Availability Check in planned Order & Production Order
Dear All,
How can I achieve the same Availability Check (missing Parts ) output in Planned Order & Production Order.
Currently in Availability check in Planned Order is bit different in the sense, I have the Component in Stock without any reservation. But in Planned Order it shows in Missing part.
But if I convert this Planned Order to Production Order, it is not visible in Missing parts which is correct.
I want to have the same missing part report for both Planned Order & Production Order.
Thanks
Regards'
Raghu
Dear Brahmankar,
Thanks for replay.
Now i did, the said possibility, in OPJK is different from my Regular material master rule.
When i see, availability in MD12 it shows the material available, and same as in Production Order check as well.
But when, I use MDVP, for check. the same planned order shows the same component as missing.
am i on the right track?
Please suggest.
Thanks
Regards
Raghu
Similar Messages
-
PRT Availability check quantity information in production order
Hi
Material PRT availability check is carried out in Production Order. This gives me the information like PRT is available or PRT is missing. It does not show how much is available or how much is missing like it shows for Material availability.
I understand that there may be the reason behind this.
But i want to know is it possible to get the quantity information also in the availability check of PRT in Production Order.HI
As per my knowledge Its not possible to check the quantity of PRT at the time of Production order....You will have to seperately check the same.
Regards,
Anand. -
Control availability check during release of production order
friends,
Can you guys help me find the user exit/BADI which will allow me to control the release of production order after the availability check is complete.
In detail, the scenario is that : based on a flag on material master, I should be able to ignore this product's availability during release. I cannot change the availability check to "KP" ( No check) as this product can be sold seperately. So what I thought was that if I get to control the availability check during production order release I would be able to ignore this product before check or may be after check and before the status change.
I found PPCO0021 exit and function module EXIT_SAPLCOZR_003 which is actually intended for release control for automatic batch determination. I am not sure if I can use this.
Please let me know if you guys have any idea.
Thanks
Prod_PlannerLet me rephrase the scenario :
I have a production order for a product P1 which consumes raw materials R1 and R2. R1 is supplied by a nearby vendor every 1 hour to my plant so I do not need to worry about the availability of it when releasing the order but R2 availability should be taken into consideration. So, function 1 or 2 in OPJK will not work (as release need to be stopped if R2 not available) hence I will be using 3. If I use 3, R1 availability is also considered hence the whole order is not released. I will maintain a flag on material master so if R1 has flag, I need to ignore R1's availability but still considering R2.
As mentioned, I found PPCO---21 which could help me but need your help to understand if there is any other way.
Thanks
Prod_Planner -
Checking material availability during conversion planned to production orde
Hi All,
Please could you advise a way how to setup automatically conversion planned to production orders through material availability check, and in case of component unavailability to make system schedule start date as overall components availability date.
I also need that in case of material availability is unknown, SAP should not convert planned to production order.
thank you,
Regards, AndreyDear,
Please refer my reply from this link,
opjk
Regards,
R.Brahmankar -
Disabling GATP for planned orders/production orders
Hi,
We have a scenario where we need to disable ATP check for production orders happening through GATP. That is, ATP check for production order materials should happen in SAP R/3. This is a problem because we have activated ATP check in integration models for sales orders and it is happening through GATP. Production Planning is happeninig in R/3 and we dont have either PP/DS or SNP in APO. ..only GATP.
any pointers on how the ATP check for planned orders/production orders can be blocked in GATP for the same materials which are active for sales order GATP check?
Thanks.hi Pawan /Prasun /vikas
Thanks for your helpful answers
@Pawan : Since we have recently gone live with production planning and its in the process of stabilizing we do not want to enable ATP check for production orders in GATP yet. Also since we are also using batch-determination with ATP check in production orders we still have to check how the system responds with the combination. Therefore,as of now, we dont intend to switch on ATP for production orders in GATP.
@ Prasun : I understand there would be a user exit (EXIT_SAPLATPC_001) which would help in doing GATP check based on order type/business event. However my concern is if the order does not belong to any of the order types will the system do a normal standard ATP check in APO or it will do a ATP check in R3 ? Our programmers are still looking how to tweak it but any pointers based on your experience will be helpful
Thanks -
Hi,
what is meant by planned and production order?
I have to list planned order,production order and stocks that are cancelled or rejected?
How to do that?
ASAP
thanx,
sudhaHi,
A planned order is sent to a plant and is an MRP request for the procurement of a particular material at a determined time. It specifies when the inward material movement should be made and the quantity of material that is expected.
It can be changed or deleted at any time (exceptions: planned orders for direct production and for direct procurement).
Planned orders are converted into production orders for in-house production and into purchase requisitions for external procurement.
In contrast to planned orders, production orders and purchase requisitions are fixed receipt elements, which commit to the procurement.
By means of table,
Planned order is : PLAF-PLNUM ;
and Production Order is AFKO-AUFNR .
You can trace the relationship by using tcode : MD13 ( PlOrder) and MD4C (PrOrder).
Rgds,
TS Winedya -
Find Planned and Production Orders
Hi all ,
I have a requirement . If i give the Work center Name i should get already assigned Planned Orders or Open Production Order against that Work center .
Please let me know . If there is no standard FM then let me know can i retrieve those from any tables .
I appreciate for any suggestions .
Regards
RajHello Raj
Please note that your "objective" (Find planned and Production Orders) has little to do with object orientation.
Function module BAPI_ALM_ORDEROPER_GET_LIST is probably the one you are looking for. You need to feed TABLES parameter IT_RANGES with the appropriate values.
Please note that the selection parameters have special names that can be found in the structures defined in fm IBAPI_ALM_ORDEROPER_GETLIST:
* set some local constants:
constants:
lc_progname like rsvar-report value 'RIAFVC20',
lc_par_int type ddobjname value 'IBAPI_ORDER_LISTOPER_PARAMS',
lc_par_ext type ddobjname value 'BAPI_ALM_ORDER_LISTOPER_PARAMS',
lc_sel_int type ddobjname value 'IBAPI_ORDER_LISTOPER_SELOPS',
lc_sel_ext type ddobjname value 'BAPI_ALM_ORDER_LISTOPER_SELOPS'.
Example: If you want to select for a specific work center then I assume the selection parameter is:
(BAPI_ALM_ORDER_LISTOPER_SELOPS-) OPTIONS_FOR_WORK_CNTR
Thus, to select for a given work center add the following record to IT_RANGES:
FIELDNAME = 'OPTIONS_FOR_WORK_CNTR' " presumably without the DDIC structure name
SIGN = 'I'
OPTION = 'EQ'
LOW = <work center>
If the selection does not work then just do a little debugging.
Regards
Uwe -
MRP: how to avoid Purchase orders/ Production orders generation
Hello,
I would like to know how can I avoid the generation of purchase orders / production orders for MRP execution. I am interested in knowing which are going to be my future needs for a material running the MRP, but I am not interested in generating any new Purchase order / Production order.
I've been changing some parameters in the MRP 2 tab: procurement type, but I think that it is also related with MRP type or MRP group or both. With the procurement type I've only been able to change the purchase requisitions to planned orders and viceversa.
Any suggestions?
Thank youHi Cristian,
W/o MRP run you cannot get the requirements at lower level.
Please understand:
FG - Stock 10, IndReq 20; Halb - Stock 5; RM - Stock 2
> MRP run >
FG - Stock 10, IndReq 20, PldOrd 10
Halb - Stock 5, DepReq 5, PldOrd 5
RM - Stock 2, DepReq 3, PurReq 3
So, via MRP run the requirements are calculated with planning proposals together. As I told you this is material requirement planning, this is the very purpose of MRP.
If you only want to display the stocks and requirements, create a query / riport for this purpose and use the appropriate filter.
Csaba
(sorry, refresh button helps only if you change the PO, PrdOrd, etc > one level under the material you can see the effect)
Edited by: Csaba Szommer on Sep 2, 2008 1:42 PM
Edited by: Csaba Szommer on Sep 2, 2008 1:43 PM
PLEASE NOTICE THAT W/O MRP-generated-PldOrd YOU WON'T GET THE DepReq.
Edited by: Csaba Szommer on Sep 2, 2008 1:50 PM
Edited by: Csaba Szommer on Sep 2, 2008 1:51 PM -
Can we obtain Inspection lots against a Process Order / Production Order
Can we obtain Inspection lots against a Process Order / Production Order on time basis i.e hourly or day wise against the same order
HI
i think there is no this option.Like Plant maintenance ther is no scheduling tool.
or you have to go with stability studies...
-ashok -
To include sales order/ production order characteris in COOIS
Hi,
We are using Variant configuration in our project.
In COOIS transaction, we need to include the sales order/ production
order (configuration) characterisitcs in the output screen.
We may need around 20 characterisitcs from sales order/ production
order to be displayed.
Kindly help us on how to add these fields.
Also,we are looking for characteristics in input selection screen of
COOIS.
Thanks & Regards,
Atul.Hi
See these notes
SAP Note 615206 - COOIS: BAdI order delay in IOHEADER
SAP Note 806375 - COOIS: Order delay Business Add-In in IOHEADER
SAP Note 615176 - COOIS: BADI for predecessor status
SAP Note 434123 - Filling and displaying own fields in information system
SAP Note 363327 - COOIS/CO26/CO28: Change list of fields that can be displayed
I hope this helps you
Regards
Eduardo -
BAPI for Sales Order & Production Order
Hi Experts,
1)i need to Identify standard BAPI's for Sales Order & Production Order.ie for one BAPI need both sales order and production order.
2)i need to Identify standard BAPI to return delivery number and shipment number for a particular Sale Order. If any one give me answer thanks for advance. it's really helpful for my project.
thanks and regards,
bala.Hi Bala
Kindly do not open duplicate threads for the same topic. Help to close one thread and continue with the other to avoid confusion.
Kind Regards
Eswar -
Sales order / production order
Hi
In sales order / Production order when they run KKAK - RA there are 5 orders that is not showing up but when they reconcile it to GL there is a difference in the amount of these 5 orders are showing up as negative and these 5 orders are in WIP. what could be the reason for not showing the 5 orders in the report.
Thank you.<b>Sales Order Tables:</b>
VBAK Sales Document: Header Data
VBAP Sales Document: Item Data
<b>Production Order Tables:</b>
AFKO Production Order Header
AFPO Production Order Position (details)
MAST Material BOM
STKO BOM Header
STPO BOM Positions (detail)
<b>Purchase Order Tables:</b>
EKKO Purchasing Document Header
EKPO Purchasing Document Item
MKPF Header- Material Document
MSEG Document Segment- Material
Regards,
Maha -
Differrence Between Process Order & Production Order
What is differrence between Process Order & Production order apart from that process order is used in process industry & other one in discrete mfg ??
Hi
there isn't really any difference. The main difference is in master data: Routing vs. Recipe.
as you have mentioned, prodn. orders are used for discrete, repetitive & virtual mfg scenarios whereas process orders are used for process industries (chemicals, pharmaceuticals etc.,) where the prodn. is non-stop.
You can use production order or process order for the same scenario even when you are in a process industry. It is your decision to use either one, but you have to know that process order is more appropriate when you have more machine integrations and interfaces. Process order, as well, requires more master data than production order since you are clubbing both BOM & Routing in the master recipe.
also Process Order can handle batch management and joint production scenario in a better way in comparison to the production order. Also in process order you can maintain the inprocess instructions and special control paramters for production via the process instruction key and control recipe which is not there in a prodcution order.
hope it helps
regards
Srinivas -
Bapi or Function Module to do the availability check for Planned Orders
Hi all,
I need a Bapi or a Function Module to do the availability check for a Planned Orders. Anyone knows how?
I will use it in an Exit.
Thanks in advance
Points will be givenI think I found it.
If anyone is searching for it too, we will use these one:
CO_ZA_AVAIL_CHK_ORDER_MULTI -
Availability Check in planned order
Hi Everyone,
What is differecnce between MDVP collective ATP check and MD12 ATP.
I am getting different result for the same planned order.
could you plase tell me why this so.
Thanks
SiddheshHI R.Brahmankar,
Thanks for your quick replay.
But I am getting different results for same materil in MDVP and MD12 Component Avail check.
I am not getting the logic why the system is giving this results.
can you please tell me the same.
Thanks a lot in Advance.
Siddhesh
Maybe you are looking for
-
How to View by Collection AND Tag - Newbie Needs Good Documentation
I am a self-study student trying to decide whether upgrading to Elements (or better) is worth it. I am comparing Adobe and Microsoft products. In Album Starter 3.2, all I want to do is one simple task: View pictures by Collection AND category. (I've
-
JetForm und SAP Interactive Forms
Hallo zusammen, ich habe eine Frage. Ein Kunde von uns benutzt JetForm für die Druckausgabe mit einem ERP baan. Jetzt soll SAP ERP 6.0 eingeführt werden und künftig möchten die Kunden SAP Interactive Forms by Adobe benutzen. Soweit ich weiß, gab es m
-
I have a subscription but have no page to add contacts or call land lines
I just applied for the free month of international calling but my profile does not allow me to add contacts or call numbers. Any suggestions?Pat
-
Ever since I updated to 2.0, my playbook has been glitchy. Apps close down randomly. My computer will randomly not be able to read the table at all. I can't even see the files on my tablet on my desktop. I am so mad. I feel like this is the most frus
-
USER_EXIT / BADI for the TAXCODE in ME22n
Hi Is there any USER_EXIT / BADI for the TAXCODE in ME22n Plz reply