listener.ora" file and look at the protocol section. Make sure that
only the protocols that you use on your system are there (i.e., TCP, IPC, ...)
and that there are no entries listed for SPX or NMP (named pipes).
Regards
Adnan
Since you are only using TCP I don't think that is the issue. You should turn on tracing to get more details.
Message was edited by: Adnan
amashhadi -
My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.
At present I have no power to the Gen 7, so need to get some power to it I think. I pressed the buttons as you suggested, but nothing is showing up at this point. Thank you for your response as the more I can rule out before I take it back the better I think.
-
Hi Communitiy.
I have a window desktop and have had itunes for ever. The latest update failed and I am getting a strange error message. "Apple mobile Device failed to start. Verify that you have sufficient privledges to start system service."
I have iphones and I am wondering if a sync of iphone and I tunes has somehow screwed up everything.
The update will not load. I have even tried uninstalling itunes and reinstalling.
I get the same exact message as before.
I am stuck as to what to try or do.Hello Clage,
The following article provides steps that can help get the Apple Mobile Device service sorted.
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Cheers,
Allen -
The finder window for an external USB hard disk suddenly started separating files by time (today, yesterday, etc.) and stopped allowing me to change column width, order, etc. Also the header bar shifted to flat white from gray.
All was normal until the icon for the disk stopped showing up on the desktop when I would plug it in. I rebooted the computer, and the disk icon now shows up but this new look to the finder window started as a result. The hard disk does not have this problem when I use it on another Mac running Snow leopard. Also, two other external hard disks that I use on this computer running lion 7.4 still have the normal header bars with columns that can be reordered, etc.
I have tried looking in preferences and other places but have not seen this discussed.Well duh - I finally figured out that somehow in the View options for the hard drive, the "arrange by" option had been changed to "by date" from "none". Not sure how that happened, I had never used the "view options" menu tem before. Changing "arrange by" back to "none" gets the gray column headers and the collapsible folder icons back.
-
I have recently started seeing millions of pop-up ads on website pages. It is not something that normally happens. They open new windows with ads for online gambling, online dating among other things. I am growing sick and tired of these ads, and have tried multiple things. I have uninstalled and reinstalled software, I have blocked pop-up ads and unenabled Java script. I have tried everything I could find, but nothing has worked. I have even downloaded AdBlock and Clean Genius. Nothing has even remotely changed this annoying trait. I hope this can be a quick fix I can perform and not something that will have to be done by a tech-hand. Please, if you know anything about this issue, let me know how to fix it.
Thanks.Unfortunately, you have installed malware by clicking on a pop up ad.
Removal instructions here >> The Safe Mac » Adware Removal Guide
Uninstall CleanGenius > Mac App uninstaller: How to uninstall the Macintosh applications with CleanGenius uninstaller on Mac OS X?
Third party maintenance utilities are not necessary on a Mac and can actually do more harm than good and cannot remove malware > Mac App uninstaller: How to uninstall the Macintosh applications with CleanGenius uninstaller on Mac OS X? -
My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up. I've run Disk Permissions and have verified my hard drive and all is in order. What do I do to start up my Mac in a normal manner?
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
With Windows 7 Home Premium, whenever I start iTunes, I get a message that colors have been reverted to Windows Basic because iTunes won't support my Windows Aero configuration. Is there a fix for the incompatibility? I don't mind the color changes, but I'm having an external speaker problem that could be related to the incompatibility (at random times--usually several hours after start-up, my external speakers--connected via my Samsung Central Station's wireless docking station and computer-installed dongle--shut off and won't play until I restart. I've investigated other options, but iTunes may be the problem.) Thanks.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
ast computer i was able to make 3 profiles and run 3 windows. each time it asked for the profile when i wanted to start each window. how can i set that up again
last time some1 set it up for me. i would only have 1 shortcut on my desktop. everytime i clicked on it, it would ask me which profile i wanted. even if i had 1 or 2 of the others open it would still ask me which profile i wanted to open. i want to be able to do it that way again.
yes i already set up the 3 profiles. but once i open up the one profile, and click on the short cut to open another, it just opens a brwser window with the profile in use. so i could open 10 windows, its only 1 profile, the first profile i used.
and yes i have the box not checked
Maybe you are looking for
-
Please help. Just the last week or so (maybe since Apple released a new software update for my Airport, I keep getting kicked off the net and can't reconnect - it doesn't even show my wifi network in the list of available networks. I am considering r
-
Issues syncing photos to the new iPad
I just got the new iPad and wanted to transfer all my pictures and videos from my windows 7 toshiba laptop. I connected with the setting sync all photos including video checked. The sync wouldn't transfer all photos and kept missing one album and non
-
CC trial will not load. ANy help would be great. The desk top, pop-up shows the loading icon, just spinning around and nothing happens. I have downloaded a 2nd trial, with same results. I don't want to buy CC unless I can get the trial to work. Thank
-
Lightroom Mobile 1.1.0 iOS 8 Crash when sharing to Instagram
I upgraded to iOS 8 just last night. One of the first things I did is try out Lightroom Mobile. It crashes immediately at startup. Is this systemic or possibly localized to myself? Message was edited by: Ignacio Barrientos
-
I'm presently evaluating the WebLogic products. Couple of questions WLPS requires WLS? Yes Are WLCS and WLPS completely separate products? or is WLPS part of WLCS? Alex