Availability at Storage Location Level

Dear All,
While creating a sales order system is checking the material stock at the plant level it is including the stock in all the storage location
we have several storage locations in the plant
Hence i want to restrict the availablity to be done only for one storage location that is sales storage location
Kilndly Advise
Mohammed Raees

Just try to populate the stock storage location in the sales order using user exit USEREXIT_MOVE_FIELD_TO_VBAP in program MV45AFZZ (or Userexit_Source_Determination in program MV45AFZB.). By this way, the system will check only in the particular storage location.
Also check the link, which discussed similar requirement Re: Availability Check - Storage Location
Regards,

Similar Messages

MCHB,MARD - Stock available at plant level and storage location level

Hi ,
How to determine how much stock available at Storage location level and Plant level. (Lot is not maintained).
In MCHB-Stock at lot level is shown.
In MARD-Stock at Storage Location level is shown lncluding
the stock maintaned at the lot level.
If i want to know the stock which is not maintained in Lot, i.e, Stocks directly maintained at Storage location / Plant.
Do I need to subtract the MCHB Value from MARD Value ?
Is there any other way available to find the stocks which is not maintained at lot level.
Regards
Prasath

Hi prashant,
What do u mean by stock maintained at SL level without batch level. Do u mean that some materials are subjected to batch management and some or not?
If that is the case, for all batch managed materials, u can see the stock at batch level and also same is summed up at SL level. But still what ever u are getting from MARD table isstock at SL level only.
If u have activated batch management for any material, it will always be shown at lot level also.
hope this clarfifies query
award points if found useful

Availibility check at Storage location level

Dear all,
we have implemented inventory management ( not wm and lean wm ) , my business scenerio is when i am creating the STO the availibility check is carried out which is considering all the storage locations of supplying site
e.g SL01 - Unrestritrd Use
SL02 - Damage
SL03 - Resrved
My client requiremnt is when availibility check should carried out it should conside only one storage location i.e SL01 - Unrestricted use stock and should not considere Stock of other storage location except SL01.
What configuration need to be done
Thanks and Regards
tara

Dear,
Check at: http://www.sap-img.com/sap-sd/configuring-availability-check-through-checking-groups.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-log-pp/availability-check-storage-location-1283776..
Regards,
Syed Hussain.

Storage Location level ATP check with CRM

Hi:
I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
Some background on supply
EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
Please share any experience that you may have in this.
Thanks,

Hi Satish,
In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
What we did is as follows:
- We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
Plant A - AFC
Plant B - AFC
Plant C - AFC
- We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
I hope this helps.
Please let me know if you have any questions.
Thanks,
Anupam
Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM

Storage Location Level ATP check through CRM

Hi:
I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
Some background on supply
EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
Please share any experience that you may have in this.
Thanks,
Satish

Hi Satish,
In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
What we did is as follows:
- We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
Plant A - AFC
Plant B - AFC
Plant C - AFC
- We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
I hope this helps.
Please let me know if you have any questions.
Thanks,
Anupam
Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM

Re: ATP check at storage location level in sales order.

Hi ,
I have a requirement wherein storage location is determined in my sales order, the ATP check is done at plant level as well as storage location level , and the smaller of the two quantities is taken as the result of the ATP check.
My requirement is that the ATP check should only be performed at storage location level .
Please suggest if there is any standard setting available in SAP.
iF NO , PLEASE SUGGEST SUITABLE USER EXIT, WHERE I can add my requirement.
Regards,
Nilesh

Hi Nilesh,
in SAP standard the system is always checking on plant level first and then on the storage location level, there is no possibility to change this behaviour.
I'm also not sure if the process is correct, because if you have also requirements on plant level only then you would create negative ATP if you confirm on storage location level even though there is no ATP on plant level.
I'm also not aware of a user-exit that would suite your requirement, additionally according to the IMG documentation the user-exits in the availability check area should only be carried out in agreement with SAP.
Regards,
Markus

Availablity check at storage location level in STO

Hi,
There is an unique requirement from my client with respect to the Availability check at storage location level in STO
Process:
Based on the inputs from APO we are creating STR for moving the material from one plant to another plant. These STR’s will be converted into STO through ME59N batch job. During STO creation process system will do the availability check and only if stock is available in the issuing plant then only STO will be generated.
During this availability check the stock will be considered at plant level and not at storage location level.
Requirement/Scenario:
Issuing plant contains two storage location ( location A & B).FG stock exists in both the locations.
Our requirement is system should create separate line items in the STO based on the availability of the stock in the respective storage locations.
Example
Total required qty: 1000 of material X
material X - Stock in Storage location A : 600
material X - Stock in Storage location B : 400
Two separate line item needs to be created in the STO
Sl no
Material
qty
Issuing storage location
1
X
600
A
2
X
400
B
Is there any function module available for doing Availability check at storage location level so that it can be called in ME59N with the enhancement.
Please suggest how to achieve this. If any enhancements needs to be done we will do it.
Thanks & regards,
Prashanth

Hi Nilesh,
in SAP standard the system is always checking on plant level first and then on the storage location level, there is no possibility to change this behaviour.
I'm also not sure if the process is correct, because if you have also requirements on plant level only then you would create negative ATP if you confirm on storage location level even though there is no ATP on plant level.
I'm also not aware of a user-exit that would suite your requirement, additionally according to the IMG documentation the user-exits in the availability check area should only be carried out in agreement with SAP.
Regards,
Markus

ATP at storage location level

Hi Gurus,
Can anyone help me how to check ATP at storage location level in the plant in Order and delivery processing.
I have seen configuration that ATP will happne at the plant level.
Venkat

Hi,
Availability Check at Storage Location Level
Example:
Plant stock (1000 pieces) is made up of the stock from storage location 1 (800 pieces) and the stock from storage location 2 (200 pieces). Requirement 2 in amounting to 500 pieces is to be withdrawn from storage location 1. This storage location currently contains 800 pieces. However, requirement 2 cannot be completely confirmed at plant level as only 300 pieces are available. Therefore only 300 pieces are confirmed for requirement 2. If the system confirmed the full requirement quantity, the availability of the confirmed issue 1, for which the issue storage location has not been specified and which draws on plant stock, would be jeopardized as it would be short of 200 pieces.
If the storage location is excluded from planning or if it is planned separately, then there is no longer the need for an additional check at plant level since stock from this storage location is not contained in plant stock.
If a storage location is excluded from planning or if it is planned separately, the check cannot be activated without a storage location (see Scope of the Availability Check).
http://help.sap.com/saphelp_46c/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Regards,
nandha

Material block for sale in plant-storage location level

Dear experts,
Please help me how to block a material to sale in plant-storage location level.
Thank you.
Regards,
Badruddoza

The standard sales block (MVKE-VMSTA) in material master is valid for sales organisation / distribution channel combination (VKORG, VTWEG) - this means you cannot do it for Plant / SLoc combination,
What does it mean to block it at plant / sloc level? Generally in SO you do not specify the storage location. Or you are speaking about MRP also? In this case you could use SLoc-MRP (with proper availability check in delivery) for your material but the problem is that a plant might be assigned to several sales area and this SLoc would be hidden for them also.
Could you please specify what would you like to achieve, what sales block means according to you?
Regards,
Csaba

ATP Check issue for storage location level

Hi Experts:
   I met a problem when carry out the ATP check, when I create the SO for material A 1 pcs and not maintain the storage location in sales order, ATP carried out and gave me the proposal delivery date(100 days later) for about this material, the system can not check the storage location level.
   the real situation is for material A, in stock 1000 has 100 pcs, in stock 2000 has 50 pcs, and in stock 3000 has 30 pcs.
   How can the system automatic check the storage location level even I not fill in the storage location in the sales order?
Thanks and best regards
Jin

Jin,
For this check
1)Youe storage location shd be automatically determined..Make sure you've done all settings in 0vlk/0vlp..
2)In MMR-MRP2 make sure you have entered Prod Storage Location..Also in OVZ9 check what stocks you have selected for ATP for particular check rule..
3)Also in VA02 Go to Environment-Availability overview..
REWARD IF U FINDS THIS AS HELPFUL..
Regds
MM

Availability Check - Storage Location

Hi,
Is it possible to exclude a Storage location from Sales Order availability check? If yes, where do we maintain the SLoc exclusion?
e.g. Sloc 01 - FG Staging Area, Sloc 02 - FG Central whse...
We want that availability check should not look at Sloc 01 quantity ...
Thanks,

Hi
There are 4 ways of achieving this
1. You can exclude the storage locations trough S Loc MRP settings. check the MRP4 view of your material master > MARD-DISKZ controls how the S Loc is considered in relation to a material.
2. Please check the transaction OVZ9.
There will be one check box - No storage location inspection.
I think, by checking this check box, it won't check for the material at storage location level.
It will check only at the plant level.
3. spro...material management....consumption based planning....planning...define storage location MRP...
Here give plant name and enter...
Against every storage location you ll have indicators for excluding, including the stock....
4.Go to SPRO> Production>Material Requirements Planning>Planning>Define Storage Location MRP per Plant
For production storage loc put 1 -->Storage location stock excluded from MRP
By doing this it will not consider the production storage loc qty while running availability check .Go to SPRO> Production>Material Requirements Planning>Planning>Define Storage Location MRP per Plant
For production storage loc put 1 -->Storage location stock excluded from MRP
By doing this it will not consider the production storage loc qty while running availability check..
Regards
Raja

Reg : client level data,plant level data,storage location level data

hi
when we enter the data mm01 we select views.these views are based on cleint level,plant level,storage location level .i want the difference between all the three levels.how do we differentiate.

As per our business process there are one company and in which many plants and storage location are available. In which many materials are available in different plant in different storage location.
As per SAP Standard structure: -
Company >> Company code1 & Company code2... >> Plant 1 & Plant 2 & Plant 3 .... >> Storage location 1 & 2 & 3........
And in all plant and storage location have different data.
Suppose in one plant we do quality testing for material and it may be possible in other plant we not perform quality testing for material. So in this case for same material quality data is different for different plants.
Client Level: - Means data is same for all plant level like Basic data
Plant Level: - Means data is based on plant level like Purchasing, Plant data, Quality data, Accounting view.
Storage location level: - Means data is based on storage location level, for different storage location data will be different like Storage location stock data ..
Due to this you can maintain different data on plant level & storage location level.
Regards,
Mahesh Wagh

Opening and closing stock at storage location level

Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
Samuel

Hi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas

Opening and closing Stock report at Storage location level- date wise

Dear all
Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
Thanks
Sam

Do I have the option of selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
pls gudie
sam

MC.9 drill down at storage location level

In mc.9 report stock against plant xxxx at storage location drilldown
I see
In total valuated stock is 0
But
at storage location 0040 I see 423.686 as valuated stock
and at storage location 5M06 I see minus 423.686 as valuated stock
Client need to have not stock at plant level.
In total I see 0
But client is bothering about valuate stock he is getting at storage location level.
Thanks,
Kiran

Hi Jurgen,
For plant xxxx there is nil stock in mc.9 report. only I see sloc to sloc transfer of qty. for example sloc 0001 has qty + 100 & sloc 0002 has qty -100.
Finance is asking to user that this + - qty should not show in mc.9 and asking him to get it removed.
What should I suggest to user and finance.
Thanks,
Kiran

Availability at Storage Location Level

Similar Messages

Maybe you are looking for